• There are no items in your cart

ISO 21013-2:2007

Current
Current

The latest, up-to-date edition.

Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

06-01-2007

ISO 21013-2:2007 specifies the requirements for the design, manufacture and testing of nonreclosable pressurerelief devices for cryogenic service, i.e. for operation with cryogenic fluids in addition to operation at temperatures from ambient to cryogenic.

ISO 21013-2:2007 is restricted to burstingdisc and bucklingpin devices not exceeding a size of DN 200 designed to relieve singlephase vapours or gases. A burstingdisc or bucklingpin assembly may be specified, constructed and tested such that it is suitable for use with more than one gas or with mixtures of gases.

ISO 21013-2:2007 does not provide methods for determining the capacity of bursting disc or buckling pin devices for a particular cryogenic vessel. Such methods are provided in ISO 21013-3.

DevelopmentNote
Supersedes ISO/DIS 21013-2. (06/2007)
DocumentType
Standard
Pages
6
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
NEN ISO 21013-2 : 2007 Identical
BS ISO 21013-2 : 2007 Identical

13/30271407 DC : DRAFT DEC 2013 BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
16/30294444 DC : 0 BS ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS
ISO 16924:2016 Natural gas fuelling stations — LNG stations for fuelling vehicles
BS EN ISO 16924:2018 Natural gas fuelling stations. LNG stations for fuelling vehicles
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
BS ISO 16924 : 2016 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
18/30350515 DC : 0 BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING
04/102832 DC : DRAFT JAN 2004 ISO 13985 - LIQUID HYDROGEN - LAND VEHICLE FUEL TANKS
SAE AIR 6464 : 2013 EUROCAE/SAE WG80/AE-7AFC HYDROGEN FUEL CELLS AIRCRAFT FUEL CELL SAFETY GUIDELINES
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
ISO 21029-1:2018 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
I.S. EN ISO 16924:2018 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016)
EN ISO 16924:2018 Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016)

ISO 11114-1:2012 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials
ISO 21013-3:2016 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination
ISO 21010:2014 Cryogenic vessels Gas/materials compatibility
ASME PV CODE 8 DIV 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
ISO 6708:1995 Pipework components Definition and selection of DN (nominal size)
ISO 21028-1:2016 Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C
ISO 21028-2:2004 Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 2: Temperatures between -80 degrees C and -20 degrees C
ISO 11114-2:2013 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials
ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
CGA S 1.2 : 2009 PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
ISO 20421-1:2006 Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing
ISO 21029-1:2004 Cryogenic vessels Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 1: Design, fabrication, inspection and tests
CGA S 1.3 : 2008 PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES
ISO 21009-1:2008 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests
ISO 23208:2017 Cryogenic vessels — Cleanliness for cryogenic service

View more information
US$49.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.