ISO 11452-5:2002
Current
Current
The latest, up-to-date edition.
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline
Available format(s)
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
05-09-2002
This part of ISO 11452 specifies stripline tests for determining the immunity of electronic components for passenger cars and commercial vehicles to electrical distrubances from narrowband electromagnetic energy, regardless of the vehicle propulsion system (e.g. spark-ignition engine, diesel engine, electric motor). As the performance of these tests depends on the exposure of the equipment harness to a disturbance field, the applicability of this part of ISO 11452 is limited to equipment harnesses, which have a maximum diameter of one-third the stripline height or less.
The electromagnetic disturbances considered are limited to continuous narrowband electromagnetic fields.
| Committee |
ISO/TC 22/SC 32
|
| DevelopmentNote |
Supersedes ISO/DIS 11452-5 (06/2002)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SAC GB/T 33014.5 : 2016 | Identical |
| UNE 26472-5:2001 | Identical |
| SS-ISO 11452-5 : 2006 | Identical |
| NEN ISO 11452-5 : 2002 | Identical |
| NF ISO 11452-5 : 2004 | Identical |
| DIN ISO 11452-5:2000-03 | Identical |
| BS ISO 7634:2007 | Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures |
| 15/30321305 DC : 0 | BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| SAE J ISO 13766 : FEB 2003 | EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| PREN 15194 : DRAFT 2015 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| 17/30358367 DC : 0 | BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS |
| 01/714099 DC : DRAFT OCT 2001 | ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
| UNE-EN 13309:2010 | Construction machinery - Electromagnetic compatibility of machines with internal power supply |
| DEFSTAN 59-411(PT1)/2(2014) : 2014 | ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING |
| EN 13309:2010 | Construction machinery - Electromagnetic compatibility of machines with internal power supply |
| EN 62132-4:2006 | Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method |
| SAE J1113/1:2023 | Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) |
| DEFSTAN 59-411(PT1)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING |
| CSA M14982 : 2000 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| 00/706017 DC : DRAFT MAR 2000 | BS ISO 15763 - ROAD VEHICLES - ALARM SYSTEMS FOR COMMERCIAL VEHICLES |
| 09/30191130 DC : DRAFT FEB 2009 | BS EN 61967-8 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS - PART 8: MEASUREMENT OF RADIATED EMISSIONS - IC STRIPLINE METHOD |
| SAE J 2578 : 2014 | RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY |
| ISO 13766-2:2018 | Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 2: Additional EMC requirements for functional safety |
| BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
| CEI 79-51 : 2006 | COMMUNICATION PROTOCOL FOR SECURITY INFORMATION (ALARMS) - PART 1: TRANSPORT LAYERS |
| ISO 14982:1998 | Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria |
| I.S. EN 13309:2010 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| I.S. EN ISO 14982:2009 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| CEI EN 62132-4 : 2006 | CIRCUITS INTEGRES - MESURE DE L'IMMUNITE ELECTROMAGNETIQUE 150 KHZ A 1 GHZ - PARTIE 4: METHODE D'INJECTION DIRECTE DE PUISSANCE RF |
| 06/30157139 DC : 0 | |
| 09/30191126 DC : DRAFT FEB 2009 | BS EN 62132-8 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 8: MEASUREMENT OF RADIATED IMMUNITY - IC STRIP LINE METHOD |
| NF ISO 13766 : 1999 | EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| SAE J 2357 : 2012 | APPLICATION GUIDELINES FOR ELECTRONICALLY DRIVEN AND/OR CONTROLLED EXTERIOR AUTOMOTIVE LIGHTING EQUIPMENT |
| BS EN 62132-4:2006 | Integrated circuits. Measurement of electromagnetic immunity. 150 kHz to 1 GHz Direct RF power injection method |
| ISO/TR 15497:2000 | Road vehicles Development guidelines for vehicle based software |
| ISO 11835:2002 | Road vehicles Motor vehicles with antilock braking systems (ABS) Measurement of braking performance |
| I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| ISO 15763:2002 | Road vehicles — Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t |
| 04/30089279 DC : DRAFT FEB 2004 | ISO 21848 - ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR 42 V NETWORKS - ELECTRICAL LOADS |
| UNI EN 13309 : 2010 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| UNI EN ISO 14982 : 2009 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| 16/30316581 DC : 0 | BS EN ISO 13766-2 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMC REQUIREMENTS UNDER THE ASPECT OF FUNCTIONAL SAFETY |
| 16/30316578 DC : 0 | BS EN ISO 13766-1 - EARTH-MOVING- AND BUILDING CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL ELECTRICAL POWER SUPPLY - PART 1: GENERAL EMC REQUIREMENTS UNDER TYPICAL EMC ENVIRONMENTAL CONDITIONS |
| 05/30127980 DC : DRAFT JAN 2005 | ISO 13766 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| ISO 13766-1:2018 | Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 1: General EMC requirements under typical electromagnetic environmental conditions |
| ISO 13766:2006 | Earth-moving machinery Electromagnetic compatibility |
| IEC 60839-10-1:1995 | Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars |
| DIN EN ISO 14982:2009-12 | Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| IEC 62132-4:2006 | Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method |
| EN ISO 14982:2009 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
| BS ISO 7635:2006 | Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures |
| SAE J 1113/1 : 2013 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ) |
| 07/30171041 DC : DRAFT AUG 2007 | DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
| I.S. EN 62132-4:2006 | INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY 150 KHZ TO 1 GHZ - PART 4: DIRECT RF POWER INJECTION METHOD |
| CEI 79-56 : 2009 | BLACK BOX TYPE SYSTEMS: FUNCTIONAL REQUIREMENTS AND TESTS |
| ISO 7634:2007 | Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures |
| ISO 7635:2006 | Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test procedures |
| DIN EN 13309:2010-12 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| BS EN ISO 14982:2009 | Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria |
| BS EN 13309:2010 | Construction machinery. Electromagnetic compatibility of machines with internal power supply |
| ISO 11452-1:2015 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
US$111.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.