ISO 21011:2008
Current
The latest, up-to-date edition.
Cryogenic vessels — Valves for cryogenic service
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
01-24-2008
ISO 21011:2008 specifies the requirements for the design, manufacture and testing of valves for a rated temperature of -40 °C and below (cryogenic service), i.e. for operation with cryogenic fluids in addition to operation at temperatures from ambient to cryogenic.
ISO 21011:2008 applies to all types of cryogenic valves, including vacuum jacketed cryogenic valves up to size DN 150.
ISO 21011:2008 is not applicable to pressure relief valves covered by ISO 21013-1.
Committee |
ISO/TC 220
|
DevelopmentNote |
Supersedes ISO/DIS 21011. (01/2008)
|
DocumentType |
Standard
|
Pages |
12
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
BS ISO 21011:2008 | Identical |
ISO 17879:2017 | Gas cylinders — Self-closing cylinder valves — Specification and type testing |
UNE-EN ISO 28921-2:2018 | Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015) |
BS ISO 12991:2012 | Liquefied natural gas (LNG). Tanks for on-board storage as a fuel for automotive vehicles |
ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
I.S. EN ISO 28921-1:2017 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013) |
UNE-EN ISO 17879:2017 | Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017) |
BS ISO 20421-1:2006 | Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing |
EN ISO 28921-2:2017 | Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015) |
EN ISO 28921-1:2017 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
DIN EN ISO 28921-1:2017-05 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
11/30246933 DC : 0 | BS ISO 28921-1 - INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW TEMPERATURES APPLICATION - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING |
BS EN ISO 28921-1:2017 | Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing |
16/30301299 DC : 0 | BS EN ISO 17879 - GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
04/102832 DC : DRAFT JAN 2004 | ISO 13985 - LIQUID HYDROGEN - LAND VEHICLE FUEL TANKS |
14/30293296 DC : 0 | BS ISO 28921-2 - INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING |
BS ISO 28921-1 : 2013 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING |
BS EN ISO 28921-2:2017 | Industrial valves. Isolating valves for low-temperature applications Type testing |
DIN EN ISO 28921-2 E : 2017 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING (ISO 28921-2:2015) |
I.S. EN ISO 28921-2:2017 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING (ISO 28921-2:2015) |
BS EN ISO 16924:2018 | Natural gas fuelling stations. LNG stations for fuelling vehicles |
BS ISO 20421-1:2019 | Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing |
I.S. EN ISO 10297:2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014, CORRECTED VERSION 2014-11-01) |
13/30271407 DC : DRAFT DEC 2013 | BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
BS ISO 16924 : 2016 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
12/30246391 DC : DRAFT JULY 2012 | BS ISO 10297 - GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
18/30350515 DC : 0 | BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
I.S. EN ISO 17879:2017 | GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17879:2017) |
ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
EN ISO 17879:2017 | Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017) |
ISO 12991:2012 | Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles |
ISO 20421-1:2006 | Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing |
18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
11/30194638 DC : 0 | BS ISO 12991 - LIQUEFIED NATURAL GAS (LNG) - TRANSPORTABLE TANKS FOR USE ON BOARD VEHICLES |
BS EN ISO 17879:2017 | Gas cylinders. Self-closing cylinder valves. Specification and type testing |
BS ISO 28921-2 : 2015 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING |
DIN EN ISO 28921-2:2017-05 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING (ISO 28921-2:2015) |
DIN EN ISO 28921-1 E : 2017 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013) |
SAE AIR 6464 : 2013 | EUROCAE/SAE WG80/AE-7AFC HYDROGEN FUEL CELLS AIRCRAFT FUEL CELL SAFETY GUIDELINES |
I.S. EN ISO 16924:2018 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016) |
ISO 28921-1:2013 | Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing |
ISO 28921-2:2015 | Industrial valves Isolating valves for low-temperature applications Part 2: Type testing |
UNE-EN ISO 10297:2015 | Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01) |
11/30211394 DC : DRAFT MAR 2011 | BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
BS EN ISO 10297 : 2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
EN ISO 10297:2014/A1:2017 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014/AMD 1:2017) |
EN ISO 16924:2018 | Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016) |
ISO 16924:2016 | Natural gas fuelling stations — LNG stations for fuelling vehicles |
BS ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels Part 1: Design, fabrication, inspection and tests |
UNE-EN ISO 28921-1:2018 | Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
ISO 21029-1:2018 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests |
DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
ISO 21013-1:2008 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves |
ISO 21010:2014 | Cryogenic vessels Gas/materials compatibility |
ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
ISO 21028-1:2016 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C |
ISO 21028-2:2004 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 2: Temperatures between -80 degrees C and -20 degrees C |
ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
ISO 21029-1:2004 | Cryogenic vessels Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 1: Design, fabrication, inspection and tests |
ISO 23208:2017 | Cryogenic vessels — Cleanliness for cryogenic service |
ISO 5208:2015 | Industrial valves Pressure testing of metallic valves |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.