• There are no items in your cart

ISO 10848-1:2017

Current
Current

The latest, up-to-date edition.

Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

09-14-2017

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. These measurements are performed in a laboratory test facility or in the field.

The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as the normalized flanking level difference and/or normalized flanking impact sound pressure level) or as the vibration reduction index of a junction or the normalized direction-average vibration level difference of a junction.

Two approaches are used for structure-borne sound sources in buildings, a normalized flanking equipment sound pressure level and a transmission function that can be used to estimate sound pressure levels in a receiving room due to structure-borne excitation by service equipment in a source room. The former approach assumes that flanking transmission is limited to one junction (or no junction if the element supporting the equipment is the separating element), and the latter considers the combination of direct (if any) and all flanking transmission paths.

ISO 10848-1:2017 contains definitions, general requirements for test elements and test rooms, and measurement methods. Guidelines are given for the selection of the quantity to be measured, depending on the junction and the types of building elements involved. Other parts of ISO 10848 specify the application for different types of junction and building elements.

The quantities characterizing the flanking transmission can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354‑1 and ISO 12354‑2.

Committee
ISO/TC 43/SC 2
DevelopmentNote
Supersedes ISO/FDIS 10848-1. (09/2017)
DocumentType
Standard
Pages
35
ProductNote
THIS STANDARD ALSO REFERS TO NT ACOU 090
PublisherName
International Organization for Standardization
Status
Current
Supersedes

08/30087655 DC : 0 ISO 10140-4 - ACOUSTICS LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 4: MEASUREMENT PROCEDURES AND REQUIREMENTS
BS EN 15657:2017 Acoustic properties of building elements and of buildings. Laboratory measurement of structure-borne sound from building service equipment for all installation conditions
NF EN ISO 10848-2 : 2017 ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 2: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SMALL INFLUENCE
DIN EN 15657 E : 2017 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
UNI EN 15657-1 : 2009 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE
UNE-EN ISO 10848-4:2011 Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 4: Application to junctions with at least one heavy element (ISO 10848-4:2010)
UNI EN ISO 10140-4 : 2010 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 4: MEASUREMENT PROCEDURES AND REQUIREMENTS
I.S. EN ISO 12354-2:2017 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS (ISO 12354-2:2017)
ISO 10848-3:2017 Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 3: Application to Type B elements when the junction has a substantial influence
I.S. EN 15657-1:2009 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE
EN ISO 10848-3:2017 Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017)
BS EN ISO 10848-3:2017 Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Application to Type B elements when the junction has a substantial influence
DIN EN ISO 12354-1 E : 2017 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017)
BS EN ISO 140-18:2006 Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurement of sound generated by rainfall on building elements
EN ISO 12354-2:2017 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms (ISO 12354-2:2017)
DIN EN 13830:2015-07 CURTAIN WALLING - PRODUCT STANDARD
DIN EN ISO 140-18:2007-02 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 18: LABORATORY MEASUREMENT OF SOUND GENERATED BY RAINFALL ON BUILDING ELEMENTS
BS EN ISO 10140-4:2010 Acoustics. Laboratory measurement of sound insulation of building elements Measurement procedures and requirements
15/30316475 DC : 0 BS EN ISO 10140-4 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 4: MEASUREMENT PROCEDURES AND REQUIREMENTS
BS EN ISO 10848-4:2017 Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Application to junctions with at least one Type A element
16/30334498 DC : 0 BS EN ISO 12354-2 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS
BS EN ISO 12354-2:2017 Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Impact sound insulation between rooms
I.S. EN ISO 10848-2:2017 ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING RMS - PART 2: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SMALL INFLUENCE (ISO 10848-2:2017)
NF EN ISO 10848-4 : 2017 ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 4: APPLICATION TO JUNCTIONS WITH AT LEAST ONE TYPE A ELEMENT
ISO 12354-1:2017 Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms
UNE-EN ISO 10140-4:2011 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)
EN ISO 12354-1:2017 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017)
EN ISO 10848-4:2017 Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 4: Application to junctions with at least one Type A element (ISO 10848-4:2017)
DIN EN ISO 10140-4:2010-12 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)
I.S. EN 13830:2015 CURTAIN WALLING - PRODUCT STANDARD
DIN EN 15657-1:2009-10 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE
VDI 3755:2015-01 Sound insulation and sound absorption of suspended ceilings
NF EN ISO 10848-3 : 2017 ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 3: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SUBSTANTIAL INFLUENCE
BS EN 15657-1:2009 Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
DIN EN 15657:2016-02 (Draft) ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
DIN EN ISO 12354-1:2016-03 (Draft) BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017)
DIN EN ISO 10140-4:2015-12 (Draft) ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 4: MEASUREMENT PROCEDURES AND REQUIREMENTS
I.S. EN ISO 140-18:2006 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 18: LABORATORY MEASUREMENT OF SOUND GENERATED BY RAINFALL ON BUILDING ELEMENTS
I.S. EN ISO 12354-1:2017 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017)
EN ISO 10848-2:2017 Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017)
I.S. EN ISO 10848-3:2017 ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING RMS - PART 3: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SUBSTANTIAL INFLUENCE (ISO 10848-3:2017)
UNE-EN 13830:2016 Curtain walling - Product standard
EN 13830:2015 Curtain walling - Product standard
ONORM EN 13830 : 2015 CURTAIN WALLING - PRODUCT STANDARD
DIN EN ISO 10140-4 E : 2010 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 4: MEASUREMENT PROCEDURES AND REQUIREMENTS
I.S. EN ISO 10140-4:2010 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 4: MEASUREMENT PROCEDURES AND REQUIREMENTS
I.S. EN ISO 10848-4:2017 ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING RMS - PART 4: APPLICATION TO JUNCTIONS WITH AT LEAST ONE TYPE A ELEMENT (ISO 10848-4:2017)
I.S. EN 15657:2017 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
ISO 10848-4:2017 Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 4: Application to junctions with at least one Type A element
ISO 10848-2:2017 Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence
ISO 12354-2:2017 Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms
ISO 10140-4:2010 Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements
BS EN 13830:2015 Curtain walling. Product standard
ISO 140-18:2006 Acoustics Measurement of sound insulation in buildings and of building elements Part 18: Laboratory measurement of sound generated by rainfall on building elements
EN ISO 140-18:2006 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 18: Laboratory measurement of sound generated by rainfall on building elements (ISO 140-18:2006)
EN 15657-1:2009 Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
EN 15657:2017 Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions
BS EN ISO 10848-2:2017 Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Application to Type B elements when the junction has a small influence
EN ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)
16/30344233 DC : 0 BS EN ISO 10848-4 - MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 4: APPLICATION TO JUNCTIONS WITH AT LEAST ONE TYPE A ELEMENT
BS EN ISO 12354-1:2017 Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Airborne sound insulation between rooms
16/30333609 DC : 0 BS EN 15657 - ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
DIN EN 15657:2017-10 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS

IEC 61183:1994 Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
ISO 10848-2:2017 Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence
ISO 10140-2:2010 Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation
ISO 717-2:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation
ISO 3382-2:2008 Acoustics Measurement of room acoustic parameters Part 2: Reverberation time in ordinary rooms
ISO 7626-1:2011 Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications
IEC 60942:2003 Electroacoustics - Sound calibrators
OIML R 58 : 1998 SOUND LEVEL METERS
ISO 7626-5:1994 Vibration and shock Experimental determination of mechanical mobility Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
ISO 10140-4:2010 Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements
ISO 7626-2:2015 Mechanical vibration and shock Experimental determination of mechanical mobility Part 2: Measurements using single-point translation excitation with an attached vibration exciter
ISO 12354-1:2017 Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms
OIML R 88 : 1998 INTEGRATING-AVERAGING SOUND LEVEL METERS
EN 15657:2017 Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions
ISO 1683:2015 Acoustics Preferred reference values for acoustical and vibratory levels
ISO 18233:2006 Acoustics Application of new measurement methods in building and room acoustics
ISO 717-1:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
ISO 5348:1998 Mechanical vibration and shock Mechanical mounting of accelerometers
ISO 10140-5:2010 Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment
IEC 61672-3:2013 Electroacoustics - Sound level meters - Part 3: Periodic tests
ISO 10848-4:2017 Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 4: Application to junctions with at least one Type A element
ISO 15186-1:2000 Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements
ISO 12354-2:2017 Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms
ISO 10848-3:2017 Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 3: Application to Type B elements when the junction has a substantial influence

View more information
US$175.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.