IEEE C57.106-2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
10-15-2021
English
06-06-2007
1 Overview
2 Normative references
3 Definitions
4 Evaluation of mineral insulating oil
5 Mineral oil tests and their significance
6 Handling and storage
7 Mineral oil for load tap changers (LTCs)
8 Health and environmental care procedures for mineral
oil
Annex A (informative) - Bibliography
Annex B (informative) - Examples ASTM D1816 breakdown
voltage vs. %RS for new mineral oil
Pertains to mineral oil used in transformers, load tap changers, voltage regulators, and reactors.
Committee |
Transformers
|
DevelopmentNote |
Supersedes IEEE DRAFT C57.106. (10/2007)
|
DocumentType |
Standard
|
Pages |
34
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
IEEE C57.21 : 2008 | REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR SHUNT REACTORS RATED OVER 500 KVA |
IEEE C57.154-2012 | IEEE Standard for the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures |
IEEE C57.32-2015 | IEEE Standard for Requirements, Terminology, and Test Procedures for Neutral Grounding Devices |
IEEE DRAFT 62 : 200D8 | GUIDE FOR DIAGNOSTIC FIELD TESTING OF ELECTRIC POWER APPARATUS |
NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
UFC 3-550-07 : 2017 | UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS |
I.S. EN 60422:2013 | MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE (IEC 60422:2013 (EQV)) |
IEEE C37.010-1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
IEEE C37.100.1-2007 | IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
IEEE DRAFT C57.93 : D13 2005 | INSTALLATION AND MAINTENANCE OF LIQUID-IMMERSED POWER TRANSFORMERS |
IEEE C57.637-2015 REDLINE | IEEE Guide for the Reclamation of Mineral Insulating Oil and Criteria for Its Use |
ASTM D 1816 : 2012 : REDLINE | Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes |
IEEE 3006.3-2017 | IEEE Recommended Practice for Determining the Impact of Preventative Maintenance on the Reliability of Industrial and Commercial Power Systems |
IEEE C57.15-2009 REDLINE | IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators |
IEEE 1861-2014 | IEEE Guide for On-Site Acceptance Tests of Electrical Equipment and System Commissioning of 1000 kV AC and Above |
10/30215366 DC : 0 | BS EN 60422 - MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE |
IEEE 3007.2 : 2010 | This recommended practice covers the maintenance of industrial and commercial power systems. |
IEEE C57.13.5-2009 | IEEE Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above |
BS IEC 60076-21:2011 | Power transformers Standard requirements, terminology, and test code for step-voltage regulators |
API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
IEC 60076-21:2011 | Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators |
IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
IEEE C57.12.38-2014 | IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers 250 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 V and Below; Low Voltage, 480/240 V and Below |
BS EN 60422:2013 | Mineral insulating oils in electrical equipment. Supervision and maintenance guidance |
IEEE C57.140-2006 | IEEE Guide for Evaluation and reconditioning of Liquid Immersed Power Transformers |
IEEE C57.125-2015 | IEEE Guide for Failure Investigation, Documentation, Analysis, and Reporting for Power Transformers and Shunt Reactors |
IEEE C57.146:2005 | INTERPRETATION OF GASES GENERATED IN SILICONE-IMMERSED TRANSFORMERS |
IEEE 62-1995 | IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors |
IEEE C37.121-2012 | GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS |
API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
IEEE 1147-2005 | IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
UNE-EN 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
IEC 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
IEEE DRAFT C57.12.90 : D5.1 98 | DRAFT STANDARD TEST CODE FOR LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS |
IEEE C57.150-2012 | IEEE Guide for the Transportation of Transformers and Reactors Rated 10 000 kVA or Higher |
IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
IEEE 1653.1-2016 | IEEE Standard for Traction Power Rectifier Transformers for Substation Applications up to 1500 V DC Nominal Output |
IEEE C57.152-2013 | IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors |
IEEE 1277-2010 | IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission |
IEEE C57.93-2007 | IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers |
IEEE C37.121-2012 REDLINE | IEEE Guide for Switchgear - Unit Substation - Requirements |
IEEE C57.129-2007 REDLINE | IEEE Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers |
IEEE 2030.2-2015 | IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure |
ASTM D 877/D877M : 2013 : REDLINE | Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes |
EN 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
IEEE C57.21-2008 | IEEE Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA |
IEEE 62-1995 | IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors |
ASTM D 1816 : 2012 : REDLINE | Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes |
IEEE C57.104-1991 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
ASTM D 2285 : 1999 | Standard Test Method for Interfacial Tension of Electrical Insulating Oils of Petroleum Origin Against Water by the Drop-Weight Method (Withdrawn 2008) |
ASTM D 924 : 2015 : REDLINE | Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids |
IEEE C57.93-2007 | IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers |
CFR 40(PTS100-135) : JUL 2017 | PROTECTION OF ENVIRONMENT |
IEEE 980-1994 | IEEE Guide for Containment and Control of Oil Spills in Substations |
IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
ASTM D 1275 : 2015 | Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids |
ASTM D 1533 : 2012 : REDLINE | Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration |
ASTM D 2440 : 2013 : REDLINE | Standard Test Method for Oxidation Stability of Mineral Insulating Oil |
IEEE C57.139-2010 | IEEE Guide for Dissolved Gas Analysis in Transformer Load Tap Changers |
IEEE C57.104-2008 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
IEEE C37.010-1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
IEEE 637-1985 | IEEE Guide for the Reclamation of Insulating Oil and Criteria for Its Use |
CFR 40(PTS700-789) : JUL 2016 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
IEEE C57.131-1995 | IEEE Standard Requirements for Load Tap Changers |
IEEE C57.121-1998 | IEEE Guide for Acceptance and Maintenance of Less-Flammable Hydrocarbon Fluid in Transformers |
ASTM D 1524 : 2015 : REDLINE | Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field |
ASTM D 5837 : 2015 : REDLINE | Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC) |
ASTM D 4768 : 2011 : REDLINE | Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography |
ASTM D 923 : 2015 : REDLINE | Standard Practices for Sampling Electrical Insulating Liquids |
IEEE 980-2013 | IEEE Guide for Containment and Control of Oil Spills in Substations |
ASTM D 2112 : 2015 : REDLINE | Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel |
ASTM D 27 : 1958 | Specification for Natural Rubber AO Insulation for Wire and Cable, 60C Operation (Withdrawn 1960) |
ASTM D 3300 : 2012 : REDLINE | Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions |
IEEE C57.131-2012 | IEEE Standard Requirements for Tap Changers |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.