ISO 3733:1999
Current
Current
The latest, up-to-date edition.
Petroleum products and bituminous materials — Determination of water — Distillation method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
10-14-1999
This International Standard specifies a method for determination of water up to 25 % in petroleum products,
bitumens, tars and products derived from these materials, excluding emulsions, by the distillation method. The
specific products considered during the development of this test method are listed in Table 3.
This International Standard may be used to determine water content in excess of 25 %. However, no precision data
has been determined at levels greater than 25 %. Volatile water-soluble material, if present, is measured as water.
NOTE 1 A knowledge of the water content of petroleum products is important in the refining, purchase, sale and transfer of
products.
NOTE 2 The amount of water determined by this method can be used to correct the volume involved in the custody transfer
of product.
| DevelopmentNote |
Also numbered as BS 2000-74(2000) (06/2005)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN ISO 3733:2003-02 | Identical |
| NEN ISO 3733 : 1999 | Identical |
| SAC GB/T 260 : 2016 | Identical |
| SS-ISO 3733 : 2000 | Identical |
| NF ISO 3733 : 2002 | Identical |
| IS 1448 : Part 40 : 2015 | Identical |
| GOST ISO 3733 : 2013 ERRATA 2015 | Identical |
| NBN ISO 3733 : 2000 | Identical |
| UNE 51027:1978 | Identical |
| PN ISO 3733 : 2008 | Identical |
| BS 4385:1980 | Identical |
| NFT 60 113 : 1986 | Similar to |
| BS 2000-74:2000 | Identical |
| BS ISO/TS 12928:1999 | Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications |
| BS ISO 12922 : 99 AMD 13874 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| 13/30279896 DC : 0 | BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
| 08/30178054 DC : DRAFT FEB 2008 | BS EN ISO 12922 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| BS ISO 21072-2:2009 | Ships and marine technology. Marine environment protection. Performance testing of oil skimmers. Static water conditions |
| ISO 4261:2013 | Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications |
| SAE MS 1010 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE T TURBINE OILS - SPECIFICATION |
| ISO 3734:1997 | Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method |
| BS ISO 8178-5:2008 | Reciprocating internal combustion engines. Exhaust emission measurement Test fuels |
| ASTM D 7044 : 2015 : REDLINE | Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids |
| DIN EN 14260 E : 2003 | DERIVATIVES FROM COAL PYROLYSIS - COAL TAR AND PITCH BASED BINDERS AND RELATED PRODUCTS: ROAD TARS - CHARACTERISTICS AND TEST METHODS |
| DIN EN 14998 E : 2005 | DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: FLUXING OILS - SPECIFICATIONS AND TEST METHODS |
| BS EN ISO 20783-2:2003 | Petroleum and related products. Determination of emulsion stability of fire-resistant fluids Fluids in category HFB |
| BS EN 14998:2005 | Derivatives from coal pyrolysis. Coal tar based oils: fluxings oils. Specifications and test methods |
| EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
| BS EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| BS EN 13991:2003 | Derivatives from coal pyrolysis. Coal tar based oils. Creosotes. Specifications and test methods |
| DIN EN 212:2003-09 | WOOD PRESERVATIVES - GENERAL GUIDANCE ON SAMPLING AND PREPARATION FOR ANALYSIS OF WOOD PRESERVATIVES AND TREATED TIMBER |
| DIN EN 15536:2007-06 | Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods |
| DIN EN 14998:2005-04 | Derivatives from coal pyrolysis - Coal tar based oils: fluxing oils - Specifications and test methods |
| EN 13137 : 2001 | CHARACTERIZATION OF WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) IN WASTE, SLUDGES AND SEDIMENTS |
| BS MA 100:1989 | Specification for petroleum fuels for marine oil engines and boilers |
| BS MA 100:1996 | Specification for petroleum fuels for marine oil engines and boilers |
| BS 6043-1.2:1981 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch Determination of water content (Dean and Stark method) |
| ISO 21072-2:2009 | Ships and marine technology Marine environment protection: performance testing of oil skimmers Part 2: Static water conditions |
| BS ISO 21072-1:2009 | Ships and marine technology. Marine environment protection. Performance testing of oil skimmers Moving water conditions |
| 17/30351591 DC : 0 | BS 2869 - FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
| BS 2000-476(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-476: PETROLEUM LIQUIDS - AUTOMATIC PIPELINE SAMPLING |
| BS ISO/TR 13739:1998 | Petroleum products. Methods of specifying practical procedures for the transfer of bunker fuels to ships |
| MS 1007 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE G SLIDEWAY LUBRICANTS - SPECIFICATION |
| 12/30261072 DC : 0 | BS ISO 4261 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF GAS TURBINE FUELS FOR INDUSTRIAL AND MARINE APPLICATIONS |
| 16/30294369 DC : 0 | BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS |
| DIN EN 16028:2012-10 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| DIN 52027:2003-11 | TESTING OF CARBONACEOUS MATERIALS - DISTILLATION OF REFINED COAL TARS |
| ISO 21072-1:2009 | Ships and marine technology Marine environment protection: performance testing of oil skimmers Part 1: Moving water conditions |
| BS 2000-356(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD |
| SAE MS 1004 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE H (HYDRAULIC FLUIDS) - SPECIFICATION |
| SAE MS 1001 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION |
| SAE MS 1005 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
| I.S. EN 16028:2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| UNI EN 12082 : 2011 | RAILWAY APPLICATIONS - AXLEBOXES - PERFORMANCE TESTING |
| ISO 13579-1:2013 | Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 1: General methodology |
| DIN EN ISO 12922:2013-04 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
| DIN EN 15536 E : 2007 | DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: WASH OILS - SPECIFICATIONS AND TEST METHODS |
| BS EN 15536:2007 | Derivatives from coal pyrolysis. Coal tar based oils. Wash oils. Specifications and test methods |
| BS EN 14156:2003 | Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods |
| I.S. EN ISO 3170:2004 | PETROLEUM LIQUIDS - MANUAL SAMPLING |
| I.S. EN ISO 8178-5:1998 | RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
| I.S. EN 13137:2001 | CHARACTERIZATION OF WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) IN WASTE, SLUDGES AND SEDIMENTS |
| BS 3863:1992 | Guide for gas turbines procurement |
| 11/30232917 DC : 0 | BS ISO 13579-1 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - METHOD OF MEASURING ENERGY BALANCE AND CALCULATING EFFICIENCY - PART 1: GENERAL METHODOLOGY |
| BS ISO 8217:2017 | Petroleum products. Fuels (class F). Specifications of marine fuels |
| 17/30352956 DC : 0 | BS ISO 8178-6 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 6: REPORT OF MEASURING RESULTS AND TEST |
| 09/30207718 DC : 0 | BS ISO 7745 - HYDRAULIC FLUID POWER - FIRE-RESISTANT (FR) FLUIDS - GUIDELINES FOR USE |
| ISO 8217:2017 | Petroleum products Fuels (class F) Specifications of marine fuels |
| 03/303313 DC : DRAFT APR 2003 | EN 14639 - CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS |
| NF ISO 3734 : 2000 | PETROLEUM PRODUCTS - DETERMINATION OF WATER AND SEDIMENT IN RESIDUAL FUEL OILS - CENTRIFUGE METHOD |
| BS EN 16028:2012 | Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
| ISO 8178-5:2015 | Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels |
| ISO 18436-5:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
| DIN EN ISO 20783-2:2004-05 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003) |
| DIN EN 14639 E : 2005 | CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS |
| BS EN 212:2003 | Wood preservatives. General guidance on sampling and preparation for analysis of wood preservatives and treated timber |
| ISO 20783-2:2003 | Petroleum and related products Determination of emulsion stability of fire-resistant fluids Part 2: Fluids in category HFB |
| UNI EN ISO 12922 : 2013 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| EN 14998:2005 | Derivatives from coal pyrolysis - Coal tar based oils: fluxings oils - Specifications and test methods |
| EN ISO 20783-2:2003 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003) |
| EN 14156:2003 | Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods |
| EN 14260:2003 | Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : road tars - Characteristics and test methods |
| EN ISO 8178-5 : 1997 | RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS |
| UNI EN 16028 : 2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| ONORM EN 16028 : 2013 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| DIN ISO 8217:2013-12 | PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS (ISO 8217:2012) |
| BS 3195-2:1989 | Methods for sampling petroleum products Automatic pipeline sampling of liquid hydrocarbons |
| BS ISO 8178-6:2000 | Reciprocating internal combustion engines. Exhaust emission measurement Report of measuring results and test |
| BS ISO 18436-5:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
| BS ISO 2314:2009 | Gas turbines. Acceptance tests |
| PD ISO/TR 18792:2008 | Lubrication of industrial gear drives |
| SAE MS 1003 : 2018 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION |
| BS 2000-386(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - COULOMETRIC KARL FISCHER TITRATION METHOD |
| SAE MS 1003-2 : 2004 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013) |
| DIN EN ISO 3170:2004-06 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| UNE-EN ISO 12922:2013 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
| UNE-EN 16028:2013 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| BS EN 14639:2005 | Crude tar and crude benzole. Characteristics and test methods |
| BS EN 14155:2003 | Derivatives from coal pyrolysis. Carbon black feedstock. Specifications and test methods |
| BS EN ISO 3171:1999 | Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling |
| I.S. EN ISO 12922:2012 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| BS EN 13137:2001 | Characterisation of waste. Determination of total organic carbon (TOC) in waste, sludges and sediments |
| BS EN ISO 8178-5:1997 | Reciprocating internal combustion engines. Exhaust emission measurement Test fuels |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| EN 16028:2012 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
| EN 14155:2003 | Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods |
| EN 14639:2005 | Crude tar and crude benzole - Characteristics and test methods |
| EN 13991:2003 | DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: CREOSOTES - SPECIFICATIONS AND TEST METHODS |
| EN 212:2003 | Wood preservatives - General guidance on sampling and preparation for analysis of wood preservatives and treated timber |
| EN 15536:2007 | Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods |
| DIN EN 16028 E : 2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| BS ISO 7745:2010 | Hydraulic fluid power. Fire-resistant FR) fluids. Requirements and guidelines for use |
| BS 2882:1980 | Method for determination of water and sediment in crude petroleum and fuel oils (centrifuge method) |
| ISO 10336:1997 | Crude petroleum Determination of water Potentiometric Karl Fischer titration method |
| 09/30199768 DC : 0 | BS EN 15936 - SLUDGE, WASTE, TREATED BIOWASTE AND SOIL - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) BY DRY COMBUSTION |
| ISO 9114:1997 | Crude petroleum Determination of water content by hydride reaction Field method |
| BS ISO 13579-1:2013 | Industrial furnaces and associated processing equipment. Method of measuring energy balance and calculating efficiency General methodology |
| 01/124221 DC : DRAFT NOV 2001 | BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS |
| BS ISO 4261:2013 | Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications |
| 09/30206973 DC : 0 | BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS |
| SAE MS 1000 : 2013 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
| SAE MS 1009 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION |
| MS 1011 : 2013(s2018) | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS - TYPE X (GREASES) - SPECIFICATION |
| UNI ISO 18436-5 : 2013 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
| ISO 2314:2009 | Gas turbines — Acceptance tests |
| NF ISO 10336 : 1998 | CRUDE PETROLEUM - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD |
| BS 2000-475(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-475: PETROLEUM LIQUIDS - MANUAL SAMPLING |
| UNI 6579 : 2009 | LIQUID FUELS FOR INDUSTRIAL AND DOMESTIC THERMAL PURPOSES - CLASSIFICATION AND CHARACTERISTICS |
| ISO 8178-6:2000 | Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test |
| ISO 12922:2012 | Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| BS EN 14260:2003 | Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Road tars. Characteristics and test methods |
| BS EN ISO 3170:2004 | Methods of test for petroleum and its products. BS 2000-475: Petroleum liquids. Manual sampling |
| BS 2869:2017 | Fuel oils for agricultural, domestic and industrial engines and boilers Specification |
| DIN EN 14156:2003-11 | DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: COAL TAR FUEL - SPECIFICATIONS AND TEST METHODS |
| DIN EN 14155:2003-11 | DERIVATIVES FROM COAL PYROLYSIS - CARBON BLACK FEEDSTOCK - SPECIFICATIONS AND TEST METHODS |
| DIN EN 14639:2005-11 | Crude tar and crude benzole - Characteristics and test methods; German version EN 14639:2005 |
| DIN EN 14260:2003-12 | Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Road tars - Characteristics and test methods; German version EN 14260:2003 |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
US$111.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.