• There are no items in your cart

ISO 13373-2:2016

Current
Current

The latest, up-to-date edition.

Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

01-12-2016

ISO 13373-2:2016 recommends procedures for processing and presenting vibration data and analyzing vibration signatures for the purpose of monitoring the vibration condition of rotating machinery, and performing diagnostics as appropriate. Different techniques are described for different applications. Signal enhancement techniques and analysis methods used for the investigation of particular machine dynamic phenomena are included. Many of these techniques can be applied to other machine types, including reciprocating machines. Example formats for the parameters that are commonly plotted for evaluation and diagnostic purposes are also given.

ISO 13373-2:2016 is divided essentially into two basic approaches when analysing vibration signals: the time domain and the frequency domain. Some approaches to the refinement of diagnostic results, by changing the operational conditions, are also covered.

ISO 13373-2:2016 includes only the most commonly used techniques for the vibration condition monitoring, analysis and diagnostics of machines. There are many other techniques used to determine the behaviour of machines that apply to more indepth vibration analysis and diagnostic investigations beyond the normal followon to machinery condition monitoring. A detailed description of these techniques is beyond the scope of ISO 13373-2:2016, but some of these more advanced special purpose techniques are listed in Clause 5 for additional information.

For specific machine types and sizes, the ISO 7919 and ISO 10816 series provide guidance for the application of broadband vibration magnitudes for condition monitoring, and other documents such as VDI 3839 provide additional information about machineryspecific problems that can be detected when conducting vibration diagnostics.

DevelopmentNote
Supersedes ISO/DIS 13373-2. (01/2016)
DocumentType
Standard
Pages
34
PublisherName
International Organization for Standardization
Status
Current
Supersedes

15/30297073 DC : 0 BS ISO 13373-9 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 9: DIAGNOSTIC TECHNIQUES FOR ELECTRIC MOTORS
DIN ISO 10816-7:2009-08 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 7: ROTODYNAMIC PUMPS FOR INDUSTRIAL APPLICATIONS, INCLUDING MEASUREMENTS ON ROTATING SHAFTS
ISO/TR 17243-2:2017 Machine tool spindles Evaluation of spindle vibrations by measurements on non-rotating parts Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
DIN ISO 10816-21 E : 2015 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX (ISO 10816-21:2015)
DIN ISO 13373-3 E : 2015 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS (ISO 133733:2015)
UNI ISO 10816-4 : 2010 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
PD ISO/TR 17243-1:2014 Machine tool spindles. Evaluation of machine tool spindle vibrations by measurements on spindle housing Spindles with rolling element bearings and integral drives operating at speeds between 600 min$u-<sup>1</sup> and 30 000 min$u-<sup>1</sup>
ISO/TR 230-8:2010 Test code for machine tools Part 8: Vibrations
BS ISO 7919-3 : 2009 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 3: COUPLED INDUSTRIAL MACHINES
PD ISO/TR 17243-2:2017 Machine tool spindles. Evaluation of spindle vibrations by measurements on non-rotating parts Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
09/30192810 DC : DRAFT JAN 2009 BS ISO 10816-2 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN
ISO 7919-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
IEC TS 60034-32:2016 Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings
BS ISO 10816-4 : 2009 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
16/30341593 DC : 0 BS ISO 10816-3 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU
BS ISO 10816-7:2009 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Rotodynamic pumps for industrial applications, including measurements on rotating shafts
09/30190941 DC : DRAFT JAN 2009 BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
BS ISO 13373-9:2017 Condition monitoring and diagnostics of machines. Vibration condition monitoring Diagnostic techniques for electric motors
DIN ISO 13373-3:2015-12 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS (ISO 13373-3:2015)
BS ISO 10816-8:2014 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Reciprocating compressor systems
08/30184178 DC : DRAFT JUNE 2008 BS EN 61400-25-6 - WIND TURBINES - PART 25-6: COMMUNICATIONS FOR MONITORING AND CONTROL OF WIND POWER PLANTS - LOGICAL NODE CLASSES AND DATA CLASSES FOR CONDITION MONITORING
14/30297061 DC : 0 BS ISO 13373-3 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS
12/30264446 DC : 0 BS ISO 10816-8 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS
BS ISO 10816-3 : 2009 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU
ISO 10816-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
VDI 3839 Blatt 6:2007-10 Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with machine sets in hydraulic power stations
VDI 3836:2012-02 Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers - Addition to DIN ISO 10816-3
VDI 4550 Blatt 1:2017-04 Vibration analysis - Procedures and presentation of results - Terminology and basic principles
UNE-ISO/TR 230-8:2012 Test code for machine tools -- Part 8: Vibrations
DIN ISO 10816-8 E : 2014 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS (ISO 10816-8:2014)
BS ISO 13373-7:2017 Condition monitoring and diagnostics of machines. Vibration condition monitoring Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
16/30341590 DC : 0 BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
DIN ISO 10816-21:2015-08 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX (ISO 10816-21:2015)
BS ISO 7919-2:2009 Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
BS ISO 10816-21:2015 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Horizontal axis wind turbines with gearbox
09/30192807 DC : DRAFT FEB 2009 BS ISO 7919-2 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN
PD ISO/TR 19201:2013 Mechanical vibration. Methodology for selecting appropriate machinery vibration standards
14/30265061 DC : 0 BS ISO 10816-21 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX
ISO 10816-7:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
ISO 13373-9:2017 Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors
ISO 7919-3:2009 Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines
ISO 13373-3:2015 Condition monitoring and diagnostics of machines Vibration condition monitoring Part 3: Guidelines for vibration diagnosis
PD ISO/TR 230-8:2010 Test code for machine tools Vibrations
DIN ISO 7919-2:2010-06 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN
UNI ISO 7919-4 : 2010 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
03/306196 DC : DRAFT APR 2003 ISO 19860 - GAS TURBINES - DATA ACQUISITION AND TREND MONITORING SYSTEM REQUIREMENTS FOR GAS TURBINE INSTALLATIONS
BS ISO 13373-3:2015 Condition monitoring and diagnostics of machines. Vibration condition monitoring Guidelines for vibration diagnosis
16/30341596 DC : 0 BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
UNI ISO 10816-2 : 2010 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN
09/30190938 DC : DRAFT JAN 2009 BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
ISO 19860:2005 Gas turbines — Data acquisition and trend monitoring system requirements for gas turbine installations
ISO 10816-8:2014 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 8: Reciprocating compressor systems
ISO/TR 17243-1:2014 Machine tool spindles Evaluation of machine tool spindle vibrations by measurements on spindle housing Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1
ISO 10816-21:2015 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 21: Horizontal axis wind turbines with gearbox
ISO 7919-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings
16/30334059 DC : 0 BS ISO 13373-7 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 7: DIAGNOSTIC TECHNIQUES FOR MACHINE SETS IN HYDRAULIC POWER GENERATING AND PUMP-STORAGE PLANTS
16/30341587 DC : 0 BS ISO 7919-3 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 3: COUPLED INDUSTRIAL MACHINES
DIN ISO 10816-8:2014-11 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS (ISO 10816-8:2014)
BS ISO 10816-2:2009 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
ISO 13373-7:2017 Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
PD IEC/TS 60034-32:2016 Rotating electrical machines Measurement of stator end-winding vibration at form-wound windings
BS ISO 7919-4 : 2009 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
API 691 : 2017 RISK-BASED MACHINERY MANAGEMENT
ISO/TR 19201:2013 Mechanical vibration Methodology for selecting appropriate machinery vibration standards
UNI ISO 7919-2 : 2010 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN
ISO 10816-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings
IEC TS 62600-2:2016 Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems
DIN ISO 10816-2:2010-06 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN

ISO 16063-21:2003 Methods for the calibration of vibration and shock transducers Part 21: Vibration calibration by comparison to a reference transducer
VDI 3839 Blatt 1:2001-03 Instructions on measuring and interpreting the vibrations of machines - General principles
ISO 2041:2009 Mechanical vibration, shock and condition monitoring Vocabulary
ISO 13372:2004 Condition monitoring and diagnostics of machines Vocabulary
ISO 1683:2015 Acoustics Preferred reference values for acoustical and vibratory levels
ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
ISO 10817-1:1998 Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration
ISO 5348:1998 Mechanical vibration and shock Mechanical mounting of accelerometers

View more information
US$175.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.