ISO 11171:2016
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hydraulic fluid power Calibration of automatic particle counters for liquids
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
12-03-2020
Language(s)
English, French
Published date
10-05-2016
ISO 11171:2016 specifies procedures for the following:
a) primary particle-sizing calibration, sensor resolution and counting performance of automatic particle counters (APCs) for liquids capable of analysing bottle samples;
b) secondary particle-sizing calibration using suspensions verified with a primary calibrated APC;
c) establishing acceptable operation and performance limits;
d) verifying particle sensor performance using a truncated test dust;
e) determining coincidence and flow rate limits.
| DevelopmentNote |
Supersedes ISO 4402. (01/2000) Supersedes NFPA T2.9.6 (09/2004) Supersedes ISO/DIS 11171. (10/2016)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SS-ISO 11171:2018 | Identical |
| UNI ISO 11171 : 2017 | Identical |
| NEN ISO 11171 : 2016 | Identical |
| NF ISO 11171 : 2011 | Identical |
| BS ISO 11171:2016 | Identical |
| GOST R ISO 11171 : 2012 | Identical |
| SAC GB/T 18854 : 2002 | Identical |
| BS 7403-12:2000 | Full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting, and contaminant retention capacity |
| DD ISO/TS 11365:2011 | Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| BS EN 60970:2007 | Insulating liquids. Methods for counting and sizing particles |
| MIL-DTL-8815-31 Base Document:2009 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3,000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F |
| 05/30098238 DC : 0 | ISO 21081-2 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 2: FILTER BLOCKAGE TECHNIQUE |
| 01/120731 DC : DRAFT FEB 2001 | BS ISO 13323-3 - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SINGLE PARTICLE LIGHT INTERACTION METHODS - PART 3: SINGLE-PARTICLE LIGHT-EXTINCTION DEVICE DESIGN, PERFORMANCE SPECIFICATIONS AND OPERATION REQUIREMENTS |
| BS ISO 16431:2012 | Hydraulic fluid power. System clean-up procedures and verification of cleanliness of assembled systems |
| 07/19969755 DC : 0 | BS ISO 11500 - HYDRAULIC FLUID POWER - DETERMINATION OF PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT EXTINCTION PRINCIPLE |
| BS ISO 14085-3:2015 | Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity |
| BS ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity |
| 05/30129166 DC : DRAFT OCT 2005 | BS ISO 281 - ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE |
| BS ISO 281:2007 | Rolling bearings. Dynamic load ratings and rating life |
| EI 1570 : 2012 | HANDBOOK ON ELECTRONIC SENSORS FOR THE DETECTION OF PARTICULATE MATTER AND/OR FREE WATER DURING AIRCRAFT REFUELLING |
| BS ISO 4406:2017 | Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles |
| ISO 28521:2009 | Ships and marine technology — Hydraulic oil systems — Guidance for grades of cleanliness and flushing |
| I.S. EN 61221:2004 | PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS |
| ISO 21018-3:2008 | Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 3: Use of the filter blockage technique |
| SAE J 1985 : 2013 | FUEL FILTERS - INITIAL SINGLE-PASS EFFICIENCY TEST METHOD |
| ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
| ASTM D 8072 : 2017 | Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation |
| ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
| SAE ARP 1953 : 2014 | ACCEPTANCE TEST PROCEDURES AND STANDARDS TO ENSURE CLEAN FUEL SYSTEM COMPONENTS |
| MIL-DTL-83133 Revision K:2018 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| PD ISO/TR 15640:2011 | Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters |
| MIL-STD-419 Revision E:2010 | CLEANING, PROTECTING, AND TESTING PIPING, TUBING, AND FITTINGS FOR HYDRAULIC POWER TRANSMISSION EQUIPMENT |
| 05/30098184 DC : DRAFT MAY 2005 | ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
| ASTM D 6786 : 2015 : REDLINE | Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters |
| ISO/TS 13353:2002 | Diesel fuel and petrol filters for internal combustion engines Initial efficiency by particule counting |
| 08/30168621 DC : DRAFT JAN 2008 | BS ISO 28521 - SHIPS AND MARINE TECHNOLOGY - HYDRAULIC OIL SYSTEMS - GUIDANCE FOR GRADES OF CLEANLINESS AND FLUSHING |
| 16/30266482 DC : 0 | BS ISO 12669 - HYDRAULIC FLUID POWER - METHOD FOR DETERMINING THE REQUIRED CLEANLINESS LEVEL (RCL) FOR A SYSTEM |
| MIL-DTL-25524 Revision F:2015 | TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS) |
| 05/30138884 DC : DRAFT SEP 2005 | |
| BS EN 61221:2004 | Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications |
| MIL-DTL-8815-32 Base Document:2010 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, H-60 AIRCRAFT |
| DIN ISO 281:2010-10 | Rolling bearings - Dynamic load ratings and rating life (ISO 281:2007) |
| PD ISO/TR 1281-2:2008 | Rolling bearings. Explanatory notes on ISO 281 Modified rating life calculation, based on a systems approach to fatigue stresses |
| 14/30273508 DC : 0 | BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
| ASTM D 8166 : 2017 | Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters |
| ISO 16431:2012 | Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled systems |
| NFE 48 695 : 2003 | HYDRAULIC FLUID POWER - PARTS AND COMPONENTS - EXPRESSION OF PARTICULATE POLLUTION MEASUREMENT RESULTS |
| ISO 14085-3:2015 | Aerospace series Hydraulic filter elements Test methods Part 3: Filtration efficiency and retention capacity |
| BS ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
| ASTM D 7684 : 2011 | Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants |
| NF ISO 21018-1 : 2008 | HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
| ISO 9940:2015 | Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification |
| ASTM D 7416 : 2009 : R2015 | Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester |
| DIN ISO 281 Beiblatt 5:2011-10 | ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE |
| BS ISO 21018-1:2008 | Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid General principles |
| BS ISO 23309:2007 | Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing |
| ISO 16232-9:2007 | Road vehicles Cleanliness of components of fluid circuits Part 9: Particle sizing and counting by automatic light extinction particle counter |
| BS ISO 10050:2005 | Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| 15/30284298 DC : 0 | BS ISO 12103-1 - ROAD VEHICLES - TEST CONTAMINANTS FOR FILTER EVALUATION - PART 1: ARIZONA TEST DUST |
| PD ISO/TS 18409:2018 | Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
| 08/30168618 DC : DRAFT JAN 2008 | BS ISO 28523 - SHIPS AND MARINE TECHNOLOGY - SAMPLING FROM LUBRICATING OIL AND HYDRAULIC OIL SYSTEMS - GUIDANCE FOR SAMPLING FOR DETERMINATION OF CLEANLINESS AND SOLID PARTICLE CONTAMINATION |
| BS ISO 12103-1:2016 | Road vehicles. Test contaminants for filter evaluation Arizona test dust |
| PD ISO/TS 16431:2002 | Hydraulic fluid power. Assembled systems. Verification of cleanliness |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| 16/30273511 DC : 0 | BS ISO 23309 - HYDRAULIC FLUID POWER SYSTEMS - ASSEMBLED SYSTEMS - METHODS OF CLEANING LINES BY FLUSHING |
| 16/30323482 DC : 0 | BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
| MIL-PRF-87252 Revision D:2015 | COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
| ISO/TR 16386:2014 | Impact of changes in ISO fluid power particle counting Contamination control and filter test standards |
| ASTM D 7619 : 2017 : REDLINE | Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter |
| ISO 8068:2006 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
| SAE ARP 1827C : 2014 | MEASURING AIRCRAFT GAS TURBINE ENGINE FINE FUEL FILTER ELEMENT PERFORMANCE |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ASTM D 7417 : 2017 : REDLINE | Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter) |
| ISO/TR 16144:2002 | Hydraulic fluid power Calibration of liquid automatic particle counters Procedures used to certify the standard reference material SRM 2806 |
| BS ISO 18413:2015 | Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity |
| SAE J 1227 : 2013 | ASSESSING CLEANLINESS OF HYDRAULIC FLUID POWER COMPONENTS AND SYSTEMS |
| ASTM D 7647 : 2010 | Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction |
| NF ISO 16232-9 : 2011 | ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 9: PARTICLE SIZING AND COUNTING BY AUTOMATIC LIGHT EXTINCTION PARTICLE COUNTER |
| ISO 21018-4:2016 | Hydraulic fluid power Monitoring the level of particulate contamination in the fluid Part 4: Use of the light extinction technique |
| ISO/TS 11365:2011 | Petroleum and related products Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
| ISO 12584:2013 | Aerospace Hydraulic fluid components Expression of particulate contamination levels |
| ISO 18436-5:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
| I.S. EN 60970:2007/AC:2008 | INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ASTM D 6813 : 2002 : REV A : R2007 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 6813 : 2002 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 6813 : 2002 : REV A : R2013 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
| ASTM D 6813 : 2002 : REV A | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| SAE ARP 5941 : 2014 | AEROSPACE FLUID POWER - CONTAMINATION SENSITIVITY - CONSIDERATIONS FOR ESTABLISHING TEST PROCEDURES FOR FLIGHT CONTROL ACTUATORS |
| SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
| ISO 21018-1:2008 | Hydraulic fluid power Monitoring the level of particulate contamination of the fluid Part 1: General principles |
| BS ISO 9940:2015 | Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
| 11/30187639 DC : 0 | BS ISO 12584 - AEROSPACE - HYDRAULIC FLUID COMPONENTS - EXPRESSION OF PARTICULATE CONTAMINATION LEVELS |
| NF ISO 21018-3 : 2008 | HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 3: USE OF THE FILTER BLOCKAGE TECHNIQUE |
| DIN ISO 281 Beiblatt 3:2009-07 | ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE - SUPPLEMENT 3: ESTIMATING OF THE CONTAMINATION FACTOR RESPECTIVELY THE CONTAMINATION LEVEL FOR ROLLING BEARINGS IN CLOSED INDUSTRIAL GEAR UNITS |
| NF ISO 11500 : 2008 | HYDRAULIC FLUID POWER - DETERMINATION OF THE PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT-EXTINCTION PRINCIPLE |
| BS ISO 8068:2006 | Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines |
| 13/30271035 DC : 0 | BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY |
| BS ISO 21018-3:2008 | Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid Use of the filter blockage technique |
| 05/30098235 DC : 0 | ISO 21081-1 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
| DD ISO/TR 16144:2002 | Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806 |
| 17/30360001 DC : 0 | BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
| 14/30302298 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| BS ISO 11500:2008 | Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| BS ISO 18436-5:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
| 00/704296 DC : DRAFT FEB 2000 | ISO/CD 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - METHOD FOR ACHIEVING ROLL-OFF CLEANLINESS |
| BS ISO 12584:2013 | Aerospace. Hydraulic fluid components. Expression of particulate contamination levels |
| SAE ARP 5454 : 2014 | MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF FINE LUBE FILTER ELEMENTS UTILIZED IN AEROSPACE POWER AND PROPULSION LUBRICATION SYSTEMS |
| 16/30316730 DC : 0 | BS ISO 4548-12 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 12: FILTRATION EFFICIENCY USING PARTICLE COUNTING, AND CONTAMINANT RETENTION CAPACITY |
| BS ISO 16232-9:2007 | Road vehicles. Cleanliness of components of fluid circuits Particle sizing and counting by automatic light extinction particle counter |
| ISO 11943:1999 | Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation |
| ASTM D 7416 : 2009 | Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| IEEE C57.152-2013 | IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors |
| SAE AIR 1666 : 2014 | PERFORMANCE TESTING OF LUBRICANT FILTER ELEMENTS UTILIZED IN AIRCRAFT POWER AND PROPULSION LUBRICATION SYSTEMS |
| ISO 11365:2017 | Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
| NF ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
| ASTM D 7684 : 2011 : R2016 | Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants |
| SAE J 2312 : 2013 | AUTOMATIC TRANSMISSION INTAKE FILTER TEST PROCEDURE |
| ISO/TS 11366:2011 | Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
| ISO 10050:2005 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| ISO/TR 15640:2011 | Hydraulic fluid power contamination control General principles and guidelines for selection and application of hydraulic filters |
| ISO 28523:2009 | Ships and marine technology — Lubricating and hydraulic oil systems — Guidance for sampling to determine cleanliness and particle contamination |
| I.S. CWA 15375:2005 | SEPARATORS FOR MARINE RESIDUAL FUEL - PERFORMANCE TESTING USING SPECIFIC TEST OIL |
| ASTM D 6973 : 2014 : REDLINE | Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump |
| IEC 60970:2007 | Insulating liquids - Methods for counting and sizing particles |
| BS ISO/TR 16386:1999 | Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
| IEC 61221:2004 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| 08/30187368 DC : DRAFT JULY 2008 | BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
| 08/30187364 DC : DRAFT JULY 2008 | BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
| EN 60970:2007/corrigendum:2008 | INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
| EI 1598 : 2012 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL |
| 15/30321906 DC : 0 | BS ISO 11943 - HYDRAULIC FLUID POWER - ON-LINE AUTOMATIC PARTICLE-COUNTING SYSTEMS FOR LIQUIDS - METHODS OF CALIBRATION AND VALIDATION |
| 04/30098167 DC : DRAFT APR 2004 | ISO 16232-9 - ROAD VEHICLES - FLUID CIRCUITS - CLEANLINESS OF COMPONENTS - PART 9: PARTICLE SIZING AND COUNTING BY AUTOMATIC LIGHT EXTINCTION PARTICLE COUNTER |
| PD ISO/TR 16386:2014 | Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
| ISO/TR 1281-2:2008 | Rolling bearings Explanatory notes on ISO 281 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses |
| BS ISO 11365:2017 | Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
| 08/30190684 DC : DRAFT OCT 2008 | BS ISO 18436-5 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
| BS ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity |
| 09/30176303 DC : 0 | BS ISO 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - SYSTEM CLEAN-UP PROCEDURES AND VERIFICATION OF CLEANLINESS |
| 98/717481 DC : DRAFT DEC 1998 | ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT |
| 05/30098254 DC : DRAFT JUL 2005 | ISO 23309 - HYDRAULIC FLUID POWER - PIPING SYSTEMS - METHODS FOR CLEANING AND FLUSHING |
| ISO/TS 18409:2018 | Hydraulic fluid power Hose and hose assemblies Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
| DIN 51515-2:2010-02 | Lubricants and governor fluids for turbines - Minimum requirements - Part 2: Turbine oils TG for high temperature service |
| UNI ISO 4406 : 2013 | HYDRAULIC FLUID POWER - FLUIDS - METHOD FOR CODING THE LEVEL OF CONTAMINATION BY SOLID PARTICLES |
| DIN 51515-1:2010-02 | Lubricants and governor fluids for turbines - Minimum requirements - Part 1: Turbine oils TD for normal service |
| CEI EN 60970 : 2007 | INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
| MIL-DTL-8815-33 Base Document:2011 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3500 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, AVIATION GROUND POWER UNIT (AGPU) |
| UNI ISO 18436-5 : 2013 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| BS ISO 21018-4:2016 | Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid Use of the light extinction technique |
| ISO 18413:2015 | Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| SAE J 2333 : 2013 | SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEMS - FILTER SELECTION PARAMETERS |
| ISO 23309:2007 | Hydraulic fluid power systems Assembled systems Methods of cleaning lines by flushing |
| DD ISO/TS 11366:2011 | Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
| EN 61221:2004 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO/TR 16144:2002 | Hydraulic fluid power Calibration of liquid automatic particle counters Procedures used to certify the standard reference material SRM 2806 |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| ISO 21501-3:2007 | Determination of particle size distribution Single particle light interaction methods Part 3: Light extinction liquid-borne particle counter |
| ISO 3722:1976 | Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods |
| ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ISO 4402:1991 | Hydraulic fluid power — Calibration of automatic-count instruments for particles suspended in liquids — Method using classified AC Fine Test Dust contaminant |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.