• There are no items in your cart

IEC 60068-2-38:2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

09-12-2022

Language(s)

English - French, Spanish, Castilian

Published date

01-12-2009

FOREWORD
1 Scope
2 Normative references
3 General
  3.1 Description of the test
  3.2 Application of the test
4 Description of test chamber
  4.1 Chamber for exposure to moisture
  4.2 Chamber for exposure to cold
5 Severities
6 Testing procedure
  6.1 Preconditioning
  6.2 Initial measurements
  6.3 Conditioning
  6.4 Test cycle
      6.4.1 Description of temperature/humidity subcycle
      6.4.2 Description of cold subcycle
      6.4.3 Description of 24 h cycles with no exposure to cold
      6.4.4 Description of final cycle
  6.5 Final measurements
      6.5.1 At high humidity
      6.5.2 Immediately upon removal from the chamber
      6.5.3 After final drying
7 Information to be given in the relevant specification
8 Information to be given in the test report

IEC 60068-2-38:2009 provides a composite test procedure, primarily intended for component type specimens, to determine, in an accelerated manner, the resistance of specimens to the deteriorative effects of high temperature/humidity and cold conditions. The major changes with regard to the previous edition concern the updating of the figures, changes to some of the wording and editorial corrections made for clarification.

DevelopmentNote
Stability Date: 2018. (10/2012)
DocumentType
Standard
Pages
29
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

15/30323442 DC : 0 BS EN 62679-4-2 ED 1.0 - ELECTRONIC PAPER DISPLAYS - PART 4-2: ENVIRONMENTAL TEST METHOD
13/30287730 DC : 0 BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
02/206148 DC : 0 IEC 60603-7-5. ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, SHIELDED)
BS EN 60068-1:2014 Environmental testing General and guidance
16/30353588 DC : 0 BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 62149-9:2014 Fibre optic active components and devices. Performance standards Seeded reflective semiconductor optical amplifier transceivers
CEI EN 60603-7-1 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
DIN EN 16882 E : 2017 ROAD VEHICLES - SECURITY OF THE MECHANICAL SEALS USED ON TACHOGRAPHS - REQUIREMENTS AND TEST PROCEDURES
12/30270756 DC : 0 BS EN 61076-3-104 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
BS ISO/IEC 11801-1:2017 Information technology. Generic cabling for customer premises General requirements
BS ISO 17363:2013 Supply chain applications of RFID. Freight containers
BS EN 62149-4:2010 Fibre optic active components and devices. Performance standards 1300 nm fibre optic transceivers for Gigabit Ethernet application
BS EN 60539-1:2016 Directly heated negative temperature coefficient thermistors Generic specification
11/30244681 DC : 0 BS IEC 62706 - RADIATION PROTECTION INSTRUMENTATION - ENVIRONMENTAL, ELECTROMAGNETIC AND MECHANICAL PERFORMANCE REQUIREMENTS
IEC PAS 60603-7-3:2004 Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
02/206147 DC : DRAFT AUG 2002 IEC 60603-7-4 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, UNSHIELDED)
15/30331587 DC : 0 BS EN 61189-5-503 - TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-503: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - CONDUCTIVE ANODIC FILAMENTS (CAF) TESTING OF CIRCUIT BOARDS
CEI EN 61300-2-21 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-21: TESTS - COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST
BS EN IEC 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies General test method for materials and assemblies. Conductive anodic filaments (CAF) testing of circuit boards
I.S. EN 60068-1:2014 ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE
I.S. EN 62326-20:2016 PRINTED BOARDS - PART 20: PRINTED CIRCUIT BOARDS FOR HIGHBRIGHTNESS LEDS
IEC 60249-3-3:1991 Base materials for printed circuits - Part 3: Special materials used in connection with printed circuits - Specification No. 3: Permanent polymer coating materials (solder resist) for use in the fabrication of printed boards
IEC 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
IEC 61747-5:1998 Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods
EN 60603-7-5:2010 Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
EN 61249-8-7:1996 Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks
EN 61747-5:1998 Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods
EN 61753-053-3:2004 Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment
EN 62326-4-1:1997 Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification - Section 1: Capability Detail Specification - Performance levels A, B and C
EN 60068-3-4:2002 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
DIN EN ISO 4611:2011-04 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
EN 62878-1-1:2015 Device embedded substrate - Part 1-1: Generic specification - Test methods
EN 61193-3:2013 Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing
I.S. EN 60603-7-1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
BS EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters
08/30173382 DC : DRAFT AUG 2008 BS ISO 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS
17/30352704 DC : 0 BS IEC 62149-10 ED1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 10: ROF (RADIO OVER FIBER) TRANSCEIVERS FOR MOBILE FRONTHAUL
BS IEC 61275:2013 Radiation protection instrumentation. Measurement of discrete radionuclides in the environment. In situ photon spectrometry system using a germanium detector
15/30329729 DC : 0 BS EN 61076-3-122 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT APPLICATIONS IN HARSH ENVIRONMENTS
BS EN 62326-20:2016 Printed boards Printed circuit boards for high-brightness LEDs
17/30361901 DC : 0 BS EN 61076-3-125 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - DETAIL SPECIFICATION FOR 2-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION UP TO 600 MHZ WITH CURRENT CARRYING CAPACITY
14/30295051 DC : 0 BS ISO 19095-4 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 4: ENVIRONMENTAL CONDITION FOR DURABILITY
BS EN 61753-053-3:2004 Fibre optic interconnecting devices and passive components performance standard Continuously variable attenuators for category U - Uncontrolled environment
06/30151992 DC : DRAFT JUN 2006 BS ISO 22239-2 - ROAD VEHICLES - CHILD SEAT PRESENCE AND ORIENTATION DETECTION SYSTEM (ISOCARE) - PART 2: RESONATOR SPECIFICATION
CEI EN 62149-4 : 2011 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 4: 1300 NM FIBRE OPTIC TRANSCEIVERS FOR GIGABIT ETHERNET APPLICATION
PREN ISO 4611 : DRAFT 2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
BS EN 16882:2016 Road vehicles. Security of the mechanical seals used on tachographs. Requirements and test procedures
BS EN 62878-1-1:2015 Device embedded substrate Generic specification. Test methods
I.S. EN 61193-3:2013 QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV))
03/118275 DC : DRAFT NOV 2003 BS EN 14803 - IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
14/30295038 DC : 0 BS ISO 19095-1 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 1: GUIDELINES FOR THE APPROACH
01/714407 DC : DRAFT OCT 2001 ISO/DIS 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS
BS EN 60068-3-4:2002 Environmental testing Supporting documentation and guidance - Damp heat tests
06/30152213 DC : DRAFT JUNE 2006 BS EN 60603-7-1 ED. 2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
BS EN 61300-2-21:2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Composite temperature/humidity cyclic test
I.S. EN 61249-8-7:1999 MATERIALS FOR INTERCONNECTION STRUCTURES - PART 8: SECTIONAL SPECIFICATION SET FOR NON-CONDUCTIVE FILMS AND COATINGS - SECTION 7: MARKING LEGEND INKS
BS ISO 16750-4:2010 Road vehicles. Environmental conditions and testing for electrical and electronic equipment Climatic loads
CSA T568.2 : 2005 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS
ISO 17363:2013 Supply chain applications of RFID Freight containers
CEI EN 60068-3-4 : 2002 ENVIRONMENTAL TESTING - PART 3-4: SUPPORTING DOCUMENTATION AND GUIDANCE DAMP HEAT TESTS
IEC 60539-1:2016 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
BS EN 60603-7 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS
IEC 61076-3-104:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
I.S. EN 61747-5:1999 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS
IEC 62946-01:2018 Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A
IEC 61643-21:2000+AMD1:2008+AMD2:2012 CSV Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
IEC PAS 61076-3-110:2002 Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz
I.S. EN ISO 4611:2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
EN 60603-7:2009/A1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008/A1:2011)
DIN EN 16882:2017-06 ROAD VEHICLES - SECURITY OF THE MECHANICAL SEALS USED ON TACHOGRAPHS - REQUIREMENTS AND TEST PROCEDURES
BS 2011-1.1:1989 Environmental testing General and guidance
BS CECC 50000:1987 Harmonized system of quality assessment for electronic components. Generic specification: discrete semiconductor devices
11/30244521 DC : 0 BS EN 61076-3-100 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ
BS EN 61076-3-110:2016 Connectors for electronic equipment. Product requirements Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
EN 61076-3-122:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
13/30287806 DC : 0 BS EN 60539-1 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
09/30207352 DC : 0 BS EN 62149-4 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 4: 1300 NM FIBRE OPTIC TRANSCEIVERS FOR GIGABIT ETHERNET APPLICATION
10/30206257 DC : 0 BS EN ISO 4611 - PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
BS EN 60603-7-1:2011 Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors
13/30279156 DC : 0 BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
BS EN 62326-4:1997 Printed boards Rigid multilayer printed boards with interlayer connections. Sectional specification
BS EN 120000:1996 Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices
CSA C22.2 No. 61010-2-012 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
BS EN 61193-3:2013 Quality assessment systems Selection and use of sampling plans for printed board and laminate end-product and in-process auditing
15/30319425 DC : 0 BS EN 61076-3-121 - ELECTRICAL CONNECTORS - PART 3-121: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED HIGH DENSITY CONNECTORS FOR DATA TRANSFER AND WITH POWER OVER ETHERNET CAPABILITIES
05/30131385 DC : DRAFT MAR 2005 IEC 61156-1 ED 3 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION
UNE-EN 61020-1:2011 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
BS EN 60068-2-30:2005 Environmental testing Tests. Test Db and guidance: Damp heat, cyclic (12 h + 12 h cycle)
NF EN 60861 : 2008 EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
IEC 62326-4:1996 Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification
NF EN 60603-7-3 : DEC 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-3: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 100 MHZ
ISO 12097-3:2002 Road vehicles Airbag components Part 3: Testing of inflator assemblies
I.S. EN 16882:2016 ROAD VEHICLES - SECURITY OF THE MECHANICAL SEALS USED ON TACHOGRAPHS - REQUIREMENTS AND TEST PROCEDURES
BS EN 61643-21 : 2001 LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS
IEC 60326-9:1991 Printed boards - Part 9: Specification for flexible multilayer printed boards with through connections
BS EN 50173-1:2011 Information technology. Generic cabling systems General requirements
IEC 62679-4-2:2016 Electronic paper displays - Part 4-2: Environmental test methods
EN 50173-1:2011 Information technology - Generic cabling systems - Part 1: General requirements
ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
I.S. EN 61076-3-104:2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
I.S. EN 62149-4:2010 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 4: 1300 NM FIBRE OPTIC TRANSCEIVERS FOR GIGABIT ETHERNET APPLICATION
IEC 60861:2006 Equipment for monitoring of radionuclides in liquid effluents and surface waters
IEC TS 63066:2017 Low-voltage docking connectors for removable energy storage units
IEC 62326-4-1:1996 Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification - Section 1: Capability detail specification - Performance levels A, B and C
IEC TR 62866:2014 Electrochemical migration in printed wiring boards and assemblies - Mechanisms and testing
IEC 60603-7:2008+AMD1:2011 CSV Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
IEC 61249-8-7:1996 Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks
IEC 60603-7-1:2011 Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
EN 14803 : 2006 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
I.S. EN 14803:2006 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
UNI EN ISO 4611 : 2011 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
EN ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
BS EN 61076-3-122:2017 Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
NF EN 60603-7 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS
03/100166 DC : DRAFT JAN 2003 IEC 60603-7-5 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
ISO/IEC 11801-1:2017 Information technology — Generic cabling for customer premises — Part 1: General requirements
BS EN 62326-4-1:1997 Printed boards. Rigid multilayer printed boards with interlayer connections. Sectional specification Capability detail specification. Performance levels, A, B and C
11/30252977 DC : 0 BS EN 61747-10-2 - LIQUID CRYSTAL DISPLAY DEVICES - PART 10-2: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS - ENVIRONMENTAL AND ENDURANCE
13/30277857 DC : 0 BS EN 62149-9 ED 1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 9: SEEDED REFLECTIVE SEMICONDUCTOR OPTICAL AMPLIFIER TRANSCEIVERS
BS IEC 60861 : 2006 EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
00/201245 DC : DRAFT FEB 2000 IEC 62029-1 - COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 1: GENERIC SPECIFICATION AND TEST METHODS
15/30322686 DC : 0 BS EN 16882 - ROAD VEHICLES - SECURITY OF THE MECHANICAL SEALS USED ON TACHOGRAPHS - REQUIREMENTS AND TEST PROCEDURES
13/30264600 DC : 0 BS EN 60747-14-8 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-8: SEMICONDUCTOR SENSORS - CAPACITIVE DEGRADATION SENSOR OF LIQUID
14/30298357 DC : 0 BS EN 61076-3-110 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ
BS IEC 62679-4-2:2016 Electronic paper displays Environmental test methods
NF EN 62326 4-1 : 1998 PRINTED BOARDS - PART 4: RIGID MULTILAYER PRINTED BOARDS WITH INTERLAYER CONNECTIONS - SECTIONAL SPECIFICATION - SECTION 1: CAPABILITY DETAIL SPECIFICATION PERFORMANCE LEVELS A, B AND C
CEI EN 61189-5-503 : 1ED 2017 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARD AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-503: GENERAL TEST METHOD FOR MATERIALS AND ASSEMBLIES - CONDUCTIVE ANODIC FILAMENTS (CAF) TESTING OF CIRCUIT BOARDS
CEI EN 60068-2-30 : 2006 ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
BS ISO 12097-3:2002 Road vehicles. Airbag components Testing of inflator assemblies
CEI EN 61076-3-122 : 1ED 2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS
BS EN 123400:1992 Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections
16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
05/30116657 DC : DRAFT MAY 2005 ISO 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS
NF EN 60603-7-4 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
PD 6521:1988 Summaries of test methods for environmental testing of electrotechnical products
BS EN 60603-7-5:2010 Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
NF EN 60068 2-30 : 2006 ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB AND GUIDANCE: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
03/100336 DC : DRAFT MAR 2003 IEC 60603-7-7 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ
03/100165 DC : DRAFT JAN 2003 IEC 60603-7-2 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-2: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment
CEI EN 50173-1 : 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 60068-2-30:2005 ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
CSA T568.2 : 2005 : R2010 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS
BS QC 960000:1992 Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Generic specification
I.S. EN 61010-2-012:2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
I.S. EN 61076-3-122:2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS
I.S. EN 61189-5-503:2017 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARD AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-503: GENERAL TEST METHOD FOR MATERIALS AND ASSEMBLIES - CONDUCTIVE ANODIC FILAMENTS (CAF) TESTING OF CIRCUIT BOARDS
I.S. EN 60603-7:2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008)
ISO/TS 22239-2:2009 Road vehicles Child seat presence and orientation detection system (CPOD) Part 2: Resonator specification
IEEE 802.3-2012 IEEE Standard for Ethernet
I.S. EN 61643-21:2001 LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS (IEC 61643-21:2000 (EQV) + CORRIGENDUM MAR. 2001 (EQV))
DIN EN 16882:2015-09 (Draft) ROAD VEHICLES - SECURITY OF THE MECHANICAL SEALS USED ON TACHOGRAPHS - REQUIREMENTS AND TEST PROCEDURES
I.S. EN 61020-1:2009 ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC PAS 61076-3-124:2016 Connectors for electronic equipment - Product requirements - Part 2-124: Detail specification for 10-way, shielded, free and fixed connectors for I/O and Gigabit transmission capability for industrial applications
I.S. EN 61076-3-110:2016 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ
IEC 60326-10:1991 Printed boards - Part 10: Specification for flex-rigid double-sided printed boards with through connections
I.S. EN 62878-1-1:2015 DEVICE EMBEDDED SUBSTRATE - PART 1-1: GENERIC SPECIFICATION - TEST METHODS
IEC 60326-11:1991 Printed boards - Part 11: Specification for flex-rigid multilayer printed boards with through connections
EN 60539-1:2016/AC:2017-09 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017)
DIN EN 14803 E : 2006 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
PD IEC/TR 62866:2014 Electrochemical migration in printed wiring boards and assemblies. Mechanisms and testing
IEC 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
ISO 4611:2010 Plastics Determination of the effects of exposure to damp heat, water spray and salt mist
IEC 61747-1:1998+AMD1:2003 CSV Liquid crystal and solid-state display devices - Part 1: Generic specification
IEC 61193-3:2013 Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing
IEC 61076-3-110:2016 Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
IEC 62149-9:2014 Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers
IEC 61275:2013 Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In situ photon spectrometry system using a germanium detector
IEC 60068-3-4:2001 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
BS EN 14803:2006 Identification and/or determination of the quantity of waste
IEC 62149-4:2010 Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
UNE-EN 16882:2017 Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures
IEC 61300-2-21:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test
EN 62326-4:1997 Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
EN 16882:2016 Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures
IEEE 1594-2008 IEEE Standard for Helically Applied Fiber Optic Cable Systems (Wrap Cable) for Use on Overhead Utility Lines
I.S. EN 60068-3-4:2002 ENVIRONMENTAL TESTING - PART 3-4: SUPPORTING DOCUMENTATION AND GUIDANCE - DAMP HEAT TESTS
01/207165 DC : DRAFT OCT 2001 IEC 61076-3-110 ED.1 - CONNECTORS FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED APPLICATIONS - PART 3-110: DETAIL SPECIFICATION FOR 8 WAY CONNECTORS FOR FREQUENCIES UP TO 600 MHZ [CATEGORY 7 DETAIL SPECIFICATION]
17/30334978 DC : 0 BS EN 62946-01 ED 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 01: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED HIGH DENSITY CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ AND WITH CURRENT CARRING CAPACITY UP TO 1A
I.S. EN 50173-1:2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
10/30218335 DC : 0 BS EN 60603-7-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
BS EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment Generic specification
13/30264596 DC : 0 BS EN 60747-14-7 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-7: SEMICONDUCTOR SENSORS - FLOW METER
09/30213890 DC : 0 BS EN 61076-3-110 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-110: DETAIL SPECIFICATION FOR SHIELDED, FREE AND FIXED CONNECTORSFOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ
BS IEC 62706:2012 Radiation protection instrumentation. Environmental, electromagnetic and mechanical performance requirements
NF ISO 16750-4 : 2004 ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS
IEC 61747-10-2:2014 Liquid crystal display devices - Part 10-2: Environmental, endurance and mechanical test methods - Environmental and endurance
PD IEC/TS 63066:2017 Low-voltage docking connectors for removable energy storage units
CEI EN 61249-8-7 : 1997 MATERIALS FOR INTERCONNECTION STRUCTURES - PART 8: SECTIONAL SPECIFICATION SET FOR NON-CONDUCTIVE FILMS AND COATINGS - SECTION 7: MARKING LEGEND INKS
BS EN 61076-3-104:2017 Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
ISO 16750-4:2010 Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads
04/30063259 DC : DRAFT JUL 2004
I.S. EN 61300-2-21:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-21: TESTS - COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST
I.S. EN 60861:2008 EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
CEI EN 60539-1 : 2009 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
NF EN 61249 8-7 : 1997 MATERIALS FOR INTERCONNECTION STRUCTURES - PART 8: SECTIONAL SPECIFICATION SET FOR NON CONDUCTIVE FILMS AND COATINGS - SECTION 7: MARKING LEGEND LINKS
IEEE C62.35-2010 IEEE Standard Test Methods for Avalanche Junction Semiconductor Surge-Protective Device Components
I.S. EN 62149-9:2014 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 9: SEEDED REFLECTIVE SEMICONDUCTOR OPTICAL AMPLIFIER TRANSCEIVERS
BIS IS 15934-5 : 2011 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS
IEC 60300-3-5:2001 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
I.S. EN 60539-1:2016 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
I.S. EN 61753-053-3:2004 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD; PART 053-3: CONTINUOUSLY VARIABLE ATTENUATORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
EN 61076-3-104:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
IEC 61753-053-3:2004 Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment
IEC 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs
BS EN ISO 4611:2010 Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
EN 61643-21:2001/A2:2013 LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS (IEC 61643-21:2000/A2:2012)
DIN EN 14803:2006-05 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
EN 61076-3-110:2016 Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
EN 61300-2-21:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test
EN 62149-4:2010 Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
EN 60603-7-1:2011 Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
EN 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs
EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters
EN 62149-9:2014 Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers
EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
BS 2011-2.2C&D(1990) : 1990 ENVIRONMENTAL TESTING - TESTS - TESTS C & D - GUIDANCE FOR DAMP HEAT TESTS
BS 2782-5.551A(1988) : 1988 AMD 10820 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST

IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
US$93.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.