IEEE 45.8-2016
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
04-07-2016
1. Overview
2. Normative references
3. Definitions
4. Cable types
5. Cable applications
6. Cable installation
Annex A (informative) - Bibliography
Annex B (informative) - Ancillary topics
The scope of this document is to provide recommendations for selection, application, and installation of electrical power, signal, control, data, and specialty marine cable systems on shipboard.
Committee |
Petroleum and Chemical Industry
|
DocumentType |
Standard
|
ISBN |
978-1-5044-0786-1
|
Pages |
52
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Current
|
IEEE 45.1-2017 | IEEE Recommended Practice for Electrical Installations on Shipboard--Design |
IEEE 45.3-2015 | IEEE Recommended Practice for Shipboard Electrical Installations -- Systems Engineering |
IEEE 45.6-2016 | IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing |
IEEE 1810-2017 | IEEE Guide for the Installation of Fire-Rated Cables Suitable for Hydrocarbon Pool Fires for Critical and Emergency Shutdown Systems in Petroleum and Chemical Industries |
IEEE 1580-2021 REDLINE | IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities |
IEEE 2740-2020 | IEEE Guide for Selection and Installation of Electrical Cables and Cable Systems in Hazardous (Classified) Locations on Oil and Gas Land Drilling Rigs |
IEEE 1202-2006 | IEEE Standard for Flame-Propagation Testing of Wire & Cable |
IEC 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
MIL-DTL-24640 Revision C:2011 | CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
IEC 60287-2-1:2015 RLV | Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance |
IEC 60331-11:1999+AMD1:2009 CSV | Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C |
MIL-STD-2042-6 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (TESTS) (PART 6 OF 7 PARTS) |
MIL-PRF-85045 Revision G:2014 | Cables, Fiber Optic, General Specification for |
MIL-STD-2042-3 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLE PENETRATIONS) (PART 3 OF 7 PARTS) |
MIL-STD-2042-4 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLEWAYS) (PART 4 OF 7 PARTS) |
IEC 61914:2015 | Cable cleats for electrical installations |
IEC 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
IEEE 1717-2012 | IEEE Standard for Testing Circuit Integrity Cables Using a Hydrocarbon Pool Fire Test Protocol |
IEC 60949:1988 | Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects |
DIN 57472-501 : 1983 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS - CONDUCTOR RESISTANCE |
ICEA P 32 382 : 2007(R2018) | SHORT CIRCUIT CHARACTERISTICS OF INSULATED CABLES |
MIL-STD-2042-2 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (EQUIPMENT) (PART 2 OF 7 PARTS) |
IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
IEEE 835-1994 | IEEE Standard Power Cable Ampacity Tables |
UL 1309:3ED 2017-04 | Marine Shipboard Cable |
CSA C22.2 No. 239 : 2017 | CONTROL AND INSTRUMENTATION CABLES |
UL 2196:2ED 2017-08 | Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control and Data Cables |
MIL-STD-2042-5 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CONNECTORS AND INTERCONNECTIONS) (PART 5 OF 7 PARTS) |
IEC 60331-23:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables |
IEC 60754-2:2011 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
EN 50288-7:2005 | Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
MIL-STD-2042-1 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLES) (PART 1 OF 7 PARTS) |
MIL DTL 17 : J | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
MIL-HDBK-299 Base Document:1989 | CABLE COMPARISON HANDBOOK DATA PERTAINING TO ELECTRIC SHIPBOARD CABLE |
IEC 60331-21:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV |
IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
MIL-DTL-915 Revision G:2002 | Cable, Electrical, for Shipboard Use, General Specification for |
IEC 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
UL 13:4ED 2015-03 | Power-Limited Circuit Cables |
UL 2250:3ED 2017-03 | Instrumentation Tray Cable |
IEC 60331-25:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables |
IEC 61914 : 2.0:2015 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
IEEE 515-2011 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications |
DEFSTAN 02-713/3(2012) : 2012 | DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
IEEE 575-2014 | IEEE Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV |
IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
MIL-STD-2042-7 Base Document:2002 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS |
IEC 60287-1-1:2006+AMD1:2014 CSV | Electric cables - Calculation of the current rating - Part 1-1:Current rating equations (100 % load factor) and calculation of losses - General |
IEEE 1185-2010 | IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.