ISO 10683:2014

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Add to Watchlist

View superseded by

This Standard has been added successfully to your Watchlist.
Please visit My Watchlist to see all standards that you are watching.

Please log in or create an account to add this standard to your Watchlist.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You have already added this standard to your Watchlist.
Visit My Watchlist to view the full list.

Fasteners Non-electrolytically applied zinc flake coatings

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Withdrawn date: 09-27-2018

Language(s): English, French

Published date: 06-10-2014

Publisher: International Organization for Standardization

Add to Watchlist

Abstract - (Show below) - (Hide below)

ISO 10683:2014 specifies requirements for non-electrolytically applied zinc flake coatings for steel fasteners. It applies to coatings:

with or without hexavalent chromium;
with or without top coat;
with or without lubricant (integral lubricant and/or subsequently added lubricant).

It applies to bolts, screws, studs and nuts with ISO metric thread, to fasteners with non-ISO metric thread, and to non-threaded fasteners such as washers, pins, clips, etc.

ISO 10683:2014 does not specify requirements for such fastener properties as weldability or paintability. It does not apply to mechanically applied zinc coatings.

General Product Information - (Show below) - (Hide below)

Development Note	DRAFT ISO/DIS 10683 is also available for this standard. (04/2016)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Organization for Standardization
Status	Withdrawn
Superseded By	ISO 10683:2018
Supersedes	ISO 10683:2000

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
BS EN ISO 10683:2014	Identical
DIN EN ISO 10683:2016-07 (Draft)	Identical
UNE-EN ISO 10683:2015	Identical
PN EN ISO 10683 : 2014	Identical
NBN EN ISO 10683 : 2014	Identical
NF EN ISO 10683 : 2014	Identical
EN ISO 10683:2014	Identical
GOST R ISO 10683 : 2013	Identical
I.S. EN ISO 10683:2014	Identical
SN EN ISO 10683 : 2014	Identical
UNI EN ISO 10683 : 2014	Identical
NEN EN ISO 10683 : 2014	Identical
NS EN ISO 10683 : 2014	Identical
ONORM EN ISO 10683 : 2014	Identical
SANS 1700-5-18 : 1ED 2003(R2010)	Identical
DIN EN ISO 10683:2001-02	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN ISO 4766:2011-11	Slotted set screws with flat point (ISO 4766:2011)
BS EN ISO 14582:2013	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD
ISO 6149-4:2017	Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
UNE-EN ISO 7380-2:2012	Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
DIN EN ISO 14582 E : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
11/30239640 DC : 0	BS ISO 10509 - HEXAGON FLANGE HEAD TAPPING SCREWS
09/30202626 DC : 0	BS EN ISO 12474 - HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
I.S. EN 4702-02:2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 02: SPRING CLAMP STUD COMBINATION
DIN EN ISO 1479:2011-10	Hexagon head tapping screws (ISO 1479:2011)
16/30337587 DC	BS EN ISO 7042. Prevailing torque (all-metal) hexagon high nuts. Product grades A and B
16/30337622 DC : DRAFT MAR 2016	BS EN ISO 8674 - HEXAGON HIGH NUTS (STYLE 2), WITH FINE PITCH THREAD - PRODUCT GRADES A AND B
16/30337569 DC : 0	BS EN ISO 4034 - HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C
16/30337594 DC : DRAFT APR 2016	BS ISO 7044 - PREVAILING TORQUE (ALL-METAL) HEXAGON HIGH NUTS WITH FLANGE - PRODUCT GRADES A AND B
BS ISO 7041:2012 (published 2012-06)	Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12
DIN EN 14218 E : 2003	HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD
ISO 7720:2012	Prevailing torque type all-metal hexagon nuts, style 2 Property class 9
UNE-EN ISO 12474:2011	Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
BS ISO 15072:2012	Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
I.S. EN ISO 7380-2:2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
BIS IS 2269 : 2006	HEXAGON SOCKET HEAD CAP SCREWS
NF EN ISO 12474 : 2010	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
NF EN ISO 4766 : 2011	SLOTTED SET SCREWS WITH FLAT POINT
I.S. EN ISO 14581:2013	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
BIS IS 1363-3 : 2002	HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 3: HEXAGON NUTS (SIZE RANGE M 5 TO M 64)
NF EN ISO 7053 : 2011	HEXAGON WASHER HEAD TAPPING SCREWS
UNI EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
BIS IS 1364-6 : 2002	HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 6: HEXAGON NUTS, STYLE 2
DIN EN ISO 1483:2011-10	Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
I.S. EN ISO 10642:2004	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004)
EN ISO 4016:2011	Hexagon head bolts - Product grade C (ISO 4016:2011)
EN ISO 4014:2011	Hexagon head bolts - Product grades A and B (ISO 4014:2011)
I.S. EN ISO 3269:2000	FASTENERS - ACCEPTANCE INSPECTION
DIN EN 1670:2007-06	Building hardware - Corrosion resistance - Requirements and test methods
DIN EN ISO 7719:2016-05 (Draft)	PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012)
DIN EN ISO 10512:2016-05 (Draft)	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012)
DIN EN ISO 7040:2016-05 (Draft)	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012)
DIN EN ISO 7045:2011-12	Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
DIN EN ISO 10642:2013-04	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004 + AMD 1:2012)
BS EN ISO 7085:1999	Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
UNE-EN ISO 4033:2013	Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012)
UNE-EN ISO 898-1:2015	Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
BS EN ISO 1479:2011	Hexagon head tapping screws
BS EN ISO 7089:2000	Plain washers. Normal series. Product grade A
ISO 4029:2003	Hexagon socket set screws with cup point
BS EN ISO 4762:2004 (published 2004-03)	Hexagon socket head cap screws
UNE-EN ISO 4014:2011	Hexagon head bolts - Product grades A and B (ISO 4014:2011)
BS EN ISO 7045:2011	Pan head screws with type H or type Z cross recess. Product grade A
BS EN ISO 4029:2003	Hexagon socket set screws with cup point
BS EN ISO 4032:2012	Hexagon regular nuts (style 1). Product grades A and B
BS EN ISO 14585:2011	Hexalobular socket pan head tapping screws
UNE-EN ISO 4032:2013	Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
BS EN ISO 7091:2000	Plain washers. Normal series. Product grade C
BS EN ISO 1482:2011	Slotted countersunk (flat) head tapping screws
BS EN ISO 1481:2011	Slotted pan head tapping screws
BS EN ISO 7719:2012	Prevailing torque type all-metal hexagon regular nuts. Property classes 5, 8 and 10
BS EN 14218:2003	Hexagon nuts with flange. Fine pitch thread
ISO 8673:2012	Hexagon regular nuts (style 1) with metric fine pitch thread Product grades A and B
BS EN ISO 14579:2011	Hexalobular socket head cap screws
ISO 7085:1999	Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
ISO 4016:2011	Hexagon head bolts Product grade C
UNE-EN ISO 10513:2013	Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)
BS EN ISO 7093-2:2000	Plain washers. Large series Product grade C
I.S. EN ISO 4034:2012	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012)
I.S. EN ISO 21269:2004	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
I.S. EN ISO 1482:2011	SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
I.S. EN ISO 2010:2011	SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011)
I.S. EN ISO 4018:2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
I.S. EN ISO 7045:2011	PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011)
I.S. EN ISO 14585:2011	HEXALOBULAR SOCKET PAN HEAD TAPPING SCREWS
I.S. EN ISO 4014:2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
DIN EN ISO 4017:2015-05	Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
DIN EN ISO 4029:2004-05	Hexagon socket set screws with cup point (ISO 4029:2003)
EN ISO 4034:2012/AC:2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013)
NF EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
ONORM EN ISO 7380-2 : 2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR (ISO 7380-2:2011)
ONORM EN ISO 14581 : 2013	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
ONORM EN ISO 7380-1 : 2011	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS (ISO 7380-1:2011)
DIN EN ISO 14581:2014-02	Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
I.S. EN ISO 7053:2011	HEXAGON WASHER HEAD TAPPING SCREWS
12/30259649 DC : 0	BS ISO 1891-2 - FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS
09/30208230 DC : 0	BS ISO 1483 - SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
09/30203245 DC : 0	BS ISO 7380-2 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 2: BUTTON HEAD WITH COLLAR (HEAD SHAPE B)
I.S. EN ISO 16228:2018	FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017)
I.S. EN ISO 7380-1:2011	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
09/30208217 DC : 0	BS ISO 1207 - SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
BS ISO 7720:2012 (published 2012-06)	Prevailing torque type all-metal hexagon nuts, style 2. Property class 9
16/30337618 DC : 0	BS EN ISO 8675 - HEXAGON THIN NUTS (STYLE 0) CHAMFERED, WITH FINE PITCH THREAD - PRODUCT GRADES A AND B
16/30337626 DC : 0	BS EN ISO 8673 - HEXAGON REGULAR NUTS (STYLE 1), WITH FINE PITCH THREAD - PRODUCT GRADES A AND B
BS ISO 6149-4 : 2006	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
09/30208248 DC : 0	BS ISO 7053 - HEXAGON WASHER HEAD TAPPING SCREWS
PREN ISO 1482 : DRAFT 2009	SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
09/30208224 DC : 0	BS ISO 1481 - SLOTTED PAN HEAD TAPPING SCREWS
DIN EN ISO 7051:2011-11	Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)
DIN EN ISO 1481:2011-10	Slotted pan head tapping screws (ISO 1481:2011)
09/30208239 DC : 0	BS ISO 7049 - CROSS RECESSED PAN HEAD TAPPING SCREWS
MS 16842 : H	CLAMP, WIRE ROPE, SADDLED, SINGLE-GRIP, STEEL, TYPE 1 (MALLEABLE-IRON AND STEEL SADDLE)
DIN EN ISO 7380-2:2011-11	Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
UNI EN ISO 14582 : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD
NF EN ISO 7380-2 : 2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
ISO 7053:2011	Hexagon washer head tapping screws
BS EN ISO 7380-2:2011	Button head screws Hexagon socket button head screws with collar
I.S. EN ISO 12474:2010	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
ISO 7091:2000	Plain washers Normal series Product grade C
PREN ISO 1207 : DRAFT 2009	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
ISO 15071:2011	Hexagon bolts with flange Small series Product grade A
UNE-EN ISO 6149-4:2017	Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
ISO 8992:2005	Fasteners — General requirements for bolts, screws, studs and nuts
ISO 7043:2012	Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B
UNI EN ISO 7048 : 2011	CROSS-RECESSED CHEESE HEAD SCREWS
EN ISO 6149-4:2017	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
DIN EN ISO 8675:2016-05 (Draft)	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
DIN EN ISO 898-1:2013-05	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
DIN EN ISO 8765:2011-06	Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
DIN EN ISO 8676:2011-07	Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
DIN EN ISO 14586:2011-05	Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
DIN EN ISO 14587:2011-05	Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
DIN EN ISO 8673:2016-05 (Draft)	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
UNE-EN ISO 7050:2011	Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011)
UNE-EN ISO 14586:2011	Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
UNE-EN ISO 1207:2011	Slotted cheese head screws - Product grade A (ISO 1207:2011)
UNE-EN ISO 1481:2011	Slotted pan head tapping screws (ISO 1481:2011)
BS EN ISO 4027:2003	Hexagon socket set screws with cone point
ISO 7092:2000	Plain washers Small series Product grade A
UNE-EN ISO 4018:2011	Hexagon head screws - Product grade C (ISO 4018:2011)
UNE-EN ISO 14584:2011	Hexalobular socket raised countersunk head screws (ISO 14584:2011)
UNE-EN ISO 10512:2013	Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012)
BS EN ISO 7051:2011	Cross-recessed raised countersunk (oval) head tapping screws
BS EN ISO 4033:2012	Hexagon high nuts (style 2). Product grades A and B
ONORM EN ISO 10642 : 2013	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004+AMD 1:2012)
UNE-EN ISO 8673:2013	Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012)
ISO 10642:2004	Hexagon socket countersunk head screws
ISO 7049:2011	Cross-recessed pan head tapping screws
UNE-EN ISO 2010:2012	Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
BS EN ISO 7047:2011	Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A
BS EN ISO 4036:2012	Hexagon thin nuts unchamfered (style 0). Product grade B
I.S. EN ISO 4762:2004	HEXAGON SOCKET HEAD CAP SCREWS
I.S. EN ISO 4032:2012	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012)
I.S. EN ISO 7719:2012	PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012)
I.S. EN ISO 14583:2011	HEXALOBULAR SOCKET PAN HEAD SCREWS
I.S. EN ISO 7049:2011	CROSS-RECESSED PAN HEAD TAPPING SCREWS
I.S. EN ISO 1483:2011	SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
I.S. EN ISO 7085:2000	MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS
DIN EN ISO 7046-2:2011-12	Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
DIN EN ISO 7380:2004-05	HEXAGON SOCKET BUTTON HEAD SCREWS
I.S. EN ISO 8673:2012	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
I.S. EN ISO 7042:2012	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012)
I.S. EN ISO 4036:2012	HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012)
I.S. EN ISO 8676:2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
I.S. EN ISO 10512:2012	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012)
I.S. EN ISO 8675:2012	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
I.S. EN ISO 4033:2012	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012)
I.S. EN ISO 14587:2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
I.S. EN ISO 7047:2011	RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011)
I.S. EN ISO 7046-2:2011	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011)
I.S. EN ISO 4016:2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
I.S. EN ISO 14580:2011	HEXALOBULAR SOCKET CHEESE HEAD SCREWS
I.S. EN ISO 10513:2012	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012)
I.S. EN ISO 7051:2011	CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
I.S. EN ISO 14579:2011	HEXALOBULAR SOCKET HEAD CAP SCREWS
I.S. EN ISO 898-1:2013	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
I.S. EN ISO 4017:2014	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
I.S. EN ISO 1580:2011	SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011)
I.S. EN ISO 10511:2012	PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012)
I.S. EN ISO 8765:2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
I.S. EN ISO 7040:2012	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012)
I.S. EN ISO 8674:2012	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
I.S. EN ISO 14584:2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
I.S. EN ISO 1479:2011	HEXAGON HEAD TAPPING SCREWS
I.S. EN 1670:2007	BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 7048:2011	CROSS-RECESSED CHEESE HEAD SCREWS
I.S. EN ISO 1207:2011	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
I.S. EN ISO 7050:2011	CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
I.S. EN ISO 1481:2011	SLOTTED PAN HEAD TAPPING SCREWS
I.S. EN ISO 2009:2011	SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011)
I.S. EN ISO 14586:2011	HEXALOBULAR SOCKET COUNTERSUNK HEAD TAPPING SCREWS
I.S. EN 13858:2006	CORROSION PROTECTION OF METALS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS ON IRON OR STEEL COMPONENTS
I.S. EN ISO 4035:2012	HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012)
ONORM EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
NF EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
ONORM EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
ONORM EN ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
NF EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
ONORM EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
ONORM EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
ISO 7041:2012	Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12
PD ISO/TS 11672:2016	Connectors for fluid power and general use. Designation and nomenclature
FF C 450 : G	CLAMPS, WIRE ROPE
DIN EN ISO 14581 E : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
BS ISO 4162:2012	Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B
09/30208236 DC : 0	BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT
BS EN ISO 12474:2010	Hexagon socket head cap screws with metric fine pitch thread
16/30337591 DC : DRAFT APR 2016	BS ISO 7043 - PREVAILING TORQUE HEXAGON HIGH NUTS WITH FLANGE (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B
16/30337584 DC : 0	BS ISO 7041 - PREVAILING TORQUE HEXAGON HIGH NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B
BS ISO 9974-4:2006	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
UNI EN ISO 4766 : 2012	SLOTTED SET SCREWS WITH FLAT POINT
15/30280562 DC : 0	BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS
DIN ISO 8992:2005-09	Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
MS 51868 : E	CLAMP, WIRE ROPE, DOUBLE SADDLED, DOUBLE-GRIP, STEEL, TYPE 3
PREN ISO 4766 : DRAFT 2009	SLOTTED SET SCREWS WITH FLAT POINT
BS EN 4702-04:2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 04: SPRING CLAMP
16/30337580 DC : 0	BS EN ISO 7040 - PREVAILING TORQUE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B
09/30208242 DC : 0	BS ISO 7050 - CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
BS EN ISO 7053:2011	HEXAGON WASHER HEAD TAPPING SCREWS
FF C 450/1 : B	CLAMP, WIRE ROPE, DOUBLE-GRIP, STEEL, DOUBLE SADDLED, TYPE 2
ISO 12126:2012	Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B
SAE J 2656 : 2016	Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned
ISO 10509:2012	Hexagon flange head tapping screws
ISO 4162:2012	Hexagon bolts with flange Small series Product grade A with driving feature of product grade B
ISO 9974-4:2016	Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
ISO 7044:2012	Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B
BIS IS 1363-1 : 2002	HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64)
UNE-EN ISO 4766:2012	Slotted set screws with flat point (ISO 4766:2011)
ISO 12125:2012	Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B
UNI EN ISO 7053 : 2012	HEXAGON WASHER HEAD TAPPING SCREWS
UNI EN ISO 7380-2 : 2012	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
EN 4702-04 : 2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 04: SPRING CLAMP
UNI EN ISO 12474 : 2010	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
ISO 4762:2004	Hexagon socket head cap screws
ISO 15072:2012	Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
EN ISO 16228:2018	Fasteners - Types of inspection documents (ISO 16228:2017)
ISO 7380:2004	Hexagon socket button head screws
ISO 10663:2012	Hexagon nuts with flange, style 2 — Fine pitch thread
I.S. EN ISO 7091:2000	PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C
EN ISO 4017:2014	Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
DIN EN ISO 7042:2016-05 (Draft)	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012)
DIN EN ISO 7047:2011-12	Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
DIN EN ISO 7048:2011-07	Cross-recessed cheese head screws (ISO 7048:2011)
UNE-EN ISO 4017:2015	Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
DIN EN ISO 8673 E : 2013	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
DIN EN ISO 8765 E : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 7093-1:2000-11	PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A
DIN EN ISO 4762:2004-06	Hexagon socket head cap screws (ISO 4762:2004)
DIN EN ISO 8674 E : 2013	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
DIN EN ISO 14585:2011-05	Hexalobular socket pan head tapping screws (ISO 14585:2011)
DIN EN ISO 1580:2011-12	Slotted pan head screws - Product grade A (ISO 1580:2011)
UNE-EN ISO 4036:2013	Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012)
DIN EN ISO 4034:2016-05 (Draft)	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012)
DIN EN ISO 8674:2016-05 (Draft)	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
BS EN ISO 8673:2012	Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B
ISO 4028:2003	Hexagon socket set screws with dog point
ISO 4017:2014	Fasteners Hexagon head screws Product grades A and B
BS EN ISO 4028:2003	Hexagon socket set screws with dog point
BS EN ISO 7042:2012	Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12
BS EN ISO 21269:2004	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
UNE-EN ISO 1580:2012	Slotted pan head screws - Product grade A (ISO 1580:2011)
UNE-EN ISO 1483:2011	Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
BS EN ISO 1483:2011	Slotted raised countersunk (oval) head tapping screws
UNE-EN ISO 7048:2011	Cross-recessed cheese head screws (ISO 7048:2011)
UNE-EN ISO 4034:2013	Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012)
BS EN ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
BS EN ISO 10513:2012	Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12
BS EN ISO 7092:2000	Plain washers. Small series. Product grade A
UNE-EN ISO 8674:2013	Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012)
ISO 7048:2011	Cross-recessed cheese head screws
BS EN ISO 4018:2011	Hexagon head screws. Product grade C
ISO 14585:2011	Hexalobular socket pan head tapping screws
UNE-EN ISO 1482:2011	Slotted countersunk (flat) head tapping screws (ISO 1482:2011)
ISO 7090:2000	Plain washers, chamfered Normal series Product grade A
EN ISO 7049:2011	Cross-recessed pan head tapping screws (ISO 7049:2011)
EN ISO 7048:2011	Cross-recessed cheese head screws (ISO 7048:2011)
EN ISO 7085 : 1999	MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS
EN ISO 3269:2000	FASTENERS - ACCEPTANCE INSPECTION
EN ISO 14586:2011	Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
EN ISO 10513:2012	Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)
UNI EN ISO 4036 : 2013	HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B
UNI EN ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN ISO 7042 : 2013	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12
UNI EN ISO 14579 : 2011	HEXALOBULAR SOCKET HEAD CAP SCREWS
UNI EN ISO 7051 : 2012	CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
UNI EN ISO 1483 : 2012	SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
UNI EN ISO 1482 : 2012	SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
UNI EN ISO 4033 : 2013	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B
UNI EN ISO 2009 : 2012	SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
UNI EN ISO 4017 : 2014	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B
UNI EN ISO 4034 : 2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C
I.S. EN ISO 7094:2000	PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C
UNI EN ISO 4035 : 2013	HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B
UNI EN ISO 10512 : 2013	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10
UNI EN ISO 7040 : 2013	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10
UNI EN ISO 1481 : 2012	SLOTTED PAN HEAD TAPPING SCREWS
UNI EN ISO 1479 : 2012	HEXAGON HEAD TAPPING SCREWS
UNI EN ISO 7719 : 2013	PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10
UNI EN ISO 7050 : 2012	CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
UNI EN ISO 10513 : 2013	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12
UNI EN ISO 8673 : 2013	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN ISO 10644 : 2009	SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV
UNI EN ISO 14580 : 2011	HEXALOBULAR SOCKET CHEESE HEAD SCREWS
UNI EN ISO 898-1 : 2013	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
EN ISO 14583:2011	Hexalobular socket pan head screws (ISO 14583:2011)
UNI EN ISO 1207 : 2012	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
UNI EN 14219 : 2006	HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES
UNI EN ISO 1580 : 2012	SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 7045 : 2012	PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
UNI EN ISO 4032 : 2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B
UNI EN ISO 2010 : 2012	SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 14583 : 2011	HEXALOBULAR SOCKET PAN HEAD SCREWS
UNI EN ISO 14587 : 2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
UNI EN ISO 8674 : 2013	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN ISO 7047 : 2012	RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
UNI EN ISO 7046-2 : 2012	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS
UNI EN ISO 14585 : 2011	HEXALOBULAR SOCKET PAN HEAD TAPPING SCREWS
UNI EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
UNI EN ISO 7049 : 2012	CROSS-RECESSED PAN HEAD TAPPING SCREWS
UNI EN ISO 10511 : 2013	PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT)
UNI EN ISO 8675 : 2013	Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B
UNI EN ISO 14586 : 2011	HEXALOBULAR SOCKET COUNTERSUNK HEAD TAPPING SCREWS
UNI EN 1670 : 2007	BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
UNI EN ISO 14584 : 2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
UNI EN ISO 10642 : 2013	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS
UNI EN ISO 1891-2 : 2015	FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS
UNI EN ISO 7380-1 : 2012	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
DIN EN ISO 7380-1:2011-11	Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
DIN EN ISO 7050:2011-11	Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011)
BS EN 4702-02:2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 02: SPRING CLAMP STUD COMBINATION
ISO 16228:2017	Fasteners — Types of inspection documents
09/30203242 DC : 0	BS ISO 7380-1 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 1: BUTTON HEAD (HEAD SHAPE A)
IS 1367 : Part 1 : 2014	TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS
PREN ISO 1481 : DRAFT 2009	SLOTTED PAN HEAD TAPPING SCREWS
16/30337630 DC	BS EN ISO 7719. Prevailing torque (all-metal) hexagon regular nuts. Product grades A and B
UNE-EN ISO 1891-2:2015	Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014)
UNI EN ISO 14581 : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS
DIN EN ISO 1482:2011-10	Slotted countersunk (flat) head tapping screws (ISO 1482:2011)
15/30280509 DC : 0	BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY
07/30161494 DC : 0	BS EN ISO 10644 - SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV
BS EN ISO 1891-2:2014	Fasteners. Terminology Vocabulary and definitions for coatings
DIN 440:2001-03	WASHERS - WITH SQUARE HOLE, ESPECIALLY FOR TIMBER CONSTRUCTIONS
ONORM EN ISO 7053 : 2011	HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011)
BS ISO 10663:2012	Hexagon nuts with flange, style 2. Fine pitch thread
PREN ISO 7050 : DRAFT 2009	CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
BS EN ISO 7380-1:2011	Button head screws Hexagon socket button head screws
EN ISO 1891-2:2014	Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014)
DIN EN ISO 7049:2011-11	Cross-recessed pan head tapping screws (ISO 7049:2011)
IS 1367 : Part 3 : 2017	TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS
SAE J 2295 : 2016	FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED)
SAE J 2655 : 2015	FASTENER PART STANDARD - WASHERS AND LOCKWASHERS (INCH DIMENSIONED)
BS EN ISO 16228:2018	Fasteners. Types of inspection documents
ISO 4161:2012	Hexagon nuts with flange, style 2 — Coarse thread
EN 4702-02 : 2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 02: SPRING CLAMP STUD COMBINATION
I.S. EN 4702-04:2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 04: SPRING CLAMP
PREN ISO 7051 : DRAFT 2009	CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
I.S. EN ISO 6149-4:2017	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
DIN EN ISO 12474:2011-01	Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
PREN ISO 7049 : DRAFT 2009	CROSS RECESSED PAN HEAD TAPPING SCREWS
UNE-EN ISO 14581:2016	Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
DIN EN ISO 4032:2016-05 (Draft)	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012)
DIN EN ISO 2010:2011-12	Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
DIN EN ISO 7093-2:2000-11	PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C
DIN EN ISO 14584:2011-06	Hexalobular socket raised countersunk head screws (ISO 14584:2011)
DIN EN ISO 8676 E : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 8675 E : 2013	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
DIN EN ISO 2009:2011-12	Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
BS EN ISO 10642 : 2004	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS
BS EN ISO 2342:2003 (published 2004-01)	Slotted headless screws with shank
ISO 1483:2011	Slotted raised countersunk (oval) head tapping screws
BS EN ISO 10512:2012	Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10
UNE-EN ISO 14579:2011	Hexalobular socket head cap screws (ISO 14579:2011)
UNE-EN ISO 7049:2011	Cross-recessed pan head tapping screws (ISO 7049:2011)
BS EN ISO 10511:2012	Prevailing torque type hexagon thin nuts (with non-metallic insert)
BS EN ISO 10644:2009	Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV
BS EN ISO 4014:2011	Hexagon head bolts. Product grades A and B
BS EN ISO 3269:2001	FASTENERS - ACCEPTANCE INSPECTION
ISO 7045:2011	Pan head screws with type H or type Z cross recess Product grade A
UNE-EN ISO 4035:2013	Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
ISO 7042:2012	Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12
UNE-EN ISO 7047:2012	Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
BS EN 13858:2006	Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components
ISO 3269:2000	Fasteners Acceptance inspection
ISO 4035:2012	Hexagon thin nuts chamfered (style 0) Product grades A and B
ISO 14579:2011	Hexalobular socket head cap screws
ISO 4033:2012	Hexagon high nuts (style 2) Product grades A and B
BS EN ISO 7090:2000	Plain washers, chamfered. Normal series. Product grade A
BS EN ISO 4035:2012	Hexagon thin nuts chamfered (style 0). Product grades A and B
BS EN ISO 14584:2011	Hexalobular socket raised countersunk head screws
ISO 14582:2013	Fasteners — Hexalobular socket countersunk head screws, high head
BS EN ISO 7046-2:2011	Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
BS EN 14219:2003	Hexagon bolts with flange with metric fine pitch thread. Small series
BS EN ISO 8676:2011	Hexagon head screws with metric fine pitch thread. Product grades A and B
BS EN ISO 7050:2011	Cross-recessed countersunk (flat) head tapping screws
BS EN ISO 14586:2011	Hexalobular socket countersunk head tapping screws
BS EN ISO 1207:2011	Slotted cheese head screws. Product grade A
BS EN ISO 4016:2011	Hexagon head bolts. Product grade C
ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
ISO 4034:2012	Hexagon regular nuts (style 1) Product grade C
ISO 7093-2:2000	Plain washers Large series Part 2: Product grade C
ISO 14586:2011	Hexalobular socket countersunk head tapping screws
UNE-EN ISO 7046-2:2012	Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
UNE-EN ISO 8675:2013	Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012)
BS EN ISO 7380:2004	HEXAGON SOCKET BUTTON HEAD SCREWS
ISO 14587:2011	Hexalobular socket raised countersunk (oval) head tapping screws
BS EN ISO 8674:2012	Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B
ISO 12474:2010	Hexagon socket head cap screws with metric fine pitch thread
UNE-EN ISO 14580:2011	Hexalobular socket cheese head screws (ISO 14580:2011)
BS EN ISO 7048:2011	Cross-recessed cheese head screws
ISO 7051:2011	Cross-recessed raised countersunk (oval) head tapping screws
UNE-EN ISO 10644:2010	Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
UNE-EN ISO 7051:2011	Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)
UNE-EN ISO 14585:2011	Hexalobular socket pan head tapping screws (ISO 14585:2011)
ISO 8676:2011	Hexagon head screws with metric fine pitch thread Product grades A and B
ISO 7380-1:2011	Button head screws — Part 1: Hexagon socket button head screws
ISO 2342:2003	Slotted headless screws with shank
ISO 2009:2011	Slotted countersunk flat head screws Product grade A
BS EN ISO 14587:2011	Hexalobular socket raised countersunk (oval) head tapping screws
ISO 7093-1:2000	Plain washers Large series Part 1: Product grade A
ISO 4014:2011	Hexagon head bolts Product grades A and B
ISO 7380-2:2011	Button head screws — Part 2: Hexagon socket button head screws with collar
ISO 14581:2013	Fasteners — Hexalobular socket countersunk flat head screws
ISO 4766:2011	Slotted set screws with flat point
ISO 1482:2011	Slotted countersunk (flat) head tapping screws
ISO 4032:2012	Hexagon regular nuts (style 1) Product grades A and B
ISO 7719:2012	Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10
ISO 4036:2012	Hexagon thin nuts unchamfered (style 0) Product grade B
BS EN ISO 7049:2011	Cross-recessed pan head tapping screws
UNE-EN ISO 8765:2011	Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
ISO 21269:2004	Hexagon socket head cap screws with metric fine pitch thread
ISO 10511:2012	Prevailing torque type hexagon thin nuts (with non-metallic insert)
ISO 7046-2:2011	Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
ISO 7050:2011	Cross-recessed countersunk (flat) head tapping screws
ISO 1207:2011	Slotted cheese head screws Product grade A
BS EN ISO 1580:2011	Slotted pan head screws. Product grade A
ISO 14580:2011	Hexalobular socket cheese head screws
BS EN ISO 4017:2014	Fasteners. Hexagon head screws. Product grades A and B
ISO 10513:2012	Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12
ISO 8674:2012	Hexagon high nuts (style 2) with metric fine pitch thread Product grades A and B
ISO 1580:2011	Slotted pan head screws Product grade A
ISO 14583:2011	Hexalobular socket pan head screws
BS EN 1670:2007	Building hardware. Corrosion resistance. Requirements and test methods
ISO 10644:2009	Screw and washer assemblies made of steel with plain washers Washer hardness classes 200 HV and 300 HV
BS EN ISO 14583:2011	Hexalobular socket pan head screws
ISO 7040:2012	Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10
ISO 1891-2:2014	Fasteners Terminology Part 2: Vocabulary and definitions for coatings
ISO 8675:2012	Hexagon thin nuts chamfered (style 0) with metric fine pitch thread Product grades A and B
ISO 7089:2000	Plain washers Normal series Product grade A
ISO 4026:2003	Hexagon socket set screws with flat point
ISO 1479:2011	Hexagon head tapping screws
UNE-EN ISO 1479:2011	Hexagon head tapping screws (ISO 1479:2011)
UNE-EN ISO 7719:2013	Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012)
UNE-EN ISO 8676:2011	Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
ISO 4018:2011	Hexagon head screws Product grade C
ISO 10512:2012	Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10
ISO 8765:2011	Hexagon head bolts with metric fine pitch thread Product grades A and B
ISO 7047:2011	Raised countersunk head screws (common head style) with type H or type Z cross recess Product grade A
BS EN ISO 14580:2011	Hexalobular socket cheese head screws
ISO 4027:2003	Hexagon socket set screws with cone point
BS EN ISO 8765:2011	Hexagon head bolts with metric fine pitch thread. Product grades A and B
DIN EN ISO 4026:2004-05	Hexagon socket set screws with flat point (ISO 4026:2003)
DIN EN ISO 14579:2011-06	Hexalobular socket head cap screws (ISO 14579:2011)
DIN EN ISO 4028:2004-05	Hexagon socket set screws with dog point (ISO 4028:2003)
EN ISO 7040:2012	Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)
EN 1670:2007/AC:2008	BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
EN ISO 7089 : 2000	PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A
EN ISO 14584:2011	Hexalobular socket raised countersunk head screws (ISO 14584:2011)
EN ISO 7045:2011	Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
EN ISO 7093-2 : 2000	PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C
EN ISO 7042:2012	Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)
EN ISO 7091 : 2000	PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C
EN ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN ISO 1207:2011	Slotted cheese head screws - Product grade A (ISO 1207:2011)
EN 13858:2006	Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components
EN ISO 4035:2012	Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
EN ISO 14580:2011	Hexalobular socket cheese head screws (ISO 14580:2011)
EN ISO 7380:2004	Hexagon socket button head screws (ISO 7380:2004)
EN ISO 1482:2011	Slotted countersunk (flat) head tapping screws (ISO 1482:2011)
EN ISO 1580:2011	Slotted pan head screws - Product grade A (ISO 1580:2011)
EN ISO 14582:2013	Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)
EN ISO 10642:2004/A1:2012	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004/AMD 1:2012)
EN ISO 4762:2004	Hexagon socket head cap screws (ISO 4762:2004)
EN ISO 7094:2000/AC:2002	PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C
EN ISO 7719:2012	Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012)
EN ISO 4018:2011	Hexagon head screws - Product grade C (ISO 4018:2011)
EN ISO 8676:2011	Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
EN ISO 10512:2012	Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012)
EN ISO 8765:2011	Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
EN ISO 10644:2009	Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
EN ISO 14579:2011	Hexalobular socket head cap screws (ISO 14579:2011)
EN ISO 4032:2012	Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
EN ISO 4766:2011	Slotted set screws with flat point (ISO 4766:2011)
EN ISO 4033:2012	Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012)
EN ISO 8673:2012	Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012)
EN ISO 7090 : 2000	PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A (ISO 7090:2000)
EN ISO 7046-2:2011	Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
EN ISO 7092 : 2000	PLAIN WASHERS - SMALL SERIES - PRODUCT GRADE A
EN ISO 7047:2011	Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
EN ISO 7093-1 : 2000	PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A (ISO 7093-1:2000)
EN ISO 7380-1:2011	Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
EN 14218:2003	Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified)
EN ISO 2010:2011	Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
EN ISO 14581:2013	Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
EN ISO 1483:2011	Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
EN ISO 7380-2:2011	Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
EN ISO 4027:2003	Hexagon socket set screws with cone point (ISO 4027:2003)
EN ISO 1479:2011	Hexagon head tapping screws (ISO 1479:2011)
EN ISO 7051:2011	Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)
EN ISO 4026 : 2003	HEXAGON SOCKET SET SCREWS WITH FLAT POINT
EN 14219:2003/AC:2007	HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES (ISO 15072:1999, modified)
EN ISO 2342:2003	Slotted headless screws with shank (ISO 2342:2003)
EN ISO 1481:2011	Slotted pan head tapping screws (ISO 1481:2011)
EN ISO 14585:2011	Hexalobular socket pan head tapping screws (ISO 14585:2011)
EN ISO 12474:2010	Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
EN ISO 8674:2012	Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012)
EN ISO 4028 : 2003	Hexagon socket set screws with dog point (ISO 4028:2003)
EN ISO 10511:2012	Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)
EN ISO 14587:2011	Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
EN ISO 21269:2004	Hexagon socket head cap screws with metric fine pitch thread (ISO 21269:2004)
EN ISO 7053:2011	Hexagon washer head tapping screws (ISO 7053:2011)
EN ISO 2009:2011	Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
EN ISO 8675:2012	Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012)
EN ISO 4036:2012	Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012)
EN ISO 7050:2011	Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011)
DIN EN ISO 14582:2014-02	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
BS EN ISO 4766:2011	SLOTTED SET SCREWS WITH FLAT POINT
I.S. EN ISO 7380:2004	HEXAGON SOCKET BUTTON HEAD SCREWS
BS ISO 10509:2012	Hexagon flange head tapping screws
14/30280974 DC : 0	BS EN ISO 4759-3 - TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F
UNE-EN ISO 7380-1:2012	Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
16/30337573 DC : DRAFT APR 2016	BS EN ISO 4035 - HEXAGON THIN NUTS (STYLE 0), CHAMFERED - PRODUCT GRADES A AND B
BS EN ISO 14581:2013	Fasteners. Hexalobular socket countersunk flat head screws
09/30208227 DC : 0	BS ISO 1482 - SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
NF EN ISO 7380-1 : 2011	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
MS 16843 : H	CLAMP, WIRE ROPE (DOUBLE GRIP), THREADED, STEEL, TYPE 4
09/30208245 DC : 0	BS ISO 7051 - CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
BS ISO 8992:2005	Fasteners. General requirements for bolts, screws, studs and nuts
05/30127096 DC : DRAFT FEB 2005	ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
BS ISO 4161:2012	Hexagon nuts with flange, style 2. Coarse thread
DIN EN ISO 7053:2011-11	HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011)
UNE-EN ISO 7053:2011	Hexagon washer head tapping screws (ISO 7053:2011)
I.S. EN ISO 1891-2:2014	FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS (ISO 1891-2:2014)
I.S. EN ISO 4766:2011	SLOTTED SET SCREWS WITH FLAT POINT
I.S. EN ISO 14582:2013	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
PREN ISO 1483 : DRAFT 2009	SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
DIN EN ISO 10511:2016-05 (Draft)	PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012)
DIN EN ISO 10644:2009-10	SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV
DIN EN ISO 1207:2011-10	Slotted cheese head screws - Product grade A (ISO 1207:2011)
DIN EN ISO 10513:2016-05 (Draft)	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012)
DIN EN ISO 4033:2016-05 (Draft)	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012)
UNE-EN ISO 7045:2012	Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
UNE-EN ISO 7042:2013	Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)
BS EN ISO 4034:2012	Hexagon regular nuts (style 1). Product grade C
UNE-EN ISO 7040:2013	Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)
ISO 1481:2011	Slotted pan head tapping screws
ISO 14584:2011	Hexalobular socket raised countersunk head screws
UNE-EN ISO 14583:2011	Hexalobular socket pan head screws (ISO 14583:2011)
ISO 2010:2011	Slotted raised countersunk head screws Product grade A
UNE-EN ISO 4016:2011	Hexagon head bolts - Product grade C (ISO 4016:2011)
UNE-EN ISO 10511:2013	Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)
UNE-EN ISO 14587:2011	Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
BS EN ISO 2009:2011	Slotted countersunk flat head screws. Product grade A
BS EN ISO 7093-1:2000	Plain washers. Large series Product grade A
BS EN ISO 8675:2012	Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B
BS EN ISO 2010:2011	Slotted raised countersunk head screws. Product grade A
BS EN ISO 4026:2003	Hexagon socket set screws with flat point
BS EN ISO 7040:2012	Prevailing torque type hexagon regular nuts (with non-metallic insert). Property classes 5, 8 and 10
BS EN ISO 7094:2000	PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C
DIN EN ISO 4016:2011-06	Hexagon head bolts - Product grade C (ISO 4016:2011)
DIN EN 14218:2003-09	HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD
DIN EN ISO 14583:2011-06	Hexalobular socket pan head screws (ISO 14583:2011)
DIN EN ISO 21269:2004-06	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
DIN EN ISO 2342:2004-05	Slotted headless screws with shank (ISO 2342:2003)
DIN EN ISO 4014:2011-06	Hexagon head bolts - Product grades A and B (ISO 4014:2011)
DIN EN ISO 14580:2011-06	Hexalobular socket cheese head screws (ISO 14580:2011)
DIN EN ISO 4036:2013-04	HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012)
DIN EN 13858:2007-02	Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components
DIN EN ISO 4018:2011-07	Hexagon head screws - Product grade C (ISO 4018:2011)

Standards Referencing This Book - (Show below) - (Hide below)

ISO 16047:2005	Fasteners — Torque/clamp force testing
ISO 8991:1986	Designation system for fasteners
ISO 16426:2002	Fasteners — Quality assurance system
ISO 965-2:1998	ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads Medium quality
ISO 1463:2003	Metallic and oxide coatings Measurement of coating thickness Microscopical method
ISO 4017:2014	Fasteners Hexagon head screws Product grades A and B
ISO 4032:2012	Hexagon regular nuts (style 1) Product grades A and B
ISO 1502:1996	ISO general-purpose metric screw threads Gauges and gauging
ISO 7089:2000	Plain washers Normal series Product grade A
ISO 6932:2014	Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
ISO 9227:2017	Corrosion tests in artificial atmospheres — Salt spray tests
ISO 965-1:2013	ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data
ISO 965-3:1998	ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads
ISO 3613:2010	Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods
ISO 6988:1985	Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture
ISO 3269:2000	Fasteners Acceptance inspection
ISO 4014:2011	Hexagon head bolts Product grades A and B

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account