IEEE 299-2006

1 Overview
  1.1 Scope
  1.2 Purpose
  1.3 Application
2 Normative references
3 Definitions
  3.1 General terminology
  3.2 Technical terminology
4 Preliminary procedures
  4.1 Background
  4.2 Test plan
  4.3 Calibration
  4.4 Reference level and dynamic range
  4.5 Preliminary shield check procedures
  4.6 Test/witness personnel
5 Detailed procedures
  5.1 Background
  5.2 Recommended standard measurement frequencies
  5.3 Pass/fail requirements
  5.4 Shielding effectiveness calculation
  5.5 Preparation procedures
  5.6 Low-frequency measurements (9 kHz to 20 MHz)
  5.7 Resonant range measurements (20 MHz to 300 MHz)
  5.8 High-frequency measurements (300 MHz to 18 GHz)
6 Quality assurance technical report
  6.1 Abbreviated test report
  6.2 Full test report
Annex A (informative) Rationale
      A.1 Basis
      A.2 Considerations pertinent to the objectives of 1.2
      A.3 Cavity resonances
      A.4 Measurement locations
      A.5 Measurement equipment
Annex B (informative) Mathematical formulas
      B.1 Specific mathematical formulations
      B.2 Low-range (50 Hz to 20 MHz) shielding effectiveness
      B.3 Resonant range (20 MHz to 300 MHz) shielding effectiveness
      B.4 High-range (300 MHz to 100 GHz) shielding effectiveness
      B.5 Nonlinear (logarithmic) calculations
      B.6 Dynamic range considerations
Annex C (informative) Miscellaneous supporting information
      C.1 Coplanar versus coaxial loops
      C.2 Nonlinearity of high-permeability ferromagnetic enclosures
      C.3 Selecting measurement frequencies
Annex D (informative) Guidelines for the selection of measurement
        techniques
      D.1 Types of enclosures
      D.2 Performance requirements
      D.3 Equipment requirements
      D.4 Regulatory agency conflicts
Annex E (informative) Preliminary measurements and repairs
      E.1 Background
      E.2 Frequencies for preliminary check
      E.3 Preliminary check procedures