ISO 3864-2 : 2016

Current

Current The latest, up-to-date edition.

Preview

GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 2: DESIGN PRINCIPLES FOR PRODUCT SAFETY LABELS

Publisher: International Organization for Standardization

Published:

Available Formats: PDF - French, Hardcopy - French, PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Purpose of safety colours
5 Hazard severity panels
6 Type and layout of product safety labels
Annex A (informative) - Guidelines for increasing the
        recognition of product safety label components
Annex B (informative) - Translation of signal words
Annex C (informative) - Examples of product safety labels
Annex D (informative) - Product safety label development
        considerations
Annex E (informative) - References from colour order
        systems for safety colour orange
Bibliography

Abstract - (Show below) - (Hide below)

Specifies additional principles to ISO 3864-1 for the design of safety labels for products, i.e. any items manufactured and offered for sale in the normal course of commerce, including but not limited to consumer products and industrial equipment.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 145
Supersedes	ISO/DIS 3864-2 : 60.00 (2016) ISO 3864-2 : 2004

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NEN ISO 3864-2 : 2016	Identical
DIN ISO 3864-2 : 2008	Identical
DS ISO 3864-2 : 2016	Identical
NF ISO 3864-2 : 2017	Identical
NS ISO 3864-2 : 2016	Identical
SS-ISO 3864-2:2016	Identical
DS ISO 3864-2 : 2016	Identical
DIN ISO 3864-2 : 2008	Identical
DIN ISO 3864-2 E : 2008	Identical
NF ISO 3864-2 : 2017	Identical
SS-ISO 3864-2:2016	Identical
NS ISO 3864-2 : 2016	Identical
BIS IS 16449-2 : 2015	Identical
NEN ISO 3864-2 : 2016	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS ISO 12643-1 : 2009	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 7010 E : 2012	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 6:2014)
11/30214919 DC : 0	BS ISO 3864-3 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS
DIN EN ISO 11148-10 E : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011)
14/30265073 DC : 0	BS EN ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 11148-11 E : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011)
09/30183554 DC : 0	BS EN ISO 11148-8 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
PREN 13236 : DRAFT 2017	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
14/30294816 DC : 0	BS EN 16713-1 - DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 11148-1 : 2012	Hand-held non-electric power tools – Safety requirements – Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
16/30338537 DC : 0	BS EN 131-3 - LADDERS - PART 3: MARKING AND USER INSTRUCTIONS
BS ISO 3864-1 : 2011	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: DESIGN PRINCIPLES FOR SAFETY SIGNS AND SAFETY MARKINGS
08/30182786 DC : DRAFT JULY 2008	BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
BS ISO 24409-1 : 2010	SHIPS AND MARINE TECHNOLOGY - DESIGN, LOCATION AND USE OF SHIPBOARD SAFETY SIGNS, SAFETY-RELATED SIGNS, SAFETY NOTICES AND SAFETY MARKINGS - PART 1: DESIGN PRINCIPLES
BS EN ISO 11148-2 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011)
11/30247811 DC : 0	BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
10/30191403 DC : 0	BS EN 131-3 - LADDERS - PART 3: SAFETY INSTRUCTIONS AND USER INFORMATION
UNI EN ISO 11148-2 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
BS EN ISO 11148-1 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011)
UNI EN ISO 11148-7 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
BS EN ISO 11148-11 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011)
18/30374371 DC : DRAFT MAY 2018	BS ISO 24409-1 - SHIPS AND MARINE TECHNOLOGY - DESIGN, LOCATION AND USE OF SHIPBOARD SAFETY SIGNS, FIRE CONTROL PLAN SIGNS, SAFETY NOTICES AND SAFETY MARKINGS - PART 1: DESIGN PRINCIPLES
CEN/CENELEC GUIDE 11 : 2012	PRODUCT INFORMATION RELEVANT TO CONSUMERS - GUIDELINES FOR STANDARD DEVELOPERS
DIN ISO 3864-3 : 2012	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS (ISO 3864-3:2012)
15/30264711 DC : 0	BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
DIN EN ISO 11148-4 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
12/30239867 DC : 0	BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
BS EN ISO 11148-3 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
BS EN 62282-3-1 : 2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
UNE EN 62282-3-1 : 2011	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
14/30302355 DC : 0	BS EN ISO 11553-1 ED.2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
BS EN ISO 11148-8 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011)
13/30267665 DC : 0	BS EN ISO 24234 - DENTISTRY - DENTAL AMALGAM
DIN EN ISO 11148-6 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
09/30203792 DC : 0	BS ISO 7010 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS
BS EN 60601-2-57 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
04/30118293 DC : DRAFT AUG 2004	ISO 3864-3 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3 - DESIGN CRITERIA FOR GRAPHICAL SYMBOLS USED IN SAFETY SIGNS
PREN 13379 : DRAFT 2016	PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
09/30183551 DC : 0	BS ISO 11148-7 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
BS EN 16740 : 2015	EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION
15/30313587 DC : 0	BS ISO 25649-2 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
UNI EN ISO 11148-1 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
BS ISO 20474-1 : 2017	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE EN 15649-2 : 2010	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
ISO 13578 : 2017	INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
BS ISO 19027 : 2016	DESIGN PRINCIPLES FOR COMMUNICATION SUPPORT BOARD USING PICTORIAL SYMBOLS
14/30302903 DC : 0	BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
UNE ISO 9244 : 2010	EARTH-MOVING MACHINERY - MACHINE SAFETY LABELS - GENERAL PRINCIPLES
14/30302359 DC : 0	BS EN ISO 11553-2 ED.2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
NBR 16200 : 2013	BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES - SAFETY REQUIREMENTS FOR CONSTRUCTION AND INSTALLATION OF LIFTS
DIN EN 16029 E : 2012	RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 16230-1 E : 2015	LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
17/30341100 DC : 0	BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
DIN EN 16740 : 2016	EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION
09/30211248 DC : 0	BS EN 16029 - RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SAFETY REQUIREMENTS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES
DIN EN 12413 : 2011	SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
10/30233949 DC : 0	BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
16/30337092 DC : DRAFT APR 2016	BS EN 13378 - PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 17080 : 2005	MANUALLY PORTABLE AGRICULTURAL AND FORESTRY MACHINES AND POWERED LAWN AND GARDEN EQUIPMENT - DESIGN PRINCIPLES FOR SINGLE-PANEL PRODUCT SAFETY LABELS
PREN 13289 : DRAFT 2015	PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 7010 : 2011	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS
08/30190505 DC : 0	BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE EN 16029 : 2013	RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
08/30183842 DC : DRAFT JUNE 2008	BS EN ISO 11148-6 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
BS ISO 9244 : 2008	EARTH-MOVING MACHINERY - MACHINE SAFETY LABELS - GENERAL PRINCIPLES
08/30183838 DC : DRAFT JUNE 2008	BS EN ISO 11148-4 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
03/105714 DC : DRAFT MAR 2003	ISO 24234 - DENTISTRY - MERCURY AND ALLOYS FOR DENTAL AMALGAM
BS EN 16029 : 2012	RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
ISO 25649-2 : 2017	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
ISO 12643-1 : 2009(R2015)	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN ISO 7010 : 2012	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011)
17/30353778 DC : 0	BS EN 474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN ISO 11148-12 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
BS ISO 20749 : 2017	DENTISTRY - PRE-CAPSULATED DENTAL AMALGAM
UNE EN 12413 : 0	SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
10/30238615 DC : DRAFT NOV 2010	BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
16/30277014 DC : DRAFT MAR 2016	BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
11/30236586 DC : 0	BS EN 16230-1 - LEISURE KART - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
17/30347375 DC : 0	BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
DIN EN ISO 11148-7 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
EN 474-1 : 2006 + A5 2018	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
09/30202307 DC : 0	BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
BS EN ISO 25649-2 : 2017	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
CSA Z1002 : 2012	OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
10/30205791 DC : 0	BS ISO 10896-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
BS EN 13236 : 2010	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
BS EN 82079-1 : 2012	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
09/30197377 DC : 0	BS ISO 3864-1 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: DESIGN PRINCIPLES FOR SAFETY SIGNS AND SAFETY MARKINGS
15/30329716 DC : 0	BS EN 13289 - PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 11148-8 E : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011)
DIN EN ISO 11148-9 : 2012	Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011); German version EN ISO 11148-9:2011
VDI 4500-4 : 2011	TECHNICAL DOCUMENTATION - DOCUMENTATION PROCESS - PLANNING, LAYOUT, CREATION
DIN ISO 3864-1 : 2012	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: DESIGN PRINCIPLES FOR SAFETY SIGNS AND SAFETY MARKINGS (ISO 3864-1:2011)
CSA C22.2 No. 60601-2-57 : 2011 : R2016	MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
BS EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN ISO 11148-4:2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
DIN EN 15649-2 : 2013	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
16/30354071 DC : 0	BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS ISO 3864-3 : 2012	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS
UNI EN ISO 11148-12 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
BS EN ISO 11148-6 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
NBR IEC 60745-1 : 2009	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
08/30183566 DC : DRAFT JUNE 2008	BS ISO 11148-3 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
DIN EN ISO 11148-7 E : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
BS EN ISO 11148-10 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011)
DIN EN ISO 11148-1 E : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011)
15/30281554 DC : 0	BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
I.S. EN 16230-1:2013	LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
15/30302205 DC : DRAFT FEB 2015	BS EN ISO 19296 - MINING AND EARTHMOVING MACHINERY - MOBILE MACHINES WORKING UNDERGROUND - MACHINE SAFETY
DIN EN 16230-1 : 2015	LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
DIN ISO 3864-1 E : 2012	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: DESIGN PRINCIPLES FOR SAFETY SIGNS AND SAFETY MARKINGS (ISO 3864-1:2011)
17/30359229 DC : DRAFT SEP 2017	BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
I.S. EN 82079-1:2012	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012 (EQV))
UNE 68112 : 2016	AGRICULTURAL AND FORESTRY MACHINERY - RIDE-ON SELF-PROPELLED WORK EQUIPMENT - DEPLOYMENT PRINCIPLES AND ASSESSMENT OF AUTOMATICALLY DEPLOYED ROLL OVER PROTECTIVE STRUCTURES
I.S. EN ISO 11148-9:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011)
CEI EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN ISO 11148-5 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011)
UNI EN ISO 10821 : 2010	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
DIN EN ISO 11148-3 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
UNI EN ISO 11148-5 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
UNI EN ISO 11148-6 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
DIN EN ISO 11148-11 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011)
06/30148660 DC : DRAFT APR 2006	ISO 9244 - EARTH-MOVING MACHINERY - SAFETY SIGNS - GENERAL PRINCIPLES
CSA Z1002 : 2012	OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
BS EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
DIN EN 16029 : 2012	RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
BIS IS/ISO 12643-1 : 2009	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE EN 16740 : 2016	EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION
BS EN 15649-2 : 2009	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
13/30278752 DC : 0	BS EN 12309-2 - GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
DIN EN ISO 11148-12 E : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012)
BS ISO 23273-3 : 2006	FUEL CELL ROAD VEHICLES - SAFETY SPECIFICATIONS - PART 3: PROTECTION OF PERSONS AGAINST ELECTRIC SHOCK
BS EN ISO 11148-7 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
DIN EN 16713-1 : 2016	DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS
UNI EN ISO 11148-8 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
UNE EN 16713-1 : 2017	DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS
15/30330735 DC : 0	BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
BS EN 60745-1 : 2009	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
18/30368743 DC : DRAFT APR 2018	BS EN 60947-6-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
BS ISO 10896-2 : 2016	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
PREN ISO 24234 : DRAFT 2013	DENTISTRY - DENTAL AMALGAM (ISO/DIS 24234:2013)
BS EN ISO 11148-9 : 2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011)
15/30301929 DC : 0	BS ISO 19027 - DESIGN PRINCIPLES FOR COMMUNICATION SUPPORT BOARD USING PICTORIAL SYMBOLS
PREN 474-1 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 80416-3 : 2003	BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
BS EN ISO 11148-4 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
ISO 3864-1 : 2011(R2016)	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: DESIGN PRINCIPLES FOR SAFETY SIGNS AND SAFETY MARKINGS
ISO/IEC GUIDE 14 : 2018	PRODUCTS AND RELATED SERVICES - INFORMATION FOR CONSUMERS
12/30258453 DC : 0	BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
09/30165797 DC : 0	BS EN 60601-2-57 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
BS EN 16713-1 : 2016	DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS
08/30189962 DC : 0	BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
UNE 23032 : 2015	FIRE SAFETY - GRAPHICAL SYMBOLS FOR USE ON PLANS: DESIGN, PROTECTION PLANS AND EVACUATION PLANS
17/30364674 DC : 0	BS EN 60947-4-2 ED.4.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
08/30189270 DC : 0	BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
CSA C22.2 No. 60601-2-57 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
07/30163456 DC : 0	BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA Z1002 : 2012 : INC : UPD 2 : 2014	OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
CSA Z1002 : 2012 : INC : UPD 2 : 2014	OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
CSA Z1002 : 2012 : INC : UPD 1 : 2013	OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
PREN 12309-2 : DRAFT 2013	GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
EN IEC 61204-7 : 2018	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS (IEC 61204-7:2016)
PREN 131-3 : DRAFT 2016	LADDERS - PART 3: MARKING AND USER INSTRUCTIONS
UNE EN ISO 25649-2 : 2018	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION (ISO 25649-2:2017)
CSA Z1002 : 2012	OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
09/30176666 DC : 0	BS EN 62079 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION
UNE EN 60947-5-5 : 1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
CEI EN 82079-1 : 2013	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
16/30328610 DC : 0	BS ISO 20749 - DENTISTRY - PRE-CAPSULATED DENTAL AMALGAM
CSA Z1002 : 2012 : R2017	OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
DIN EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
DIN EN 415-10 E : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
DIN EN ISO 11148-5 E : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011)
DIN EN ISO 11148-2 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011)
DIN EN ISO 11148-5 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011)
DIN EN ISO 11148-4 E : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
CSA Z1002 : 2012 : R2017	OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
DIN EN ISO 11148-3 E : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
UNI EN 16029 : 2012	RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
DIN ISO 3864-3 E : 2012	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS (ISO 3864-3:2012)
BS EN 16774 : 2016	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
DIN EN ISO 11148-6 E : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
NBR 16083 : 2012	MAINTENANCE FOR LIFTS, ESCALATORS AND PASSENGER CONVEYORS - RULES FOR MAINTENANCE INSTRUCTIONS
DIN EN ISO 11148-10 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011)
DIN EN ISO 11148-9 E : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011)
DIN EN ISO 11148-8 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011)
BS EN 62368-1 : 2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
ISO 23273-3 : 2006	FUEL CELL ROAD VEHICLES - SAFETY SPECIFICATIONS - PART 3: PROTECTION OF PERSONS AGAINST ELECTRIC SHOCK
DIN EN 474-1 : 2014	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 60947-5-5:1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
SAE J 115 : 2018	SAFETY SIGNS FOR OFF-ROAD WORK MACHINES
ISO/IEC GUIDE 37 : 2012	INSTRUCTIONS FOR USE OF PRODUCTS BY CONSUMERS
UNI EN ISO 11148-11 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
UNI EN 15649-2 : 2013	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
CEI EN 62368-1 : 2016	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
ISO 18758-2 : 1ED 2018	MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
I.S. EN 415-10:2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN ISO 11148-10:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011)
ISO 11148-13 : 2017	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
I.S. EN ISO 11148-8:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011)
ISO/DIS 24409-1 : 40.20 (2018)	SHIPS AND MARINE TECHNOLOGY - DESIGN, LOCATION AND USE OF SHIPBOARD SAFETY SIGNS, FIRE CONTROL PLAN SIGNS, SAFETY NOTICES AND SAFETY MARKINGS - PART 1: DESIGN PRINCIPLES
I.S. EN ISO 11148-11:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011)
I.S. EN ISO 11148-7:2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
NBR ISO 24234 : 2017	DENTISTRY - MERCURY AND ALLOYS FOR DENTAL AMALGAM
PREN 13378 : DRAFT 2016	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
ISO 17840-4 : 1ED 2018	ROAD VEHICLES - INFORMATION FOR FIRST AND SECOND RESPONDERS - PART 4: PROPULSION ENERGY IDENTIFICATION
BS EN 60947-5-5 : 1998	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICES WITH MECHANICAL LATCHING FUNCTION (IEC 60947-5-5:1997)
UNI EN ISO 11148-4 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
ISO 19027 : 2016	DESIGN PRINCIPLES FOR COMMUNICATION SUPPORT BOARD USING PICTORIAL SYMBOLS
UNI EN ISO 11148-9 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
I.S. EN ISO 11148-12:2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012)
I.S. EN ISO 11148-2:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011)
I.S. EN 60601-2-57:2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
I.S. EN 62282-3-1:2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
UNI 11023 : 2011	SELF LOADING MOBILE MIXERS - SAFETY REQUIREMENTS
BS EN 16230-1 : 2013	LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
I.S. EN 16740:2015	EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION
I.S. EN ISO 11148-1:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011)
I.S. EN ISO 7010:2012	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011)
I.S. EN 62368-1:2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
I.S. EN 62282-3-100:2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
UNI EN ISO 11148-3 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
I.S. EN 16774:2016	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
I.S. EN 62841-1:2015	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
ISO 20749 : 2017	DENTISTRY - PRE-CAPSULATED DENTAL AMALGAM
I.S. EN 16029:2012	RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
16/30338566 DC : 2016-06	BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN IEC 61204-7:2018	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
I.S. EN ISO 11148-6:2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
DIN EN ISO 7010 : 2012	GRAPHISCHE SYMBOLE - SICHERHEITSFARBEN UND SICHERHEITSZEICHEN - REGISTRIERTE SICHERHEITSZEICHEN (ISO 7010:2011/AMD 5:2014)
ISO 10896-2 : 2016	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
ISO/IEC GUIDE 41 : 2003	PACKAGING - RECOMMENDATIONS FOR ADDRESSING CONSUMER NEEDS
DIN EN 13236 : 2016	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
NBR ISO/CIE 8995-1 : 2013	LIGHTING OF WORK PLACES - PART 1: INDOOR
ISO 17846 : 2004(R2018)	WELDING AND ALLIED PROCESSES - HEALTH AND SAFETY - WORDLESS PRECAUTIONARY LABELS FOR EQUIPMENT AND CONSUMABLES USED IN ARC WELDING AND CUTTING
UNI EN ISO 11148-10 : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
EN 62368-1 : 2014 COR 2017	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
NBR IEC 60601-2-57 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
17/30364338 DC : 0	BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS
DIN EN 13236 E : 2016	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
BS EN 474-1 : 2006 : INC : AMD 6 : 2019	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60601-2-57 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
I.S. EN ISO 11148-5:2011	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011)
UNE EN 82079-1 : 2015	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
I.S. EN ISO 25649-2:2017	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION (ISO 25649-2:2017)
I.S. EN 13236:2010	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
BS EN 809:1998+A1:2009	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 131-3 : 2018	LADDERS - PART 3: MARKING AND USER INSTRUCTIONS
BS PD ISO/IEC GUIDE 37 : 2012	INSTRUCTIONS FOR USE OF PRODUCTS BY CONSUMERS
16/30333438 DC : 0	BS ISO 20297-1 - INDUSTRIAL TRUCKS - LORRY-MOUNTED TRUCKS - PART 1: SAFETY REQUIREMENTS AND VERIFICATION
DIN EN ISO 11148-12 : 2013	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012)
ISO 9244 : 2008(R2016)	EARTH-MOVING MACHINERY - MACHINE SAFETY LABELS - GENERAL PRINCIPLES
I.S. EN 16713-1:2016	DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS
BS EN 474-1 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
UNI EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 474-1:2006	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 11148-2 E : 2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011)
DIN EN 16740 E : 2016	EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION
BS EN 15494 : 2007	CANDLES - PRODUCT SAFETY LABELS
DIN EN 15649-2 E : 2013	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
EN ISO 25649-2 : 2017	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION (ISO 25649-2:2017)
UNI EN 15494 : 2008	CANDLES - PRODUCT SAFETY LABELS
ISO 3864-3 : 2012(R2017)	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS
EN 13236 : 2010 + A1 2015	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
ISO 17080 : 2005(R2014)	MANUALLY PORTABLE AGRICULTURAL AND FORESTRY MACHINES AND POWERED LAWN AND GARDEN EQUIPMENT - DESIGN PRINCIPLES FOR SINGLE-PANEL PRODUCT SAFETY LABELS
ISO 24409-1 : 2010	SHIPS AND MARINE TECHNOLOGY - DESIGN, LOCATION AND USE OF SHIPBOARD SAFETY SIGNS, SAFETY-RELATED SIGNS, SAFETY NOTICES AND SAFETY MARKINGS - PART 1: DESIGN PRINCIPLES
ISO 10896-1 : 2012	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
I.S. EN 15649-2:2009	FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
I.S. EN 80416-3:2002	BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
I.S. EN 60745-1:2009	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN ISO 11148-3:2012	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
IEC 61204-7 : 2.0	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
IEC 62368-1 : 2.0	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
ISO 20474-1 : 2017	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 131-3:2018	LADDERS - PART 3: MARKING AND USER INSTRUCTIONS
IEC 62841-1 : 2014 COR 2 2015	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 12413:2007	SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
CSA C22.2 No. 62368-1 : 2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
EN ISO 7010 : 2012 AMD 7 2017	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016)
DIN EN 13743 E : 2017	SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
DIN EN 1929-2 : 2005	BASKET TROLLEYS - PART 2: REQUIREMENTS, TESTS AND INSPECTION FOR BASKET TROLLEYS WITH OR WITHOUT A CHILD CARRYING FACILITY, INTENDED TO BE USED ON PASSENGER CONVEYORS
DIN EN 1777 E : 2010	HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
DIN EN 1777 : 2010	HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
DIN EN ISO 24234 : 2015	DENTISTRY - DENTAL AMALGAM (ISO 24234:2015)
DIN EN 1929-4 : 2005	BASKET TROLLEYS - PART 4: REQUIREMENTS AND TESTS FOR BASKET TROLLEYS WITH ADDITIONAL GOODS CARRYING FACILITY(IES), WITH OR WITHOUT A CHILD CARRYING FACILITY, INTENDED TO BE USED ON PASSENGER CONVEYORS
DIN EN ISO 24234 E : 2015	DENTISTRY - DENTAL AMALGAM (ISO 24234:2015)
DIN EN 536 E : 2016	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
DIN EN 13379 : 2016	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13378 : 2016	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 10821 E : 2013	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
UNI EN 12413 : 2011	SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
DIN EN 13977 E : 2011	RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
DIN EN ISO 11161 : 2010	SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS (ISO 11161:2007 + AMD 1:2010)
DIN EN 13289 : 2015	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 10821 : 2013	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
DIN EN 12413 E : 2011	SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
DIN EN 809 : 2012	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
DIN EN 13977 : 2011	RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
DIN EN 474-1 E : 2014	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 11553-2 E : 2009	SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
DIN EN 809 E : 2012	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
DIN EN 15095 E : 2009	POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
DIN EN 13743 : 2016	SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
DIN EN ISO 11553-2 : 2009	SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
DIN EN ISO 11161 E : 2010	SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
DIN EN 536 : 2016	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
DIN EN 13289 E : 2013	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1929-2 E : 2005	BASKET TROLLEYS - PART 2: REQUIREMENTS, TESTS AND INSPECTION FOR BASKET TROLLEYS WITH OR WITHOUT A CHILD CARRYING FACILITY, INTENDED TO BE USED ON PASSENGER CONVEYORS
UNE EN 13977 : 2012	RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
BS EN 13743 : 2017	SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
BS EN 12111 : 2014	TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
BS EN IEC 61204-7 : 2018	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS (IEC 61204-7:2016)
07/30091745 DC : 0	BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
IEC 82079-1 : 1.0	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
CSA C22.2 No. 60745.1 : 2007 : INC : UPD 3 : 2013 : R201200	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 12309-2 : 2015	GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
12/30272980 DC : 0	BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
ISO 11148-6 : 2012(R2018)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
BS EN ISO 11161 : 2007	SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
BS EN ISO 10821 : 2005	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
ISO 11148-1 : 2011(R2017)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
ISO 10821 : 2005(R2015)	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : FR	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE EN 62841-1 : 2016	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
18/30375223 DC : DRAFT APR 2018	BS EN 60947-4-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - SEMICONDUCTOR CONTROLLERS AND SEMICONDUCTOR CONTACTORS FOR NON-MOTOR LOADS
CSA C22.2 No. 60745.1 : 2007	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 15095 : 2007	POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012)
BS EN 13379 : 2001	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
UNE EN 1777 : 2011	HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
IEC 62282-3-1 : 1.0	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN 13378 : 2001	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
IEC 60745-1 : 4.0	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
ISO 11148-3 : 2012(R2018)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
ISO 11148-12 : 2012(R2018)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
DIN EN 13379 E : 2013	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
CSA C22.2 No. 0.23 : 2015	GENERAL REQUIREMENTS FOR BATTERY-POWERED APPLIANCES
DIN EN 1929-4 E : 2005	BASKET TROLLEYS - PART 4: REQUIREMENTS AND TESTS FOR BASKET TROLLEYS WITH ADDITIONAL GOODS CARRYING FACILITY(IES), WITH OR WITHOUT A CHILD CARRYING FACILITY, INTENDED TO BE USED ON PASSENGER CONVEYORS
CSA C22.2 No. 60745.1 : 2007 : INC : UPD 3 : 2013 : R201200	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60745.1 : 2007 : R2012	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 12413 : 2007	SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
BS EN 1929-4 : 2005	BASKET TROLLEYS - PART 4: REQUIREMENTS AND TESTS FOR BASKET TROLLEYS WITH ADDITIONAL GOODS CARRYING FACILITY(IES), WITH OR WITHOUT A CHILD CARRYING FACILITY, INTENDED TO BE USED ON PASSENGER CONVEYORS
BS EN 1777 : 2010	HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
CSA C22.2 No. 60745.1 : 2007 : R2012	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 13289 : 2001	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
CSA C22.2 No. 60745.1 : 2007	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 13977 : 2011	RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
ISO 11148-2 : 2011(R2017)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
ISO 11148-9 : 2011(R2017)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
CAN/CSA-C22.2 NO No. 62841-1 : 2015	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
ISO 11148-8 : 2011(R2017)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
CSA C22.2 No. 60745.1 : 2007 : R2017	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : R2012	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
IEC 80416-3 : 1.1	BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
ISO 11148-11 : 2011(R2017)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
UNE EN 60601-2-57 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
CSA C22.2 No. 60745.1 : 2007	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 12309-2 : 2016	GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
BS EN 1929-2 : 2004	BASKET TROLLEYS - PART 2: REQUIREMENTS, TESTS AND INSPECTION FOR BASKET TROLLEYS WITH OR WITHOUT A CHILD CARRYING FACILITY, INTENDED TO BE USED ON PASSENGER CONVEYORS
ISO 22734-2 : 2011	HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
ISO 11148-5 : 2011(R2017)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
ISO 24234 : 2015	DENTISTRY - DENTAL AMALGAM
IEC 60601-2-57 : 1.0	MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : R2012	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN ISO 24234 : 2004	DENTISTRY - DENTAL AMALGAM
IEC 62282-3-100 : 1.0	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN ISO 11553-2 : 2008	SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
UNE EN 12413 : 0	SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
ISO 11148-10 : 2011(R2017)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
ISO 11148-7 : 2012(R2018)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
UNE EN 80416-3 : 2003	BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
BS EN 536 : 2015	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
UL 60745-1 : 4	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
09/30150663 DC : 0	BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
ISO 11161 : 2007(R2015)	SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
UNE EN 12309-2 : 2015	GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
EN 82079-1 : 2012	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012)
CSA C22.2 No. 60745.1 : 2007 (R2017)	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
BS ISO 22734-2 : 2011	HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 15095 : 2009	POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
BS EN 62841-1 : 2015	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 13378 E : 2013	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
ISO 11148-4 : 2012(R2018)	HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
BS EN 809 : 1998	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
DIN EN 12309-2 E : 2016	GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
EN 60745-1 : 2009 AMD 11 2010	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 60745-1 : 2006	HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 809 : 1998 COR 2010	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 809:1998+A1:2009	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
UNE EN 60947-5-5 : 1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION

Standards Referencing This Book - (Show below) - (Hide below)

ISO 7010 : 2011	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS
ISO 17398 : 2004(R2018)	SAFETY COLOURS AND SAFETY SIGNS - CLASSIFICATION, PERFORMANCE AND DURABILITY OF SAFETY SIGNS
ISO/IEC GUIDE 14 : 2003	PRODUCTS AND RELATED SERVICES - INFORMATION FOR CONSUMERS
ISO/IEC GUIDE 51 : 2014	SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
ISO/IEC GUIDE 37 : 2012	INSTRUCTIONS FOR USE OF PRODUCTS BY CONSUMERS
DIN 6164-1 : 1980	DIN COLOUR CHART; SYSTEM BASED ON THE 2 DEGREE STANDARD COLORIMETRIC OBSERVER
ISO 9186-1 : 2014	GRAPHICAL SYMBOLS - TEST METHODS - PART 1: METHODS FOR TESTING COMPREHENSIBILITY
ISO 80416-2 : 2001(R2015)	BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 2: FORM AND USE OF ARROWS
ISO 3864-1 : 2011(R2016)	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: DESIGN PRINCIPLES FOR SAFETY SIGNS AND SAFETY MARKINGS
ISO 3864-3 : 2012(R2017)	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS
ISO 3864-4 : 2011(R2016)	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 4: COLORIMETRIC AND PHOTOMETRIC PROPERTIES OF SAFETY SIGN MATERIALS

Add To Cart

Product Format

Quantity

add to cart

ISO 3864-2 : 2016

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?