IEEE 1159-2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
IEEE Recommended Practice for Monitoring Electric Power Quality
10-19-2021
English
06-26-2009
1 Overview
1.1 Scope
1.2 Purpose
2 Normative references
3 Definitions
4 Power quality phenomena
4.1 Introduction
4.2 Electromagnetic compatibility
4.3 General classification of phenomena
4.4 Detailed descriptions of phenomena
5 Monitoring objectives
5.1 Introduction
5.2 Need for monitoring power quality
5.3 Equipment tolerances and effects of disturbances
on equipment
5.4 Equipment types
5.5 Effect on equipment by phenomena type
6 Measurement instruments
6.1 Introduction
6.2 History - four generations
6.3 Reasons to monitor versus type of monitor
6.4 Parameters to be measured
6.5 Monitoring instruments
6.6 Pitfalls/Cautions
6.7 Safety
7 Application techniques
7.1 Safety
7.2 Monitoring location
7.3 Equipment connection
7.4 Monitoring thresholds
8 Interpreting power monitoring results
8.1 Introduction
8.2 Interpreting data summaries
8.3 Critical data extraction
8.4 Interpreting critical events
8.5 Verifying data interpretation
Annex A (informative) Calibration and self-testing
A.1 Introduction
A.2 Calibration issues
Annex B (informative) Glossary
Annex C (informative) Bibliography
Covers the monitoring of electrical characteristics of single-phase and polyphase ac power systems. It includes consistent descriptions of conducted electromagnetic phenomena occurring on power systems.
Committee |
Transmission and Distribution
|
DevelopmentNote |
Supersedes IEEE DRAFT 1159. (04/2001)
|
DocumentType |
Standard
|
Pages |
94
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
EN 61000-4-30:2015/AC:2017-01 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS (IEC 61000-4-30:2015/COR1:2016) |
PD IEC/TR 62510:2008 | Standardising the characteristics of electricity |
UNE-EN 61000-4-30:2015 | Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods |
12/30262567 DC : 0 | BS EN 61000-4-30 ED 3 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
BS EN 61000-4-30:2015 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Power quality measurement methods |
06/30159310 DC : 0 | IEC 61000-4-30 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
IEEE 1668-2014 | IEEE Trial-Use Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V |
I.S. EN 61000-4-30:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
IEEE 1159.3-2003 | IEEE Recommended Practice for the Transfer of Power Quality Data |
NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
UFC 3-550-07 : 2017 | UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS |
UFC 3-520-01 : 2015 | UNIFIED FACILITIES CRITERIA - INTERIOR ELECTRICAL SYSTEMS |
IEEE 1409-2012 | IEEE Guide for Application of Power Electronics for Power Quality Improvement on Distribution Systems Rated 1 kV Through 38 kV |
IEEE DRAFT 1346 : D4.1 FEB 97 | DRAFT RECOMMENDED PRACTICE FOR EVALUATING ELECTRIC POWER SYSTEM COMPATIBILITY WITH ELECTRONIC PROCESS EQUIPMENT |
IEEE 1547.7-2013 | IEEE Guide for Conducting Distribution Impact Studies for Distributed Resource Interconnection |
IEEE 1564-2014 | IEEE Guide for Voltage Sag Indices |
NETA ATS : 2017 | ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
IEC PAS 80005-3:2014 | Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements |
15/30290190 DC : 0 | BS ISO 6858 - AIRCRAFT - GROUND SUPPORT ELECTRICAL SUPPLIES - GENERAL REQUIREMENTS |
CSA C61000-4-30 : 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
IEEE 1547.2 : 2008 | APPLICATION GUIDE FOR IEEE STD 1547[TM], IEEE STANDARD FOR INTERCONNECTING DISTRIBUTED RESOURCES WITH ELECTRIC POWER SYSTEMS |
IEEE C62.72-2007 | IEEE Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits |
IEEE 519-2014 REDLINE | IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems |
PD IEC/PAS 80005-3:2014 | Utility connections in port Low Voltage Shore Connection (LVSC) Systems. General requirements |
IEEE 1250-2011 REDLINE | IEEE Guide for Identifying and Improving Voltage Quality in Power Systems |
IEEE 1377-2012 | IEEE Standard for Utility Industry Metering Communication Protocol Application Layer (End Device Data Tables) |
CSA CEI/IEC 61000.4.30 : 2004 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
IEC 61000-4-30 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
IEC 61000-4-30:2015 RLV | Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods |
CSA C61000-4-30 : 2010 : R2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
IEEE 1585 : 2002 | FUNCTIONAL SPECIFICATION OF MEDIUM VOLTAGE (1-35 KV) ELECTRONIC SERIES DEVICES FOR COMPENSATION OF VOLTAGE FLUCTUATIONS |
IEEE 1623-2004 | IEEE Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation |
IEEE 2030.2-2015 | IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure |
IEC TR 62510:2008 | Standardising the characteristics of electricity |
IEEE 1159.3-2019 REDLINE | IEEE Recommended Practice for Power Quality Data Interchange Format (PQDIF) |
IEEE 519-2014 REDLINE | IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems |
IEEE 1366-2012 | IEEE Guide for Electric Power Distribution Reliability Indices |
IEEE 1159.3-2003 | IEEE Recommended Practice for the Transfer of Power Quality Data |
IEC 61000-4-30 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS |
IEC 61000-4-15 : 2.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-15: TESTING AND MEASUREMENT TECHNIQUES - FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS |
IEEE C62.41-1991 | IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits |
NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
SEMI F47 : 2006(R2012) | SPECIFICATION FOR SEMICONDUCTOR PROCESSING EQUIPMENT VOLTAGE SAG IMMUNITY |
MIL-STD-45662 Revision A:1988 | CALIBRATION SYSTEMS REQUIREMENTS |
IEEE 493 : 2007 | DESIGN OF RELIABLE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
IEEE 1453-2015 REDLINE | IEEE Recommended Practice for the Analysis of Fluctuating Installations on Power Systems |
ANSI C84.1 : 2016 | ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ) |
IEC 61000-4-15:2010 | Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications |
NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
IEC 61000-2-2:2002+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
IEC 61000-4-7:2002+AMD1:2008 CSV | Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION |
IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.