ISO 2063-2:2017
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
09-13-2017
ISO 2063-2:2017 specifies requirements for corrosion protection of steel structures, components or parts, which are coated by thermal spraying of zinc, aluminium or their alloys.
ISO 2063-2:2017 specifies requirements for coating manufacturers of surface preparation, thermal spraying, testing and post treatments, e.g. sealing of the coating. ISO 2063-2:2017 applies to metallic corrosion protection coatings in the case of new fabrication in the workshop, as well as on-site and for repair on-site after assembly.
Requirements for coating thickness, minimum adhesive strength and surface conditions, specified in a coating specification, are given.
Recommendations are given for suitable process steps and quality assurance measures for new production and maintenance and for supervising of corrosion protection works.
ISO 2063-2:2017 covers the application of thermal-sprayed zinc, aluminium and their alloys for protection against corrosion in the temperature range between ?50 °C to +200 °C. Heat-resistant protective coatings of aluminium are covered by ISO 17834 and are not in the scope of ISO 2063-2:2017.
ISO 2063-2:2017 specifies requirements for the equipment, the working place and the qualification of the spray and testing personnel.
NOTE ISO 2063‑1:2017 is addressed to the designer and to the planning engineer of corrosion protection system.
Committee |
ISO/TC 107
|
DevelopmentNote |
Supersedes ISO/DIS 2063-2. Together with ISO 2063-1, it Supersedes ISO 2063. (09/2017)
|
DocumentType |
Standard
|
Pages |
37
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NEN EN ISO 2063-2 : 2017 | Identical |
EN ISO 2063-2:2017 | Identical |
NF EN ISO 2063-2 : 2017 | Identical |
UNI EN ISO 2063-2 : 2017 | Identical |
BS EN ISO 2063-2:2017 | Identical |
DIN EN ISO 2063-2:2018-02 | Identical |
SN EN ISO 2063-2 : 2018 | Identical |
SS-EN ISO 2063-2 : 2017 | Identical |
PN EN ISO 2063-2 : 2017 | Identical |
ONORM EN ISO 2063-2 : 2018 | Identical |
DIN EN ISO 2063-2:2014-06 (Draft) | Identical |
UNE-EN ISO 2063-2:2018 | Identical |
I.S. EN ISO 2063-2:2017 | Identical |
DIN EN ISO 2063-2 E : 2018 | Identical |
NS EN ISO 2063-2 : 2017 | Identical |
BS EN ISO 12944-6:2018 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods |
ISO 2063-1:2017 | Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems |
EN ISO 12944-6:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) |
I.S. EN ISO 2063-1:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017) |
I.S. EN ISO 12944-6:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018) |
ISO 12944-6:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods |
ISO 19840:2012 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
ISO 14917:2017 | Thermal spraying — Terminology, classification |
ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
ISO 8502-4:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
ISO 12679:2011 | Thermal spraying Recommendations for thermal spraying |
ISO 14232:2000 | Thermal spraying Powders Composition and technical supply conditions |
EN 1395-3:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying |
ISO 14713-1:2017 | Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
EN 1395-1:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements |
ISO 17834:2003 | Thermal spraying Coatings for protection against corrosion and oxidation at elevated temperatures |
CEN/TR 15339-5:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed units |
ISO 11126-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag |
ISO 8503-3:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure |
ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
CEN/TR 15339-4:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply |
ISO 8501-3:2006 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
ISO 14918:1998 | Thermal spraying Approval testing of thermal sprayers |
CEN/TR 15339-1:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements |
EN 15339-2:2007 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
EN 15520:2007 | Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings |
ASTM D 610 : 2008 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
ISO 11126-10:2017 | Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet |
ISO 14916:2017 | Thermal spraying — Determination of tensile adhesive strength |
ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
EN 1395-6:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems |
ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
ISO 11126-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag |
EN 1395-7:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems |
ISO 11124-2:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 2: Chilled-iron grit |
ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
ISO 8501-2:1994 | Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
ISO 12944-3:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
ISO 12690:2010 | Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities |
ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
EN 13507:2010 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
ISO 12671:2012 | Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings |
ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
ISO 14922-1:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use |
ISO 2063-1:2017 | Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems |
ISO 14919:2015 | Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions |
EN 15648:2009 | Thermal spraying - Component related procedure qualification |
CEN/TR 15339-6:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter |
CEN/TR 15339-3:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units |
ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
EN 1395-2:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF |
ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.