• There are no items in your cart

ISO 16030:2001

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Pneumatic fluid power — Connections — Ports and stud ends
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

07-15-2022

Published date

12-20-2001

This International Standard specifies dimensions and performance requirements for ports and stud ends with

parallel threads for pneumatic fluid power applications.

It specifies reusable, positively retained seals for leak-free connections, for use at pressures from ? 0,09 MPa

(? 0,9 bar 1)) up to 1,6 MPa (16 bar).

Only this International Standard is applicable for threaded ports and stud ends specified in new designs in

pneumatic fluid power applications.

Ports and stud ends conforming to this International Standard are not intended to connect with ports and stud ends

that conform to ISO 1179 or threads that conform to ISO 7-1.

DevelopmentNote
Supersedes ISO/FDIS 16030 (12/2001)
DocumentType
Standard
Pages
13
PublisherName
International Organization for Standardization
Status
Superseded
SupersededBy

Standards Relationship
NEN ISO 16030 : 2002 AMD 1 2005 Identical
BS ISO 16030:2001 Identical
DIN ISO 16030:2007-05 Identical
NF ISO 16030 : 2005 Identical
SN ISO 16030 : 2001 Identical

12/30260519 DC : 0 BS EN ISO 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO/DIS 1179-1:2012)
UNE-EN ISO 1179-1:2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
09/30199986 DC : 0 BS ISO 15524 - PNEUMATIC FLUID POWER - SINGLE ROD SHORT STROKE CYLINDERS
BS EN ISO 1179-4:2008 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Stud ends for general use only with metal-to-metal sealing (type B)
01/714184 DC : DRAFT OCT 2001 ISO/DIS 15552 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - BASIC, MOUNTING AND ACCESSORIES DIMENSIONS
08/30176283 DC : DRAFT JAN 2008 BS ISO 6358-2 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 2: GENERAL RULES
BS EN ISO 1179-3:2008 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
01/714272 DC : 0 ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
02/712438 DC : DRAFT OCT 2002 ISO/DIS 21287 - PNEUMATIC FLUID POWER - CYLINDERS - COMPACT CYLINDERS, 1000 KPA (10 BAR) SERIES, BORES FROM 20 MM TO 100 MM
ISO 14743:2004 Pneumatic fluid power Push-in connectors for thermoplastic tubes
I.S. EN ISO 1179-2:2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
DIN ISO 21287:2005-12 Pneumatic fluid power - Cylinders - Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm (ISO 21287:2004)
BS ISO 6301-1:2017 Pneumatic fluid power. Compressed-air lubricators Main characteristics to be included in supplier\'s literature and product-marking requirements
01/714274 DC : 0 ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
BS EN ISO 1179-1:2013 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Threaded ports
05/30135258 DC : DRAFT JUN 2005 ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS AND ELASTOMERIC SEALING (TYPE E)
05/30135256 DC : DRAFT JUN 2005 ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
17/30366640 DC : 0 BS ISO 14743 - PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES
DIN EN ISO 1179-1:2014-03 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
I.S. EN ISO 1179-4:2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
I.S. EN ISO 1179-1:2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO 1179-1:2013)
ISO 6953-1:2015 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
07/30165998 DC : 0 BS ISO 6301-1 - PNEUMATIC FLUID POWER - COMPRESSED-AIR LUBRICATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER'S LITERATURE AND PRODUCT-MARKING REQUIREMENTS
01/714275 DC : 0 ISO/DIS 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
ISO 6301-1:2017 Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
16/30339102 DC : 0 BS ISO 6301-1 - PNEUMATIC FLUID POWER - COMPRESSED-AIR LUBRICATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER'S LITERATURE AND PRODUCT-MARKING REQUIREMENTS
BS ISO 14743:2004 Pneumatic fluid power. Push-in connectors for thermoplastic tubes
BS EN ISO 1179-2:2013 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
05/30135263 DC : DRAFT JUN 2005 ISO 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
14/30291030 DC : 0 BS ISO 6432 - PNEUMATIC FLUID POWER - SINGLE ROD CYLINDERS, 1000 KPA (10 BAR) SERIES, BORES FROM 8 TO 25 MM - BASIC AND MOUNTING DIMENSIONS
BS ISO 15524:2011 Pneumatic fluid power. Cylinders. Single-rod short-stroke cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
UNI EN ISO 1179-4 : 2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
ISO 6358-1:2013 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow
ISO 15524:2011 Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm
UNI EN ISO 1179-3 : 2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
ISO 15552:2018 Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions
ISO 6432:2015 Pneumatic fluid power Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm Basic and mounting dimensions
ISO 21287:2004 Pneumatic fluid power — Cylinders — Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
BS ISO 6358-1:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids General rules and test methods for steady-state flow
BS ISO 21287:2004 Pneumatic fluid power. Cylinders. Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
BS ISO 6432:2015 Pneumatic fluid power. Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm. Basic and mounting dimensions
01/714273 DC : 0 ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
DIN EN ISO 1179-2:2014-03 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
UNE-EN ISO 1179-2:2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
ISO 1179-3:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
ISO 1179-1:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
EN ISO 1179-2:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
EN ISO 1179-1:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
EN ISO 1179-3:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
EN ISO 1179-4 : 2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
05/30125044 DC : DRAFT JAN 2005 ISO 19973-2 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 2: VALVES
BS ISO 6953-1:2015 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to be included in literature from suppliers and product-marking requirements
DIN EN ISO 1179-4:2008-08 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
13/30250847 DC : 0 BS ISO 6953-1 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS AND PRODUCT-MARKING REQUIREMENTS
12/30260523 DC : 0 BS EN ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD NDS WITH ELASTOMERIC SEALING (TYPE E) (ISO/DIS 1179-2:2012)
DIN EN ISO 1179-3:2008-08 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
BS ISO 5782-1:2017 Pneumatic fluid power. Compressed air filters Main characteristics to be included in supplier\'s literature and product-marking requirements
BS ISO 15552:2004 Pneumatic fluid power. Cylinders with detachable mountings, 1 000 kPa 10 bar series, bores from 32 mm to 320 mm. Basic, mounting and accessories dimensions
05/30135261 DC : DRAFT JUN 2005 ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
I.S. EN ISO 1179-3:2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
UNI EN ISO 1179-1 : 2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
UNI EN ISO 1179-2 : 2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
ISO 5782-1:2017 Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
ISO 1179-2:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
ISO 1179-4:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B)

ISO 272:1982 Fasteners — Hexagon products — Widths across flats
ISO 8778:2003 Pneumatic fluid power — Standard reference atmosphere
ISO 5598:2008 Fluid power systems and components Vocabulary
ISO 4759-1:2000 Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
ISO 1179:1981 Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications
ISO 7-2:2000 Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
ISO 14743:2004 Pneumatic fluid power Push-in connectors for thermoplastic tubes
ISO 261:1998 ISO general purpose metric screw threads General plan
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.