• There are no items in your cart

IEC 60189-1:2007

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

12-31-2021

Language(s)

English, Spanish, Castilian

Published date

05-23-2007

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Standard conditions for testing
5 Dimensions
  5.1 Selection and preparation of samples
      5.1.1 Insulation
      5.1.2 Sheath
      5.1.3 Finished cable or wire
  5.2 Measurement of dimensions
      5.2.1 Minimum thickness of insulation or sheath
      5.2.2 Mean thickness of insulation or sheath
      5.2.3 Diameter of finished cable or wire
6 Mechanical tests
  6.1 Selection, marking and preparation of samples
      for tensile tests
      6.1.1 Conductors
      6.1.2 Insulation
      6.1.3 Sheath
  6.2 Measurement of cross-sectional area for tensile test
      6.2.1 General
      6.2.2 Insulation
      6.2.3 Sheath
  6.3 Tensile test
      6.3.1 Conditioning of test pieces
      6.3.2 Tensile testing procedure
      6.3.3 Expression of results
  6.4 Stripping properties of insulation
      6.4.1 General
      6.4.2 Test method
7 Thermal stability and climatic tests
  7.1 Accelerated ageing
  7.2 Pressure test at high temperature
  7.3 Resistance to flame propagation
      7.3.1 General
      7.3.2 Wires
      7.3.3 Cables
  7.4 Cold bend test
      7.4.1 General
      7.4.2 Insulation
      7.4.3 Sheath
  7.5 Heat shock test
      7.5.1 General
      7.5.2 Insulation
      7.5.3 Sheath
  7.6 Measurement of insulation shrinkage after overheating
      of conductor
  7.7 Combined shrinkage and heat shock test
  7.8 Solder test on tinned conductors
8 Electrical tests
  8.1 Electrical resistance of conductors
  8.2 Dielectric strength
      8.2.1 General
      8.2.2 Wires
      8.2.3 Cables
  8.3 Insulation resistance
      8.3.1 General
      8.3.2 Wires
      8.3.3 Cables
  8.4 Mutual capacitance
  8.5 Capacitance unbalance (conductor to conductor)

specifies mechanical, electrical and climatic test methods for low-frequency cables and wires designed for use in telecommunication inside plant and equipment and in electronic devices employing similar techniques.

Committee
TC 46/SC 46C
DevelopmentNote
Stability Date: 2020. (09/2017)
DocumentType
Standard
Pages
17
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
UNE 212002-1:2014 Identical
NEN IEC 60189-1 : 2007 Identical
SANS 6282-1 : 2ED 2007(R2013) Identical
SANS 6282-1:2007(R2021) Identical
UNE 20601-1:1981 Identical
CEI 46-4 : 1997 Identical
NEN 10189-1 : 1993 Identical

UNE-EN 60794-2-41:2011 Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres
98/262057 DC : 0 IEC 60092-374 - ELECTRICAL INSTALLATIONS IN SHIPS - SHIPBOARD TELECOMMUNICATIONS CABLES AND RADIO-FREQUENCY CABLES - PART 374: TELEPHONE CABLES FOR NON-ESSENTIAL COMMUNICATION SERVICES
07/30164222 DC : 0 BS EN 60794-2-20 - OPTICAL FIBRE CABLES - PART 2-20: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES
I.S. EN 62012-1:2002 MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENTS - PART 1: GENERIC SPECIFICATION
12/30259054 DC : DRAFT JAN 2012 BS EN 60794-2-20 - OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES
DIN EN 50173:2000-07 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS
CEI EN 60794-2-41 : 2009 OPTICAL FIBRE CABLES - PART 2-41: INDOOR CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX BUFFERED A4 FIBRES
BS EN 187000:1994 Generic specification for optical fibre cables
11/30232676 DC : 0 BS EN 61784-5 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5: INSTALLATION OF FIELDBUSES
I.S. EN 60794-2-40:2008 OPTICAL FIBRE CABLES - PART 2-40: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR A4 FIBRE CABLES
CEI EN 50288-1 : 2014 MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION
CSA ISO/IEC 15018 : 2005 : R2010 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
CSA ISO/IEC 15018:2005 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R201000 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
I.S. EN 60708:2005 LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH
IEC 60189-2:2007 Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations
I.S. EN 61784-5-6:2013 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-6: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 6
BS EN 61730-1 : 2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
OVE/ONORM EN 60794-2-50 : 2009 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
IEC 60794-1-1:2015 Optical fibre cables - Part 1-1: Generic specification - General
EN 60794-1-1:2016 Optical fibre cables - Part 1-1: Generic specification - General
EN 60794-2-20:2014 Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables
EN 60794-2-41 : 2008 OPTICAL FIBRE CABLES - PART 2-41: INDOOR CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX BUFFERED A4 FIBRES
EN 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification
EN 187000 : 92 AMD 1 95 GENERIC SPECIFICATION: OPTICAL FIBRE CABLES
PREN 50288-1 : DRAFT 2011 MULTI-ELEMENT METALLIC CABLES USE IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION
ES 202 319 : 1.1.1 TRANSMISSION AND MULTIPLEXING (TM); PASSIVE OPTICAL COMPONENTS AND CABLES; OPTICAL FIBRE CABLES TO BE USED FOR PATCHCORD APPLICATIONS FOR SINGLE-MODE OPTICAL FIBRE COMMUNICATION SYSTEMS; COMMON REQUIREMENTS AND CONFORMANCE TESTING
BS 7870-8.4:2003 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance - Section 8.4 Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance
BS EN 60794-2-20:2014 Optical fibre cables Indoor cables. Family specification for multi-fibre optical cables
I.S. EN 61730-1:2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
15/30321921 DC : 0 BS EN 62807-1 - HYBRID TELECOMMUNICATION CABLES
99/201485 DC : DRAFT MAR 99 EN 50288 SERIES - MULIT-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION; PART 2-1: SS FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLE: PART 2-2: SS FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - WORK AREA & PATCH CORD CABLES; PART 3-1: SS FOR UNSCREENED CABLES CONT:
I.S. EN 61158-2:2014 INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
00/246334 DC : DRAFT DEC 2000 IEC 61156-6 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 6: SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS WITH TRANSMISSION CHARACTERISTICS UP TO 600 MHZ - WORK AREA WIRING - SECTIONAL SPECIFICATION
CEI EN 60708 : 2006 LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH
CSA C22.2 No. 61730-1 : 2011 : INC : UPD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
CEI 20-59 : 1999 MULTICORE AND MULTIPAIR CABLE FOR INSTALLATION ABOVE AND BELOW GROUND
CEI EN 60794-2-40 : 2009 OPTICAL FIBRE CABLES - PART 2-40: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR A4 FIBRE CABLES
NF EN 60794-1-1 : 2002 OPTICAL FIBER CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
IEC 61784-5-6:2013 Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
IEC 60794-1-1 REDLINE : 4ED 2015 OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
IEC PAS 60794-2-50:2004 Optical fibre cables - Part 2-50: Indoor optical fibre cables - Family specification for simplex and duplex cables for use in patch cords
UNE-EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification
IEC 60794-1:1996 Optical fibre cables - Part1: Generic specification (Revision to IEC 794-1)
09/30205023 DC : 0 BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
UNE-EN 60794-2-40:2011 Optical fibre cables -- Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
04/30126721 DC : DRAFT DEC 2004 IEC 60189-2 ED.4 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 2: CABLES IN PAIRS, TRIPLES, QUADS AND QUINTUPLES FOR INSIDE INSTALLATIONS
BS EN 60794-2-50:2008 Optical fibre cables Indoor cables. Family specification for simplex and duplex cables for use in terminated cable assemblies
UTEC 93 531-10 : 2004 SYMMETRICAL CABLES FOR HIGH FREQUENCY TRANSMISSIONS - DETAIL SPECIFICATION FOR CABLES OF 907 SERIES
BS EN 60708:2005 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
BS EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control Generic specification
BS EN 60794-2-42:2008 Optical fibre cables Indoor optical fibre cables. Product specification for simplex and duplex cables with A4 fibres
02/209111 DC : DRAFT SEP 2002 PREN 50288-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION
14/30310028 DC : 0 BS EN 60794-1-1 - OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
05/30139166 DC : DRAFT SEP 2005 IEC 60794-2-41 - OPTICAL FIBRE CABLES - PART 2-41: INDOOR OPTICAL FIBRE CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX BUFFERED A4 FIBRES
BS EN 61784-5-6:2013 Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 6
BS EN 60794-2-40:2008 Optical fibre cables Indoor optical fibre cables. Family specification for A4 fibre cables
BS 7870-8.6:2003 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors - Section 8.6 Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors
05/30131385 DC : DRAFT MAR 2005 IEC 61156-1 ED 3 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION
PD 6580-2:1995 Home and building electronic systems. Technical report 1 Guidelines for the professional installation of Twisted Pair cables class 1
IEC TR 60092-370:2009 Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
I.S. EN 60794-2-50:2008 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
I.S. EN 60794-1-1:2016 OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
IEC 60189-3:2007 Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples
BIS IS 14493-7 : 2012(R2015) MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 7: SYMMETRICAL PAIR CABLES WITH TRANSMISSION CHARACTERISTICS UP TO 1200 MHZ - SECTIONAL SPECIFICATION FOR DIGITAL AND ANALOG COMMUNICATION CABLES
ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
ISO/IEC 15018:2004 Information technology Generic cabling for homes
IEC 61156-7:2003+AMD1:2012 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmissioncharacteristics up to 1 200 MHz - Sectional specification fordigital and analog communication cables
IEC 62255-1:2003 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification
IEC 60794-2-50:2008 Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies
IEC 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
IEC 60794-2-40:2008 Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables
12/30264905 DC : 0 BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
IEC 60794-1-1:2015 RLV Optical fibre cables - Part 1-1: Generic specification - General
CEI EN 60794-2-42 : 2009 OPTICAL FIBRE CABLES - PART 2-42: INDOOR OPTICAL FIBRE CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES WITH A4 FIBRES
11/30255235 DC : 0 BS EN 50288-1 - MULTI-ELEMENT METALIC CABLES USED IN ANALOUGE AND DIGITAL COMUNICATION AND CONTROL - PART 1: GENEIC SPECIFICATION
NF EN 60794-2-50 : 2009 OPTICAL FIBRE CABLES - PART 2-50: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
04/30126724 DC : DRAFT DEC 2004 IEC 60189-3 ED.4 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 3: EQUIPMENT WIRES WITH SOLID OR STRANDED CONDUCTOR, PVC INSULATED, IN SINGLES, PAIRS AND TRIPLES
CEI EN 60794-2-50 : 2010 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
14/30315980 DC : 0 BS EN 60794-2-22 - OPTICAL FIBRE CABLES - PART 2-22: INDOOR OPTICAL FIBRE CABLES - DETAIL SPECIFICATION FOR MULTI-SIMPLEX BREAKOUT OPTICAL CABLES TO BE TERMINATED WITH CONNECTORS
BS EN 50173:1996 Information technology. Generic cabling systems
CEI EN 62012-1 : 2003 MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENT - PART 1: GENERIC SPECIFICATION
16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
UNE-EN 60794-1-1:2016 Optical fibre cables - Part 1-1: Generic specification - General
DEFSTAN 59-49/3(1987) : 1987 SOLDERLESS WRAPPED ELECTRICAL CONNECTIONS - SPECIFICATION
NFC 93 533 : 94 AMD 1 96 XP ELECTRONIC COMPONENTS - CABLES WITH PVC INSULATION AND PVC SHEATH FOR WIRING AND INDOOR TRANSMISSION EQUIPMENT - GENERIC SPECIFICATION
IEC PAS 61156-5:2001 Symmetrical pair/quad cables for digital communications with transmission characteristics up to 600 MHz - Horizontal floor wiring - Sectional specification
IEC 61156-1:2007+AMD1:2009 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
I.S. EN 60794-2-20:2014 OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES
IEC PAS 61156-6:2001 Symmetrical pair/quad cables for digital communications with transmission characteristics up to 600 MHz - Work area wiring - Sectional specification
DIN EN 61158-2:2015-02 INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (IEC 61158-2:2014)
BS EN 61158-2:2014 Industrial communication networks. Fieldbus specifications Physical layer specification and service definition
IEC 62012-1:2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification
EN 60794-2-50 : 2008 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
IEC 60794-2-20:2013 Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables
IEC 60708:2005 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
IEC 60794-2-42:2008 Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres
IEC 60794-2-41:2008 Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres
BS 7870-8.2:2003 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground Single wire armoured and PVC sheathed multipair cable with copper conductors - Section 8.2 Single wire armoured and PVC sheathed multipair cable with copper conductors
BIS IS/IEC 60794-1-1 : 2001 OPTICAL FIBRE CABLES - PART 1: GENERIC SPECIFICATION - SECTION 1: GENERAL
I.S. EN 50288-1:2013 MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION
03/316192 DC : DRAFT SEP 2003 IEC 60708-1 ED 2 - LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH - PART 1: GENERAL DESIGN DETAILS AND REQUIREMENTS
BS 7630:1993 Generic specification for symmetric pair/quad and multicore cables for digital communication
05/30138945 DC : DRAFT SEP 2005 IEC 60794-2-40 - OPTICAL FIBRE CABLES - PART 2-40: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR A4 FIBRE CABLES
I.S. EN 60794-2-42:2008 OPTICAL FIBRE CABLES - PART 2-42: INDOOR OPTICAL FIBRE CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES WITH A4 FIBRES
02/206899 DC : DRAFT JULY 2002 IEC 60794-2-40 ED.1 - INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX BUFFERED A4 FIBRES
CEI EN 60794-2-20 : 2014 OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES
05/30139161 DC : DRAFT SEP 2005 IEC 60794-2-42 - OPTICAL FIBRE CABLES - PART 2-42: INDOOR OPTICAL FIBRE CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES WITH A4 FIBRES
BS EN 62012-1:2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Generic specification
BS EN 60794-2-41:2008 Optical fibre cables Indoor cables. Product specification for simplex and duplex buffered A4 fibres
IEC 60092-375:1977 Electrical installations in ships. Shipboard telecommunication cables and radio-frequency cables. General instrumentation, control and communication cables
CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R2015 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
I.S. EN 60794-2-41:2008 OPTICAL FIBRE CABLES - PART 2-41: INDOOR CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX BUFFERED A4 FIBRES
CSA C22.2 No. 61730-1 : 2011 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
BS EN 60794-1-1:2016 Optical fibre cables Generic specification. General
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 : R2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
CEI EN 61784-5-6 : 2014 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-6: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 6
EN 60794-2-40:2008 Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables
EN 61784-5-6:2013 Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
EN 61730-1:2007/A11:2014 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED)
EN 62012-1:2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification
EN 60794-2-42:2008 Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres
EN 50173 : 95 AMD 1 2000 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS
EN 60708:2005/AC:2016-08 LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH

IEC 60811-3-1:1985 Common test methods for insulating and sheathing materials ofelectric cables - Part 3: Methods specific to PVC compounds -Section One: Pressure test at high temperature - Tests forresistance to cracking
IEC 60028:1925 International standard of resistance for copper
ISO 6892:1998 Metallic materials Tensile testing at ambient temperature
IEC 60885-1:1987 Electrical test methods for electric cables. Part 1: Electrical tests for cables, cords and wires for voltages up to and including 450/750 V
IEC 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods
IEC 60811-1-1:1993+AMD1:2001 CSV Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
IEC 60811-1-3:1993+AMD1:2001 CSV Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application -Methods for determining the density - Water absorption tests - Shrinkage test
IEC 60811-1-4:1985 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature

View more information
US$133.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.