ISO 3651-1:1998
Current
Current
The latest, up-to-date edition.
Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
05-13-1998
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NF EN ISO 3651-1 : 1998 | Identical |
EURONORM 121 : 1972 | Identical |
UNE 7375-1:1976 | Similar to |
NFA 05 160 : 1984 | Similar to |
NBN EN ISO 3651-1 : 1998 | Identical |
NEN EN ISO 3651-1 : 1998 | Identical |
NS EN ISO 3651-1 : 1ED 1998 | Identical |
I.S. EN ISO 3651-1:1998 | Identical |
PN EN ISO 3651-1 : 2004 | Identical |
SN EN ISO 3651-1 : 1998 | Identical |
UNI EN ISO 3651-1 : 2000 | Identical |
UNI 6376 : 1985 | Similar to |
SS-EN ISO 3651-1 : 1998 | Identical |
BS EN ISO 3651-1:1998 | Identical |
UNE-EN ISO 3651-1:1999 | Identical |
EN ISO 3651-1 : 1998 | Identical |
DIN 50921:1984-10 | Similar to |
DIN EN ISO 3651-1:1998-08 | Identical |
BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
05/30129558 DC : 0 | PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
ISO 404:2013 | Steel and steel products — General technical delivery requirements |
BS EN 4500-005:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for steels |
13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
UNI EN 4700-006 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
05/30129551 DC : 0 | PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
PREN 4700-004 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 4: WIRE |
PREN 4700-005 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
ISO 13583-1:2015 | Centrifugally cast steel and alloy products — Part 1: General testing and tolerances |
I.S. EN 4700-007:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
BS EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Tapping screws |
BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
I.S. EN ISO 3506-4:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 4: TAPPING SCREWS |
EN 10312:2002/A1:2005 | WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
18/30364236 DC : 0 | BS ISO 1835 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - MEDIUM TOLERANCE SLING CHAINS - GRADE 4, STAINLESS STEEL |
EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
UNI EN 4700-007 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
ISO 683-13:1974 | Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels |
DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
DIN EN ISO 3506-4:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
BS EN 10312:2002 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions |
BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
DIN EN 1559-2:2014-12 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN 1559-2:2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
BS 6105:1981 | Specification for corrosion-resistant stainless steel fasteners |
18/30351048 DC : 0 | BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS |
BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
UNI EN 4700-005 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
NACE TM 01 69 : 2012 | Standard Guide for Laboratory Immersion Corrosion Testing of Metals |
UNI EN 4700-004 : 2011 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
05/30129388 DC : DRAFT FEB 2005 | ISO 21610 - CORROSION OF METALS AND ALLOYS - ACCELERATED CORROSION TEST FOR INTERGRANULAR CORROSION SUSCEPTIBILITY OF AUSTENITIC STAINLESS STEELS |
ASTM G 31 : 2012 | GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS |
ISO 9330-6:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes |
I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
UNI EN 4700-003 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
ISO 9329-4:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
PREN 1559-2 : DRAFT 2012 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws |
UNI EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
ONORM EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
UNI EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
ONORM EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
UNI EN 1559-2 : 2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
UNI EN ISO 3506-4 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 4: TAPPING SCREWS |
UNI EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
12/30266615 DC : 0 | BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
BS EN 4700-003:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
PREN 4700-003 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
05/30129555 DC : 0 | PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
UNI EN 4500-005 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS |
UNI EN 4700-001 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
BS EN 1559-2:2014 | Founding. Technical conditions of delivery Additional requirements for steel castings |
UNE-EN ISO 3506-2:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
I.S. EN ISO 3506-2:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
I.S. EN ISO 3506-1:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
UNE-EN ISO 3506-4:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
EN 4500-005:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels |
EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
EN 4700-003:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
EN 4700-007:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
BS ISO 13583-1:2015 | Centrifugally cast steel and alloy products General testing and tolerances |
I.S. EN 4500-005:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS |
I.S. EN 4700-003:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
13/30252127 DC : 0 | BS ISO 13583-1 - CENTRIFUGALLY CAST STEEL AND ALLOY PRODUCTS - PART 1: GENERAL TESTING AND TOLERANCES |
BS EN 4700-007:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
ASTM G 31 : 2012 : REV A | GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS |
I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
PREN 4500-005 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS |
PREN 4700-007 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
PREN 4700-001 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
DIN EN 10312:2005-12 | Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005 |
US$49.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.