• There are no items in your cart

ISO 2470-2:2008

Current
Current

The latest, up-to-date edition.

Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness)
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

10-22-2008

ISO 2470-2:2008 specifies a method for measuring the D65 brightness of pulps, papers and boards.

ISO 2470-2:2008 is limited in its scope to white and near-white pulps, papers and boards, particularly those exhibiting fluorescence which promotes the appearance of whiteness. The measurement can only be made in an instrument in which the ultraviolet energy level of the illumination has been adjusted to correspond to the CIE standard illuminant D65 using a fluorescent reference standard.

The source employed in ISO 2470-2:2008 excites almost twice as much fluorescence as the illuminant in ISO 2470-1. Consequently, ISO 2470-2:2008 is better suited for measuring the fluorescent contribution to the brightness. However, D65 brightness should not be confused with ISO brightness which closely approximates the brightness of papers viewed under indoor conditions.

DevelopmentNote
Supersedes ISO/DIS 2470-2. (10/2008)
DocumentType
Standard
Pages
8
PublisherName
International Organization for Standardization
Status
Current

Standards Relationship
BIS IS/ISO 2470-2 : 2008 Identical
SS-ISO 2470-2:2008 Identical
AS/NZS 1301.520:2016 Identical
BS ISO 2470-2:2008 Identical
NEN ISO 2470-2 : 2013 Identical
NF ISO 2470-2 : 2008 Identical
UNI ISO 2470-2 : 2010 Identical

BS ISO 2469:2014 Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor)
15/30325867 DC : 0 BS EN 868-3 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS
BS ISO 19699-1:2017 Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood Test methods
ISO 12625-7:2014 Tissue paper and tissue products Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight)
EN ISO 12625-7:2014 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014)
UNE-EN 868-7:2017 Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods
BS EN ISO 12625-1:2011 Tissue paper and tissue products General guidance on terms
UNE-EN 868-2:2017 Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods
UNE-EN ISO 12625-7:2015 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014)
BS EN 868-3:2017 Packaging for terminally sterilized medical devices Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods
UNE-EN 868-6:2017 Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
DIN EN 868-2:2017-05 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS
PD ISO/TR 10688:2015 Paper, board and pulps. Basic terms and equations for optical properties
15/30274545 DC : 0 BS ISO 18522 - PAPER AND BOARD - AUTOMATED OFF-LINE TESTING OF PHYSICAL PROPERTIES FOR CD (CROSS DIRECTION) PROFILES
PREN 868-7 : DRAFT 2015 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS
09/30207367 DC : 0 BS ISO 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL PRINCIPLES FOR THE USE OF TERMS
12/30252903 DC : 0 BS ISO 15397 - GRAPHIC TECHNOLOGY - COMMUNICATION OF GRAPHIC PAPER PROPERTIES
ISO 2469:2014 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)
ISO/TS 20460:2015 Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges
PREN 868-3 : DRAFT 2015 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS
BS EN 868-7:2017 Packaging for terminally sterilized medical devices Adhesive coated paper for low temperature sterilization processes. Requirements and test methods
I.S. EN ISO 12625-7:2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014)
I.S. EN 868-3:2017 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS
I.S. EN 868-2:2017 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS
17/30357546 DC : 0 BS EN ISO 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS
BS ISO 5631-2:2015 Paper and board. Determination of colour by diffuse reflectance Outdoor daylight conditions (D65/10°)
14/30287212 DC : 0 BS ISO 11475 - PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, D65/10 DEGREES (OUTDOOR DAYLIGHT)
ISO 11475:2017 Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
15/30325864 DC : 0 BS EN 868-7 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS
BS ISO 15397:2014 Graphic technology. Communication of graphic paper properties
UNE-ISO 5631-2:2015 Paper and board. Determination of colour by diffuse relfectance. Part 2: Outdoor daylight conditions (D65/10º)
ISO 19699-1:2017 Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods
ISO 15397:2014 Graphic technology Communication of graphic paper properties
BS ISO 2470-1:2016 Paper, board and pulps. Measurement of diffuse blue reflectance factor Indoor daylight conditions (ISO brightness)
PREN 868-2 : DRAFT 2015 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS
ISO 2470-1:2016 Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness)
ISO 12647-3:2013 Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint
EN 868-7:2017 Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods
UNI EN ISO 12625-7 : 2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREES (OUTDOOR DAYLIGHT)
UNI EN ISO 12625-1 : 2011 TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS
15/30325855 DC : 0 BS EN 868-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS
11/30239244 DC : 0 BS EN ISO 12625-7 - TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR
ISO/TR 10688:2015 Paper, board and pulps Basic terms and equations for optical properties
16/30328584 DC : 0 BS ISO 19699-1 - PLASTICS - SUPERABSORBENT POLYMER - SODIUM POLYACRYLATE RESIN FOR ABSORBING BLOOD - PART 1: TEST METHODS
15/30311307 DC : 0 BS ISO 5631-2 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES)
PREN 868-6 : DRAFT 2015 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS
BS ISO 12647-3:2013 Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints Coldset offset lithography on newsprint
ISO 12625-1:2011 Tissue paper and tissue products Part 1: General guidance on terms
ISO 5631-2:2015 Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)
DIN EN 868-6:2015-08 (Draft) PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS
DIN EN ISO 12625-7:2014-08 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10? (outdoor daylight) (ISO 12625-7:2014)
BS EN 868-2:2017 Packaging for terminally sterilized medical devices Sterilization wrap. Requirements and test methods
BS EN ISO 12625-7:2014 Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight)
BS EN 868-6:2017 Packaging for terminally sterilized medical devices Paper for low temperature sterilization processes. Requirements and test methods
EN 868-2:2017 Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods
EN ISO 12625-1:2011 Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011)
EN 868-6:2017 Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
EN 868-3:2017 Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods
UNE-ISO 2470-1:2012 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
BS ISO 18522:2016 Paper and board. Automated off-line testing of physical properties for CD (cross direction) profiles
PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
BS ISO 11475:2017 Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight)
15/30325858 DC : 0 BS EN 868-6 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS
DIN EN 868-7:2015-08 (Draft) PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS
TAPPI T 579 : 2012 DIFFUSE BRIGHTNESS OF PAPER, PAPERBOARD AND PULP (D/0) (ULTRAVIOLET LEVEL D65)
UNE-ISO 12647-3:2015 Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Part 3: Coldset offset lithography on newsprint.
I.S. EN ISO 12625-1:2011 TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS
DIN EN 868-3:2015-08 (Draft) PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS
DIN EN 868-2:2015-08 (Draft) PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS
UNE-EN ISO 12625-1:2012 Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011)
UNE-EN 868-3:2017 Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods
DIN EN 868-3:2017-05 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS
DIN EN 868-6:2017-05 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS

ISO 4094:2005 Paper, board and pulps International calibration of testing apparatus Nomination and acceptance of standardizing and authorized laboratories
ISO 11476:2016 Paper and board Determination of CIE whiteness, C/2 (indoor illumination conditions)
ISO 187:1990 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
ISO 2470-1:2016 Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness)
ISO 186:2002 Paper and board — Sampling to determine average quality
ISO 11475:2017 Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
ISO 10526:2007 CIE standard illuminants for colorimetry
ISO 2469:2014 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)
ISO 3688:1999 Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
ISO 7213:1981 Pulps Sampling for testing

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.