IEEE 1434-2014
Current
The latest, up-to-date edition.
IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery
Hardcopy , PDF
English
12-04-2014
1 Overview
2 Normative references
3 Definitions
4 The nature of PD in machine windings
5 Overview of PD detection methods
6 Electrical pulse and RF radiation sensing systems
7 Electrical pulse and RIV measuring instruments
8 Pulse propagation in windings and calibration issues
9 On-line versus off-line testing
10 Test procedures
11 Interpretation of PD test results
Annex A (informative) - Bibliography
Annex B (normative) - Coupling capacitor type tests
and routine tests
Annex C (informative) - Typical PD pulse-phase patterns
(examples)
Annex D (informative) - Typical time-frequency
classification map
Annex E (informative) - Synchronous three channel
multi-spectral analyzer
Annex F (informative) - Electrical pulse and RF radiation
sensing systems in limited use
Annex G (informative) - Interpretive methods in limited
use
This guide discusses both on-line and off-line partial discharge (PD) measurements on complete windings of any type, as well as measurements on individual form-wound coils and bars.
Committee |
Electric Machinery
|
DevelopmentNote |
Supersedes IEEE DRAFT 1434. (09/2000)
|
DocumentType |
Standard
|
ISBN |
978-0-7381-9352-6
|
Pages |
89
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Current
|
Supersedes |
IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
IEEE 1665 : 2009 | GUIDE FOR THE REWIND OF SYNCHRONOUS GENERATORS, 50 HZ AND 60 HZ, RATED 1 MVA AND ABOVE |
ASTM D 3382 : 2013 : REDLINE | Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques |
(INACTIVE RECORD)IEEE C50.12 : 2005 | SALIENT-POLE 50 HZ AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE |
IEEE 1799-2012 | IEEE Recommended Practice for Quality Control Testing of External Discharges on Stator Coils, Bars, and Windings |
IEEE DRAFT C50.12 : D10 2004 | SALIENT-POLE 50 AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE |
IEEE DRAFT 434 : D10 2006 | FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE |
12/30243450 DC : DRAFT FEB 2012 | BS ISO 20958-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ELECTRICAL SIGNATURE ANALYSIS - PART 1: THREE-PHASE INDUCTION MOTORS |
IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
IEEE C50.13 : 2014 | CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE |
ISO 20958:2013 | Condition monitoring and diagnostics of machine systems — Electrical signature analysis of three-phase induction motors |
IEEE DRAFT 67 : D5 2005 | GUIDE FOR THE OPERATION AND MAINTENANCE OF TURBINE GENERATORS |
IEEE 434-2006 | IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
ASTM D 1868 : 2013 : REDLINE | Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
IEEE 1415 : 2006 | INDUCTION MACHINERY MAINTENANCE TESTING AND FAILURE ANALYSIS |
IEEE 1129-2014 | IEEE Guide for Online Monitoring of Large Synchronous Generators (10 MVA and Above) |
IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
IEC TS 60034-27:2006 | Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
IEC 60034-27-1:2017 | Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation |
CLC/TS 60034-27:2011 | Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
S.R. CLC/TS 60034-27:2011 | ROTATING ELECTRICAL MACHINES - PART 27: OFF-LINE PARTIAL DISCHARGE MEASUREMENTS ON THE STATOR WINDING INSULATION OF ROTATING ELECTRICAL MACHINES |
05/30128254 DC : DRAFT JAN 2005 | IEC 60034-27 - ROTATING ELECTRICAL MACHINES - PART 27: PARTIAL DISCHARGE OFF-LINE MEASUREMENTS ON THE STATOR WINDING INSULATION OF ROTATING MACHINERY |
BS ISO 20958:2013 | Condition monitoring and diagnostics of machine systems. Electrical signature analysis of three-phase induction motors |
DD CLC/TS 60034-27:2011 | Rotating electrical machines Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
IEEE 45.6-2016 | IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing |
IEEE 1310-2012 REDLINE | IEEE Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Rotating Machines |
IEEE 1349-2011 REDLINE | IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations |
IEEE 56-2016 | IEEE Guide for Insulation Maintenance of Electric Machines |
IEEE 115-2019 | IEEE Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis |
IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
IEC TS 60034-27:2006 | Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
NEMA 107:2016 | Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus |
IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
IEC TS 61934:2011 | Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses |
IEEE 510-1983 | IEEE Recommended Practices for Safety in High-Voltage and High-Power Testing |
IEC 60505:2011 | Evaluation and qualification of electrical insulation systems |
IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
ASTM D 2303 : 2013 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
ASTM D 3382 : 2013 : REDLINE | Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques |
IEEE 433-2009 REDLINE | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency |
IEEE C37.20.2-1999 | IEEE Standard for Metal-Clad Switchgear |
IEEE 1799-2012 | IEEE Recommended Practice for Quality Control Testing of External Discharges on Stator Coils, Bars, and Windings |
IEC TS 60034-27-2:2012 | Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
ASTM D 1868 : 2013 : REDLINE | Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
IEEE 286-2000 | IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.