|
DIN ISO 14635-2 : 2010
|
GEARS - FZG TEST PROCEDURES - PART 2: FZG STEP LOAD TEST A10/16, 6R/120 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY OF HIGH EP OILS |
|
DIN ISO 21771 : 2014
|
GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - CONCEPTS AND GEOMETRY (ISO 21771:2007) |
|
AGMA ISO 10064-5 : A
|
CODE OF INSPECTION PRACTICE - PART 5: RECOMMENDATIONS RELATIVE TO EVALUATION OF GEAR MEASURING INSTRUMENTS |
|
AGMA ISO 18653 : A
|
GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF INDIVIDUAL GEARS |
|
BS ISO 14635-1 : 2000
|
GEARS - FZG TEST PROCEDURES - PART 1: FZG TEST METHOD A/8, 3/90 FOR RELATIVE SCRUFFING LOAD-CARRYING CAPACITY OF OILS |
|
DIN ISO 14635-3 : 2011
|
GEARS - FZG TEST PROCEDURES - PART 3: FZG TEST METHOD A/2,8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES |
|
BS ISO 9085 : 2002
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - APPLICATION FOR INDUSTRIAL GEARS |
|
ISO TS 6336-21 : 2017
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 21: CALCULATION OF SCUFFING LOAD CAPACITY (ALSO APPLICABLE TO BEVEL AND HYPOID GEARS) - INTEGRAL TEMPERATURE METHOD |
|
05/30128083 DC : DRAFT JAN 2005
|
BEVEL GEARS - ISO SYSTEM OF ACCURACY |
|
BS EN 61400-4 : 2013
|
WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
|
VDI/VDE 2610 : 2014 COR 1 2015
|
EXCHANGE FORMAT FOR GEAR DATA - GEAR DATA EXCHANGE FORMAT (GDE FORMAT) - DEFINITION |
|
BS PD ISO/TS 6336-21 : 2017
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 21: CALCULATION OF SCUFFING LOAD CAPACITY (ALSO APPLICABLE TO BEVEL AND HYPOID GEARS) - INTEGRAL TEMPERATURE METHOD |
|
04/30126837 DC : DRAFT DEC 2004
|
BS ISO 6336-1 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 1: BASIC PRINCIPLES, INTRODUCTION AND GENERAL INFLUENCE FACTORS |
|
BS ISO 6336-2 : 2006
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING) |
|
DIN ISO 14635-2 E : 2010
|
GEARS - FZG TEST PROCEDURES - PART 2: FZG STEP LOAD TEST A10/16, 6R/120 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY OF HIGH EP OILS |
|
ISO 9084 : 2000
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - APPLICATION TO HIGH SPEED GEARS AND GEARS OF SIMILAR REQUIREMENTS |
|
I.S. EN 61400-4:2013
|
WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
|
BS ISO 21771 : 2007
|
GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - CONCEPTS AND GEOMETRY |
|
BS ISO 9083 : 2001
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - APPLICATION TO MARINE GEARS |
|
ISO TR 10064-5 : 2005
|
CODE OF INSPECTION PRACTICE - PART 5: RECOMMENDATIONS RELATIVE TO EVALUATION OF GEAR MEASURING INSTRUMENTS |
|
VDI/VDE 2608 : 2001
|
TANGENTIAL COMPOSITE AND RADIAL COMPOSITE INSPECTION OF CYLINDRICAL GEARS, BEVEL GEARS, WORMS AND WORM WHEELS |
|
VDI/VDE 2613 : 2003
|
PITCH AND RUNOUT TESTING ON GEARINGS - CYLINDRICAL GEARS, WORMWHEELS, BEVEL GEARS |
|
DIN 21772 : 2012
|
GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - DEFINITION OF DEVIATIONS |
|
BS ISO 8579-1 : 2002
|
ACCEPTANCE CODE FOR GEAR UNITS - PART 1: TEST CODE FOR AIRBORNE SOUND |
|
BS ISO 17485 : 2006
|
BEVEL GEARS - ISO SYSTEM OF ACCURACY |
|
ISO TR 10064-1 : 2017
|
CODE OF INSPECTION PRACTICE - PART 1: MEASUREMENT OF CYLINDRICAL GEAR TOOTH FLANKS |
|
11/30210938 DC : 0
|
BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
|
04/30112988 DC : DRAFT APR 2004
|
ISO 14635-3 - GEARS - FZG TEST PROCEDURES - FZG TEST METHOD A/2.8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES |
|
BS PD ISO/TR 15144-1 : 2014
|
CALCULATION OF MICRO-PITTING LOAD CAPACITY OF CYLINDRICAL SPUR AND HELICAL GEARS - PART 1: INTRODUCTION AND BASIC PRINCIPLES |
|
BS ISO 14635-3 : 2005
|
GEARS - FZG TEST PROCEDURES - PART 3: FZG TEST METHOD A/2,8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES |
|
05/30107533 DC : DRAFT JUL 2005
|
ISO 10303-224 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224: APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES |
|
VDI/VDE 2612-5 : 2015
|
MEASUREMENT AND TESTING OF GEARINGS - SURFACE ROUGHNESS MEASUREMENT OF CYLINDRICAL GEARS AND BEVEL GEARS BY MEANS OF STYLUS-TYPE INSTRUMENTS |
|
API 677 : 2006 : R2016
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
DIN ISO 18653 : 2009
|
GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF INDIVIDUAL GEARS |
|
VDI/VDE 2607 : 2000
|
COMPUTER-AIDED EVALUATION OF PROFILE AND HELIX MEASUREMENTS ON CYLINDRICAL GEARS WITH INVOLUTE PROFILE |
|
API 674 REDLINE : 2010
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
BS ISO/TR 10064-4 : 1998
|
CODE OF INSPECTION PRACTICE - PART 4: RECOMMENDATIONS RELATIVE TO SURFACE TEXTURE AND TOOTH CONTACT PATTERN CHECKING |
|
BS PD ISO/TR 10064-1 : 2017
|
CODE OF INSPECTION PRACTICE - PART 1: MEASUREMENT OF CYLINDRICAL GEAR TOOTH FLANKS |
|
15/30269176 DC : 0
|
BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
|
04/30114086 DC : DRAFT JUL 2004
|
EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE) |
|
DIN ISO 14635-1 E : 2006
|
GEARS - FZG TEST PROCEDURES - PART 1: FZG TEST METHOD A/8, 3/90 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY OF OILS |
|
DIN ISO 14635-1 : 2006
|
GEARS - FZG TEST PROCEDURES - PART 1: FZG TEST METHOD A/8,3/90 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY OF OILS |
|
03/314803 DC : DRAFT SEP 2003
|
ISO 6336-2 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING) |
|
BS ISO 10972-1 : 1998
|
CRANES - REQUIREMENTS FOR MECHANISMS - GENERAL |
|
03/314804 DC : DRAFT SEP 2003
|
BS ISO 6336-3 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH |
|
API 675 : 2012
|
POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
DIN 3970 : 2010
|
MASTER GEARS FOR CHECKING CYLINDRICAL GEARS - GEAR BLANKS AND GEARING |
|
04/30112626 DC : DRAFT APR 2004
|
ISO 21771 - GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - CONCEPTS AND GEOMETRY |
|
DIN 3970 E : 2010
|
MASTER GEARS FOR CHECKING CYLINDRICAL GEARS - GEAR BLANKS AND GEARING |
|
BS 436-5(1997) : 1997
|
SPUR AND HELICAL GEARS - DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITE DEVIATIONS AND RUNOUT INFORMATION |
|
ISO 23509 : 2016
|
BEVEL AND HYPOID GEAR GEOMETRY |
|
API 674 : 2010 : INC : ERR 1 : 2015 : R2016
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
10/30227442 DC : 0
|
BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
|
BS ISO 6336-3 : 2006
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH |
|
DIN ISO 21771 E : 2014
|
GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - CONCEPTS AND GEOMETRY (ISO 21771:2007) |
|
BS ISO 6336-5 : 2016
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
|
BS ISO TR 10064-2 : 1996
|
CYLINDRICAL GEARS - CODE OF INSPECTION PRACTICE - PART 2: INSPECTION RELATED TO RADIAL COMPOSITE DEVIATIONS, RUNOUT, TOOTH THICKNESS AND BACKLASH |
|
BS ISO 23509 : 2016
|
BEVEL AND HYPOID GEAR GEOMETRY |
|
02/707905 DC : DRAFT JUN 2002
|
ISO/DIS 18653 - GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF GEARS |
|
BS ISO TR 10064-3 : 1996
|
CODE OF INSPECTION PRACTICE - PART 3: RECOMMENDATIONS RELATIVE TO GEAR BLANKS, SHAFT CENTRE DISTANCE AND PARALLELISM OF AXES |
|
BS PD ISO/TR 6336-30 : 2017
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 30: CALCULATION EXAMPLES FOR THE APPLICATION OF ISO 6336 PARTS 1,2,3,5 |
|
BS ISO 14661 : 2000
|
THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
|
API 677 : 2006
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
BS ISO 81400-4 : 2005
|
WIND TURBINES - PART 4: DESIGN AND SPECIFICATION OF GEARBOXES |
|
API 674 : 2010(R2016)
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
BS ISO/TR 13989-1 : 2000
|
CALCULATION OF SCUFFING LOAD CAPACITY OF CYLINDRICAL, BEVEL AND HYPOID GEARS - PART 1: FLASH TEMPERATURE METHOD |
|
VDI/VDE 2612 : 2000
|
PROFILE AND HELIX CHECKING OF INVOLUTE CYLINDRICAL GEARS |
|
BS ISO 4156-3 : 2005
|
STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION |
|
ISO TS 6336-20 : 2017
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 20: CALCULATION OF SCUFFING LOAD CAPACITY (ALSO APPLICABLE TO BEVEL AND HYPOID GEARS) - FLASH TEMPERATURE METHOD |
|
AGMA 2015-1 : A
|
ACCURACY CLASSIFICATION SYSTEM - TANGENTIAL MEASUREMENTS FOR CYLINDRICAL GEARS |
|
BS ISO 9084 : 2000
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - APPLICATION TO HIGH SPEED GEARS AND GEARS OF SIMILAR REQUIREMENTS |
|
API 677 : 2006 : R2010
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
AGMA ISO 1328 2 : 1999
|
CYLINDRICAL GEARS - ISO SYSTEM OF ACCURACY - PART 2: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITE DEVIATIONS AND RUNOUT INFORMATION |
|
ISO 6336-3 : 2006
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH |
|
BS ISO/TR 13989-2 : 2000
|
CALCULATION OF SCUFFING LOAD CAPACITY OF CYLINDRICAL, BEVEL AND HYPOID GEARS - PART 2: INTEGRAL TEMPERATURE METHOD |
|
BS ISO 18653 : 2003
|
GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF INDIVIDUAL GEARS |
|
BS PD ISO/TR 10064-5 : 2005
|
CODE OF INSPECTION PRACTICE - PART 5: RECOMMENDATIONS RELATIVE TO EVALUATION OF GEAR MEASURING INSTRUMENTS |
|
BS ISO 6336-1 : 2006
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 1: BASIC PRINCIPLES, INTRODUCTION AND GENERAL INFLUENCE FACTORS |
|
ISO 9083 : 2001(R2017)
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - APPLICATION TO MARINE GEARS |
|
ISO TR 6336-30 : 2017
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 30: CALCULATION EXAMPLES FOR THE APPLICATION OF ISO 6336 PARTS 1,2,3,5 |
|
API 619 : 2010
|
ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
|
DIN ISO 18653 E : 2009
|
GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF INDIVIDUAL GEARS |
|
API 672 : 2004
|
PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
DNV/GL-ST-0164 : LATEST
|
TIDAL TURBINES |
|
API 674 : 2010 : ERR 2 : 2015
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
API 677 : 2006
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
API 619 REDLINE : 2010
|
ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
|
API 674 : 2010
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
API 674 : 2010 : ERR 1 : 2014
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
ISO 4156-3 : 2005(R2015)
|
STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION |
|
AGMA ISO 17485 : A
|
BEVEL GEARS - ISO SYSTEM OF ACCURACY |
|
ISO 6336-2 : 2006(R2006)
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING) |
|
ISO TR 10064-2 : 1996(R2012)
|
CYLINDRICAL GEARS - CODE OF INSPECTION PRACTICE - PART 2: INSPECTION RELATED TO RADIAL COMPOSITE DEVIATIONS, RUNOUT, TOOTH THICKNESS AND BACKLASH |
|
ISO 10303-224 : 2006
|
INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224 - APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES |
|
ISO 6336-1 : 2006(R2010)
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 1: BASIC PRINCIPLES, INTRODUCTION AND GENERAL INFLUENCE FACTORS |
|
ISO 6336-5 : 2016
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
|
ISO 81400-4 : 2005
|
WIND TURBINES - PART 4: DESIGN AND SPECIFICATION OF GEARBOXES |
|
DIN ISO 14635-3 E : 2011
|
GEARS - FZG TEST PROCEDURES - PART 3: FZG TEST METHOD A/2,8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES (ISO 14635-3:2005) |
|
ISO TR 13989-2 : 2000
|
CALCULATION OF SCUFFING LOAD CAPACITY OF CYLINDRICAL, BEVEL AND HYPOID GEARS - PART 2 - INTEGRAL TEMPERATURE METHOD |
|
ISO TR 10064-3 : 1996(R2012)
|
CODE OF INSPECTION PRACTICE - PART 3: RECOMMENDATIONS RELATIVE TO GEAR BLANKS, SHAFT CENTRE DISTANCE AND PARALLELISM OF AXES |
|
ISO 14661 : 2000
|
THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
|
ISO TR 15144-1 : 2014
|
CALCULATION OF MICROPITTING LOAD CAPACITY OF CYLINDRICAL SPUR AND HELICAL GEARS - PART 1: INTRODUCTION AND BASIC PRINCIPLES |
|
ISO 21771 : 2007(R2016)
|
GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - CONCEPTS AND GEOMETRY |
|
ISO 8579-1 : 2002(R2019)
|
ACCEPTANCE CODE FOR GEAR UNITS - PART 1: TEST CODE FOR AIRBORNE SOUND |
|
IEC 61400-4 : 1ED 2012
|
WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
|
BS ISO 13691 : 2001 AMD 14307
|
PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
|
BS EN ISO 13691 : 2002
|
PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
|
BS EN ISO 10440-1 : 2001
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
|
ISO 14635-1 : 2000(R2017)
|
GEARS - FZG TEST PROCEDURES - PART 1: FZG TEST METHOD A/8, 3/90 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY OF OILS |
|
ISO 14635-2 : 2004(R2016)
|
GEARS - FZG TEST PROCEDURES - PART 2: FZG STEP LOAD TEST A10/16, 6R/120 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY OF HIGH EP OILS |
|
ISO 14635-3 : 2005(R2017)
|
GEARS - FZG TEST PROCEDURES - PART 3: FZG TEST METHOD A/2,8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES |
|
ISO 9085 : 2002(R2017)
|
CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - APPLICATION FOR INDUSTRIAL GEARS |
|
ISO 18653 : 2003(R2015)
|
GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF INDIVIDUAL GEARS |
|
ISO 13710 : 2004(R2007)
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
|
UNE EN 61400-4 : 2013
|
WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
|
BS EN ISO 13710 : 2004
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
|
ISO 13691 : 2001(R2017)
|
PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
|
ISO 10440-1 : 2007(R2017)
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
|
ISO 17485 : 2006(R2015)
|
BEVEL GEARS - ISO SYSTEM OF ACCURACY |