• There are no items in your cart

ISO 13577-1:2016

Current
Current

The latest, up-to-date edition.

Industrial furnaces and associated processing equipment Safety Part 1: General requirements
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

09-05-2016

ISO 13577-1:2016 the general safety requirements common to industrial furnaces and associated processing equipment (TPE).

ISO 13577-1:2016 deals with the significant hazards, hazardous situations or hazardous events relevant to TPE, as listed in Annex A, when TPE is used as intended and also under conditions of misuse that are reasonably foreseeable by the manufacturer.

Annex B provides a list of common industrial furnaces and associated processing equipment.

This document specifies the requirements intended to be met by the manufacturer to ensure the safety of persons and property during commissioning, start-up, operation, shut-down, maintenance periods and dismantling, as well as in the event of foreseeable faults or malfunctions that can occur in the equipment.

These general safety requirements apply to all TPE, unless an exception is given in other parts of ISO 13577 dealing with specific equipment. The provisions of other parts of ISO 13577 that directly apply to specific types of TPE take precedence over the provisions of this document.

ISO 13577-1:2016 is not applicable to blast furnaces, converters (in steel plants), boilers or equipment not covered under ISO 12100.

DevelopmentNote
Supersedes ISO/DIS 13577-1. (09/2016)
DocumentType
Standard
Pages
45
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
BS ISO 13577-1:2016 Identical
SAC GB/T 37752.1:2019 Identical
NEN ISO 13577-1 : 2012 Identical

BS EN 60519-12:2013 Safety in electroheating installations Particular requirements for infrared electroheating installations
BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
BS ISO 13577-3:2016 Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases
14/30283312 DC : 0 BS ISO 13577-3 - INDUSTRIAL FURNACE AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 3: GENERATION AND USE OF PROTECTIVE AND REACTIVE ATMOSPHERE GASES
ISO 13577-3:2016 Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases
I.S. EN 60519-12:2013 SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS (IEC 60519-12:2013 (EQV))
CEI EN 60519-1 : 2016 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
I.S. EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
CEI EN 60519-12 : 2014 SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS
IEC 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
13/30277685 DC : 0 BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
BS ISO 13577-2:2014 Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems
13/30271339 DC : 0 BS ISO 13577-4 - INDUSTRIAL FURNACE AND ASSOCIATED PROCESSING EQUIPEMENT - SAFETY - PART 4: PROTECTIVE SYSTEMS
ISO 13577-2:2014 Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems

ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
IEC 60364-4-43:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
2006/95/EC : 2006 DIRECTIVE 2006/1995/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 12 DECEMBER 2006 ON THE HARMONISATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS (CODIFIED VERSION) (TEXT WITH EEA RELEVANCE)
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 7243:2017 Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index
EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
ISO 13577-2:2014 Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
2004/108/EC : 2004 DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
ISO 14123-1:2015 Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
ISO 13574:2015 Industrial furnaces and associated processing equipment — Vocabulary
ISO 11690-2:1996 Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 2: Noise control measures
ISO 11429:1996 Ergonomics System of auditory and visual danger and information signals
IEC 60364-4-44:2007+AMD1:2015 CSV Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
ISO 7933:2004 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
ISO 15534-1:2000 Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
EN 1547:2001+A1:2009 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
IEC 62598:2011 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
CGA G 4.4 : 2012 OXYGEN PIPELINE AND PIPING SYSTEMS
CGA G 4.1 : 2009 CLEANING EQUIPMENT FOR OXYGEN SERVICE
ISO 15534-2:2000 Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
ISO 13577-4:2014 Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems
ISO 14123-2:2015 Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES

View more information
US$201.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.