ISO 15711:2003
Current
Current
The latest, up-to-date edition.
Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
05-26-2003
ISO 15711:2003 describes two methods for determining the ability of paint, or other organic coatings, applied to metallic substrates to withstand cathodic disbonding when the surface coating may contain or develop discontinuities. The methods are applicable to coatings that are exposed to sea water, such as those applied to ships or marine structures. They are not suitable for the assessment of the ability of coatings to withstand cathodic disbonding on land-based structures.
Method A involves the use of a cathodic protection circuit, whereby the electrode potential of the test substrates is controlled potentiostatically.
Method B involves the use of sacrificial anodes attached to the test substrates. This reflects the practical method of cathodic protection commonly used on ships.
| DevelopmentNote |
Supersedes ISO/DIS 15711 (05/2003)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN ISO 15711:2006 | Identical |
| NBN EN ISO 15711 : 2005 | Identical |
| NF EN ISO 15711 : 2005 | Identical |
| NEN EN ISO 15711 : 2005 | Identical |
| NS EN ISO 15711 : 1ED 2005 | Identical |
| I.S. EN ISO 15711:2005 | Identical |
| PN EN ISO 15711 : 2006 | Identical |
| SN EN ISO 15711 : 2005 | Identical |
| UNI EN ISO 15711 : 2005 | Identical |
| SS-EN ISO 15711 : 2005 | Identical |
| BS EN ISO 15711:2004 | Identical |
| EN ISO 15711:2004 | Identical |
| UNE-EN ISO 15711:2004 | Identical |
| DIN EN ISO 15711:2005-03 | Identical |
| I.S. EN ISO 2812-2:2007 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
| ISO/TS 19392-3:2018 | Paints and varnishes Coating systems for wind-turbine rotor blades Part 3: Determination and evaluation of resistance to rain erosion using water jet |
| I.S. EN ISO 17463:2014 | PAINTS AND VARNISHES - GUIDELINES FOR THE DETERMINATION OF ANTICORROSIVE PROPERTIES OF ORGANIC COATINGS BY ACCELERATED CYCLIC ELECTROCHEMICAL TECHNIQUE (ISO 17463:2014) |
| EN ISO 12944-9:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018) |
| DIN EN ISO 17463 E : 2014 | PAINTS AND VARNISHES - GUIDELINES FOR THE DETERMINATION OF ANTICORROSIVE PROPERTIES OF ORGANIC COATINGS BY ACCELERATED CYCLIC ELECTROCHEMICAL TECHNIQUE (ISO 17463:2014) |
| 16/30337293 DC : 0 | BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
| I.S. EN ISO 12736:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| EN ISO 2812-2:2007 | Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2007) |
| I.S. EN ISO 4628-8:2012 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
| 11/30187339 DC : 0 | BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES |
| DIN EN ISO 2812-2:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
| ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
| BS EN ISO 17463:2014 | Paints and varnishes. Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique |
| 17/30344544 DC : 0 | BS EN ISO 2812-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
| DIN EN ISO 4628-8:2013-03 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
| UNE-EN ISO 4628-8:2013 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
| UNI EN ISO 4628-8 : 2013 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT |
| EN ISO 4628-8:2012 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
| BS EN ISO 12736:2014 | Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| NACE TM 01 12 : 2012 | TEST TO DETERMINE THE POTENTIAL CORROSION EFFECTS OF BALLAST WATER TREATMENT SYSTEMS ON BALLAST TANKS |
| ISO 12944-9:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures |
| ISO/TS 19392-2:2018 | Paints and varnishes Coating systems for wind-turbine rotor blades Part 2: Determination and evaluation of resistance to rain erosion using rotating arm |
| BS EN ISO 2812-2:2007 | Paints and varnishes. Determination of resistance to liquids Water immersion method |
| EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
| I.S. EN ISO 12944-9:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018) |
| ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
| ISO 17463:2014 | Paints and varnishes Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique |
| BS EN ISO 4628-8:2012 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| ISO 12736:2014 | Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| EN ISO 12736:2014 | Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
| EN ISO 17463:2014 | Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014) |
| UNI EN ISO 17463 : 2014 | PAINTS AND VARNISHES - GUIDELINES FOR THE DETERMINATION OF ANTICORROSIVE PROPERTIES OF ORGANIC COATINGS BY ACCELERATED CYCLIC ELECTROCHEMICAL TECHNIQUE |
| DIN EN ISO 17463:2014-11 | Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014) |
| 13/30252542 DC : 0 | BS EN ISO 17463 - PAINTS AND VARNISHES - DETERMINATION OF THE CORROSION PROTECTION PROPERTIES OF ORGANIC COATINGS BY THE ACCELERATED CYCLIC ELECTROCHEMICAL TECHNIQUE (ACET) |
| AEP-61 : 2009 | PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS |
| UNE-EN ISO 17463:2014 | Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014) |
| ONORM EN ISO 12736 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
US$111.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.