ISO 180:2000

Withdrawn

View Superseded by

Plastics Determination of Izod impact strength

Amended by

ISO 180:2000/Amd 1:2006

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

11-30-2019

Published date

12-14-2000

Publisher

International Organization for Standardization

DevelopmentNote	DRAFT ISO/DIS 180 is also available for this standard. (12/2016)
DocumentType	Standard
Pages	10
PublisherName	International Organization for Standardization
Status	Withdrawn
SupersededBy	ISO 180:2019
Supersedes	ISO 180:1993/Cor 1:1995 ISO 180:1993

Standards	Relationship
DS/EN ISO 180:2001	Identical
DS EN ISO 180 : 2001 AMD 2 2013	Identical
DIN EN ISO 180:2001-06	Identical
DIN EN ISO 180:2013-08	Identical
NF EN ISO 180 : 2001 AMD 2 2013	Identical
NBN EN 20287 : 1995	Identical
NBN EN ISO 180 : 2011 AMD 2 2013	Identical
NEN EN ISO 180 : 2001 AMD 2 2013	Identical
NS 9503 : 1ED 1985	Identical
NS EN ISO 180 : 2000 AMD 2 2013	Identical
I.S. EN ISO 180:2001	Identical
PN EN ISO 180 : 2004 AMD 2 2013	Identical
SN EN ISO 180 : 2001 AMD 2 2013	Identical
UNI EN ISO 180 : 2013	Identical
UNI ISO 180 : 1996	Identical
NF EN ISO 180:2001	Identical
NEN-EN-ISO 180:2001	Identical
SN EN ISO 180	Identical
PN-EN ISO 180:2004	Identical
SS-EN ISO 180 : 2000	Identical
BIS IS 13360-5-4 : 2013	Identical
UNE 53189-6:1974	Identical
UNE-EN ISO 180:2001	Identical
BS EN ISO 180 : 2001	Identical
EN ISO 180:2000/A2:2013	Identical
ONORM EN ISO 180 : 2013	Identical
BS EN ISO 180:2000+A2:2013	Identical

DIN EN ISO 25137-2 E : 2017	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
DIN 7744-1:1986-07	PLASTIC MOULDING MATERIALS; POLYCARBONATE (PC) THERMOPLASTICS; CLASSIFICATION AND DESIGNATION
BS EN 62841-3-9:2015	Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Particular requirements for transportable mitre saws
BS 2782-5 Method 552A:1981	Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
BS ISO 20753 : 2008	PLASTICS - TEST SPECIMENS
SAE J 1876 : 2012	PLASTIC DUST SHIELD FOR HYDRAULIC DISC BRAKES
I.S. EN 50405:2015	RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS
BS EN 4702-05:2017	Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer
PREN 845-1 : DRAFT 2012	SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
DIN EN 15345:2008-02	Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
I.S. EN 4702-05:2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER
ISO 4582:2017	Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
I.S. EN 62109-1:2010	SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN ISO 9093-2:2002	SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC
IEC 60893-2:2003	Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
I.S. EN 60950-1:2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
ISO 20557-2:2018	Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
I.S. EN 13565-1:2004	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
PREN 1825-1 : DRAFT 1995	INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
DIN EN ISO 20753 E : 2014	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
DIN EN ISO 25137-2:2016-08 (Draft)	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
DIN EN ISO 20753:2014-07	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ASTM D 5941 : 1996	Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998)
EN 60950-22:2017	Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
CSA C22.2 No. 62368-1 : 2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
DIN EN ISO 15103-2:2007-09	PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 8257-2 E : 2006	PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 13628-2:2006	Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
BS EN 13785 : 2005	REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
BS EN 15347:2007	Plastics. Recycled Plastics. Characterization of plastics waste
DIN EN 15342 E : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
BS EN 13786 : 2004	AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
ISO 15103-2:2007	Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 3167:2014	Plastics. Multipurpose test specimens
BS EN 60893-2:2004	Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test
BS EN ISO 2580-2:2003	Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 7391-2:2006	Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties
I.S. EN ISO 2580-2:2004	PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 16129:2013	Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
DIN EN ISO 8257-2:2006-06	PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 60730-1:2016	Automatic electrical controls - Part 1: General requirements
EN 12864:2001/A3:2009	LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
EN 60950-1:2006/A2:2013	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
EN 60893-2:2004	Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
OVE/ONORM EN 62282-4-101 : 2015	FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS (APU) - SAFETY OF ELECTRICALLY POWERED INDUSTRIAL TRUCKS (IEC 62282-4-101:2014)
ONORM B 5101 : 2013	SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - SUPPLEMENTARY REQUIREMENTS TO ONORM EN 858-1 AND -2
I.S. EN 4702-03:2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
I.S. EN ISO 12086-2:2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
SAE J 1639 : 1995(S2017)	CLASSIFICATION SYSTEM FOR AUTOMOTIVE POLYAMIDE (PA) PLASTICS
BS EN 16129:2013	Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
16/30341197 DC : 0	BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
CEI EN 62368-1 : 2016	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
I.S. EN 12864:2001	LOW-PRESSURE, NON-ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
BS 771-1:1980	Phenolic moulding materials Specification for physical properties (excluding type L2 material)
11/30237817 DC : 0	BS ISO 7076-2 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 2: LOW EXPANSION FOAM EQUIPMENT
BS ISO 13781:2017	Implants for surgery. Homopolymers, copolymers and blends on poly(lactide). In vitro degradation testing
ISO 13781:2017	Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing
05/30132990 DC : DRAFT APR 2005	ISO 20753 - PLASTICS - TEST SPECIMENS
UNE-EN ISO 9988-2:2015	Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
CAN/CSA-C22.2 NO. 60950-22:17	Information technology equipment - Safety - Part 22: Equipment to be installed outdoors (Binational standard with UL 60950-22)
PREN 16129 : DRAFT 2010	PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 100 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
11/30237814 DC : 0	BS ISO 7076-1 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 1: FOAM PROPORTIONING EQUIPMENT
BS EN 62841-3-1:2014	Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Particular requirements for transportable table saws
EN 15344:2007	Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
BS EN 13565-1 : 2003	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
BS EN 60286-6:2004	Packaging of components for automatic handling Bulk case packaging for surface mounting components
DIN ISO 11040-4 E : 2017	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
12/30265756 DC : 0	BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
EN 4702-05:2017	Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer
DEFSTAN 93-73/1(1994) : 1994	CELLULOSE ACETATE SHEET TYPES QXA, QXB AND X
DIN 16780-1:1988-01	PLASTIC MOULDING MATERIALS - THERMOPLASTIC MOULDING MATERIALS OF POLYMERIC BLENDS - CLASSIFICATION AND DESIGNATION
BS ISO 2897-2 : 1994 AMD 10661	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 7391-2 : 1996 AMD 10746	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 11040-4:2015	Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling
17/30347375 DC : 0	BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
BS ISO 8257-2:1990	Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties
API 17L1 : 2013	SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
UNI EN 15345 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
SAE J 1875 : 2001	MATERIALS FOR PLASTIC CHECK VALVES FOR VACUUM BOOSTER SYSTEMS
BIS IS 13252-22 : 2014	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
UL 60950-22:2ED 2017-03	Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors
ISO 19213:2017	Implants for surgery — Test methods of material for use as a cortical bone model
ONORM EN ISO 7391-2 : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 62841-3-9:2015/A11:2017	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 3-9: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE MITRE SAWS
UNE-EN ISO 25137-2:2017	Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
ASTM D 4066 : 2013	Standard Classification System for Nylon Injection and Extrusion Materials (PA)
CSA C22.2 No. 0.17 : 2000	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
NF EN 60950-1 : 2006 AMD 2 2014	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
ASTM D 4000 : 2016 : REDLINE	Standard Classification System for Specifying Plastic Materials
ASTM F 2026 : 2017 : REDLINE	Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
EN 13565-1:2003+A1:2007	Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
IEC 60730-1:2013+AMD1:2015 CSV	Automatic electrical controls - Part 1: General requirements
NSF 426 : 2017	ENVIRONMENTAL LEADERSHIP AND CORPORATE SOCIAL RESPONSIBILITY ASSESSMENT OF SERVERS
ISO 8606:1990	Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification
DIN EN 12864:2006-03	LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 15347:2008-02	Plastics - Recycled Plastics - Characterisation of plastics wastes
DIN EN 15347 E : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
DIN EN ISO 2580-2:2004-05	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 12864 E : 2006 AMD 3 2010	LOW PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
I.S. EN ISO 13628-2:2006	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN ISO 7391-2:2006-06	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 3167:2014	PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014)
I.S. EN 60893-2:2004	INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
I.S. EN ISO 8257-2:2006	PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 7748-2:1989-03	PLASTIC MOULDING MATERIALS; UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) MOULDING MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES
I.S. EN ISO 14663-2:2006	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 179-1:2010	PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
I.S. EN ISO 15103-2:2007	PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 16772-2:1988-12	PLASTIC MOULDING MATERIALS - ACRYLONITRILE BUTADIENE STYRENE (ABS) MOULDING MATERIALS - PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES
I.S. EN ISO 8256:2004	PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
I.S. EN ISO 13802:2015	PLASTICS - VERIFICATION OF PENDULUM IMPACT-TESTING MACHINES - CHARPY, IZOD AND TENSILE IMPACT-TESTING (ISO 13802:2015)
DIN EN 858-1:2002-05	CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
DIN 7741-2:1988-12	PLASTIC MOULDING MATERIALS; POLYSTYRENE (PS) MOULDING MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES
DIN 16771-2:1988-12	PLASTIC MOULDING MATERIALS; STYRENE/BUTADIENE (SB) MOULDING MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES
CSA C22.2 No. 62841-3-9 : 2016	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 3-9: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE MITRE SAWS
I.S. EN ISO 10366-2:2004	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 845-1:2013	SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
BIS IS 13252-1 : 2010 AMD 1 2013	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS 2782-5:Method 552A:1999	Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
BS 2782-9 Method 910A:1996	Methods of testing plastics. Sampling and test specimen preparation Injection moulding test specimens of thermoplastic materials
BS 3412:1992	Methods of specifying general purpose polyethylene materials for moulding and extrusion
BS 4936:1987	Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials
BS 1493:1987	Method of specifying general purpose polystyrene (PS) moulding and extrusion materials
BIS IS 13252 : 2003	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - GENERAL REQUIREMENTS
BS EN 50617-1:2015	Railway applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Track circuits
10/30228056 DC : 0
BS EN ISO 25137-2:2017	Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties
12/30258456 DC : 0	BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 4702-03:2017	Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking
10/30191247 DC : DRAFT APR 2010	BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
I.S. EN 62841-3-9:2015	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 3-9: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE MITRE SAWS
15/30297966 DC : 0	BS EN 60950-22/ED2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
13/30273499 DC : 0	BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
UNI EN 15347 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
API SPEC 17J : 2014	SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
CSA C22.2 No. 0.17 : 2000 : R2004	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
BS ISO 25137-2 : 2009	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
IEC 60950-22 REDLINE : 2ED 2016	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
15/30328314 DC : 0	BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
03/103069 DC : DRAFT JAN 2003
DIN EN ISO 9988-2 E : 2015	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
15/30320571 DC : 0	BS EN 60335-1 ED 5.0 /A2 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
BS 2782-3.354A&B(1991) : 1991 AMD 8635	METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF TENSILE-IMPACT STRENGTH
95/101288 DC : DRAFT FEB 1995	PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
UNE-EN 16129:2014	Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
12/30263853 DC : 0	BS EN 4702-03 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING
BS ISO 2580-2 : 94 AMD 10660	PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 5139:1974	Classification for polypropylene plastics materials for moulding and extrusion
EN 4702-03 : 2017	AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
02/120706 DC : DRAFT FEB 2002	BS EN ISO 8256 - PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
UNE-EN 50405:2016	Railway applications - Current collection systems - Pantographs, testing methods for contact strips
I.S. EN ISO 20753:2014	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
DIN 65498:1991-10	AEROSPACE; POLYETHERIMIDE (PEI) SEMI-FINISHED PRODUCTS AND MOULDED PARTS; TECHNICAL SPECIFICATION
UNI EN 15342 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
I.S. EN 62841-3-1:2014	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS (IEC 62841-3-1:2014, MODIFIED)
BS EN 50405 : 2015	RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS
I.S. EN ISO 25137-2:2017	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
BS EN ISO 20753:2014	Plastics. Test specimens
SAE J 2642 : 2017	RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS
ASTM D 4203 : 2017 : REDLINE	Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
ASTM D 5857 : 2017 : REDLINE	Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
ASTM D 5936 : 1996	Specification for Multipurpose Test Specimens (Withdrawn 1998)
DIN EN 13565-1:2016-08 (Draft)	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
EN ISO 7391-2:2006	Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
ISO 8605:2001	Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
IEC 62368-1:2014	Audio/video, information and communication technology equipment - Part 1: Safety requirements
I.S. EN 60286-6:2004	PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS
EN ISO 13628-2:2006/AC:2009	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN ISO 8256:2005-05	Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004
DIN EN ISO 6402-2:2004-05	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 13786:2010-07	AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 13785:2010-05	REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 15342:2008-02	Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
DIN EN 15344:2008-02	Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
BS EN ISO 12086-2:2006	Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 8256:2004	Plastics. Determination of tensile-impact strength
UNE-EN 62109-1:2011	Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements
DIN EN 15344 E : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
ISO 13802:2015	Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
CSA C22.2 No. 60950-1 :2007	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 60730-1:2013	Automatic electrical controls for household and similar use - Part 1: General requirements
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 60950-1:2007	Information technology equipment - Safety - Part 1: General requirements
EN ISO 14663-2:2006	Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
CSA C22.2 No. 60950-1 : 2007 : R2012	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
EN ISO 9988-2:2015	Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
UNI EN ISO 3167 : 2014	PLASTICS - MULTIPURPOSE TEST SPECIMENS
UNI EN ISO 13628-2 : 2007	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
UNI EN 12864 : 2010	LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNI EN ISO 179-1 : 2010	PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
UNI EN 13786 : 2009	AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNI EN 13785 : 2009	REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNI EN ISO 12086-2 : 2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
12/30269989 DC : 0	BS EN 6XXXX-3-1 ED.1.0 - ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS
UNI EN 16129 : 2013	PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
12/30263857 DC : 0	BS EN 4702-05 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - WASHER
I.S. EN ISO 6402-2:2004	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE - (ETHYLENE-PROPYLENE-DIENE) - STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 20753:2008	Plastics Test specimens
UNI EN 15344 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
12/30239867 DC : 0	BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
16/30315531 DC : 0	BS ISO 4582 - PLASTICS - DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS, NATURAL WEATHERING OR LABORATORY LIGHT SOURCES
UNE-EN 50617-1:2015	Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
DIN EN 15345 E : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
BS ISO 6402-1:1990	Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials Designation
I.S. EN ISO 9988-2:2015	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
05/30128281 DC : DRAFT JAN 2005	ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PREN 13565-1 : DRAFT 2016	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
BS 7825-3.3:1997	Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics
DIN EN ISO 9988-2:2015-05	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
BS ISO 14663-2 : 1999 AMD 16029	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
15/30296854 DC : 0	BS ISO 13781 - INPLANTS FOR SURGERY - HOMOPOLYMERS, COPOLYMERS AND BLENDS ON POLY(LACTIDE) - IN VITRO DEGRADATION TESTING
BS ISO 8605:2001	Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification
13/30254721 DC : 0	BS EN ISO 13802 - PLASTICS - VERIFICATION OF PENDULUM IMPACT-TESTING MACHINES - CHARPY, IZOD AND TENSILE IMPACT-TESTING
12/30258453 DC : 0	BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
ISO 15814:1999	Implants for surgery Copolymers and blends based on polylactide In vitro degradation testing
03/118818 DC : DRAFT DEC 2003	BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 10366-2 : 94 AMD 10665	PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 15345:2007	Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates
BS EN 60950-22:2017	Information technology equipment. Safety Equipment to be installed outdoors
ASTM F 2820 : 2012	Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
BS ISO 19213:2017	Implants for surgery. Test methods of material for use as a cortical bone model
BS ISO 12086-2 : 2001 AMD 10637	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS
API 17J REDLINE : 2008	SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ISO 29988-2:2018	Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
I.S. EN 60950-22:2017	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
UNI EN ISO 20753 : 2014	PLASTICS - TEST SPECIMENS
CSA C22.2 No. 0.17 : 2000 : R2013	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
I.S. EN 50617-1:2015	RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 1: TRACK CIRCUITS
EN 62841-3-1:2014/A11:2017	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS (IEC 62841-3-1:2014, MODIFIED)
I.S. EN 62368-1:2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
EN 62368-1:2014/AC:2017-03	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
BS EN ISO 9093-2:2002	Small craft. Seacocks and through-hull fittings Non-metallic
EN ISO 9093-2:2002	Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002)
EN ISO 20753:2014	PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ISO 9093-2:2002	Small craft Seacocks and through-hull fittings Part 2: Non-metallic
I.S. EN 60730-1:2016	AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
ISO 11040-4:2015	Prefilled syringes Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
I.S. EN 15345:2007	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV	Information technology equipment - Safety - Part 1: General requirements
DIN EN ISO 3167:2014-11	PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014)
DIN EN ISO 13802:2016-07	PLASTICS - VERIFICATION OF PENDULUM IMPACT-TESTING MACHINES - CHARPY, IZOD AND TENSILE IMPACT-TESTING (ISO 13802:2015, CORRECTED VERSION 2016-04-01)
BS EN 845-1 : 2013	SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
UNE-EN ISO 179-1:2011	Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
13/30276640 DC : 0	BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY
ISO 4613-2:1995	Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 62282-4-101:2014	Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
BS EN 62109-1:2010	Safety of power converters for use in photovoltaic power systems General requirements
UNE-EN ISO 13802:2016	Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01)
BS EN ISO 10366-2:2003	Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 2580-2:2003	Plastics Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 62282-4-101:2014	Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
ISO 8257-2:2001	Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 12086-2:2006	Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 60950-22:2016	Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
BS EN 12864 : 2001	LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
IEC 60286-6:2004	Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
BS EN ISO 8257-2:2006	Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 6402-2:2003	Plastics Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 60950-1 : 2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
11/30233799 DC : 0	BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS
ISO 8256:2004	Plastics — Determination of tensile-impact strength
ISO 25137-2:2009	Plastics Sulfone polymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 3167:2014	Plastics Multipurpose test specimens
ISO 10366-2:2003	Plastics Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 9988-2:2006	Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 179-1:2010	Plastics. Determination of Charpy impact properties Non-instrumented impact test
BS EN 15342:2007	Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
UNE-EN ISO 3167:2014	Plastics - Multipurpose test specimens (ISO 3167:2014)
BS EN ISO 6402-2:2003	Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 14663-2:2006	Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 13628-2:2006	Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
EN 62109-1 : 2010	SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
EN ISO 8257-2:2006	Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001)
EN 15342:2007	Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
EN 858-1:2002/A1:2004	SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
EN 845-1:2013+A1:2016	Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
EN 13786:2004+A1:2008	Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
EN ISO 12086-2:2006/AC:2009	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 15347:2007	Plastics - Recycled Plastics - Characterisation of plastics wastes
EN 13785:2005+A1:2008	Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
EN ISO 3167:2014	Plastics - Multipurpose test specimens (ISO 3167:2014)
EN ISO 10366-2 : 2003	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 179-1:2010	Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN ISO 2580-2 : 2003	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 15345:2007	Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
EN ISO 8256:2004	Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN ISO 15103-2:2007	Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007)
EN ISO 13802:2015	Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01)
EN ISO 6402-2 : 2003	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 1825-1:2004/AC:2006	GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
EN ISO 25137-2:2017	Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
OVE/ONORM EN 62841-3-1 : 2015 AC 2017	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS (IEC 62841-3-1:2014, MODIFIED)
CSA C22.2 No. 62109-1 : 2016	SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
02/205601 DC : DRAFT APR 2002	IEC 60286-6. ED. 2.0 - CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS
BS ISO 6402-2 : 94 AMD 10652
10/30212123 DC : 0	BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
CEI EN 60893-2 : 2005	INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
DIN 16772-1:1987-09	PLASTIC MOULDING MATERIALS - ACRYLONITRILE BUTADIENE STYRENE (ABS) MATERIALS - CLASSIFICATION AND DESIGNATION
15/30302738 DC : 0	BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL
DIN EN 16129:2013-08	Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
BS ISO 9988-2 : 2006	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ASTM D 5138 : 2016 : REDLINE	Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
UNE-ISO 4582:2014	Plastics. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
I.S. EN 15344:2007	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
DIN ISO 11040-4:2007-10	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
07/30152076 DC : 0	BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 4582:2017	Plastics. Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
BS ISO 1268-8:2004	Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC
BS 2782-9 Method 931A:1988	Methods of testing plastics. Sampling and test specimen preparation Preparation and use of multipurpose test specimens
04/30091870 DC : DRAFT FEB 2004	BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 3126:1987	Method of specifying toughened polystyrene (SB) moulding and extrusion materials
BS ISO 13802 : 99 AMD 16022	PLASTICS - VERIFICATION OF PENDULUM IMPACT-TESTING MACHINES - CHARPY, IZOD AND TENSILE IMPACT-TESTING
I.S. EN ISO 7391-2:2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 9988-2:2015	Plastics. Polyoxymethylene (POM) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 7076-2:2012	Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment
ISO 7076-3:2016	Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment
IEEE 1680.3-2012	IEEE Standard for Environmental Assessment of Televisions
IEEE 1680.2-2012	IEEE Standard for Environmental Assessment of Imaging Equipment
I.S. EN 16129:2013	PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
API TR 17TR8 : 2018	HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
UNE-EN ISO 20753:2015	Plastics - Test specimens (ISO 20753:2008)
ISO 7391-2:2006	Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 7076-4:2016	Fire protection Foam fire extinguishing systems Part 4: High expansion foam equipment
DIN EN ISO 2580-2 E : 2004	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
IEEE 1680.1-2009	IEEE Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays
DIN EN ISO 179-1:2010-11	Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
DIN EN ISO 10366-2:2004-05	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 13199-3:2000	Packaging. Small load carrier systems Bond Stackable System (BSS)
BS EN ISO 15103-2:2007	Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Preparation of test specimens and determination of properties
07/30091745 DC : 0	BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
BS EN 1825-1:2004	Grease separators Principles of design, performance and testing, marking and quality control
IEC 62109-1:2010	Safety of power converters for use in photovoltaic power systems - Part 1: General requirements
BS EN ISO 13802:2015	Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
ISO 14663-2:1999	Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 15344:2007	Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates
BS EN 858-1:2002	Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control
BS EN ISO 179:1997	Plastics. Determination of Charpy impact strength
ISO 179-1:2010	Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
BS EN 60730-1:2011	Automatic electrical controls for household and similar use General requirements
EN 13199-3:2000	Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS)
DIN EN ISO 14663-2:2006-06	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 12086-2:2006-05	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 60286-6:2004	Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
DIN ISO 11040-4:2017-07	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
DIN EN 1825-1:2004-12	Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
EN 62282-4-101:2014	Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN 50405 : 2015 AMD 1 2016	RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS
IEC 60950-22:2016 RLV	Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
EN 50617-1:2015	Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
BS 4935:1989	Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials

ISO 293:2004	Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 3167:2014	Plastics Multipurpose test specimens
ISO 295:2004	Plastics — Compression moulding of test specimens of thermosetting materials
ISO 10724-1:1998	Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens
EN ISO 2818:1996	PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING
ISO 2602:1980	Statistical interpretation of test results Estimation of the mean Confidence interval
EN ISO 3167:2014	Plastics - Multipurpose test specimens (ISO 3167:2014)
EN ISO 295 : 2004	PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS
ISO 291:2008	Plastics Standard atmospheres for conditioning and testing
EN ISO 291:2008	Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
ISO 294-1:2017	Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
ISO 2818:1994	Plastics — Preparation of test specimens by machining
ISO 13802:2015	Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
EN ISO 294-1:2017	Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017)