• There are no items in your cart

IEC 60335-2-40:2013+AMD1:2016 CSV

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditionersand dehumidifiers
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

08-13-2021

Language(s)

English

Published date

04-28-2016

IEC 60335-2-40:2013+A1:2016(E) deals with the safety of electric heat pumps, including sanitary hot water heat pumps, air-conditioners, and dehumidifiers incorporating motor-compressors and hydronic room fan coils, their maximum rated voltages being not more than 250 V for single phase appliances and 600 V for all other appliances. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such asappliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard also applies to electric heat pumps, air conditioners and dehumidifiers containing flammable refrigerant. Flammable refrigerants are defined in 3.121. The appliances referenced above may consist of one or more factory made assemblies. If provided in more than one assembly, the separate assemblies are to be used together, and the requirements are based on the use of matched assemblies. This standard does not take into account chemicals other than group A1, A2, or A3 as defined by ANSI/ASHRAE 34 [ISO 817] classification. This standard specifies particular requirements for the use of flammable refrigerants. Unless specifications are covered by this standard, including the annexes, requirements for refrigerating safety are covered by ISO 5149. It constitutes a technical revision. The principal changes in this edition as compared with the fourth edition are as follows:
- 3.127 and 3.128 added new definitions;
- 5.10 length of refrigerant lines now specified for testing;
- 7.1 changed marking requirements for flammable refrigerants;
- 8.15 added requirement to clarify the placement of installation panels during testing;
- 11.2.1 clarification of test procedure;
- 19 (whole clause) replaced in its entirety;
- 21.2 added new coverage for vibration considerations during transport;
- 22.46 added clarification for PEC;
- 22.118 added coverage for use of mechanical connectors indoors when employing flammable refrigerants;
- 32 made this section of Part 1 applicable;
- Annex FF2.4 revised calculation for calculating volume (V);
- Annex FF2.5 revision of allowable concentration of flammable refrigerant gas;
- Annex GG8 new coverage added;
- Annex HH added informative annex. Key words: heat pumps, air-conditioners, dehumidifiers, flammable refrigerant

This publication is to be read in conjunction with IEC 60335-1:2010. This consolidated version consists of the first edition (2013) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication.

Committee
TC 61/SC 61D
DocumentType
Standard
Pages
155
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

DIN EN 15879-1:2011-05 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps
I.S. EN 16147:2017 HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING, PERFORMANCE RATING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS
15/30328744 DC : 0 BS EN 14511-4 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS FOR SPACE HEATING AND COOLING AND PROCESS CHILLERS, WITH ELECTRICALLY DRIVEN COMPRESSORS - PART 4: REQUIREMENTS
CSA E60335.2.30 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-30: PARTICULAR REQUIREMENTS FOR ROOM HEATERS
I.S. EN 378-2:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
DIN EN 14511-4:2015-12 (Draft) AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: OPERATING REQUIREMENTS, MARKING AND INSTRUCTIONS
EN 378-1:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
I.S. EN 60335-2-30:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-30: PARTICULAR REQUIREMENTS FOR ROOM HEATERS (IEC 60335-2-30:2009 (EQV))
UNI EN 14511-4 : 2013 AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: OPERATING REQUIREMENTS, MARKING AND INSTRUCTIONS
PREN 378-1 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
I.S. EN 378-4:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 4: OPERATION, MAINTENANCE, REPAIR AND RECOVERY
UNE-EN 378-2:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
UNE-EN 60335-2-34:2014 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors
DIN EN 16147:2017-08 Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units (includes Corrigendum :2017)
BS EN 15879-1:2011 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling Direct exchange-to-water heat pumps
13/30279156 DC : 0 BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
13/30291771 DC : DRAFT DEC 2013 BS EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
08/30183867 DC : DRAFT AUG 2008 BS EN 13141-7 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
BS EN 60335-2-34:2013 Household and similar electrical appliances. Safety Particular requirements for motor-compressors
BS EN 60335-2-88:2002 Specification for safety of household and similar electrical appliances. Particular requirements Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
CEI EN 60335-2-34 : 2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-34: PARTICULAR REQUIREMENTS FOR MOTOR-COMPRESSORS
BS EN 14511-4:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Operating requirements, marking and instructions
UNI EN 13141-7 : 2011 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
I.S. EN 60335-2-34:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-34: PARTICULAR REQUIREMENTS FOR MOTOR-COMPRESSORS (IEC 60335-2-34:2012 (EQV))
DIN EN 14511-4:2013-12 AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: OPERATING REQUIREMENTS, MARKING AND INSTRUCTIONS
I.S. EN 13141-7:2010 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
DIN EN 13141-7:2011-01 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
EN 13141-7:2010 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
DIN EN 14511-4 E : 2013 AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: OPERATING REQUIREMENTS, MARKING AND INSTRUCTIONS
13/30291774 DC : 0 BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
15/30324456 DC : 0 BS EN 16147 - HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS
09/30209618 DC : 0 BS ISO 5149-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
BS EN 60335-2-30:2009 Household and similar electrical appliances. Safety Particular requirements for room heaters
EN 378-2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
BS EN 16147:2017 Heat pumps with electrically driven compressors. Testing, performance rating and requirements for marking of domestic hot water units
BS EN 378-4:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Operation, maintenance, repair and recovery
ISO 817:2014 Refrigerants Designation and safety classification
PREN 16147 : DRAFT 2015 HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS
09/30206349 DC : 0 BS EN 14511-4 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: REQUIREMENTS
BS EN 378-1:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Basic requirements, definitions, classification and selection criteria
12/30271401 DC : 0 BS EN 14511-4 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: REQUIREMENTS
10/30218548 DC : 0 BS ISO 817 - REFRIGERANTS - DESIGNATION AND SAFETY CLASSIFICATION
08/30195118 DC : DRAFT DEC 2008 BS EN 60335-2-30 ED5 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-30: PARTICULAR REQUIREMENTS FOR ROOM HEATERS
PREN 378-2 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
UNI EN 15879-1 : 2011 TESTING AND RATING OF DIRECT EXCHANGE GROUND COUPLED HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND/OR COOLING - PART 1: DIRECT EXCHANGE-TO-WATER HEAT PUMPS
I.S. EN 15879-1:2011 TESTING AND RATING OF DIRECT EXCHANGE GROUND COUPLED HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND/OR COOLING - PART 1: DIRECT EXCHANGE-TO-WATER HEAT PUMPS
UNE-EN 14511-4:2014 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Operating requirements, marking and instructions
I.S. EN 60335-2-88:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-88: PARTICULAR REQUIREMENTS FOR HUMIDIFIERS INTENDED FOR USE WITH HEATING, VENTILATION, OR AIR-CONDITIONING SYSTEMS
IEC 60335-2-88:2002 Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
11/30243552 DC : 0 BS EN 60335-2-34 ED 5.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-34: PARTICULAR REQUIREMENTS FOR MOTOR-COMPRESSORS
IEC 60335-2-30:2009+AMD1:2016 CSV Household and similar electrical appliances - Safety -Part 2-30:Particular requirements for room heaters
IEC 60335-2-34:2012+AMD1:2015+AMD2:2016 CSV Household and similar electrical appliances - Safety - Part 2-34:Particular requirements for motor-compressors
BS ISO 817 : 2014 REFRIGERANTS - DESIGNATION AND SAFETY CLASSIFICATION
BS EN 378-2:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
EN 15879-1:2011 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps
EN 378-4:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
DIN EN 16147:2015-08 (Draft) HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING, PERFORMANCE RATING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS
CEI EN 60335-2-88 : 2004 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-88: PARTICULAR REQUIREMENTS FOR HUMIDIFIERS INTENDED FOR USE WITH HEATING, VENTILATION, OR AIR-CONDITIONING SYSTEMS
UNE-EN 15879-1:2011 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps
UNE-EN 16147:2017 Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units. (Consolidated version)
CAN/CSA-C22.2 NO. 60335-2-34:17 Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34)
I.S. EN 378-1:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
EN 16147:2017/AC:2017 HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING, PERFORMANCE RATING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS
ISO 5149-2:2014 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation
BS ISO 5149-2:2014 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
UNE-EN 13141-7:2011 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
BS EN 13141-7:2010 Ventilation for buildings. Performance testing of components/products for residential ventilation Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
EN 60335-2-34:2013 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors
EN 60335-2-88:2002 Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems

View more information
US$563.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.