ISO 5598:2008
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Fluid power systems and components Vocabulary
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
02-14-2020
Language(s)
English, English - French
Published date
09-19-2008
ISO 5598:2008 establishes the vocabulary, in English, French and German, for all fluid power systems and components, excluding aerospace applications and compressed air supply installations.
| DevelopmentNote |
DRAFT ISO/DIS 5598 is also available for this standard. (03/2018)
|
| DocumentType |
Standard
|
| Pages |
177
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI ISO 5598 : 2012 | Identical |
| SAC GB/T 17446 : 1998 | Identical |
| BS ISO 5598:2008 | Identical |
| NEN ISO 5598 : 2008 | Identical |
| IS 10416 : 2019 | Identical |
| SS-ISO 5598:2008 | Identical |
| NF ISO 5598 : 2008 | Identical |
| NEN-ISO 5598 : 2020 | Identical |
| SNV ISO 5598 : 1990 | Identical |
| NBN E 48 013 : 1988 | Identical |
| NBN E 48 010 : 1987 | Identical |
| NBN E 48 009 : 1988 | Identical |
| PN 91/M-73001 : 1991 | Identical |
| BIS IS 10416 : 1992(R2002) | Identical |
| NBN E 48 100 : 1987 | Identical |
| NBN E 48 107 : 1987 | Identical |
| NBN E 48 113 : 1988 | Identical |
| NBN E 48 103 : 1988 | Identical |
| NBN E 48 008 : 1990 | Identical |
| NBN E 48 105 : 1987 | Identical |
| NBN E 48 112 : 1987 | Identical |
| NBN E 48 011 : 1987 | Identical |
| NBN E 48 111 : 1988 | Identical |
| NBN E 48 012 : 1987 | Identical |
| BS 5540-7:1991 | Evaluating particulate contamination of hydraulic fluids Method of determining the level of contamination (by the gravimetric method) |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
| BS ISO 8573-3:1999 | Compressed air Test methods for measurement of humidity |
| 99/541173 DC : DRAFT OCT 1999 | BS EN 13731 - SPECIFICATION FOR LIFTING BAGS FOR FIRE AND RESCUE SERVICE USE |
| ANSI B93.100M : 1987 | HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - METHODS OF TEST |
| NFPA T2.13.7 : 1997 : R2014 | HYDRAULIC FLUID POWER - PETROLEUM FLUIDS - PREDICTION OF BULK MODULI |
| 07/30170703 DC : DRAFT AUG 2007 | BS ISO 6099 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - IDENTIFICATION CODE FOR MOUNTING DIMENSIONS AND MOUNTING TYPES |
| NFPA T2.6.1 : 2001 : R2014 | FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER COMPONENT |
| NFPA T3.5.26 : 2000 : R2005 | HYDRAULIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC VALVE |
| 13/30265681 DC : 0 | BS ISO 10771-1 - HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 1: TEST METHOD |
| UNE-EN ISO 4414:2011 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| BS ISO 8131:1992 | Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Tolerances |
| DIN EN 14753 E : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL |
| BS ISO 4392-1:2002 | Hydraulic fluid power. Determination of characteristics of motors At constant low speed and constant pressure |
| SAE ARP 4386 : 2017 | TERMINOLOGY AND DEFINITIONS FOR AEROSPACE FLUID POWER, ACTUATION AND CONTROL TECHNOLOGIES |
| ISO 14617-15:2002 | Graphical symbols for diagrams Part 15: Installation diagrams and network maps |
| BS ISO 10770-1:2009 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for four-port directional flow-control valves |
| 05/30125061 DC : DRAFT MAR 2005 | ISO 9974-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER STUD ENDS WITH ISO 261 THREADS WITH ELASTOMER METAL-TO-METAL SEALING - PART 4: DIMENSIONS, METHODS AND REQUIREMENTS FOR EXTERNAL PORT PLUGS |
| 01/714184 DC : DRAFT OCT 2001 | ISO/DIS 15552 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - BASIC, MOUNTING AND ACCESSORIES DIMENSIONS |
| BS ISO 6981:1992 | Hydraulic fluid power. Cylinders. Rod end plain eyes. Mounting dimensions |
| NFPA T3.19.25 : 2004 : R2014 | INFORMATION REPORT - FLUID POWER SYSTEMS - SEALING DEVICES - STORAGE, HANDLING AND INSTALLATION OF ELASTOMERIC SEALS AND EXCLUSION DEVICES |
| BS ISO 19973-1:2015 | Pneumatic fluid power. Assessment of component reliability by testing General procedures |
| BS ISO 14617-2:2002 | Graphical symbols for diagrams Symbols having general application |
| ISO 3601-4:2008 | Fluid power systems — O-rings — Part 4: Anti-extrusion rings (back-up rings) |
| BS ISO 6194-2:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Vocabulary |
| 98/706004 DC : DRAFT APR 1998 | ISO/CD 3601-6 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 6: RECOMMENDED ELASTOMERIC MATERIALS |
| 13/30268516 DC : 0 | BS ISO 3320 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER BORES AND PISTON ROD DIAMETERS AND AREA RATIOS - METRIC SERIES |
| UNE-EN ISO 1179-1:2014 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
| BS 5944-6:1992 | Measurement of airborne noise from hydraulic fluid power systems and components Method of test for pumps using a parallelepiped microphone array |
| 04/104967 DC : DRAFT APR 2004 | ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
| BS ISO 11170:2013 | Hydraulic fluid power. Sequence of tests for verifying performance characteristics of filter elements |
| BS ISO 5782-2:1997 | Pnuematic fluid power. Compressed air filters Test methods to determine the main characteristics to be included in supplier\'s literature |
| ISO 4393:2015 | Fluid power systems and components Cylinders Basic series of piston strokes |
| BS ISO 17567:2005 | Agriculture and forestry tractors and implements. Hydraulic power beyond |
| PD ISO/TS 81346-3:2012 | Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations Application rules for a reference designation system |
| SAE J 1926/2 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| ISO 16589-5:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 5: Identification of visual imperfections |
| 10/30199074 DC : 0 | BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| 13/30250817 DC : 0 | BS ISO 6953-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS |
| 13/30286407 DC : 0 | BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
| BS ISO 14541:2013 | Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose |
| ISO 7789:2007 | Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities |
| 16/30328245 DC : 0 | BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80 |
| BS 7780-1:1994 | Specification for rotary shaft lip type seals Nominal dimensions and tolerances |
| ISO/TR 16194:2017 | Pneumatic fluid power Assessment of component reliability by accelerated life testing General guidelines and procedures |
| BS EN ISO 6149-1:2007 | Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Ports with truncated housing for O-ring seal |
| BS ISO 5599-2:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector |
| ISO 6301-1:2017 | Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements |
| BIS IS 8384 : 2013 | HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| 10/30198892 DC : 0 | BS EN ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| BS 7275-3:1995 | Determination of hydraulic fluid power motor characteristics Method at constant flow and at constant torque |
| 09/30199986 DC : 0 | BS ISO 15524 - PNEUMATIC FLUID POWER - SINGLE ROD SHORT STROKE CYLINDERS |
| ANSI B93.82M : 87(R1993) | HYDRAULIC FLUID POWER - FILTERS - STATEMENT OF REQUIREMENTS |
| 98/711905 DC : DRAFT AUG 1998 | ISO/CD 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
| ISO/TR 19972-1:2009 | Hydraulic fluid power Methods to assess the reliability of hydraulic components Part 1: General procedures and calculation method |
| BS ISO 8434-1 : 94 AMD 9583 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE COMPRESSION FITTINGS |
| 08/30178054 DC : DRAFT FEB 2008 | BS EN ISO 12922 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| SAE J 2614 : 2018 | WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING |
| 14/30270986 DC : 0 | BS ISO 12829 - HYDRAULIC SPIN-ON FILTERS WITH FINITE LIVES - METHOD FOR VERIFYING THE RATED FATIGUE LIFE AND THE RATED STATIC BURST PRESSURE OF THE PRESSURE-CONTAINING ENVELOPE |
| ISO 16031-2:2003 | Aerospace fluid systems O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes Part 2: Standard tolerances for non-hydraulic systems |
| 05/30098238 DC : 0 | ISO 21081-2 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 2: FILTER BLOCKAGE TECHNIQUE |
| 08/30176286 DC : DRAFT JAN 2008 | BS ISO 6358-3 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 3: DISCHARGE TEST AS AN ALTERNATE TEST METHOD |
| BS ISO 11158:2009 | Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG |
| DIN ISO 12238 E : 2005 | PNEUMATIC FLUID POWER - DIRECTIONAL CONTROL VALVES - MEASUREMENT OF SHIFTING TIME |
| BS ISO 16908:2014 | Hydraulic filter element test methods. Thermal conditioning and cold start-up simulation |
| DIN ISO 12151-3 E : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS (ISO 12151-3:2010) |
| BS ISO 10372:1992 | Hydraulic fluid power. Four-and five-port servovalves. Mounting surfaces |
| 13/30258990 DC : 0 | BS ISO 16908 - HYDRAULIC FILTER ELEMENT TEST METHODS - THERMAL CONDITIONING AND COLD START-UP SIMULATION |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| BS ISO 10762:2015 | Hydraulic fluid power. Mounting dimensions for cylinders, 10 MPa (100 bar) series |
| BS ISO 16431:2012 | Hydraulic fluid power. System clean-up procedures and verification of cleanliness of assembled systems |
| DIN ISO 6149-3:1996-11 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| 12/30243465 DC : 0 | BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| 98/714983 DC : DRAFT SEP 1998 | ISO/CD 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: EXTERNAL HEX AND INTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| BS EN 50353:2001 | Insulating oil. Determination of fibre contamination by the counting method using a microscope |
| BS ISO 5596:1999 | Hydraulic fluid power. Gas-loaded accumulators with separator. Ranges of pressures and volumes and characteristic quantities |
| BS 7389-1:1990 | Pneumatic fluid power valve mounting surfaces Specification for five-port directional control valves (without electrical connector) |
| NFPA T3.21.3 : 2008 : R2013 | PNEUMATIC FLUID POWER - FLOW RATING TEST PROCEDURE AND REPORTING METHOD - FOR FIXED ORIFICE COMPONENTS |
| BS ISO 12151-2:2003 | Connections for hydraulic fluid power and general use — Hose fittings Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings |
| 03/313810 DC : 0 | EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| BS ISO 14085-6:2015 | Aerospace series. Hydraulic filter elements. Test methods Initial cleanliness level |
| DIN ISO 10100 E : 2013 | HYDRAULIC FLUID POWER - CYLINDERS - ACCEPTANCE TEST (ISO 10100:2001 + AMD.1:2012) |
| 07/19969755 DC : 0 | BS ISO 11500 - HYDRAULIC FLUID POWER - DETERMINATION OF PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT EXTINCTION PRINCIPLE |
| BS ISO 15086-1:2001 | Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems Hydraulic fluid power. Determination of the fluid borne noise characteristics of components and systems. Introduction |
| BS ISO 8434-2:2007 | Metallic tube connections for fluid power and general use 37° flared connectors |
| 04/30098195 DC : DRAFT JUL 2004 | ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES |
| 00/715331 DC : 0 | ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| BS ISO 11011 : 2013 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT |
| 13/30276381 DC : 0 | BS ISO 3601-5 - FLUID POWER SYSTEMS - O-RINGS - PART 5: SPECIFICATION OF ELASTOMERIC MATERIALS FOR INDUSTRIAL APPLICATIONS |
| BS ISO 14085-3:2015 | Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity |
| 17/30347219 DC : 0 | BS ISO 6099 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - IDENTIFICATION CODE FOR MOUNTING DIMENSIONS AND MOUNTING TYPES |
| BS ISO 7425-1:1988 | Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerances Piston seal housings |
| DIN ISO/TS 16952-1:2007-03 | TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 1: GENERAL APPLICATION RULES |
| ISO 12151-3:2010 | Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| 05/30032019 DC : DRAFT SEP 2005 | ISO 6194-1 - ROTARY SHAFT LIP TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| NFPA T3.21.20 : 2007 : R2012 | PNEUMATIC FLUID POWER - ELECTRICAL CONNECTIONS FOR VALVE ISLANDS - CORRESPONDENCE BETWEEN SOLENOIDS AND ELECTRICAL CONNECTOR PINS AND SOCKETS |
| PD ISO/TR 17165-2:2006 | Hydraulic fluid power. Hose assemblies Recommended practices for hydraulic hose assemblies |
| BS ISO 14617-5:2002 | Graphical symbols for diagrams Measurement and control devices |
| 13/30271038 DC : 0 | BS ISO 14085-4 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 4: VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| BS ISO 10770-3:2007 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for pressure control valves |
| 14/30280597 DC : 0 | BS ISO 1219-3 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS |
| PD ISO/TR 19972-1:2009 | Hydraulic fluid power. Methods to assess the reliability of hydraulic components General procedures and calculation method |
| 98/714984 DC : DRAFT SEP 1998 | ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS |
| 18/30333968 DC : 0 | BS ISO 8573-4 - COMPRESSED AIR - CONTAMINANT MEASUREMENT - PART 4: PARTICLE CONTENT |
| BS 7780-5:1994 | Specification for rotary shaft lip type seals Identification of visual imperfections |
| 07/30144376 DC : 0 | BS ISO 3601-4 - FLUID POWER SYSTEMS - O-RINGS - PART 4: ANTI-EXTRUSION RINGS (BACK-UP RINGS) |
| BS 4575-2:1987 | Fluid power transmission and control systems Code of practice for pneumatic equipment and systems |
| BS ISO 15217:2000 | Fluid power systems and components. 16mm square electrical connector with earth contact. Characteristics and requirements |
| 09/30171027 DC : 0 | BS ISO 11171 - HYDRAULIC FLUID POWER - CALIBRATION OF AUTOMATIC PARTICLE COUNTERS FOR LIQUIDS |
| ISO 13726:2008 | Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions |
| 96/709825 DC : DRAFT JUL 1996 | ISO/CD 6164-2 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 2: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURES OF 31,5 MPA (315 BAR) TO 40 MPA (400 BAR), DN 10 TO DN 80 |
| BS ISO 3322:1985 | Fluid power systems and components. Cylinders. Nominal pressures |
| BS ISO 6022:2006 | Hydraulic fluid power. Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series |
| BS ISO 10946:1999 | Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports |
| BS 6494-4:1989 | Hydraulic fluid power valve mounting surfaces. Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves |
| NFPA T3.21.8 : 2008 : R2013 | PNEUMATIC FLUID POWER - MEASUREMENT OF RESPONSE TIME - DIRECTIONAL CONTROL VALVES |
| BS EN 14753:2007 | Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel |
| BS EN ISO 1179-3:2008 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| 09/30196757 DC : 0 | BS ISO 10041-2 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC FLOW RATE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINATE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE FOR THREE-PORT CONTROL VALVES |
| 01/714272 DC : 0 | ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS |
| 06/30128831 DC : DRAFT MAR 2006 | ISO 6020-1 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 1: MEDIUM SERIES |
| NF ISO 5596 : 2000 | HYDRAULIC FLUID POWER - GAS-LOADED ACCUMULATORS WITH SEPARATOR - RANGES OF PRESSURES AND VOLUMES AND CHARACTERISTIC QUANTITIES |
| 05/30075032 DC : DRAFT AUG 2005 | ISO 23181 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - DETERMINATION OF RESISTANCE TO FLOW FATIGUE USING HIGH VISCOSITY FLUID |
| NFPA T3.28.9 : 1989 : R2009 | FLUID POWER SYSTEMS AND PRODUCTS - MOVING PARTS FLUID CONTROLS - METHOD OF DIAGRAMMING |
| 00/715333 DC : 0 | ISO/CD 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| NFPA T3.19.7 : 1978 : R2012 | CAVITY DIMENSIONS FOR FLUID POWER EXCLUSION DEVICES (INCH SERIES) |
| BS ISO 12151-5:2007 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-2 37° flared ends |
| SAE J 356 : 2013 | WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING |
| BS ISO 6194-5:2008 | Rotary-shaft lip-type seals incorporating elastomeric sealing elements Identification of visual imperfections |
| 02/712438 DC : DRAFT OCT 2002 | ISO/DIS 21287 - PNEUMATIC FLUID POWER - CYLINDERS - COMPACT CYLINDERS, 1000 KPA (10 BAR) SERIES, BORES FROM 20 MM TO 100 MM |
| NFPA T3.28.9 : 1989 | FLUID POWER SYSTEMS AND PRODUCTS - MOVING PARTS FLUID CONTROLS - METHOD OF DIAGRAMMING |
| 05/30125053 DC : DRAFT MAY 2005 | ISO 6301-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR LUBRICANTS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN THE SUPPLIERS LITERATURE |
| NF ISO 7241-1 : 2001 | HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 1: DIMENSIONS AND REQUIREMENTS |
| DIN EN ISO 4413:2011-04 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| NFPA T3.19.7 : 1978 : R2007 | CAVITY DIMENSIONS FOR FLUID POWER EXCLUSION DEVICES (INCH SERIES) |
| UNE-EN ISO 4413:2011 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| DIN ISO 6022 E : 2008 | HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES |
| NFPA T3.21.8 : 2008 | PNEUMATIC FLUID POWER - MEASUREMENT OF RESPONSE TIME - DIRECTIONAL CONTROL VALVES |
| ISO 12669:2017 | Hydraulic fluid power — Method for determining the required cleanliness level (RCL) of a system |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| NFPA T2.6.1 : 2001 : R2009 | FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER COMPONENT |
| ISO 10770-2:2012 | Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for three-port directional flow-control valves |
| ISO 3938:1986 | Hydraulic fluid power — Contamination analysis — Method for reporting analysis data |
| NFPA T3.19.18 : 2009 | FLUID POWER - SEALING DEVICES - GROOVE DIMENSIONS FOR RADIAL COMPRESSION TYPE PISTON RINGS |
| SAE J 1298 :2010(S2017) | CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC PORT SIZES AND LOCATIONS |
| SAE J 526 : 2016 | WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING |
| ISO 14743:2004 | Pneumatic fluid power Push-in connectors for thermoplastic tubes |
| I.S. EN ISO 6149-1:2007 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL |
| BS EN ISO 4414:2010 | Pneumatic fluid power. General rules and safety requirements for systems and their components |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| ISO 7180:1986 | Pneumatic fluid power Cylinders Bore and port thread sizes |
| ISO 15171-2:2016 | Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure |
| ISO 21018-3:2008 | Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 3: Use of the filter blockage technique |
| NFPA T3.6.29 : 2000 : R2009 | TIE ROD OR BOLTED CYLINDER - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TIE ROD OR BOLTED CYLINDER |
| BS ISO 10100 : 2001 | HYDRAULIC FLUID POWER - CYLINDERS - ACCEPTANCE TESTS |
| ANSI B93.60M : 82(R1995) | FLUID POWER SYSTEMS AND PRODUCTS - CONNECTORS AND ASSOCIATED COMPONENTS - NOMINAL PRESSURES, |
| ISO 15217:2000 | Fluid power systems and components 16 mm square electrical connector with earth contact Characteristics and requirements |
| ISO 1219-2:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
| ISO 1219-3:2016 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams |
| NFPA T3.12.10 : 2000 : R2009 | AIR LINE FILTER, REGULATOR AND/OR LUBRICATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER FRL |
| ISO/IEC 80079-38:2016 | Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines |
| ISO 6195:2013 | Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances |
| ISO 6194-3:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 3: Storage, handling and installation |
| ISO 17165-1:2007 | Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements |
| BS ISO 6358-2:2013 | Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids Alternative test methods |
| BS ISO 3601-1:2012 | Fluid power systems. O-rings Inside diameters, cross-sections, tolerances and designation codes |
| ISO 4404:1998 | Petroleum and related products Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems |
| ISO 21287:2004 | Pneumatic fluid power — Cylinders — Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| ISO 14617-10:2002 | Graphical symbols for diagrams Part 10: Fluid power converters |
| NFPA T3.21.4 : 2000 : R2005 | PNEUMATIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PNEUMATIC VALVE |
| BIS IS 10187 : 2013 | HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES |
| ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
| ISO 14541:2013 | Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose |
| DIN EN ISO/IEC 80079-38:2012-08 (Draft) | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
| SAE J 1779 : 2013 | SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEM DESIGN CRITERIA FOR MARINE VEHICLES |
| ISO 15086-3:2008 | Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance |
| ISO 10372:1992 | Hydraulic fluid power — Four- and five-port servovalves — Mounting surfaces |
| ISO 14617-4:2002 | Graphical symbols for diagrams Part 4: Actuators and related devices |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| DIN EN 12409:2011-12 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| DIN EN ISO 13849-2:2013-02 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012) |
| DIN EN 14359 E : 2017 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| PD ISO/TR 10771-2:2008 | Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Rating method |
| BS ISO 27407:2010 | Hydraulic fluid power. Marking of performance characteristics on hydraulic filters |
| PD ISO/TR 15640:2011 | Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters |
| BS EN 13731:2007 | Lifting bag systems for fire and rescue service use. Safety and peformance requirements |
| UNE-EN ISO 19879:2010 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
| UNE-EN ISO 13849-2:2013 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| BS EN ISO 8434-4:2000 | Metallic tube connections for fluid power and general use 24° cone connectors with O-ring weld-on nipples |
| BS EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| BS ISO 12829:2016 | Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope |
| BS ISO 6358-3:2014 | Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids Method for calculating steady-state flow-rate characteristics of systems |
| DIN ISO 12238:2005-12 | Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001) |
| DIN EN 13731:2008-02 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
| DIN ISO 4395:2011-05 | Fluid power systems and components - Cylinder piston rod end types and dimensions (ISO 4395:2009 + Cor. 1:2010) |
| DIN ISO 10763:2004-03 | Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:1994) |
| EN ISO 19879:2010 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| DIN EN 982:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| EN 13135-2:2004+A1:2010 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| DIN ISO 12151-2:2004-01 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24? cone connector ends with O-rings (ISO 12151-2:2003) |
| EN 12409:2008+A1:2011 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| DIN EN ISO 8434-1:2008-02 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN ISO 6022:2008-06 | HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES |
| DIN ISO 21287:2005-12 | Pneumatic fluid power - Cylinders - Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm (ISO 21287:2004) |
| ONORM EN ISO 1179-2 : 2014 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013) |
| ISO 16589-1:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances |
| DIN ISO 6149-2:1996-11 | PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| 08/30179131 DC : DRAFT SEP 2008 | BS ISO 12500-4 - FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 4: WATER |
| 09/30196753 DC : 0 | BS ISO 10041-1 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC FLOW RATE CONTROL VALVES - PART 1: MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE FOR THREE-PORT CONTROL VALVES |
| I.S. EN ISO 8434-1:2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| ISO 7425-1:1988 | Hydraulic fluid power Housings for elastomer-energized, plastic-faced seals Dimensions and tolerances Part 1: Piston seal housings |
| 12/30260519 DC : 0 | BS EN ISO 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO/DIS 1179-1:2012) |
| BS ISO 10767-1:2015 | Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Method for determining source flow ripple and source impedance of pumps |
| 04/30022943 DC : DRAFT NOV 2004 | BS ISO 12500-2 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 2: OIL VAPOURS |
| DIN ISO 6149-1:1996-11 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH O-RING SEAL IN TRUNCATED HOUSING |
| BS ISO 14085-4:2015 | Aerospace series. Hydraulic filter elements. Test methods Verification of collapse/burst pressure rating |
| BS ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures |
| BS ISO 6149-3:1993 | Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Light-duty (L series) stud ends. Dimensions, design, test methods and requirements |
| ANSI B93.84M : 1987 | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - IDENTIFICATION CODE FOR MOUNTING DIMENSIONS AND MOUNTING TYPES, |
| ISO 4407:2002 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
| ISO 20155:2017 | Ships and marine technology — Test method of flow induced in-pipe noise source characteristics for a ship-used pump |
| ISO 8573-8:2004 | Compressed air — Part 8: Test methods for solid particle content by mass concentration |
| SAE J 2337-3 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| BS ISO 6020-1:2007 | Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Medium series |
| 07/30173477 DC : 0 | BS ISO 4395 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER PISTON ROD END TYPES AND DIMENSIONS |
| 00/707842 DC : DRAFT APR 2000 | ISO/CD 17559 - HYDRAULIC FLUID POWER - TEST METHOD FOR ELECTRICITY CONTROLLED OIL HYDRAULIC PUMPS |
| NFPA T2.13.7 : 1997 : R2009 | HYDRAULIC FLUID POWER - PETROLEUM FLUIDS - PREDICTION OF BULK MODULI |
| BS ISO 6301-1:2017 | Pneumatic fluid power. Compressed-air lubricators Main characteristics to be included in supplier\'s literature and product-marking requirements |
| 07/30144370 DC : 0 | BS ISO 3601-1 - FLUID POWER SYSTEMS - O-RINGS - PART 1: INSIDE DIAMETERS, CROSS-SECTIONS, TOLERANCES AND DESIGNATION CODES |
| 16/30266482 DC : 0 | BS ISO 12669 - HYDRAULIC FLUID POWER - METHOD FOR DETERMINING THE REQUIRED CLEANLINESS LEVEL (RCL) FOR A SYSTEM |
| BS ISO 8136:1986 | Hydraulic fluid power. Single rod cylinders, 160 bar (16 MPa) medium series. Port dimensions |
| 04/19993045 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| NF ISO 7241-2 : 2001 | HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 2: TEST METHODS |
| BS 5540-8:1991 | Evaluating particulate contamination of hydraulic fluids Method of determining the level of contamination (by the counting method using a microscope) |
| NF ISO 5599-1 : 2002 | PNEUMATIC FLUID POWER - FIVE-PORT DIRECTIONAL CONTROL VALVES - PART 1: MOUNTING INTERFACES WITHOUT ELECTRICAL CONNECTOR |
| NF ISO 16873 : 2012 | HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES |
| ISO 8135:1999 | Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series Tolerances |
| BS ISO 8132:2014 | Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series |
| BS ISO 3601-5:2015 | Fluid power systems. O-rings Specification of elastomeric materials for industrial applications |
| ISO 4401:2005 | Hydraulic fluid power — Four-port directional control valves — Mounting surfaces |
| ISO 4409:2007 | Hydraulic fluid power Positive-displacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance |
| BS ISO 15407-2:2003 | Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector |
| ISO 10945:1994 | Hydraulic fluid power Gas-loaded accumulators Dimensions of gas ports |
| 01/714274 DC : 0 | ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| 16/30290140 DC : 0 | BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| BS ISO 8573-9:2004 | Compressed air Test methods for liquid water content |
| BS ISO 11727:1999 | Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components |
| BS ISO 14540:2013 | Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar) |
| ISO 8136:1986 | Hydraulic fluid power Single rod cylinders, 160 bar (16 MPa) medium series Port dimensions |
| 11/30182572 DC : 0 | BS ISO 11011 - COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT |
| BS ISO 19973-2:2015 | Pneumatic fluid power. Assessment of component reliability by testing Directional control valves |
| 05/30135789 DC : DRAFT JUL 2005 | EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| BS ISO 2941:2009 | Hydraulic fluid power. Filter elements. Verification of collapse/burst pressure rating |
| BS 7250:1989 | Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors |
| BS ISO 15086-2:2000 | Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems Measurement of speed of sound in a fluid in a pipe |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
| BS ISO 8426:2008 | Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity |
| 07/30158997 DC : 0 | BS EN 13731 - LIFTING BAG SYSTEMS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| DIN ISO 10100:2013-07 | Hydraulic fluid power - Cylinders - Acceptance tests (ISO 10100:2001 + Amd.1:2012) |
| BS EN ISO 1179-1:2013 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Threaded ports |
| ISO 16908:2014 | Hydraulic filter element test methods Thermal conditioning and cold start-up simulation |
| 14/30287215 DC : 0 | BS ISO 18869 - HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS |
| BS ISO 10041-1:2010 | Pneumatic fluid power. Electro-pneumatic continuous flow control valves Main characteristics to include in the supplier\'s literature |
| 07/30131653 DC : 0 | BS ISO 6194-2 - ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 2: VOCABULARY |
| 14/30287198 DC : 0 | BS ISO 15171-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 2: COUPLING FOR CONNECTION UNDER PRESSURE |
| PD ISO/TR 16194:2017 | Pneumatic fluid power. Assessment of component reliability by accelerated life testing. General guidelines and procedures |
| BS ISO 12151-6:2009 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-6 60° cone ends |
| 11/30232899 DC : 0 | BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76 |
| 08/30186852 DC : DRAFT JULY 2008 | BS EN ISO 4413 - HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
| 07/30131661 DC : DRAFT DEC 2007 | BS ISO 6194-3 - ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 3: STORAGE, HANDLING AND INSTALLATION |
| BS 7201-2:1995 | Hydraulic fluid power. Gas loaded accumulators Dimensions of gas ports |
| BS ISO 1219-1 : 2012 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 1: GRAPHICAL SYMBOLS FOR CONVENTIONAL USE AND DATA-PROCESSING APPLICATIONS |
| BS ISO 6149-4 : 2006 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| BS ISO 6020-2:2015 | Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series |
| BS ISO 8573-4:2001 | Compressed air Test methods for solid particle content |
| NF ISO 15217 : 2002 | FLUID POWER SYSTEMS AND COMPONENTS - 16 MM SQUARE ELECTRICAL CONNECTOR WITH EARTH CONTACT - CHARACTERISTICS AND REQUIREMENTS |
| BS ISO 6149-2:1993 | Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements. |
| 05/30135258 DC : DRAFT JUN 2005 | ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS AND ELASTOMERIC SEALING (TYPE E) |
| BS ISO 10767-3:1999 | Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Method for motors |
| ONORM EN ISO 8434-1 : 2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| 10/30204467 DC : 0 | BS ISO 16589-2 - ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 2: VOCABULARY |
| BS ISO 20155:2017 | Ships and marine technology. Test method of flow induced in-pipe noise source characteristics for a ship-used pump |
| 15/30295265 DC : 0 | BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| 06/30128838 DC : DRAFT MAR 2006 | ISO 13726 - HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM - ACCESSORY MOUNTING DIMENSIONS |
| BS ISO 14085-5:2015 | Aerospace series. Hydraulic filter elements. Test methods Resistance to flow fatigue |
| 07/30144373 DC : 0 | BS ISO 3601-2 - FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS |
| ISO 15171-1:1999 | Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 1: Coupling not for connection under pressure |
| UNI ISO 12151-6 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS |
| NF ISO 8573-9 : 2004 | COMPRESSED AIR - PART 9: TEST METHODS FOR LIQUID WATER CONTENT |
| ISO 6358-2:2013 | Pneumatic fluid power Determination of flow-rate characteristics of components using compressible fluids Part 2: Alternative test methods |
| NF ISO 8573-5 : 2003 | COMPRESSED AIR - PART 5: TEST METHOD FOR OIL VAPOUR AND ORGANIC SOLVENT CONTENT |
| 05/30135256 DC : DRAFT JUN 2005 | ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS |
| BS EN ISO 11011:2015 | Compressed air. Energy efficiency. Assessment |
| 04/30116417 DC : DRAFT JUL 2004 | ISO 8133 - HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES - ACCESSORY MOUNTING DIMENSIONS |
| NF ISO 12500-3 : 2009 | FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES |
| BS ISO 16589-3:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Storage, handling and installation |
| 17/30366640 DC : 0 | BS ISO 14743 - PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES |
| BS ISO 14085-1:2015 | Aerospace series. Hydraulic filter elements. Test methods Test sequence |
| 07/30163202 DC : 0 | BS ISO 12151-3 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| BS ISO 14617-9:2002 | Graphical symbols for diagrams Pumps, compressors and fans |
| BS ISO 8573-8:2004 | Compressed air Test methods for solid particle content by mass concentration |
| BS ISO 8138:1998 | Hydraulic fluid power. Single rod cylinders, 16 MPA (160 bar) compact series. Port dimensions |
| 17/30327539 DC : 0 | BS ISO 18582-2 - FLUID POWER - SPECIFICATIONS OF REFERENCE DICTIONARY - PART 2: CLASSES' AND PROPERTIES' DEFINITIONS FOR PNEUMATICS |
| DIN EN ISO 1179-1:2014-03 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
| ISO 12500-3:2009 | Filters for compressed air Test methods Part 3: Particulates |
| 14/30273508 DC : 0 | BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
| 06/30032027 DC : DRAFT MAY 2006 | ISO 6194-5 - ROTARY SHAFT LIP TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 5: IDENTIFICATION OF VISUAL IMPERFECTIONS |
| NFPA T2.13.5 : 1991 : R2012 | HYDRAULIC FLUID POWER - INDUSTRIAL SYSTEMS - PRACTICE FOR THE USE OF HIGH WATER CONTENT FLUIDS |
| BS ISO 6020-3:2015 | Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series with bores from 250 mm to 500 mm |
| ANSI B93.111M : 87(R1994) | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - HOUSING FOR ROD WIPER RINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES, |
| I.S. EN ISO 1179-4:2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| 08/30184322 DC : DRAFT JUNE 2008 | BS ISO 8140 - PNEUMATIC FLUID POWER - CYLINDERS, 1000 KPA (10 BAR) SERIES - MOUNTING DIMENSIONS OF ROD END CLEVIS |
| NFPA T3.21.3 : 2008 | PNEUMATIC FLUID POWER - FLOW RATING TEST PROCEDURE AND REPORTING METHOD - FOR FIXED ORIFICE COMPONENTS |
| ANSI B93.105M : 1987 | HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS 160 BAR (16 MPA) MEDIUM AND 250 BAR (25 MPA) SERIES - TOLERANCES, |
| NFPA T3.21.20 : 2007 | PNEUMATIC FLUID POWER - ELECTRICAL CONNECTIONS FOR VALVE ISLANDS - CORRESPONDENCE BETWEEN SOLENOIDS AND ELECTRICAL CONNECTOR PINS AND SOCKETS |
| BS ISO 3019-2:2001 | Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Metric series |
| BS 6494-6:1989 | Hydraulic fluid power valve mounting surfaces Specification for pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves |
| BS ISO 17559:2003 | Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics |
| 05/30125047 DC : DRAFT JAN 2005 | ISO 19973-3 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 3: PISTON ROD CYLINDERS |
| 09/30196683 DC : 0 | BS ISO 10094-1 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC PRESSURE CONTROL VALVES - PART 1: MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
| DIN EN ISO 4414:2011-04 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| SAE J 525 : 2016 | WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| DIN ISO 6195 E : 2009 | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
| BS ISO 16589-1 : 2011 | ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| SAE J 1065 : 2016 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| ISO 4397:2011 | Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes |
| ISO 16431:2012 | Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled systems |
| SAE J 1235 : 2015 | MEASURING AND REPORTING THE INTERNAL LEAKAGE OF A HYDRAULIC FLUID POWER VALVE |
| ISO 6022:2006 | Hydraulic fluid power — Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| UNI ISO 12151-5 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 5: HOSE FITTINGS WITH ISO 8434-2 37 DEGREE FLARED ENDS |
| NF ISO 16028 : 2001 AMD 1 2006 | HYDRAULIC FLUID POWER - FLUSH-FACE TYPE, QUICK-ACTION COUPLINGS FOR USE AT PRESSURES OF 20 MPA (200 BAR) TO 31,5 MPA (315 BAR) - SPECIFICATIONS |
| ISO 14085-3:2015 | Aerospace series Hydraulic filter elements Test methods Part 3: Filtration efficiency and retention capacity |
| ISO 16902-1:2003 | Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps |
| SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
| ANSI B93.94M : 1987 | FLUID POWER SYSTEMS AND COMPONENTS - THREE-PIN ELECTRICAL PLUG CONNECTOR - CHARACTERISTICS AND REQUIREMENTS |
| BS EN ISO/IEC 80079-38 : 2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016) |
| BS ISO 8434-3:2005 | Metallic tube connections for fluid power and general use O-ring face seal connectors |
| BS ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
| ISO 11170:2013 | Hydraulic fluid power — Sequence of tests for verifying performance characteristics of filter elements |
| ISO 12151-5:2007 | Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends |
| BS ISO 12151-1 : 2010 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| I.S. EN ISO 1179-1:2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO 1179-1:2013) |
| DIN ISO 1219-2:1996-11 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
| ISO 2944:2000 | Fluid power systems and components — Nominal pressures |
| PD ISO/TS 17165-2:2013 | Hydraulic fluid power. Hose assemblies Practices for hydraulic hose assemblies |
| ISO 8138:1998 | Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series Port dimensions |
| ISO 5599-1:2001 | Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector |
| ISO 3857-4:2012 | Compressors, pneumatic tools and machines — Vocabulary — Part 4: Air treatment |
| ISO 3723:2015 | Hydraulic fluid power Filter elements Method for end load test |
| ISO 6149-1:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal |
| ISO 14540:2013 | Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar) |
| BS ISO 8133:2014 | Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| SAE J 1502 : 2013 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC |
| UNE-EN ISO 6149-4:2017 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| ISO 6953-1:2015 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements |
| ANSI B93.107M : 1987 | |
| ANSI B93.17M : 79(R1994) | MULTIPLE LIP PACKING SETS, METHODS FOR MEASURING STACK HEIGHTS, |
| UNI ISO 8434-2 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS |
| NF ISO 4395 : 2009 | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER PISTON ROD END TYPES AND DIMENSIONS |
| DIN EN ISO 8434-1:2016-10 (Draft) | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| ISO 20401:2017 | Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors |
| EN ISO 6149-4:2017 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017) |
| ISO/TR 17209:2013 | Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities with ISO 725 (UN and UNF) threads |
| ISO/TS 16952-1:2006 | Technical product documentation Reference designation system Part 1: General application rules |
| BS EN ISO 8434-1:2007 | Metallic tube connections for fluid power and general use 24 degree cone connectors |
| ISO 15218:2003 | Pneumatic fluid power — 3/2 solenoid valves — Mounting interface surfaces |
| ISO 10771-1:2015 | Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 1: Test method |
| DIN EN ISO 12922:2013-04 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN ISO 19879 E : 2011 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| DIN EN 14681:2010-10 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010) |
| DIN EN 14359:2011-04 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| BS EN ISO 9974-1:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports |
| BS ISO 17082:2004 | Pneumatic fluid power. Valves. Data to be included in supplier literature |
| UNE-EN ISO 4404-1:2012 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012) |
| ISO 4404-1:2012 | Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids |
| BS EN ISO 13849-2:2012 | Safety of machinery. Safety-related parts of control systems Validation |
| 08/30170008 DC : DRAFT SEP 2008 | BS ISO 27407 - HYDRAULIC FLUID POWER - MARKING OF PERFORMANCE CHARACTERISTICS ON HYDRAULIC FILTERS |
| UNE-EN 13135-2:2005 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| I.S. EN ISO 13849-2:2012 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012) |
| I.S. EN ISO 4404-1:2012 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
| DIN EN ISO 6149-1:2007-05 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 12409:2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 14681:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| I.S. EN ISO 19879:2010 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| I.S. EN 14359:2017 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| I.S. EN 13204:2016 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| BS 6361:1988 | Specification for three-pin plug connectors for electrically controlled fluid power equipment |
| BS 5540-2:1992 | Evaluating particulate contamination of hydraulic fluids Method of calibrating liquid automatic particle-count instruments (using AC Fine Test Dust contaminant) |
| BS 5944-1:1992 | Measurement of airborne noise from hydraulic fluid power systems and components Method of test for pumps |
| BS 5944-2:1992 | Measurement of airborne noise from hydraulic fluid power systems and components Method of test for motors |
| BS 4832:1987 | Specification for compatibility between elastomeric materials and hydraulic fluids |
| BS 4062-2:1990 | Valves for hydraulic fluid power systems Methods for determining performance |
| 07/30165998 DC : 0 | BS ISO 6301-1 - PNEUMATIC FLUID POWER - COMPRESSED-AIR LUBRICATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER'S LITERATURE AND PRODUCT-MARKING REQUIREMENTS |
| BS ISO 21018-1:2008 | Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid General principles |
| BS ISO 23309:2007 | Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing |
| BS 7296-1:1990 | Cavities for hydraulic fluid power cartridge valves Specification for two-port slip-in valves |
| DIN ISO 3601-2:2010-08 | Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008) |
| NFPA T3.12.10 : 2000 : R2014 | AIR LINE FILTER, REGULATOR AND/OR LUBRICATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER FRL |
| 13/30294752 DC : 0 | BS ISO 19973-3 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 3: CYLINDERS WITH PISTON ROD |
| 00/716535 DC : DRAFT NOV 2000 | ISO/CD 20401 - FLUID POWER SYSTEMS - DIRECTIONAL CONTROL VALVES - SPECIFICATION OF PIN ASSIGNMENT FOR ELECTRICAL ROUND CONNECTORS OF DIAMETERS 8 MM AND 12 MM |
| SAE J 524 : 2016 | SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| DIN ISO 7368:1994-02 | HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES |
| BS ISO 14617-10:2002 | Graphical symbols for diagrams Fluid power converters |
| BS ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures |
| SAE J 2658 : 2013 | CARBON AND STEEL ALLOY TUBE CONDUCTOR ASSEMBLIES FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER METALLIC TUBE ASSEMBLIES |
| NF EN ISO 4414 : 2011 | PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
| 16/30330392 DC : 0 | BS ISO 20401 - PNEUMATIC FLUID POWER SYSTEMS - DIRECTIONAL CONTROL VALVES - SPECIFICATION OF PIN ASSIGNMENT FOR ELECTRICAL ROUND CONNECTORS OF DIAMETERS 8 MM AND 12 MM |
| 13/30271041 DC : 0 | BS ISO 14085-5 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 5: RESISTANCE TO FLOW FATIGUE |
| BS ISO 16031-2:2003 | Aerospace fluid systems. O-Rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes Standard tolerances for non-hydraulic systems |
| ISO 10763:1994 | Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures |
| 09/30199060 DC : 0 | BS ISO 11926-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| 01/714275 DC : 0 | ISO/DIS 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| 96/709826 DC : DRAFT JUL 1996 | ISO/CD 6164-1 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 1: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURE OF 25MPA (250 BAR) TO 35 MPA (350 BAR), DN 10 TO DN 63 |
| 17/30359782 DC : 0 | BS ISO 8140 - PNEUMATIC FLUID POWER - CYLINDERS, 1000 KPA (10 BAR) SERIES - MOUNTING DIMENSIONS OF ROD-END CLEVISES |
| BS ISO 15407-1:2000 | Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces without electrical connector |
| ISO 12151-2:2003 | Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings |
| 14/30304022 DC : 0 | BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES |
| BS ISO 7789:2007 | Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities |
| ISO 7241:2014 | Hydraulic fluid power — Dimensions and requirements of quick-action couplings |
| 98/715115 DC : DRAFT SEP 1998 | ISO/CD 6982 - HYDRAULIC FLUID POWER - CYLINDERS - ROD END SPHERICAL EYES - MOUNTING DIMENSIONS |
| DIN ISO 1219:1978-08 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS |
| DIN SPEC 1330 : 2013 | INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012) |
| 98/706002 DC : DRAFT APR 1998 | ISO/CD 3601-5 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 5: ANTI-EXTRUSIONS DEVICES (BACK-UP RINGS) |
| 13/30294749 DC : 0 | BS ISO 19973-2 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 2: DIRECTIONAL CONTROL VALVES |
| BS 7198-1:1989 | Hydraulic fluid power quick-action couplings. Specification for dimensions and performance |
| CEI EN 50353 : 2002 | INSULATING OIL - DETERMINATION OF FIBRE CONTAMINATION BY THE COUNTING METHOD USING A MICROSCOPE |
| BS ISO 6431:1992 | Pneumatic fluid power. Single rod cylinders, 1000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm. Mounting dimensions |
| BS ISO 6605:2017 | Hydraulic fluid power. Test methods for hoses and hose assemblies |
| 11/30214548 DC : 0 | BS ISO 11170 - HYDRAULIC FLUID POWER - SEQUENCE OF TESTS FOR VERIFYING PERFORMANCE CHARACTERISTICS OF FILTER ELEMENTS |
| PD ISO/TS 18409:2018 | Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
| BS ISO 10770-2:2012 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for three-port directional flow-control valves |
| ISO 15086-1:2001 | Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 1: Introduction |
| BS ISO 19973-3:2015 | Pneumatic fluid power. Assessment of component reliability by testing Cylinders with piston rod |
| BS ISO 14617-6:2002 | Graphical symbols for diagrams Measurement and control functions |
| BS ISO 10094-2:2010 | Pneumatic fluid power. Electro-pneumatic pressure control valves Test methods to determine main characteristics to include in the supplier\'s literature |
| NFPA T3.5.26 : 2000 : R2009 | HYDRAULIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC VALVE |
| UNI ISO 12151-3 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| 13/30274177 DC : 0 | BS ISO 10762 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR CYLINDERS, 10 MPA (100 BAR) SERIES |
| ISO/TR 10771-2:2008 | Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 2: Rating methods |
| BS ISO 8573-5:2001 | Compressed air Test methods for oil vapour and organic solvent content |
| ISO 8573-4:2001 | Compressed air Part 4: Test methods for solid particle content |
| NF ISO 15171-1 : 2001 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 1: COUPLING NOT FOR CONNECTION UNDER PRESSURE |
| 14/30304019 DC : 0 | BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES |
| BS ISO 8434-6:2009 | Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring |
| PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| NFPA T3.4.7 : 2000 : R2014 | ACCUMULATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER ACCUMULATOR |
| 10/30196881 DC : 0 | BS ISO 6072 - RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
| 04/30077768 DC : DRAFT FEB 2004 | ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES |
| 13/30294746 DC : 0 | BS ISO 19973-1 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 1: GENERAL PROCEDURES |
| 05/30098235 DC : 0 | ISO 21081-1 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
| BS ISO 18869:2017 | Hydraulic fluid power. Test methods for couplings actuated with or without tools |
| BS ISO 12500-3:2009 | Filters for compressed air. Test methods Particulates |
| ISO/TR 16806:2003 | Pneumatic fluid power Cylinders Load capacity of pneumatic slides and their presentation method |
| BS ISO 10041-2:2010 | Pneumatic fluid power. Electro-pneumatic continuous flow control valves Test methods to determine main characteristics to include in the supplier\'s literature |
| PREN 13204 : DRAFT 2015 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| 04/30124527 DC : DRAFT OCT 2004 | ISO/DIS 6149-3 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS |
| BS ISO 7790:2013 | Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions |
| BS ISO 10771-1:2015 | Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Test method |
| BS ISO 12669:2017 | Hydraulic fluid power. Method for determining the required cleanliness level (RCL) of a system |
| NFPA T3.6.31 : 2000 : R2014 | TELESCOPIC CYLINDERS AND CYLINDERS OF NON-BOLTED END CONSTRUCTION - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000 - FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TELESCOPIC AND NONBOLTED END FLUID POWER CYLINDER |
| BS ISO 6263:2013 | Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces |
| PD ISO/TR 10949:2002 | Hydraulic fluid power. Component cleanliness. Guidelines for achieving and controlling cleanliness of components from manufacture to installation |
| 18/30358591 DC : 0 | BS ISO 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
| BS 7796:1995 | Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series |
| DIN EN ISO 1179-2:2014-03 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| 16/30339102 DC : 0 | BS ISO 6301-1 - PNEUMATIC FLUID POWER - COMPRESSED-AIR LUBRICATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER'S LITERATURE AND PRODUCT-MARKING REQUIREMENTS |
| BS ISO 7425-2:1989 | Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerances Rod seal housings |
| BS ISO 16874:2004 | Hydraulic fluid power. Identification of manifold assemblies and their components |
| 16/30317112 DC : 0 | BS ISO 3968 - HYDRAULIC FLUID POWER - FILTERS - EVALUATION OF DIFFERENTIAL PRESSURE VERSUS FLOW |
| NF EN ISO 19879 : 2010 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| BS ISO 1219-2:2012 | Fluid power systems and components. Graphical symbols and circuit diagrams Circuit diagrams |
| BS ISO 17165-1:2007 | Hydraulic fluid power. Hose assemblies Dimensions and requirements |
| BS ISO 14617-3:2002 | Graphical symbols for diagrams Connections and related devices |
| ISO 10946:1999 | Hydraulic fluid power Gas-loaded accumulators with separator Selection of preferred hydraulic ports |
| 02/710617 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| BS ISO 14743:2004 | Pneumatic fluid power. Push-in connectors for thermoplastic tubes |
| PD ISO/TS 16431:2002 | Hydraulic fluid power. Assembled systems. Verification of cleanliness |
| BS ISO 19973-4:2014 | Pneumatic fluid power. Assessment of component reliability by testing Pressure regulators |
| BS ISO 8137:1986 | Hydraulic fluid power. Single rod cylinders, 250 bar (25 MPa) series. Port dimensions |
| BS EN ISO 1179-2:2013 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| 09/30199057 DC : 0 | BS ISO 11926-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 UN AND UNF THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL |
| 16/30273511 DC : 0 | BS ISO 23309 - HYDRAULIC FLUID POWER SYSTEMS - ASSEMBLED SYSTEMS - METHODS OF CLEANING LINES BY FLUSHING |
| 05/30135263 DC : DRAFT JUN 2005 | ISO 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| 04/30108990 DC : DRAFT FEB 2004 | ISO 17567 - AGRICULTURE AND FORESTRY TRACTORS AND IMPLEMENTS - HYDRAULIC POWER BEYOND |
| BS 7294:1990 | Methods for determination of flow-rate characteristics of pneumatic fluid power components |
| BS ISO 4392-2:2002 | Hydraulic fluid power. Determination of characteristics of motors Startability |
| BS ISO 4407:2002 | Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the counting method using an optical microscope |
| BS ISO 4393:2015 | Fluid power systems and components. Cylinders. Basic series of piston strokes |
| BS 7780-2:1994 | Specification for rotary shaft lip type seals Vocabulary |
| BS ISO 6099:2009 | Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types |
| UNI EN 14753 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| 16/30329946 DC : 0 | BS ISO 5782-1 - PNEUMATIC FLUID POWER - COMPRESSED-AIR FILTERS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIERS' LITERATURE AND PRODUCT MARKING REQUIREMENTS |
| UNI ISO 8434-6 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| BS ISO 6982:1992 | Hydraulic fluid power. Cylinders. Rod end spherical eyes. Mounting dimensions |
| 14/30291030 DC : 0 | BS ISO 6432 - PNEUMATIC FLUID POWER - SINGLE ROD CYLINDERS, 1000 KPA (10 BAR) SERIES, BORES FROM 8 TO 25 MM - BASIC AND MOUNTING DIMENSIONS |
| BS ISO 6072:2011 | Rubber. Compatibility between hydraulic fluids and standard elastomeric materials |
| NFPA T2.12.11.1 : 2009 | FLUID POWER SYSTEMS AND COMPONENTS - RELIABILITY ANALYSIS, FIELD DATA REPORTING FORMAT AND DATABASE COMPILATION |
| BS ISO 14085-2:2015 | Aerospace series. Hydraulic filter elements. Test methods Conditioning |
| BS ISO 20401:2017 | Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors |
| BS ISO 15524:2011 | Pneumatic fluid power. Cylinders. Single-rod short-stroke cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| BS ISO 4397:2011 | Fluid power connectors and associated components. Nominal outside diameters of tubes and nominal hose sizes |
| UNI EN ISO 1179-4 : 2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| BS ISO 12151-3:2010 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| ISO 15407-2:2003 | Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector |
| 06/30127099 DC : DRAFT JUNE 2006 | ISO 17165-1 - HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
| NFPA T2.13.5 : 1991 : R2007 | HYDRAULIC FLUID POWER - INDUSTRIAL SYSTEMS - PRACTICE FOR THE USE OF HIGH WATER CONTENT FLUIDS |
| ANSI B93.99M : 87(R2001) | HYDRAULIC FLUID POWER - SERVOVALVES - TEST METHODS |
| BS ISO 3968:2017 | Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow |
| BS 2917-1:1993 | Graphic symbols and circuit diagrams for fluid power systems and components. Specification for graphic symbols |
| DIN ISO 4395 E : 2011 | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER PISTON ROD END TYPES AND DIMENSIONS |
| DIN ISO 6195:2015-02 (Draft) | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
| NFPA T3.21.18 : 1994 : R2015 | PNEUMATIC FLUID POWER - RECOMMENDED PRACTICE FOR CALIBRATION AND USE OF FLOWMETERS |
| NFPA T3.21.18 : 1994 : R2010 | PNEUMATIC FLUID POWER - RECOMMENDED PRACTICE FOR CALIBRATION AND USE OF FLOWMETERS |
| ONORM EN ISO 19879 : 2010 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| ISO 6358-1:2013 | Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow |
| 16/30335561 DC : DRAFT APR 2016 | BS ISO 37102 - SUSTAINABLE DEVELOPMENT AND RESILIENCE OF COMMUNITIES - VOCABULARY |
| SAE J 2435 : 2015 | WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING |
| DIN EN 14753:2008-03 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
| BS ISO 7368:2016 | Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| ISO 4021:1992 | Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system |
| ISO 4412-2:1991 | Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors |
| ISO 27407:2010 | Hydraulic fluid power Marking of performance characteristics on hydraulic filters |
| NF ISO 6072 : 2012 | RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
| ISO 15524:2011 | Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| ISO 4402:1991 | Hydraulic fluid power — Calibration of automatic-count instruments for particles suspended in liquids — Method using classified AC Fine Test Dust contaminant |
| ISO 6301-2:2006 | Pneumatic fluid power Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
| NFPA T3.9.22 : 2000 : R2005 | PUMP/MOTOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PUMP AND MOTOR |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| NFPA T3.20.8 : 2000 : R2014 | QUICK-ACTION COUPLING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATING OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER QUICK-ACTION COUPLING |
| I.S. EN 14753:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL |
| ISO 14617-2:2002 | Graphical symbols for diagrams Part 2: Symbols having general application |
| ANSI B93.103M : 1987 | HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 160 BAR (16 MPA) COMPACT SERIES - TOLERANCES, |
| DIN ISO 1219-1:2007-12 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 1: GRAPHIC SYMBOLS FOR CONVENTIONAL USE AND DATA-PROCESSING APPLICATIONS |
| NFPA T3.20.8 : 2000 : R2006 | QUICK-ACTION COUPLING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATING OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER QUICK-ACTION COUPLING |
| ISO 19973-4:2014 | Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators |
| ISO 16030:2001 | Pneumatic fluid power — Connections — Ports and stud ends |
| NFPA T3.5.26 : 2000 : R2014 | HYDRAULIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC VALVE |
| BS ISO 6301-2:1997 | Pneumatic fluid power. Compressed air lubricators Test methods to determine the main characteristics to be included in supplier\'s literature |
| I.S. EN ISO 1179-2:2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013) |
| PREN 14359 : DRAFT 2014 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| SAE J 1677 : 2016 | TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
| ISO 16031-1:2002 | Aerospace fluid systems — O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes — Part 1: Close tolerances for hydraulic systems |
| BS ISO 10945:1994 | Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports |
| NFPA T3.21.4 : 2000 : R2014 | PNEUMATIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PNEUMATIC VALVE |
| UNI EN ISO 8434-1 : 2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| BS ISO 18413:2015 | Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| SAE J 2613 : 2017 | WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING |
| ISO 6020-1:2007 | Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1: Medium series |
| UNI EN ISO 1179-3 : 2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| SAE J 1227 : 2013 | ASSESSING CLEANLINESS OF HYDRAULIC FLUID POWER COMPONENTS AND SYSTEMS |
| BIS IS/ISO 6194-1 : 2007 | ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| ASTM D 7721 : 2017 : REDLINE | Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency |
| NF ISO/TS 16431 : 2002 XP | HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - VERIFICATION OF CLEANLINESS |
| EN ISO 6149-1:2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2007) |
| EN ISO 8434-1:2007/AC:2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| ISO 21018-4:2016 | Hydraulic fluid power Monitoring the level of particulate contamination in the fluid Part 4: Use of the light extinction technique |
| ISO 15407-1:2000 | Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 1: Mounting interface surfaces without electrical connector |
| ISO 5597:2010 | Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| ISO 6953-2:2015 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers |
| ISO 15552:2018 | Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions |
| ISO 6020-3:2015 | Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm |
| ISO 10766:2014 | Hydraulic fluid power Cylinders Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
| ISO 12500-1:2007 | Filters for compressed air Test methods Part 1: Oil aerosols |
| ISO 12151-6:2009 | Connections for hydraulic fluid power and general use Hose fittings Part 6: Hose fittings with ISO 8434-6 60 degree cone ends |
| ISO 6432:2015 | Pneumatic fluid power Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm Basic and mounting dimensions |
| ISO 12151-4:2007 | Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends |
| ISO 10767-3:1999 | Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors |
| ISO 4392-2:2002 | Hydraulic fluid power Determination of characteristics of motors Part 2: Startability |
| ISO 7368:2016 | Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities |
| ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures |
| ISO 16656:2016 | Hydraulic fluid power Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) Mounting dimensions |
| EN ISO/IEC 80079-38:2016 | Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
| ISO 8434-6:2009 | Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring |
| ISO 23552-1:2007 | Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type |
| ISO 5781:2016 | Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces |
| ISO 6020-2:2015 | Hydraulic fluid power Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Part 2: Compact series |
| ISO 8139:2009 | Pneumatic fluid power Cylinders, 1 000 kPa (10 bar) series Mounting dimensions of rod-end spherical eyes |
| ISO 5782-2:1997 | Pneumatic fluid power Compressed-air filters Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
| DIN EN 1710:2008-08 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| BS EN ISO 9974-3:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with metal-to-metal sealing (type B) |
| BS EN 13135-2 : 2004 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| DIN EN ISO 4404-1:2012-10 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
| UNE-EN 13204:2017 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| ISO 8434-4:1995 | Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples |
| DIN EN ISO 4404-1 E : 2012 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
| UNI EN ISO 12922 : 2013 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| SAE J 2467 : 2020 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN ISO 6149-3:2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
| UNI EN 13135-2 : 2010 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| UNI EN 983 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| UNI EN 982 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| EN 13204:2016 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN ISO 4404-1 : 2013 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS |
| UNI EN 1710 : 2008 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN ISO 13849-2 : 2013 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| UNI EN 14681 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| ISO 6263:2013 | Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces |
| BS ISO 6358-1:2013 | Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids General rules and test methods for steady-state flow |
| BS 6494-5:1989 | Hydraulic fluid power valve mounting surfaces Specification for compensated flow-control valves |
| ISO 21018-1:2008 | Hydraulic fluid power Monitoring the level of particulate contamination of the fluid Part 1: General principles |
| ISO 4395:2009 | Fluid power systems and components Cylinder piston rod end types and dimensions |
| DIN EN ISO/IEC 80079-38 E : 2017 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
| ISO/TS 17165-2:2018 | Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose assemblies |
| 13/30274171 DC : 0 | BS ISO 8132 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) MEDIUM AND 25 MPA (250 BAR) SERIES |
| BS ISO 3601-4:2008 | Fluid power systems. O-rings Anti-extrusion rings (back-up rings) |
| NF ISO 5597 : 2010 | HYDRAULIC FLUID POWER - CYLINDERS - DIMENSIONS AND TOLERANCES OF HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS |
| NF ISO 6194-1 : 2011 | ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| PD ISO/TR 16806:2003 | Pneumatic fluid power. Cylinders. Load capacity of pneumatic slides and their presentation method |
| NFPA T3.6.31 : 2000 : R2006 | TELESCOPIC CYLINDERS AND CYLINDERS OF NON-BOLTED END CONSTRUCTION - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000 - FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TELESCOPIC AND NONBOLTED END FLUID POWER CYLINDER |
| NFPA T3.20.8 : 2000 : R2009 | QUICK-ACTION COUPLING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATING OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER QUICK-ACTION COUPLING |
| 11/30239328 DC : 0 | BS ISO 14540 - HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT QUICK-ACTION COUPLINGS FOR USE AT A PRESSURE OF 72 MPA (720 BAR) |
| DD ISO/TS 16952-1:2007 | Technical product documentation. Reference designation system General application rules |
| ISO 14617-8:2002 | Graphical symbols for diagrams Part 8: Valves and dampers |
| BS EN ISO 1179-4:2008 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Stud ends for general use only with metal-to-metal sealing (type B) |
| BS ISO 3019-1:2001 | Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Inch series shown in metric units |
| 14/30274168 DC : 0 | BS ISO 6020-3 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 3: COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM |
| SAE J 2337-2 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| ISO 10762:2015 | Hydraulic fluid power Mounting dimensions for cylinders, 10 MPa (100 bar) series |
| BS ISO 8778:2003 | Pneumatic fluid power. Standard reference atmosphere |
| 10/30215350 DC : 0 | BS ISO 16873 - HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES |
| BS ISO 5597:2010 | Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| NF ISO 10041-1 : 2010 | PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC CONTINUOUS FLOW CONTROL VALVES - PART 1: MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| PREN ISO 13849-2 : DRAFT 2010 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| 05/30125041 DC : DRAFT JAN 2005 | ISO 19973-1 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 1: GENERAL PRODUCTION CALCULATION METHOD |
| BS ISO 10094-1:2010 | Pneumatic fluid power. Electro-pneumatic pressure control valves Main characteristics to include in the supplier\'s literature |
| ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures |
| 08/30176283 DC : DRAFT JAN 2008 | BS ISO 6358-2 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 2: GENERAL RULES |
| I.S. EN ISO 8434-4:2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| BS ISO 11171:2016 | Hydraulic fluid power. Calibration of automatic particle counters for liquids |
| ISO 27996:2009 | Aerospace fluid systems — Elastomer seals — Storage and shelf life |
| UNI ISO 4397 : 2012 | FLUID POWER CONNECTORS AND ASSOCIATED COMPONENTS - NOMINAL OUTSIDE DIAMETERS OF TUBES AND NOMINAL HOSE SIZES |
| 11/30239331 DC : 0 | BS ISO 14541 - HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT TYPE QUICK-ACTION COUPLINGS FOR GENERAL PURPOSE |
| BS 5540-5:1987 | Evaluating particulate contamination of hydraulic fluids Method of reporting contamination analysis data |
| 04/30022935 DC : DRAFT NOV 2004 | BS ISO 12500-1 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 1: OIL AEROSOILS |
| BS ISO 15519-1:2010 | Specification for diagrams for process industry General rules |
| BS ISO 16589-2:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Vocabulary |
| UNI ISO 1219-1 : 1994 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - GRAPHIC SYMBOLS |
| 13/30271032 DC : 0 | BS ISO 14085-2 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 2: CONDITIONING |
| 00/707658 DC : DRAFT APR 2000 | PREN 13852-2 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| NFPA T2.13.7 : 1997 : R2005 | HYDRAULIC FLUID POWER - PETROLEUM FLUIDS - PREDICTION OF BULK MODULI |
| BS ISO 21018-3:2008 | Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid Use of the filter blockage technique |
| 04/30122476 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS ISO 15171-1:1999 | Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling not for connection under pressure |
| 17/30325994 DC : 0 | BS ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE-DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE |
| 05/30128814 DC : DRAFT NOV 2005 | ISO 19973-4 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 4: PRESSURE REGULATORS |
| BS ISO 21287:2004 | Pneumatic fluid power. Cylinders. Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| BS ISO 2942:2004 | Hydraulic fluid power. Filter elements. Verification of fabrication integrity and determination of the first bubble point |
| BS ISO 6149-1:1993 | Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Ports with O-ring in truncated housing |
| 04/30124525 DC : DRAFT OCT 2004 | ISO/DIS 6149-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS |
| ISO 16860:2005 | Hydraulic fluid power — Filters — Test method for differential pressure devices |
| SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
| BS ISO 5782-1:2017 | Pneumatic fluid power. Compressed air filters Main characteristics to be included in supplier\'s literature and product-marking requirements |
| BS ISO 9974-4:2006 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| 09/30199077 DC : 0 | BS ISO 4397 - FLUID POWER SYSTEMS AND COMPONENTS - CONNECTORS AND ASSOCIATED COMPONENTS - NOMINAL OUTSIDE DIAMETERS OF TUBES AND NOMINAL HOSE SIZES |
| BS ISO 12500-1:2007 | Filters for compressed air. Test methods Oil aerosols |
| DIN ISO 16030:2007-05 | PNEUMATIC FLUID POWER - CONNECTIONS - PORTS AND STUD ENDS |
| BS ISO 4395:2009 | Fluid power systems and components. Cylinder piston rod end types and dimensions |
| BS ISO 7241:2014 | Hydraulic fluid power. Dimensions and requirements of quick-action couplings |
| 01/704567 DC : 0 | ISO/DIS 16031-2 - AEROSPACE FLUID SYSTEMS - O-RINGS, INCH SERIES - INSIDE DIAMETERS AND CROSS-SECTIONS, TOLERANCES AND SIZE IDENTIFICATION CODES - PART 2: STANDARD TOLERANCES (FOR NON-HYDRAULIC SYSTEMS) |
| BS ISO 10766:2014 | Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
| BS ISO 6432:2015 | Pneumatic fluid power. Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm. Basic and mounting dimensions |
| BS ISO 3320:2013 | Fluid power systems and components. Cylinder bores and piston rod diameters and area ratios. Metric series |
| 08/30184317 DC : DRAFT JUNE 2008 | BS ISO 8139 - PNEUMATIC FLUID POWER - CYLINDERS, 1000 KPA (10 BAR) SERIES - MOUNTING DIMENSIONS OF ROD END SPHERICAL EYES |
| BS 7287:1990 | Guide for the use of fire-resistant hydraulic fluids |
| BS ISO 16860:2005 | Hydraulic fluid power. Filters. Test method for differential pressure devices |
| BS ISO 12238:2001 | Pneumatic fluid power. Directional control valves. Measurement of shifting time |
| BS 5242-2:1983 | Tubes for fluid power cylinder barrels Specification for non-ferrous metallic tubes with specially finished bores |
| 17/30360001 DC : 0 | BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
| 98/715116 DC : DRAFT SEP 1998 | ISO/CD 6981 - HYDRAULIC FLUID POWER - CYLINDERS - ROD END PLAIN EYES - MOUNTING DIMENSIONS |
| ISO 6149-4:2017 | Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| BS ISO 6953-2:2015 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics to be included in literature from suppliers |
| 13/30252560 DC : 0 | BS ISO 7241-1 - HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 1: DIMENSIONS AND REQUIREMENTS |
| 09/30207718 DC : 0 | BS ISO 7745 - HYDRAULIC FLUID POWER - FIRE-RESISTANT (FR) FLUIDS - GUIDELINES FOR USE |
| 96/709929 DC : DRAFT JUL 1996 | ISO/CD 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVATIES |
| BS ISO 11500:2008 | Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| BS ISO 8135:1999 | Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Tolerances |
| 00/704296 DC : DRAFT FEB 2000 | ISO/CD 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - METHOD FOR ACHIEVING ROLL-OFF CLEANLINESS |
| 00/704298 DC : DRAFT FEB 2000 | ISO/CD 2941 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| 09/30196676 DC : DRAFT OCT 2009 | BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
| BS 7847:1996 | Fluid power systems and components. Connectors and associated components. Nominal pressures |
| BS ISO 3601-2:2016 | Fluid power systems. O-rings Housing dimensions for general applications |
| DIN ISO 8140:2011-01 | Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises (ISO 8140:2009) |
| 05/30127096 DC : DRAFT FEB 2005 | ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| 00/715332 DC : DRAFT OCT 2000 | ISO/CD 12151-6 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS |
| ISO 14085-6:2015 | Aerospace series Hydraulic filter elements Test methods Part 6: Initial cleanliness level |
| UNI ISO 17165-1 : 2012 | HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
| BS ISO 7180:1986 | Pneumatic fluid power. Cylinders. Bore and port thread sizes |
| 11/30240403 DC : 0 | BS ISO 10770-2 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 2: TEST METHODS FOR THREE-WAY DIRECTIONAL FLOW CONTROL VALVES |
| 02/710642 DC : DRAFT SEP 2002 | BS ISO 2942 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF FABRICATION INTEGRITY AND DETERMINATION OF THE FIRST BUBBLE POINT |
| PD ISO/TR 17209:2013 | Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads |
| BS ISO 18582-1:2016 | Fluid power. Specification of reference dictionary General overview on organization and structure |
| DIN ISO 3019-2:2004-02 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001) |
| NFPA T2.12.11.1 : 2009 : R2014 | FLUID POWER SYSTEMS AND COMPONENTS - RELIABILITY ANALYSIS, FIELD DATA REPORTING FORMAT AND DATABASE COMPILATION |
| ISO/TS 11686:2017 | Connectors for fluid power and general use — Assembly instructions for connectors with adjustable stud ends and O-ring sealing |
| ANSI B93.110M : 1987 | PNEUMATIC FLUID POWER - CYLINDERS, 10 BAR (1 000 KPA) SERIES - ROD END CLEVIS - MOUNTING DIMENSIONS, |
| BS ISO 5599-1:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces without electrical connector |
| BS ISO 4404-1 : 2001 AMD 16690 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS |
| 02/707919 DC : DRAFT JUN 2002 | BS ISO 8573-8 - COMPRESSED AIR - PART 8: TEST METHODS FOR SOLID PARTICLE CONTENT BY MASS CONCENTRATION |
| BS ISO 7181:1991 | Hydraulic fluid power. Cylinders. Bore and rod area ratios |
| 14/30274238 DC : 0 | BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| 97/712737 DC : DRAFT JUL 1997 | ISO/CD 8434-5 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 5: TEST METHODS FOR THREADED HYDRAULIC FLUID POWER CONNECTIONS |
| 09/30196686 DC : 0 | BS ISO 10094-2 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC PRESSURE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
| BS ISO 2944:2000 | Fluid power systems and components. Nominal pressures |
| 02/708160 DC : DRAFT JUN 2002 | BS ISO 8573-9 - COMPRESSED AIR - PART 9: TEST METHODS FOR LIQUID WATER CONTENT |
| 17/30317139 DC : 0 | BS ISO 20155 - SHIPS AND MARINE TECHNOLOGY - TEST METHOD OF FLOW INDUCED IN-PIPE NOISE SOURCE CHARACTERISTICS FOR A SHIP-USED PUMP |
| DIN ISO 6020-1:2010-07 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series (ISO 6020-1:2007) |
| BS ISO 16031-1:2002 | Aerospace fluid systems. O-rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes Close tolerances for hydraulic systems |
| BS ISO 14617-4:2002 | Graphical symbols for diagrams Actuators and related devices |
| DIN EN ISO 11011 E : 2015 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013) |
| BS ISO 6264:1998 | Hydraulic fluid power. Pressure-relief valves. Mounting surfaces |
| BS ISO 8573-6:2003 | Compressed air Test methods for gaseous contaminant content |
| ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
| BS ISO 3857-4:2012 | Compressors, pneumatic tools and machines. Vocabulary Air treatment |
| 10/30196081 DC : 0 | BS ISO 4404-1 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 15086-2:2000 | Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 2: Measurement of the speed of sound in a fluid in a pipe |
| 99/704447 DC : DRAFT FEB 1999 | ISO/CD 15552-2 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - PART 2: ACCESSORIES DIMENSIONS |
| 07/30164305 DC : 0 | BS ISO 12500-3 - FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES |
| BS ISO 2943:1998 | Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids |
| BS 6494-3:1989 | Hydraulic fluid power valve mounting surfaces Specification for pressure-relief valves |
| NFPA T3.5.15M : 1986 : R2013 | HYDRAULIC FLUID POWER - VALVES - METHOD FOR DETERMINING THE INTERNAL LEAKAGE CHARACTERISTICS |
| 07/30162752 DC : 0 | BS ISO 2941 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| ANSI B93.109M : 1987 | PNEUMATIC FLUID POWER - CYLINDERS 10 BAR (1 000 KPA) SERIES - ROD END SPHERICAL EYES - MOUNTING DIMENSIONS, |
| BS ISO 8434-4 : 1995 AMD 11038 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| BS ISO 4413:1998 | Hydraulic fluid power. General rules relating to systems |
| SAE J 1453/2 : 2015 | Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads |
| ISO 8573-9:2004 | Compressed air — Part 9: Test methods for liquid water content |
| NF ISO 10770-1 : 2009 | HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-PORT DIRECTIONAL FLOW-CONTROL VALVES |
| BS ISO 6195:2013 | Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| NF ISO 4413 : 1999 | HYDRAULIC FLUID POWER - GENERAL RULES RELATING TO SYSTEMS |
| 07/30163925 DC : 0 | BS ISO 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
| BS 7198-2:1989 | Hydraulic fluid power quick-action couplings Methods of test |
| BS 7780-3:1994 | Rotary shaft lip type seals. Storage, handling and installation |
| BS ISO 7241-2:2000 | Hydraulic fluid power. Quick-action couplings Test methods |
| BS ISO 16589-5:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Identification of visual imperfections |
| DIN ISO 3601-1:2013-11 | Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2012 + Cor. 1:2012) |
| ISO 3320:2013 | Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series |
| NF ISO 10041-2 : 2010 | PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC CONTINUOUS FLOW CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
| UNI ISO 4411 : 2012 | HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
| NF EN 50353 : 2003 | INSULATING OIL - DETERMINATION OF FIBER CONTAMINATION BY THE COUNTING METHOD USING A MICROSCOPE |
| NFPA T3.19.12M : 1982 : R2007 | HYDRAULIC FLUID POWER - RECIPROCATING DYNAMIC SEALING DEVICES IN LINEAR ACTUATORS - METHOD OF TESTING, MEASURING, AND REPORTING LEAKAGE |
| BS ISO 1219-3:2016 | Fluid power systems and components. Graphical symbols and circuit diagrams Symbol modules and connected symbols in circuit diagrams |
| SAE J 747 : 2017 | CONTROL VALVE TEST PROCEDURE |
| SAE J 2337-1 : 2014 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH RECESSED CONICAL SEAT REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| ISO 5599-2:2001 | Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector |
| ISO 6099:2009 | Fluid power systems and components Cylinders Identification code for mounting dimensions and mounting types |
| ISO 10041-2:2010 | Pneumatic fluid power Electro-pneumatic continuous flow control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature |
| NFPA T3.29.2 : 2000 : R2014 | PRESSURE SWITCH - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PRESSURE SWITCH |
| ISO 7425-2:1989 | Hydraulic fluid power Housings for elastomer-energized, plastic-faced seals Dimensions and tolerances Part 2: Rod seal housings |
| NF ISO 15407-1 : 2001 | PNEUMATIC FLUID POWER - FIVE-PORT DIRECTIONAL CONTROL VALVES, SIZES 18 MM AND 26 MM - PART 1: MOUNTING INTERFACE SURFACES WITHOUT ELECTRICAL CONNECTOR |
| NFPA T3.19.25 : 2004 | INFORMATION REPORT - FLUID POWER SYSTEMS - SEALING DEVICES - STORAGE, HANDLING AND INSTALLATION OF ELASTOMERIC SEALS AND EXCLUSION DEVICES |
| ISO 8131:1992 | Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series Tolerances |
| UNI ISO 8434-3 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS |
| ISO 8426:2008 | Hydraulic fluid power Positive displacement pumps and motors Determination of derived capacity |
| ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
| ISO 19973-3:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 3: Cylinders with piston rod |
| I.S. EN ISO/IEC 80079-38:2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012) |
| ISO 16874:2004 | Hydraulic fluid power Identification of manifold assemblies and their components |
| ISO 3968:2017 | Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow |
| NFPA T2.6.1 : 2001 : R2005 | FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER COMPONENT |
| ISO 2942:2004 | Hydraulic fluid power Filter elements Verification of fabrication integrity and determination of the first bubble point |
| NFPA T3.10.5.1 : 2000 : R2005 | HYDRAULIC FILTER/SEPARATOR HOUSING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC FILTER/SEPARATOR |
| ISO/TR 10686:2013 | Hydraulic fluid power Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system |
| NFPA T3.6.1 : 1984 | FLUID POWER SYSTEMS AND PRODUCTS - CYLINDER BORES AND PISTON ROD DIAMETERS - INCH SERIES |
| NFPA T2.30.6 : 2002 : R2009 | HYDRAULIC FLUID POWER - ELECTRICAL CONNECTORS FOR USE WITH INDUSTRIAL HYDRAULIC INTEGRATED PROPORTIONAL VALVES - DIMENSIONS AND REQUIREMENTS |
| NFPA T3.4.7 : 2000 : R2009 | ACCUMULATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER ACCUMULATOR |
| NFPA T2.30.6 : 2002 : R2014 | HYDRAULIC FLUID POWER - ELECTRICAL CONNECTORS FOR USE WITH INDUSTRIAL HYDRAULIC INTEGRATED PROPORTIONAL VALVES - DIMENSIONS AND REQUIREMENTS |
| ISO 2941:2009 | Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating |
| ISO 10041-1:2010 | Pneumatic fluid power Electro-pneumatic continuous flow control valves Part 1: Main characteristics to include in the supplier's literature |
| BS ISO 8140:2009 | Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end clevises |
| I.S. EN ISO 11011:2015 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013) |
| I.S. EN ISO 6149-4:2017 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017) |
| ISO 6981:1992 | Hydraulic fluid power — Cylinders — Rod end plain eyes — Mounting dimensions |
| BS ISO 4409:2007 | Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance |
| UNE-EN ISO 1179-2:2014 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| ANSI B93.1987M : 1987 | PNEUMATIC FLUID POWER - SINGLE ROD CYLINDERS WITH DETACHABLE MOUNTINGS-10 BAR (1000KPA) SERIES - BORES FROM 32 TO 320MM - MOUNTING DIMENSIONS, |
| ANSI B93.106M : 1987 | HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 160 BAR (16 MPA) MEDIUM SERIES - PORT DIMENSIONS, |
| SAE J 2312 : 2013 | AUTOMATIC TRANSMISSION INTAKE FILTER TEST PROCEDURE |
| ISO 12151-1:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| ISO/TS 81346-3:2012 | Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 3: Application rules for a reference designation system |
| ISO 14085-1:2015 | Aerospace series Hydraulic filter elements Test methods Part 1: Test sequence |
| ISO 16589-2:2001 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Part 2: Vocabulary |
| ISO 4392-1:2002 | Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure |
| ISO 17559:2003 | Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics |
| ISO 3601-5:2015 | Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications |
| ISO/TR 15640:2011 | Hydraulic fluid power contamination control General principles and guidelines for selection and application of hydraulic filters |
| ISO 11158:2009 | Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG |
| ISO 19973-2:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 2: Directional control valves |
| ISO 8573-3:1999 | Compressed air Part 3: Test methods for measurement of humidity |
| ISO 18582-1:2016 | Fluid power — Specification of reference dictionary — Part 1: General overview on organization and structure |
| ISO 19973-5:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves |
| ISO 15519-1:2010 | Specification for diagrams for process industry Part 1: General rules |
| ISO 23181:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using high viscosity fluid |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 8573-5:2001 | Compressed air — Part 5: Test methods for oil vapour and organic solvent content |
| ISO 7790:2013 | Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 — Clamping dimensions |
| ISO 6194-5:2008 | Rotary-shaft lip-type seals incorporating elastomeric sealing elements — Part 5: Identification of visual imperfections |
| ISO 14617-3:2002 | Graphical symbols for diagrams Part 3: Connections and related devices |
| ISO 14617-9:2002 | Graphical symbols for diagrams Part 9: Pumps, compressors and fans |
| ISO 14617-6:2002 | Graphical symbols for diagrams Part 6: Measurement and control functions |
| ISO 14085-5:2015 | Aerospace series Hydraulic filter elements Test methods Part 5: Resistance to flow fatigue |
| ISO 16028:1999 | Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications |
| ISO 4411:2008 | Hydraulic fluid power Valves Determination of pressure differential/flow characteristics |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| ISO 8778:2003 | Pneumatic fluid power — Standard reference atmosphere |
| ISO 16873:2011 | Hydraulic fluid power — Pressure switches — Mounting surfaces |
| DIN EN 14681 E : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| UNE-EN ISO 12922:2013 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
| ISO 9974-1:1996 | Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports |
| BS EN ISO 6149-3:2007 | Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| BS EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| ISO 7241-2:2000 | Hydraulic fluid power Quick-action couplings Part 2: Test methods |
| ISO 3019-1:2001 | Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 1: Inch series shown in metric units |
| ISO 10767-2:1999 | Hydraulic fluid power Determination of pressure ripple levels generated in systems and components Part 2: Simplified method for pumps |
| ISO 4405:1991 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method |
| ISO 10100:2001 | Hydraulic fluid power Cylinders Acceptance tests |
| BS EN 982 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| BS EN 13204 : 2004 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| ISO 1179-3:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| ISO 9974-3:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B) |
| ISO 11011:2013 | Compressed air — Energy efficiency — Assessment |
| I.S. EN ISO 12922:2012 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
| ISO 1179-1:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports |
| ISO 6431:1992 | Pneumatic fluid power Single rod cylinders, 1 000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm Mounting dimensions |
| ISO 7241-1:1987 | Hydraulic fluid power Quick-action couplings Part 1: Dimensions and requirements |
| ISO 6547:1981 | Hydraulic fluid power — Cylinders — Piston seal housings incorporating bearing rings — Dimensions and tolerances |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO 5596:1999 | Hydraulic fluid power Gas-loaded accumulators with separator Ranges of pressures and volumes and characteristic quantities |
| BS EN 983 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| ISO 10099:2001 | Pneumatic fluid power — Cylinders — Final examination and acceptance criteria |
| ISO 9974-2:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 6264:1998 | Hydraulic fluid power — Pressure-relief valves — Mounting surfaces |
| BS ISO 10767-2:1999 | Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Simplified method for pumps |
| BS EN 1710 : 2005 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| ISO 6149-2:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| BS ISO 3724:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant |
| ISO 19879:2010 | Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
| ISO 6150:1988 | Pneumatic fluid power Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) Plug connecting dimensions, specifications, application guidelines and testing |
| NFPA T3.6.8 : 2010 | FLUID POWER SYSTEMS - CYLINDERS - DIMENSIONS FOR ACCESSORIES FOR CATALOGED SQUARE HEAD INDUSTRIAL TYPES |
| ISO 6149-3:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| NFPA T3.6.37 : 2010 | HYDRAULIC FLUID POWER - CYLINDERS - METHOD FOR DETERMINING THE BUCKLING LOAD |
| ISO 3322:1985 | Fluid power systems and components — Cylinders — Nominal pressures |
| ISO 6358-3:2014 | Pneumatic fluid power Determination of flow-rate characteristics of components using compressible fluids Part 3: Method for calculating steady-state flow-rate characteristics of systems |
| DIN ISO 3320:2016-01 | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER BORES AND PISTON ROD DIAMETERS AND AREA RATIOS - METRIC SERIES (ISO 3320:2013) |
| ANSI B93.22M : 1987 | HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF FABRICATION INTEGRITY |
| EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| BS 2917:1977 | Specification for graphical symbols used on diagrams for fluid power systems and components |
| EN 1710:2005+A1:2008/AC:2010 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| EN ISO 6149-2:2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2007) |
| EN ISO 1179-2:2013 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| EN ISO 1179-1:2013 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
| EN ISO 9974-2:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996) |
| EN 14492-1:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| EN 14681:2006+A1:2010 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
| EN ISO 1179-3:2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007) |
| EN ISO 11011:2015 | Compressed air - Energy efficiency - Assessment (ISO 11011:2013) |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 14753:2007 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
| EN ISO 1179-4 : 2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007) |
| EN 14492-2:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN ISO 4404-1:2012 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012) |
| EN ISO 8434-4 : 2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| EN ISO 9974-1:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996) |
| EN 13731:2007 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
| EN ISO 9974-3:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996) |
| DIN EN ISO 11011:2015-08 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013) |
| NFPA T3.12.10 : 2000 : R2005 | AIR LINE FILTER, REGULATOR AND/OR LUBRICATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER FRL |
| BS ISO 10099:2001 | Pneumatic fluid power. Cylinders. Final examination and acceptance criteria |
| 04/30098199 DC : DRAFT JUL 2004 | ISO 6022 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES |
| BS ISO 5781:2000 | Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces |
| BS ISO 7745:2010 | Hydraulic fluid power. Fire-resistant FR) fluids. Requirements and guidelines for use |
| 15/30321906 DC : 0 | BS ISO 11943 - HYDRAULIC FLUID POWER - ON-LINE AUTOMATIC PARTICLE-COUNTING SYSTEMS FOR LIQUIDS - METHODS OF CALIBRATION AND VALIDATION |
| 03/110806 DC : DRAFT JUNE 2003 | BS ISO 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| SAE J 2467 : 2015 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| ISO/TR 10949:2002 | Hydraulic fluid power Component cleanliness Guidelines for achieving and controlling cleanliness of components from manufacture to installation |
| BS ISO 12151-4:2007 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6149 metric stud ends |
| BS ISO 6953-3:2013 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
| ISO 8625-1:2018 | Aerospace — Fluid systems — Vocabulary — Part 1: General terms and definitions related to pressure |
| BS ISO 16030:2001 | Pneumatic fluid power. Connections. Ports and stud ends |
| ISO 12500-2:2007 | Filters for compressed air — Test methods — Part 2: Oil vapours |
| NF ISO 5599-2 : 2002 AMD 1 2004 | PNEUMATIC FLUID POWER - FIVE-PORT DIRECTIONAL CONTROL VALVES - PART 2: MOUNTING INTERFACE SURFACES WITH OPTIONAL ELECTRICAL CONNECTOR |
| NF ISO 2944 : 2000 | FLUID POWER SYSTEMS AND COMPONENTS - NOMINAL PRESSURES |
| DIN ISO/TS 81346-3;DIN SPEC 1330:2013-09 | INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012) |
| BS ISO 13726:2008 | Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm. Accessory mounting dimensions |
| 05/30125044 DC : DRAFT JAN 2005 | ISO 19973-2 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 2: VALVES |
| BS ISO 4411:2008 | Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristics |
| BS ISO 18237:2017 | Hydraulic fluid power. Method for evaluating water separation performance of dehydrators |
| BS ISO 6953-1:2015 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to be included in literature from suppliers and product-marking requirements |
| DIN ISO 3019-1:2004-02 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001) |
| ISO 12238:2001 | Pneumatic fluid power — Directional control valves — Measurement of shifting time |
| DIN EN ISO 1179-4:2008-08 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| NFPA T3.6.29 : 2000 : R2006 | TIE ROD OR BOLTED CYLINDER - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TIE ROD OR BOLTED CYLINDER |
| NFPA T3.5.14 : 2009 : R2014 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
| 10/30194893 DC : 0 | BS EN 13135-2:2004/A1 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| NFPA T3.9.22 : 2000 : R2009 | PUMP/MOTOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PUMP AND MOTOR |
| ISO 19973-1:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 1: General procedures |
| ANSI B93.108M : 1987 | HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 160 BAR (16 MPA) COMPACT SERIES - PORT DIMENSIONS, |
| 13/30271035 DC : 0 | BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY |
| DIN EN ISO 8434-1 E : 2008 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| 13/30250847 DC : 0 | BS ISO 6953-1 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS AND PRODUCT-MARKING REQUIREMENTS |
| 11/30237803 DC : 0 | BS ISO 7790 - HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS |
| NFPA T2.13.13 : 2002 : R2015 | RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - FLUIDS - VISCOSITY SELECTION CRITERIA FOR HYDRAULIC MOTORS AND PUMPS |
| BS 5540-1:1978 | Specification for evaluating particulate contamination of hydraulic fluids Qualifying and controlling of cleaning methods for sample containers |
| 11/30232479 DC : 0 | BS ISO 3857-4 - COMPRESSOR, PNEUMATIC TOOLS AND MACHINES - VOCABULARY - PART 4: AIR TREATMENT |
| 14/30284271 DC : 0 | BS ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES |
| 01/714273 DC : 0 | ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| ISO 6953-3:2012 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
| BS 6277:1982 | Method for determination of pressure drop/flow characteristics of hydraulic fluid power filters |
| 99/704445 DC : DRAFT FEB 1999 | ISO/CD 15552-1 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1 000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - PART 1: BASIC AND MOUNTING DIMENSIONS |
| ISO 8133:2014 | Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series |
| 14/30291027 DC : 0 | BS ISO 4393 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - BASIC SERIES OF PISTON STROKES |
| ISO 10767-1:2015 | Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps |
| 06/30128779 DC : DRAFT AUG 2006 | ISO 8426 - HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS - DETERMINATION OF DERIVED CAPACITY |
| BS ISO 15171-2:2016 | Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling with M16 x 2 end for connection under pressure |
| NFPA T3.29.2 : 2000 : R2009 | PRESSURE SWITCH - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PRESSURE SWITCH |
| 09/30176303 DC : 0 | BS ISO 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - SYSTEM CLEAN-UP PROCEDURES AND VERIFICATION OF CLEANLINESS |
| BS ISO 12500-2:2007 | Filters for compressed air. Test methods Oil vapours |
| BS ISO 14617-8:2002 | Graphical symbols for diagrams Valves and dampers |
| 13/30271029 DC : 0 | BS ISO 14085-1 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 1: TEST SEQUENCE |
| 05/30111949 DC : DRAFT JUL 2005 | ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE |
| 03/306594 DC : DRAFT APR 2003 | BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE |
| BS ISO 11943:1999 | Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation |
| BS ISO 16873:2011 | Hydraulic fluid power. Pressure switches. Mounting surfaces |
| 16/30268528 DC : 0 | BS ISO 18237 - HYDRAULIC FLUID POWER - METHOD FOR EVALUATING WATER SEPARATION PERFORMANCE OF DEHYDRATORS |
| BS EN ISO 4413:2010 | Hydraulic fluid power. General rules and safety requirements for systems and their components |
| BS ISO 27996:2009 | Aerospace fluid systems. Elastomer seals. Storage and shelf life |
| BS ISO 4414:1998 | Pneumatic fluid power. General rules relating to systems |
| 07/30155311 DC : 0 | BS ISO 27996 - AEROSPACE FLUID SYSTEMS - ELASTOMER SEALS - STORAGE AND SHELF LIFE |
| ANSI B93.80M : 1987 | HYDRAULIC FLUID POWER FILTERS EVALUATION OF PRESSURE DROP VERSUS FLOW CHARACTERISTICS, |
| DIN ISO 3601-4:2010-08 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings) (ISO 3601-4:2008) |
| BS ISO 19973-5:2015 | Pneumatic fluid power. Assessment of component reliability by testing Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves |
| 12/30260523 DC : 0 | BS EN ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD NDS WITH ELASTOMERIC SEALING (TYPE E) (ISO/DIS 1179-2:2012) |
| 98/717481 DC : DRAFT DEC 1998 | ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT |
| 11/30075025 DC : 0 | ISO 21017 - HYDRAULIC FLUID POWER - CLEANLINESS OF PARTS AND COMPONENTS - EXPRESSION OF PARTICULATE CONTAMINATION LEVEL |
| DIN ISO 3724:1990-11 | HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF FLOW FATIGUE CHARACTERISTICS |
| DIN EN ISO 1179-3:2008-08 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| 05/30098254 DC : DRAFT JUL 2005 | ISO 23309 - HYDRAULIC FLUID POWER - PIPING SYSTEMS - METHODS FOR CLEANING AND FLUSHING |
| 07/30163197 DC : 0 | BS ISO 12151-1 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| DIN ISO 3601-3:2010-08 | Fluid power systems - O-Rings - Part 3: Quality acceptance criteria (ISO 3601-3:2005) |
| BIS IS 13534 : 2013 | HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
| SAE J 1453/3 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS |
| BS ISO 6194-3:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Storage, handling and installation |
| PD ISO/TS 11686:2017 | Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing |
| BS ISO 16656:2004 | Hydraulic fluid power. Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar). Mounting dimensions |
| ISO/TS 18409:2018 | Hydraulic fluid power Hose and hose assemblies Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
| NF ISO 12151-1 : 2010 AMD 1 2017 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| SAE J 2551 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
| BS ISO 6194-1:2007 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Nominal dimensions and tolerances |
| DIN ISO 6162-1:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| NF ISO 12151-6 : 2009 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREES CONE ENDS |
| 13/30274174 DC : 0 | BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES |
| 04/30124528 DC : DRAFT OCT 2004 | ISO/DIS 6149-1 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL |
| 16/30312462 DC : 0 | BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
| 13/30271044 DC : 0 | BS ISO 14085-6 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 6: INITIAL CLEANLINESS LEVEL |
| NFPA T3.10.5.1 : 2000 : R2014 | HYDRAULIC FILTER/SEPARATOR HOUSING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC FILTER/SEPARATOR |
| DIN ISO 8139:2011-01 | Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes (ISO 8139:2009) |
| 07/30131694 DC : 0 | BS ISO 6194-4 - ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES |
| UNI EN ISO 19879 : 2011 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| BS ISO 6547:1981 | Hydraulic fluid power. Cylinders. Piston seal housings incorporating bearing rings. Dimensions and tolerances |
| 04/30098205 DC : DRAFT JUL 2004 | ISO 8132 - HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, (16 MPA) 160 BAR MEDIUM AND 25 MPA (250 BAR) SERIES - MOUNTING DIMENSIONS FOR ACCESSORIES |
| SAE J 1926/3 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS |
| NFPA T3.5.15M : 1986 | HYDRAULIC FLUID POWER - VALVES - METHOD FOR DETERMINING THE INTERNAL LEAKAGE CHARACTERISTICS |
| BS ISO 15552:2004 | Pneumatic fluid power. Cylinders with detachable mountings, 1 000 kPa 10 bar series, bores from 32 mm to 320 mm. Basic, mounting and accessories dimensions |
| BS ISO 4401:2005 | Hydraulic fluid power. Four-port directional control valves. Mounting surfaces |
| 08/30176290 DC : DRAFT JAN 2008 | BS ISO 6358-4 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 4: CHARGE TEST AS AN ALTERNATE TEST METHOD |
| ISO 11943:1999 | Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation |
| NFPA T3.5.15M : 1986 : R2008 | HYDRAULIC FLUID POWER - VALVES - METHOD FOR DETERMINING THE INTERNAL LEAKAGE CHARACTERISTICS |
| BS ISO 23181:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid |
| 09/30199068 DC : 0 | BS ISO 11926-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS |
| BS ISO 3723:2015 | Hydraulic fluid power. Filter elements. Method for end load test |
| 08/30174605 DC : DRAFT SEP 2008 | BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
| NFPA T3.10.5.1 : 2000 : R2009 | HYDRAULIC FILTER/SEPARATOR HOUSING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC FILTER/SEPARATOR |
| BS ISO 16902-1:2003 | Hydraulic fluid power. Test code for the determination of sound power levels using sound intensity techniques. Engineering method Pumps |
| BS ISO 4404:1998 | Petroleum and related products. Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems |
| ISO 14085-2:2015 | Aerospace series Hydraulic filter elements Test methods Part 2: Conditioning |
| 05/30135261 DC : DRAFT JUN 2005 | ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| NFPA T2.13.13 : 2002 : R2010 | RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - FLUIDS - VISCOSITY SELECTION CRITERIA FOR HYDRAULIC MOTORS AND PUMPS |
| 06/30128759 DC : 0 | BS ISO 15086-3 - HYDRAULIC FLUID POWER - DETERMINATION OF THE FLUID-BORNE NOISE CHARACTERISTICS OF COMPONENTS AND SYSTEMS - PART 3: MEASUREMENT OF HYDRAULIC IMPEDANCE |
| 08/30171024 DC : DRAFT MAY 2008 | BS ISO 10770-1 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-WAY DIRECTIONAL FLOW CONTROL VALVES |
| BS ISO 16028:1999 | Hydraulic fluid power. Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar). Specifications |
| NF ISO 8434-6 : 2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREES CONE CONNECTORS WITH OR WITHOUT O-RING |
| SAE J 1926/1 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING |
| ANSI B93.91M : 1987 | HYDRAULIC FLUID POWER - CYLINDERS - ROD END SPHERICAL EYES - MOUNTING DIMENSIONS, |
| DIN ISO 10763 E : 2004 | HYDRAULIC FLUID POWER - PLAIN-END, SEAMLESS AND WELDED PRECISION STEEL TUBES - DIMENSIONS AND NOMINAL WORKING PRESSURES |
| ISO 4399:1995 | Fluid power systems and components Connectors and associated components Nominal pressures |
| UNI ISO 12151-4 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS |
| NFPA T3.19.12M : 1982 : R2012 | HYDRAULIC FLUID POWER - RECIPROCATING DYNAMIC SEALING DEVICES IN LINEAR ACTUATORS - METHOD OF TESTING, MEASURING, AND REPORTING LEAKAGE |
| NF ISO 16902-1 : 2004 | HYDRAULIC FLUID POWER - TEST CODE FOR THE DETERMINATION OF SOUND POWER LEVELS USING SOUND INTENSITY TECHNIQUES: ENGINEERING METHOD - PART 1: PUMPS |
| DIN ISO 20401:2007-07 | Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm (ISO 20401:2005 + Cor. 1:2005) |
| DIN ISO 6162-2:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51 |
| NF EN ISO 4413 : 2011 | HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
| DIN ISO 12151-2 E : 2004 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 2: HOSE FITTINGS WITH ISO 8434-1 AND ISO 8434-4 24 DEGREE CONE CONNECTOR ENDS WITH O-RINGS |
| ISO 3722:1976 | Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods |
| SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
| ISO 12500-4:2009 | Filters for compressed air Methods of test Part 4: Water |
| ISO 10770-3:2007 | Hydraulic fluid power Electrically modulated hydraulic control valves Part 3: Test methods for pressure control valves |
| BS ISO 3601-3 : 2005 | FLUID POWER SYSTEMS - O-RINGS - PART 3: QUALITY ACCEPTANCE CRITERIA |
| BS ISO 8139:2009 | Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end spherical eyes |
| ISO 17567:2005 | Agricultural and forestry tractors and implements Hydraulic power beyond |
| ANSI B93.113M : 87(R1993) | HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - DIMENSIONS & REQUIREMENTS |
| ISO 9974-4:2016 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| ISO 8140:2009 | Pneumatic fluid power Cylinders, 1 000 kPa (10 bar) series Mounting dimensions of rod-end clevises |
| ISO 12829:2016 | Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope |
| NF ISO 3019-2 : 2002 | HYDRAULIC FLUID POWER - DIMENSIONS AND IDENTIFICATION CODE FOR MOUNTING FLANGES AND SHAFT ENDS OF DISPLACEMENT PUMPS AND MOTORS - PART 2: METRIC SERIES |
| NF ISO 11171 : 2011 | HYDRAULIC FLUID POWER - CALIBRATION OF AUTOMATIC PARTICLE COUNTERS FOR LIQUIDS |
| I.S. EN ISO 1179-3:2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| NF ISO 10094-1 : 2010 | PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC PRESSURE CONTROL VALVES - PART 1: MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
| ISO 18869:2017 | Hydraulic fluid power — Test methods for couplings actuated with or without tools |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| NFPA T3.5.50 : 2009 : R2014 | HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS |
| NFPA T3.6.31 : 2000 : R2009 | TELESCOPIC CYLINDERS AND CYLINDERS OF NON-BOLTED END CONSTRUCTION - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000 - FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TELESCOPIC AND NONBOLTED END FLUID POWER CYLINDER |
| NFPA T3.9.22 : 2000 : R2014 | PUMP/MOTOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PUMP AND MOTOR |
| NFPA T3.4.7 : 2000 : R2005 | ACCUMULATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER ACCUMULATOR |
| NFPA T3.29.2 : 2000 : R2005 | PRESSURE SWITCH - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PRESSURE SWITCH |
| NFPA T3.5.50 : 2009 | HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS |
| NFPA T3.6.29 : 2000 : R2014 | TIE ROD OR BOLTED CYLINDER - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TIE ROD OR BOLTED CYLINDER |
| NFPA T3.19.25 : 2004 : R2009 | INFORMATION REPORT - FLUID POWER SYSTEMS - SEALING DEVICES - STORAGE, HANDLING AND INSTALLATION OF ELASTOMERIC SEALS AND EXCLUSION DEVICES |
| SAE J 533 : 2017 | FLARES FOR TUBING |
| NFPA T3.5.14 : 2009 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
| NFPA T3.19.18 : 2009 : R2014 | FLUID POWER - SEALING DEVICES - GROOVE DIMENSIONS FOR RADIAL COMPRESSION TYPE PISTON RINGS |
| NF ISO 10094-2 : 2010 | PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC PRESSURE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
| BS 7275-2:1990 | Determination of hydraulic fluid power motor characteristics Method for startability |
| ISO 3019-2:2001 | Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series |
| UNI EN ISO 1179-1 : 2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS |
| NF ISO 17559 : 2004 | HYDRAULIC FLUID POWER - ELECTRICALLY CONTROLLED HYDRAULIC PUMPS - TEST METHODS TO DETERMINE PERFORMANCE CHARACTERISTICS |
| UNI EN ISO 1179-2 : 2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| NF ISO 12151-3 : 2010 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| NFPA T3.21.4 : 2000 : R2009 | PNEUMATIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PNEUMATIC VALVE |
| ISO 8132:2014 | Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series |
| ISO 5782-1:2017 | Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements |
| ISO 10770-1:2009 | Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 1: Test methods for four-port directional flow-control valves |
| BS ISO 21018-4:2016 | Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid Use of the light extinction technique |
| ISO 18413:2015 | Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| ISO 6982:1992 | Hydraulic fluid power Cylinders Rod end spherical eyes Mounting dimensions |
| ISO 10094-1:2010 | Pneumatic fluid power Electro-pneumatic pressure control valves Part 1: Main characteristics to include in the supplier's literature |
| DIN EN ISO 19879:2011-01 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| ISO 10094-2:2010 | Pneumatic fluid power Electro-pneumatic pressure control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature |
| ISO 3601-2:2016 | Fluid power systems — O-rings — Part 2: Housing dimensions for general applications |
| ISO 6194-2:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 2: Vocabulary |
| ISO 8573-6:2003 | Compressed air — Part 6: Test methods for gaseous contaminant content |
| ISO 14085-4:2015 | Aerospace series Hydraulic filter elements Test methods Part 4: Verification of collapse/burst pressure rating |
| ISO 6194-1:2007 | Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances |
| ISO 23309:2007 | Hydraulic fluid power systems Assembled systems Methods of cleaning lines by flushing |
| ISO 14617-5:2002 | Graphical symbols for diagrams Part 5: Measurement and control devices |
| ISO 16589-3:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation |
| ISO 4412-1:1991 | Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps |
| ISO 8137:1986 | Hydraulic fluid power Single rod cylinders, 250 bar (25 MPa) series Port dimensions |
| ISO/TR 17165-2:2006 | Hydraulic fluid power Hose assemblies Part 2: Recommended practices for hydraulic hose assemblies |
| ISO 6162:1994 | Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series |
| ISO 12922:2012 | Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| DIN EN ISO 6149-3:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
| DIN EN ISO 6149-2:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006) |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 13135-2:2011-07 | CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| ISO 17082:2004 | Pneumatic fluid power — Valves — Data to be included in supplier literature |
| ISO 1179-2:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| ISO 3724:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant |
| BS EN ISO 6149-2:2007 | Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| BS EN ISO 9974-2:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E) |
| ISO 7181:1991 | Hydraulic fluid power Cylinders Bore and rod area ratios |
| 11/30254394 DC : 0 | BS ISO 6358-3 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS - PART 3: METHOD FOR CALCULATING STEADY-STATE FLOW-RATE CHARACTERISTICS OF ASSEMBLIES |
| ISO 1179-4:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B) |
| BS EN ISO 4404-1:2012 | Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids Water-containing fluids |
| BS EN 14681 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| BS EN ISO 19879:2010 | Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections |
| ISO 2943:1998 | Hydraulic fluid power Filter elements Verification of material compatibility with fluids |
| ISO 11727:1999 | Pneumatic fluid power Identification of ports and control mechanisms of control valves and other components |
| DIN EN 983:1996-09 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| DIN ISO 12151-3:2012-08 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010) |
| DIN ISO 15171-1:2004-05 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999) |
| DIN EN 983:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| DIN EN 14359:2017-09 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| EN 50353:2001 | Insulating oil - Determination of fibre contamination by the counting method using a microscope |
| IEC 60050-351:2013 | International Electrotechnical Vocabulary (IEV) - Part 351: Control technology |
| ISO 611:2003 | Road vehicles Braking of automotive vehicles and their trailers Vocabulary |
| ISO 10241:1992 | International terminology standards Preparation and layout |
| ISO 9245:1991 | Earth-moving machinery Machine productivity Vocabulary, symbols and units |
| ISO 8625-2:1991 | Aerospace Fluid systems Vocabulary Part 2: General terms and definitions relating to flow |
| ISO 8778:2003 | Pneumatic fluid power — Standard reference atmosphere |
| ISO 3529-3:2014 | Vacuum technology Vocabulary Part 3: Total and partial pressure vacuum gauges |
| ISO 1998-6:2000 | Petroleum industry — Terminology — Part 6: Measurement |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO 4391:1983 | Hydraulic fluid power Pumps, motors and integral transmissions Parameter definitions and letter symbols |
| ISO 1219-2:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 1998-99:2000 | Petroleum industry — Terminology — Part 99: General and index |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| ISO 8625-1:1993 | Aerospace Fluid systems Vocabulary Part 1: General terms and definitions related to pressure |
| ISO 1998-2:1998 | Petroleum industry Terminology Part 2: Properties and tests |
| ISO 1998-1:1998 | Petroleum industry Terminology Part 1: Raw materials and products |
| ISO 3857-2:1977 | Compressors, pneumatic tools and machines — Vocabulary — Part 2: Compressors |
| ISO 1998-7:1998 | Petroleum industry Terminology Part 7: Miscellaneous terms |
| ISO 3857-1:1977 | Compressors, pneumatic tools and machines — Vocabulary — Part 1: General |
| ISO 3529-2:1981 | Vacuum technology — Vocabulary — Part 2: Vacuum pumps and related terms |
| ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
| ISO 3529-1:1981 | Vacuum technology — Vocabulary — Part 1: General terms |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
| ISO 2944:2000 | Fluid power systems and components — Nominal pressures |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
| ISO 4006:1991 | Measurement of fluid flow in closed conduits — Vocabulary and symbols |
| ISO 14050:2009 | Environmental management Vocabulary |
| ISO 8625-3:1991 | Aerospace Fluid systems Vocabulary Part 3: General terms and definitions relating to temperature |
US$251.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.