IEC 60068-3-1:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-29-2023
English - French, Spanish, Castilian
08-19-2011
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Selection of test procedures
Annex A (informative) - Effect of airflow on chamber
conditions and on surface temperatures of
test specimens
IEC 60068-3-1:2011 provides guidance regarding the performance of cold and dry heat tests. This second edition cancels and replaces the first edition, published in 1974, and constitutes a technical revision. The main changes with regard to the previous edition are as follows:
- removal of guidance regarding thermal characteristics of chamber walls;
- revision of sections that address environmental chambers that do not use movement of air for temperature control.
Committee |
TC 104
|
DevelopmentNote |
Supersedes IEC 60068-3-1A. (08/2011) Stability Date: 2021. (09/2017)
|
DocumentType |
Standard
|
Pages |
25
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
DS EN 60068-3-1 : 2012 | Identical |
NF EN 60068 3-1 : 2012 | Identical |
HD 323.3.1 : 200S1 | Identical |
NEN EN IEC 60068-3-1 : 2011 | Identical |
I.S. EN 60068-3-1:2011 | Identical |
PN EN 60068-3-1 : 2012 | Identical |
SAC GB/T 2424-1 : 2005 | Identical |
VDE 0468-3-1 : 2012-04 | Identical |
DIN EN 60068-3-1 : 2012-04 | Identical |
UNE-EN 60068-3-1:2012 | Identical |
BS EN 60068-3-1:2011 | Identical |
CEI EN 60068-3-1 : 2013 | Identical |
EN 60068-3-1:2011 | Identical |
JIS C 60068-3-1:2016 | Identical |
UTEC 20 401-1 : 1986 | Identical |
SN EN 60068-3-1 : 1999 | Identical |
NEN NPR 10068-3-1 : 1979 | Identical |
BS 2011-3A & B:1977 | Identical |
UNE-EN 60068-2-39:2016 | Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests |
12/30266709 DC : 0 | BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
BS EN 60068-2-1:2007 | Environmental testing Tests. Test A. Cold |
BS EN 60068-1:2014 | Environmental testing General and guidance |
OIML R 139-1 : 2014 | COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
BS EN 60068-3-7:2002 | Environmental testing. Guidance Measurements in temperature chambers for tests A and B (with load) |
BS 2011-2.1Z/AM:1977 | Environmental testing. Tests Test Z/AM. Combined cold/low air pressure tests |
BS ISO 17089-1:2010 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
OIML R 46-1 & 2 : 2012 | ACTIVE ELECTRICAL ENERGY METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
07/30174038 DC : 0 | BS EN 60068-1 - ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE |
BS 2011-2.1Z/BFc:1984 | Environmental testing. Tests Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
CEI EN 60068-3-7 : 2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TEST A AND B (WITH LOAD) |
BS EN 62211:2004 | Inductive components. Reliability management |
OIML R 143 : 2009 | INSTRUMENTS FOR THE CONTINUOUS MEASUREMENT OF SO[2] IN STATIONARY SOURCE EMISSIONS |
OIML R 81 : 1998 | DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS |
OIML R 85-1 & 2 : 2008 | AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROL AND TESTS |
CEI EN 60068-5-2 : 2000 | ENVIRONMENTAL TESTING - PART 5: GUIDE TO DRAFTING OF TEST METHODS TERMS AND DEFINITIONS |
DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
OIML R 134-1 : 2006 | AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
I.S. EN 60068-1:2014 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE |
OIML D 11 : 2013 | GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS |
OIML R 35-1 : 2007 AMD 2014 | MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
NF EN 60068-2-1 : 2007 | ENVIRONMENTAL TESTING - PART 2-1: TESTS - TESTS A: COLD |
CEI EN 60068-3-2 : 2000 | ENVIRONMENTAL TESTING - PART 3: BACKGROUND INFORMATION SECTION 2: COMBINED TEMPERATURE/LOW AIR PRESSURE TESTS |
BS EN 45501:2015 | Metrological aspects of non-automatic weighing instruments |
DIN 19217:1997-11 | MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - CONCEPTS, REQUIREMENTS AND TESTING |
DIN EN 14154-2:2011-06 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
EN 60068-2-50:1999 | Environmental testing - Part 2: Tests - Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
DIN EN ISO 4064-2:2017-10 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
EN 60068-2-40:1999 | Environmental testing - Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests |
EN 60068-2-41:1999 | Environmental testing - Part 2: Tests - Test Z/BM: Combined dry heat/low air pressure tests |
DIN EN 60068-2-41:2000-08 | ENVIRONMENTAL TESTING - PART 2: TESTS; TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS |
CEI 13-32 : 2000 | WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS |
NFE 12 010-1 : 1998 | AUTOMATIC GRAVIMETRIC FILLING MACHINES - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
04/30031093 DC : DRAFT FEB 2004 | ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT |
OIML R 50-1 : 2014 | CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
BS QC 763000(1990) : AMD 6754 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. FILM AND HYBRID FILM INTEGRATED CIRCUITS. GENERIC SPECIFICATION |
BS EN 60068-2-50:2000 | Environmental testing. Test methods Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens |
OIML R 125 : 1998 | MEASURING SYSTEMS FOR THE MASS OF LIQUIDS IN TANKS |
OIML R 144-2 : 2013 | INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 2: METROLOGICAL AND PERFORMANCE TESTS |
UNE-EN ISO 4064-2:2015 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
DIN EN 60068-2-40:2000-08 | ENVIRONMENTAL TESTING - PART 2: TESTS; TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS |
UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
ISO 3930:2000 | Instruments for measuring vehicle exhaust emissions |
I.S. EN 60068-3-7:2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND B (WITH LOAD) |
OIML R 80-2 : 2017 | ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS |
I.S. EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
BS 2011-1.1:1989 | Environmental testing General and guidance |
CEI EN 60068-2-61 : 1997 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS TEST Z/ABDM: CLIMATIC SEQUENCE |
BS EN 60068-2-2:2007 | Environmental testing Tests. Test B. Dry heat |
11/30217192 DC : 0 | BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
OIML R 140 : 2007 | MEASURING SYSTEMS FOR GASEOUS FUEL |
BS EN ISO 4064-2:2017 | Water meters for cold potable water and hot water Test methods |
BS EN 60068-2-41:2000 | Environmental testing. Test methods Tests. Test Z/BM: Combined dry heat/low air pressure tests |
BS 2011-3Z/AM & Z/BM:1977 | Environmental testing. Background information Tests Z/AM & Z/BM. Combined temperature/low air pressure tests |
NF EN 60068 5-2 : 2000 | ENVIRONMENTAL TESTING - PART 5: GUIDE TO DRAFTING OF TEST METHODS - TERMS AND DEFINITIONS |
UNI CEI EN ISO 4064-2 : 2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
11/30254162 DC : 0 | BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
OIML R 129 : 2000 | MULTI-DIMENSIONAL MEASURING INSTRUMENTS |
11/30255443 DC : 0 | BS EN 60068-2-39 - ENVIRONMENTAL TESTING - PART 2-39: TESTS AND GUIDANCE: COMBINED TEMPERATURE OR TEMPERATURE AND HUMIDITY WITH LOW AIR PRESSURE TESTS |
BS EN 60068-2-40:2000 | Environmental testing. Test methods Test Z/AM. Combined cold/low air pressure tests |
BS 2011-5.2:1992 | Environmental testing. Guide to drafting of test methods Terms and definitions |
BS EN 60068-2-51:2000 | Environmental testing. Test methods Tests. Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
I.S. EN 60068-2-2:2007 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
OIML R 139 : 2007 | COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES |
OIML R 49-2 : 2013 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS |
OIML R 35-2 : 2011 | MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 2: TEST METHODS |
NF EN 60068-2-2 : 2007 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TESTS B: DRY HEAT |
CEI EN 60068-2-40 : 2000 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS |
OIML R 126 : 2012 | EVIDENTIAL BREATH ANALYZERS |
ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
I.S. EN 60068-2-41:1999 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
UNE-EN 45501:2016 | Metrological aspects of non-automatic weighing instruments |
BS EN 14154-2 : 2005 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
IEC 60068-3-7:2001 | Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
UNE-EN 14154-2:2005 | Water meters - Part 2 : Installation and conditions of use |
EN 60068-3-7:2002 | Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
UNI EN 14154-2 : 2011 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
CEI EN 60068-2-2 : 2008 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
BS 2011-2.1B:1977 | Environmental testing. Tests Tests B. Dry Heat |
OIML R 99-1 & 2 : 2008 | INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
OIML R 117-1 : 2007 | DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
OIML R 21 : 2007 | TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT |
DIN EN 12405-3 E : 2016 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
BS ISO 17089-1:2019 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
PD 6521:1988 | Summaries of test methods for environmental testing of electrotechnical products |
04/30031075 DC : DRAFT FEB 2004 | ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS |
NF ISO 3930 : 2001 | INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS |
PREN 45501 : DRAFT 2011 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
I.S. EN ISO 4064-2:2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
DIN EN ISO 4064-2:2016-09 (Draft) | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
BS 2011-2.1Z/BM:1977 | Environmental testing. Tests Test Z/BM. Combined dry heat/low air pressure tests |
OIML R 50-2 : 2014 | CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 2: TEST PROCEDURES |
CEI EN 60068-2-1 : 2007 | ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD |
OIML R 136-1 : 2004 | INSTRUMENTS FOR MEASURING THE AREAS OF LEATHERS |
IEC 60300-3-5:2001 | Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles |
IEC 60068-2-61:1991 | Environmental testing - Part 2-61: Test methods - Test Z/ABDM:Climatic sequence |
DIN EN 45501:2016-03 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60068-2-39:2015 | Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests |
ISO 4064-2:2014 | Water meters for cold potable water and hot water Part 2: Test methods |
IEC 61747-1:1998+AMD1:2003 CSV | Liquid crystal and solid-state display devices - Part 1: Generic specification |
EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 14154-2:2005+A2:2011 | Water meters - Part 2: Installation and conditions of use |
EN ISO 4064-2:2017 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
BS 2011-2.1Z/AFc:1984 | Environmental testing. Tests Tests Z/AFc. Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
BS EN 60068-5-2:2000 | Environmental testing. Guide to drafting of test methods Terms and definitions |
BS EN 60068-3-2:1999 | Environmental testing. Guidance Combined temperature/low air pressure tests |
NF EN 60068 2-61 : 1994 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST Z/ABDM: CLIMATIC SEQUENCE |
OIML R 146-1 : 2016 | PROTEIN MEASURING INSTRUMENTS FOR CEREAL GRAIN AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
OIML R 76-1 : 2006 | NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
BS EN 60068-2-39:2016 | Environmental testing Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests |
OIML R 139-2 : 2014 | COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
OIML R 144-1 : 2013 | INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
CEI EN 60068-2-41 : 2000 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS |
I.S. EN 60068-2-39:2016 | ENVIRONMENTAL TESTING - PART 2-39: TESTS - TESTS AND GUIDANCE: COMBINED TEMPERATURE OR TEMPERATURE AND HUMIDITY WITH LOW AIR PRESSURE TESTS |
I.S. EN 60068-2-40:1999 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS |
I.S. EN 60068-2-1:2007 | ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD |
IEC 60068-5-2:1990 | Environmental testing - Part 5-2: Guide to drafting of test methods - Terms and definitions |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
EN 62211:2017 | Inductive components - Reliability management |
NF EN 60068-3-7 : 2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND TEST B (WITH LOAD) |
EN 60068-2-39:2016 | Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests |
EN 12405-3 : 2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
EN 60068-5-2:1999 | Environmental testing - Part 5: Guide to drafting of test methods - Terms and definitions |
EN 60068-2-51:1999 | Environmental testing - Part 2: Tests - Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
EN 45501 : 2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
BS 2011-2.1A(1990) : 1990 AMD 7783 | ENVIRONMENTAL TESTING - TESTS - TEST A: COLD |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.