ISO 12100 : 2010(R2015)

Current

Current The latest, up-to-date edition.

Preview

SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION

Publisher: International Organization for Standardization

Published:

Available Formats: PDF - French, Hardcopy - French, PDF - Russian, Hardcopy - Russian, PDF - French, Hardcopy - French, PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Strategy for risk assessment and risk reduction
5 Risk assessment
6 Risk reduction
7 Documentation of risk assessment and risk reduction
Annex A (informative) - Schematic representation of a machine
Annex B (informative) - Examples of hazards, hazardous
situations and hazardous events
Annex C (informative) - Trilingual lookup and index of
specific terms and expressions used in ISO 12100
Bibliography

Abstract - (Show below) - (Hide below)

Describes basic terminology, principles and a methodology for achieving safety in the design of machinery.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Revision
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 199
Supersedes	ISO/DIS 12100 : 60.00 (2010) ISO 12100-1 : 2003 ISO 12100-2 : 2003 ISO 14121-1 : 2007 ISO 12100-1 : 2003 : AMD 1 ISO 12100-2 : 2003 : AMD 1

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN ISO 12100 : 2011	Identical
GOST ISO 12100 : 2013	Identical
NBN EN ISO 12100 : 2010	Identical
NBR ISO 12100 : 2013	Identical
NEN EN ISO 12100 : 2010	Identical
NS EN ISO 12100 : 2010 AC 2016	Identical
I.S. EN ISO 12100:2010	Identical
PN EN ISO 12100 : 2012	Identical
SANS 12100 : 1ED 2013	Identical
SAC GB/T 15706 : 2012	Identical
AS/NZS 4024.1201:2014	Identical
SN EN ISO 12100 : 2011	Identical
UNI EN ISO 12100 : 2010	Identical
SS-EN ISO 12100 : 2010	Identical
IS 16819 : 2018	Identical
ANSI/ISO 12100 : 2012	Identical
UNE EN ISO 12100 : 2012	Identical
BS EN ISO 12100 : 2010	Identical
EN ISO 12100 : 2010	Identical
NF EN ISO 12100 : 2010	Identical
DIN EN ISO 12100 : 2011	Identical
DIN EN ISO 12100 E : 2011	Identical
PN EN ISO 12100 : 2012	Identical
NBR ISO 12100 : 2013	Identical
NS EN ISO 12100 : 2010 AC 2016	Identical
AS/NZS 4024.1201:2014	Identical
GOST ISO 12100 : 2013	Identical
NF EN ISO 12100 : 2010	Identical
BS EN ISO 12100 : 2010	Identical
IS 16819 : 2018	Identical
DS EN ISO 12100 : 2011	Identical
DIN EN ISO 12100 E : 2011	Identical
NBN EN ISO 12100 : 2010	Identical
SANS 12100 : 1ED 2013	Identical
ANSI/ISO 12100 : 2012	Identical
DIN EN ISO 12100 : 2011-03	Identical
SN EN ISO 12100 : 2011	Identical
UNI EN ISO 12100 : 2010	Identical
SAC GB/T 15706 : 2012	Identical
UNE EN ISO 12100 : 2012	Identical
NEN EN ISO 12100 : 2010	Identical
SS-EN ISO 12100 : 2010	Identical
I.S. EN ISO 12100:2010	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

PREN 847-2 : DRAFT 2016	TOOLS FOR WOODWORKING - SAFETY REQUIREMENTS - PART 2: REQUIREMENTS FOR THE SHANK OF SHANK MOUNTED MILLING TOOLS/CIRCULAR SAW BLADES
DIN EN 16228-7 E : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 7: INTERCHANGEABLE AUXILIARY EQUIPMENT
PREN 1422 : DRAFT 2011	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 16307-5 : 2013	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: SUPPLEMENTARY REQUIREMENTS FOR PEDESTRIAN-PROPELLED TRUCKS
PREN 474-2 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 2: REQUIREMENTS FOR TRACTOR-DOZERS
DIN EN 16307-5 E : 2013	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: SUPPLEMENTARY REQUIREMENTS FOR PEDESTRIAN-PROPELLED TRUCKS
UNI EN 16590-4 : 2014	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES
DIN EN 15572 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
ISO 13854 : 2017	SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
UNI EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
DIN EN ISO 11148-10 E : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011)
BS EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
BS EN 15571 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
BS EN 1865-3 : 2012	PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 3: HEAVY DUTY STRETCHER
VDI 2510-2 : 2013	AUTOMATED GUIDED VEHICLE SYSTEMS (AGVS) - SAFETY OF AGVS
BS EN 16228-6 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
DIN EN 16203 E : 2014	SAFETY OF INDUSTRIAL TRUCKS - DYNAMIC TESTS FOR VERIFICATION OF LATERAL STABILITY - COUNTERBALANCED TRUCKS
16/30277585 DC : 0	BS ISO 20474-10 - EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS
DIN EN 16590-1 E : 2014	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT (ISO 25119-1:2010 MODIFIED)
DIN EN ISO 4414 E : 2011	PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
DIN ISO 1413 : 2015	HOROLOGY - SHOCK-RESISTANT WRIST WATCHES (ISO 1413:2016)
DIN EN 16750 : 2014	FIXED FIREFIGHTING SYSTEMS - OXYGEN REDUCTION SYSTEMS - DESIGN, INSTALLATION, PLANNING AND MAINTENANCE
ISO 20332 : 2016	CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES
UNE EN 60335-2-102 : 2016	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-102: PARTICULAR REQUIREMENTS FOR GAS, OIL AND SOLID-FUEL BURNING APPLIANCES HAVING ELECTRICAL CONNECTIONS
UNE EN ISO 14123-2 : 2016	SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH RESULTING FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 2: METHODOLOGY LEADING TO VERIFICATION PROCEDURES (ISO 14123-2:2015)
UNE EN ISO 28927-10 : 2011	HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS (ISO 28927-10:2011)
UNE EN 16228-4 : 2015	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT
I.S. EN ISO 10218-1:2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 1: ROBOTS
16/30313026 DC : 0	BS EN ISO 8437-4 - SNOWTHROWERS - SAFETY REQUIREMENTS AND TEST PROCEDURES - PART 4: INFORMATION ON NATIONAL AND REGIONAL PROVISIONS
BS EN 16564 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
I.S. EN ISO 5395-1:2013	GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS (ISO 5395-1:2013)
13/30291705 DC : 0	BS EN ISO 14122-3 - SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS
I.S. EN 16203:2014	SAFETY OF INDUSTRIAL TRUCKS - DYNAMIC TESTS FOR VERIFICATION OF LATERAL STABILITY - COUNTERBALANCED TRUCKS
DIN EN ISO 28927-10 E : 2011	HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS
I.S. EN 16252:2012	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
I.S. EN 16475-2:2017	CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS
15/30315964 DC : 0	BS EN 16831 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - FORMAT FOR REPORTING ACCIDENTS
14/30265058 DC : 0	BS EN ISO 13850 - SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
BS ISO 18063-1 : 2016	ROUGH-TERRAIN TRUCKS - VISIBILITY - TEST METHODS AND THEIR VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
DIN EN 1807-2 E : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
DIN EN 15503 E : 2016	GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY
CEN/TR 115-3 : 2017	SAFETY OF ESCALATORS AND MOVING WALKS - PART 3: CORRELATION BETWEEN EN 115-1:2008+A1:2010 AND EN 115-1:2017
PREN 1009-5 : DRAFT 2017	MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 5: SPECIFIC REQUIREMENTS FOR CLEANING, RECYCLING, SORTING AND MUD TREATMENT MACHINERY
BS 8611(2016) : 2016	ROBOTS AND ROBOTIC DEVICES - GUIDE TO THE ETHICAL DESIGN AND APPLICATION OF ROBOTS AND ROBOTIC SYSTEMS
PREN 474-8 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 8: REQUIREMENTS FOR GRADERS
PREN 474-12 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
PREN 474-10 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS
DIN EN 16475-2 E : 2017	CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS
DIN EN 16474 E : 2015	PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
ISO TS 20646 : 2014(R2018)	ERGONOMIC PROCEDURES FOR THE IMPROVEMENT OF LOCAL MUSCULAR WORKLOADS
BS ISO 20474-7 : 2017	EARTH-MOVING MACHINERY - SAFETY - PART 7: REQUIREMENTS FOR SCRAPERS
12/30265270 DC : 0	BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
UNI EN ISO 13482 : 2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS
UNI EN 15830 : 2012	ROUGH-TERRAIN VARIABLE REACH TRUCKS - VISIBILITY - TEST METHODS AND VERIFICATION
BS EN ISO 28927-3 : 2009	HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS
DIN EN 16203 : 2014	SAFETY OF INDUSTRIAL TRUCKS - DYNAMIC TESTS FOR VERIFICATION OF LATERAL STABILITY - COUNTERBALANCED TRUCKS
UNI EN 15861 : 2012	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 16005 : 2012	POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
UNI EN 691-1 : 2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN ISO 19932-1 : 2013	EQUIPMENT FOR CROP PROTECTION - KNAPSACK SPRAYERS - PART 1: SAFETY AND ENVIRONMENTAL REQUIREMENTS
BS EN 1034-8 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
BS EN ISO 10218-2 : 2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
DIN EN ISO 11148-11 E : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011)
BS EN ISO 19085-2 : 2017	WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES (ISO 19085-2:2017)
15/30286845 DC : 0	BS ISO 7076-6 - FOAM FIRE EXTINGUISHING SYSTEMS - PART 6: VEHICLE MOUNTED COMPRESSED AIR FOAM SYSTEMS
BS PD ISO/TR 12295 : 2014	ERGONOMICS - APPLICATION DOCUMENT FOR INTERNATIONAL STANDARDS ON MANUAL HANDLING (ISO 11228-1, ISO 11228-2 AND ISO 11228-3) AND EVALUATION OF STATIC WORKING POSTURES (ISO 11226)
BS ISO 20474-3 : 2017	EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS
11/30254129 DC : 0	BS EN 12547 - CENTRIFUGES - COMMON SAFETY REQUIREMENTS
DIN EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
14/30265073 DC : 0	BS EN ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
14/30245659 DC : 0	BS EN ISO 4254-14 - AGRICULTURAL MACHINERY - SAFETY - PART 14: BALE WRAPPERS
17/30356609 DC : 0	BS ISO 8100-2 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 2: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
UNE EN ISO 4414 : 2011	PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS (ISO 4414:2010)
I.S. EN ISO 4254-8:2018	AGRICULTURAL MACHINERY - SAFETY - PART 8: SOLID FERTILIZER DISTRIBUTORS (ISO 4254-8:2018)
ISO 13031 : 2016	EARTH-MOVING MACHINERY - QUICK COUPLERS - SAFETY
BS PD ISO/TR 20218-2 : 2017	ROBOTICS - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: MANUAL LOAD/UNLOAD STATIONS
DIN EN ISO 13856-1 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
PREN 474-5 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORS
DIN EN 1034-21 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
DIN EN 15955-2 : 2013	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS ISO 17966 : 2016	ASSISTIVE PRODUCTS FOR PERSONAL HYGIENE THAT SUPPORT USERS - REQUIREMENTS AND TEST METHODS
PREN 474-4 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS
PREN 81-80 : DRAFT 2016	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS
I.S. EN 16282-8:2017	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING
BS EN ISO 4254-11 : 2010	AGRICULTURAL MACHINERY - SAFETY - PART 11: PICK-UP BALERS
PREN 17180 : DRAFT 2017	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN ISO 11148-1 : 2012	Hand-held non-electric power tools – Safety requirements – Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
DIN EN 15700 E : 2012	SAFETY FOR CONVEYOR BELTS FOR WINTER SPORT OR LEISURE USE
BS ISO 12934 : 2013	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - BASIC TYPES - VOCABULARY
DIN EN 16191 E : 2014	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
PREN 474-9 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
DIN EN 16750 E : 2017	FIXED FIREFIGHTING SYSTEMS - OXYGEN REDUCTION SYSTEMS - DESIGN, INSTALLATION, PLANNING AND MAINTENANCE
BS ISO 19224 : 2017	CONTINUOUS SURFACE MINERS (CSM) - SAFETY REQUIREMENTS
UNI EN 16228-7 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 7: INTERCHANGEABLE AUXILIARY EQUIPMENT
BS EN 15949 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
BS EN 16590-1 : 2014	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT (ISO 25119-1:2010 MODIFIED)
DIN EN 16307-6 E : 2014	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS
DIN EN ISO 11850 E : 2016	MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011 + AMD 1:2016)
BS EN ISO 19085-5 : 2017	WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS (ISO 19085-5:2017)
12/30244783 DC : 0	BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
UNI EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
15/30296047 DC : 0	BS EN 16851 - CRANES - LIGHT CRANE SYSTEMS
DIN EN 16590-2 E : 2014	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED)
ISO 1413 : 2016	HOROLOGY - SHOCK-RESISTANT WRIST WATCHES
DIN EN ISO 20957-5 : 2015	STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-5:2016)
DIN EN 16831 E : 2017	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - FORMAT FOR REPORTING ACCIDENTS
DIN EN ISO 19353 : 2016	SAFETY OF MACHINERY - FIRE PREVENTION AND FIRE PROTECTION (ISO 19353:2015)
NF EN ISO 4414 : 2011	PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
BS ISO 20474-9 : 2017	EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
BS PD ISO/TR 22100-3 : 2016	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 3: IMPLEMENTATION OF ERGONOMIC PRINCIPLES IN SAFETY STANDARDS
DIN EN 16252 : 2013	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
BS EN ISO 11148-2 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011)
DIN EN 15165 : 2015	FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15954-1 : 2013	RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
BS ISO 20474-12 : 2017	EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
16/30277576 DC : 0	BS ISO 20474-7 - EARTH-MOVING MACHINERY - SAFETY - PART 7: REQUIREMENTS FOR SCRAPERS
16/30313020 DC : 0	BS EN ISO 8437-2 - SNOWTHROWERS - SAFETY REQUIREMENTS AND TEST PROCEDURES - PART 2: PEDESTRIAN CONTROLLED SNOW THROWERS
DIN EN 1034-26 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
DIN EN 16228-6 E : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
DIN EN ISO 13856-3 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
14/30296658 DC : 0	BS IEC 62046 ED1.0 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
13/30257895 DC : 0	BS EN 1755 - SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
15/30294708 DC : DRAFT MAY 2015	BS EN ISO 4254-5 - AGRICULTURAL MACHINERY - SAFETY - PART 5: POWER-DRIVEN SOIL-WORKING MACHINES
DIN EN 1807-1 E : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
DIN EN ISO 3691-5 E : 2017	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: PEDESTRIAN-PROPELLED TRUCKS (ISO 3691-5:2014)
DIN 32677 : 2016	DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - CONNECTORS TO TAPS OF DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES
I.S. EN 16590-3:2014	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE (ISO 25119-3:2010 MODIFIED)
UNE EN 1870-13 : 2008	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
DIN EN 16590-2 : 2014	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED)
UNE EN 16228-1 : 2015	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
ISO/IEC GUIDE 51 : 2014	SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
15/30326831 DC : 0	BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
IEC 60335-2-107 : 2.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS
NBR ISO 5395-3 : 2014	GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR
11/30249083 DC : 0	BS EN 60335-2-58:2005/FP - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES
12/30262894 DC : 0	BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
UNE EN ISO 16093 : 2017	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
BS EN 16228-2 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING
BS EN ISO 3691-5 : 2015	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: PEDESTRIAN-PROPELLED TRUCKS (ISO 3691-5:2014)
UNE EN ISO 11850 : 2012	MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011/AMD 1:2016)
ISO/IEC 15026-1 : 2013	SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY
14/30302455 DC : 0	BS EN 13659 - SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
DIN EN 1034-21 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
14/30297515 DC : 0	BS EN 16704-2-1 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGY - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS)
17/30325421 DC : 0	BS ISO 25119-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT
PREN 16307-2 : DRAFT 2017	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED VARIABLE-REACH TRUCKS
I.S. EN ISO 19085-8:2018	WOODWORKING MACHINES - SAFETY - PART 8: BELT SANDING AND CALIBRATING MACHINES FOR STRAIGHT WORKPIECES (ISO 19085-8:2017)
DIN EN 15059 : 2015	SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS
ISO 19085-8 : 2017	WOODWORKING MACHINES - SAFETY - PART 8: BELT SANDING AND CALIBRATING MACHINES FOR STRAIGHT WORKPIECES
UNI EN ISO 11148-2 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
11/30229163 DC : 0	BS EN ISO 19932-1 - EQUIPMENT FOR CROP PROTECTION - KNAPSACK SPRAYERS - PART 1: REQUIREMENTS AND TEST METHODS
PREN 12733 : DRAFT 2016	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
BS EN ISO 28927-11 : 2011	HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 11: STONE HAMMERS
12/30257301 DC : 0	BS EN ISO 20957-1 - STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 15059 E : 2015	SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS
DIN EN 16710-2 E : 2016	ERGONOMICS METHODS - PART 2: A METHODOLOGY FOR WORK ANALYSIS TO SUPPORT DESIGN
ISO 10896-5 : 2015	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: INTERFACE BETWEEN ROUGH-TERRAIN TRUCK AND INTEGRATED PERSONNEL WORK PLATFORM
PREN 50050-1 : DRAFT 2011	ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
DIN EN 1459-3 : 2015	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: INTERFACE BETWEEN THE VARIABLE-REACH TRUCK AND THE WORK PLATFORM
14/30263130 DC : 0	BS ISO 10896-4 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 4: ADDITIONAL REQUIREMENTS FOR VARIABLE REACH TRUCKS HANDLING FREELY SUSPENDED LOADS
BS EN 1870-19 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
I.S. EN 16831:2016	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - FORMAT FOR REPORTING ACCIDENTS
BS EN ISO 11148-1 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011)
UNI EN ISO 11148-7 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
BS EN ISO 11148-11 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011)
ISO 10896-7 : 2016	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 7: LONGITUDINAL LOAD MOMENT SYSTEMS
I.S. EN 81-77:2013	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATIONS OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 77: LIFTS SUBJECT TO SEISMIC CONDITIONS
DIN EN 691-1 : 2013	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN ISO 4413 E : 2011	HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
14/30304373 DC : 0	BS EN ISO 11111-5:2005/AMD 2 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 5: PREPARATORY MACHINERY TO WEAVING AND KNITTING
16/30346583 DC : 0	BS EN 13451-11 - SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVEABLE POOL FLOORS AND MOVEABLE BULKHEADS
DIN EN 1570-1 E : 2015	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
DIN EN 1865-5 E : 2012	PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 5: STRETCHER SUPPORT
I.S. EN ISO 11148-9:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011)
BS EN ISO 14123-1 : 2015	SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH RESULTING FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS
DIN EN 1034-8 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
11/30232437 DC : 0	BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 16228-3 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 3: HORIZONTAL DIRECTIONAL DRILLING EQUIPMENT (HDD)
11/30232867 DC : 0	BS EN 60519-12 - SAFETY IN ELECTRO HEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTRO HEATING INSTALLATIONS
UNI ISO 21940-23 : 2012	MECHANICAL VIBRATION - ROTOR BALANCING - PART 23: ENCLOSURES AND OTHER PROTECTIVE MEASURES FOR THE MEASURING STATION OF BALANCING MACHINES
BS EN ISO 28927-7 : 2009	HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 7: NIBBLERS AND SHEARS
DIN ISO/TS 81346-3 : 2013	INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012)
DIN EN 15955-1 : 2013	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
CEN/CENELEC GUIDE 11 : 2012	PRODUCT INFORMATION RELEVANT TO CONSUMERS - GUIDELINES FOR STANDARD DEVELOPERS
CEI EN 50636-2-94 : 2015	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS
I.S. EN 15811:2014	AGRICULTURAL MACHINERY - FIXED GUARDS AND INTERLOCKED GUARDS WITH OR WITHOUT GUARD LOCKING FOR MOVING TRANSMISSION PARTS (ISO/TS 28923:2012 MODIFIED)
14/30304364 DC : 0	BS EN ISO 11111-2:2005/AMD 2 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 2: SPINNING PREPARATORY AND SPINNING MACHINES
BS EN 16889 : 2016	FOOD HYGIENE - PRODUCTION AND DISPENSE OF HOT BEVERAGES FROM HOT BEVERAGE APPLIANCES - HYGIENE REQUIREMENTS, MIGRATION TEST
IEC 62046 : 2018	SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
15/30264711 DC : 0	BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
DIN EN ISO 11148-4 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
DIN EN 15955-2 E : 2013	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 1870-19 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
11/30249219 DC : 0	BS EN 50569 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
BS EN ISO 11148-3 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
PREN 12013 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
BS EN ISO 17916 : 2016	SAFETY OF THERMAL CUTTING MACHINES
13/30291003 DC : 0	BS EN ISO 14122-2 - SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS
DIN EN 1127-1 : 2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN 1570-2 : 2014	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
14/30302355 DC : 0	BS EN ISO 11553-1 ED.2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
DIN EN 16831 : 2015	TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - FORMAT FOR REPORTING ACCIDENTS
12/30254912 DC : 0	BS EN 690 - AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY
15/30291985 DC : 0	BS ISO 19202-1 - SUMMER TOBOGGAN RUNS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
16/30303351 DC : 0	BS EN ISO 8437-1 - SNOWTHROWERS - SAFETY REQUIREMENTS AND TEST PROCEDURES - PART 1: TERMINOLOGY AND COMMON TESTS
BS EN 50636-2-91 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS
13/30255092 DC : 0	BS EN 1417 - PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
BS EN ISO 11148-8 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011)
DIN EN ISO 11806-1 : 2012	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE (ISO 11806-1:2011)
15/30279899 DC : 0	BS ISO 1413 - HOROLOGY - SHOCK-RESISTANT WRIST WATCHES
NF EN ISO 11148-5 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY, PERCUSSIVE DRILLS
CEI EN 50571 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
DIN EN ISO 11148-6 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
DIN EN 1672-1 : 2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
ISO 19085-4 : 2018	WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES
I.S. EN ISO 4254-12:2012	AGRICULTURAL MACHINERY - SAFETY - PART 12: ROTARY DISC AND DRUM MOWERS AND FLAIL MOWERS (ISO 4254-12:2012)
BS EN 50050-2 : 2013	ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
BS ISO 20474-10 : 2017	EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS
ISO TR 14121-2 : 2012	SAFETY OF MACHINERY - RISK ASSESSMENT - PART 2: PRACTICAL GUIDANCE AND EXAMPLES OF METHODS
14/30272245 DC : 0	BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS
VDI 2263-6 : 2017	DUST FIRES AND DUST EXPLOSIONS - HAZARDS - ASSESSMENT - PROTECTIVE MEASURES - DUST FIRES AND EXPLOSION PROTECTION IN DUST EXTRACTING INSTALLATIONS
PREN 1473 : DRAFT 2018	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
DIN EN ISO 18217 : 2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
13/30286103 DC : 0	BS EN 12331 - FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
12/30265273 DC : DRAFT OCT 2012	BS EN 13001-3-2 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
15/30274138 DC : 0	BS EN ISO 18497 - AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHLY AUTOMATED MACHINERY
11/30243078 DC : 0	BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
11/30247811 DC : 0	BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
DIN SPEC 1330 : 2013	INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012)
PREN 13871 : DRAFT 2012	FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
PREN 13379 : DRAFT 2016	PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
BS EN 16282-5 : 2017	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING
11/30233818 DC : DRAFT DEC 2011	BS ISO 13031 - EARTH-MOVING MACHINERY - QUICK COUPLERS - SAFETY
CSA Z1001 : 2018	OCCUPATIONAL HEALTH AND SAFETY TRAINING
18/30372351 DC : DRAFT APR 2018	BS EN ISO 19085-11 - WOODWORKING MACHINES SAFETY - PART 11: COMBINED MACHINES
DIN EN 16475-2 : 2013	CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS
BS EN 15695-2 : 2017	AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 2: FILTERS, REQUIREMENTS AND TEST PROCEDURES
UNI EN 1870-19 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
DIN EN 1865-3 E : 2015	PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 3: HEAVY DUTY STRETCHER
UNI EN 16500 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN 16307-1 : 2015	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS
DIN EN ISO 13482 E : 2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
UNI EN ISO 11148-1 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
13/30256922 DC : 0	BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
BS ISO 20474-1 : 2017	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE EN 16228-2 : 2015	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING
DNV/GL-SE-0078 : LATEST	PROJECT CERTIFICATION OF PHOTOVOLTAIC POWER PLANTS
13/30277122 DC : 0	BS EN 12929-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS
DIN EN 16228-4 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT
16/30318924 DC : 0	BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES')
BS ISO 21940-23 : 2012	MECHANICAL VIBRATION - ROTOR BALANCING - PART 23: ENCLOSURES AND OTHER PROTECTIVE MEASURES FOR THE MEASURING STATION OF BALANCING MACHINES
I.S. EN 50636-2-107:2015	SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS
I.S. EN 15695-2:2017	AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 2: FILTERS, REQUIREMENTS AND TEST PROCEDURES
DIN EN ISO 28927-11 : 2011	HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 11: STONE HAMMERS
UNE EN 16889 : 2017	FOOD HYGIENE - PRODUCTION AND DISPENSE OF HOT BEVERAGES FROM HOT BEVERAGE APPLIANCES - HYGIENE REQUIREMENTS, MIGRATION TEST
UNE EN ISO 28927-8 : 2010	HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SMALL SAWS WITH OSCILLATING OR ROTATING ACTION - POLISHING MACHINES, MODIFIED FEED FORCES (ISO 28927-8:2009/AMD 1:2015)
DIN EN 691-1 E : 2013	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
16/30328756 DC : 0	BS EN 13814-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE
BS ISO 17253 : 2014	EARTH-MOVING MACHINERY AND ROUGH-TERRAIN VARIABLE-REACH TRUCKS - DESIGN REQUIREMENTS FOR MACHINES INTENDED TO BE DRIVEN ON ROAD
13/30276220 DC : 0	BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
12/30247154 DC : 0	BS ISO 17253 - EARTH-MOVING MACHINES AND ROUGH-TERRAIN VARIABLE REACH TRUCKS - DESIGN REQUIREMENTS FOR MACHINES INTENDED TO BE DRIVEN ON THE ROAD
VDI 2343-7 : 2014	RECYCLING OF ELECTRICAL AND ELECTRONICAL EQUIPMENT - RE-USE
BS ISO 10896-7 : 2016	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 7: LONGITUDINAL LOAD MOMENT SYSTEMS
14/30279071 DC : 0	BS EN ISO 12643-4 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 4: CONVERTING EQUIPMENT AND SYSTEMS
DIN EN 16228-7 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 7: INTERCHANGEABLE AUXILIARY EQUIPMENT
12/30236576 DC : 0	BS EN 12786 - SAFETY OF MACHINERY - RULES FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS
16/30277588 DC : 0	BS ISO 20474-11 - EARTH-MOVING MACHINERY - SAFETY - PART 11: REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS
BS EN ISO 18217 : 2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S)
16/30341470 DC : 0	BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS)
13/30279160 DC : 0	BS EN 6101-2-0120 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, LABORATORY USE - PART 2-0120: PARTICULAR SAFETY REQUIREMENTS FOR MACHINERY
17/30364322 DC : 0	BS EN 16307-2 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED VARIABLE REACH TRUCKS
NF EN ISO 4