ISO 594-1 : 1986

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Preview

CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS

Publisher: International Organization for Standardization

Published:

Available Formats: PDF - French, Hardcopy - French, PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

National foreword
Committees responsible
Specification
0. Introduction
1. Scope and field of application
2. References
3. Dimensions
4. Requirements
5. Test methods
Annex
Liquid leakage
Table
Dimensions of 6% (Luer) conical fittings
Figures
1. Typical 6% (Luer) conical fittings
2. Typical assembly of 6% (Luer) conical fittings
3. Gauges for testing 6% (Luer) conical fittings
4. Reference steel female conical fitting
5. Reference steel male conical fitting

Abstract - (Show below) - (Hide below)

Deals with measurements and efficiency for rigid and semi-rigid Luer slip fittings.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Withdrawn
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 84
Supersedes	ISO/R 594 : 1967
Superseded By	ISO 80369-7 : 2016

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS ISO 594-1 : 1989	Identical
NF EN 20594-1 : 93 AMD 1 98	Identical
NBR ISO 594-1 : 2003	Identical
NEN ISO 594-1 : 1994 AMD 1 1997	Identical
NS ISO 594-1 : 93 AMD 1 98	Identical
I.S. EN 20594-1:1994	Identical
PN EN 20594-1 : 2001	Identical
SAC GB/T 1962-1 : 2015	Identical
SN EN 20594-1 : 1995 AMD 1 1997	Identical
SNV NF EN 20594-1 : 1993	Identical
UNI EN 20594-1 : 1994	Identical
AS 1600.1-2004	Identical
BIS IS 3234-1 : 1986(R2017)	Identical
BS EN 20594-1 : 1994	Identical
UNE EN 20594-1 : 1994	Identical
EN 20594-1 : 93 AMD 1 97	Similar to
DIN EN 20594-1 : 1995	Identical
DIN EN 20594-1 E : 1995	Identical
AS 1600.1-2004	Identical
SAC GB/T 1962-1 : 2015	Identical
PN EN 20594-1 : 2001	Identical
NS ISO 594-1 : 93 AMD 1 98	Identical
DS ISO 594-1 : 1989	Identical
AS 1600.1-1988	Identical
BS 3930-1(1987) : AMD 8072	Identical
NEN ISO 594-1 : 1994 AMD 1 1997	Identical
BIS IS 3234-1 : 1986(R2017)	Identical
NBR ISO 594-1 : 2003	Identical
SNV NF EN 20594-1 : 1993	Identical
DIN EN 20594-1 E : 1995	Identical
DIN EN 20594-1 : 1995	Identical
BS EN 20594-1 : 1994	Identical
UNE EN 20594-1 : 1994	Identical
UNE EN 20594-1 : 1994	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

AAMI ISO 5366-1 : 2000	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 1: TUBES AND CONNECTORS FOR USE IN ADULTS
UNI CEI EN 15546-1 : 2009	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
BS 1263-2(1989) : 1990 AMD 8542	REUSABLE HYPODERMIC SYRINGES FOR MEDICAL USE - SPECIFICATION FOR DESIGN AND PERFORMANCE OF ALL GLASS AND METAL AND GLASS SYRINGES
ONORM EN ISO 11070 : 2015	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014)
UNI EN ISO 81060-1 : 2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
16/30339096 DC : 0	BS EN ISO 7886-3 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION
06/30160058 DC : 0	BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
DIN EN 80369-5 E : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS (IEC 80369-5:2016 + COR.1:2017)
09/30173644 DC : 0	BS EN ISO 80369-1 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
I.S. EN ISO 81060-1:2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE (ISO 81060-1:2007)
DIN EN ISO 10555-6 E : 2017	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015)
BS EN ISO 25539-1 : 2017	CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES
AAMI HE75 : 2009	HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES
BS EN ISO 80601-2-72 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
ISO 14972 : 1998(R2005)	STERILE OBTURATORS FOR SINGLE USE WITH OVER-NEEDLE PERIPHERAL INTRAVASCULAR CATHETERS
BS 3487-2(1993) : 1993	TRACHEAL TUBES - ORO-TRACHEAL AND NASO-TRACHEAL TUBES OF THE MAGILL TYPE (PLAIN AND CUFFED)
NF ISO 28620 : 2010	MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES
CSA ISO 5361 : 2014	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS
10/30212297 DC : 0	BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES
13/30283691 DC : 0	BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED
06/30159274 DC : 0	BS EN 80601-2-30 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED TYPE NON-INVASIVE SPHYGMOMANOMETERS
12/30228200 DC : 0	BS ISO 8600-1 - ENDOSCOPES - MEDICAL ENDOSCOPES AND ENDOTHERAPY DEVICES - PART 1: GENERAL REQUIREMENTS
AAMI ISO 81060-1 : 2007	NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
CSA Z8836 : 2011	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
BS ISO 11712 : 2009	ANAESTHETIC AND RESPIRATORY EQUIPMENT - SUPRALARYNGEAL AIRWAYS AND CONNECTORS
BS ISO 10555-6 : 2015	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS
BS EN ISO 8836 : 2014	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014)
11/30235362 DC : 0	BS EN ISO 10555-3 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 3: CENTRAL VENOUS CATHETERS
BS ISO 8600-1 : 2015	ENDOSCOPES - MEDICAL ENDOSCOPES AND ENDOTHERAPY DEVICES - PART 1: GENERAL REQUIREMENTS
13/30276989 DC : 0	BS EN ISO 11070 - STERILE, SINGLE-USE INTRAVASCULAR CATHETER INTRODUCERS
BS EN ISO 1135-5 : 2015	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS
BS EN ISO 1135-3 : 2017	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
13/30264413 DC : 0	BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
16/30340380 DC : 0	BS EN 80601-2-30 ED 2.0 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
07/30147572 DC : DRAFT SEP 2007	BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS
BS ISO 7886-2 : 1996 AMD 9835	STERILE HYPODERMIC SYRINGES FOR SINGLE USE - SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS
DIN EN ISO 80601-2-72 E : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
CSA ISO 5366-1 : 2014	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 1: TUBES AND CONNECTORS FOR USE IN ADULTS
I.S. EN ISO 80369-6:2016	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO/IEC/DIS 80369-6:2014)
BS ISO 6710 : 1995	SINGLE-USE CONTAINERS FOR VENOUS BLOOD SPECIMEN COLLECTIONS
14/30298693 DC : 0	BS ISO 18250-8 - CONNECTORS FOR RESERVOIR DELIVERY SYSTEMS FOR HEALTHCARE APPLICATIONS - PART 8: CITRATE-BASED ANTICOAGULANT SOLUTION FOR APHERESIS APPLICATIONS
I.S. EN ISO 1135-5:2015	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
15/30289037 DC : 0	BS EN ISO 7886-1 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 1: SYRINGES FOR MANUAL USE
14/30296389 DC : 0	BS EN ISO 7864 - STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS
15/30300279 DC : 0	BS ISO 80601-2-74 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-74: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY HUMIDIFYING EQUIPMENT
BS ISO 18190 : 2016	ANAESTHETIC AND RESPIRATORY EQUIPMENT - GENERAL REQUIREMENTS FOR AIRWAYS AND RELATED EQUIPMENT
BS EN ISO 81060-1 : 2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
DIN EN 15546-1 : 2008	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 1135-5 : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
DIN EN ISO 80601-2-72 : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
AAMI IEC 80601-2-30 : 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
DKD-R 4-1:2018	BLOOD PRESSURE TRANSDUCERS
DIN EN ISO 1135-3 : 2014	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
UNE EN ISO 80369-7 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
02/564514 DC : DRAFT OCT 2002	BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
DIN EN ISO 1135-3 E : 2017	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
14/30281859 DC : 0	BS ISO 5361 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS
13/30273499 DC : 0	BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
AAMI ISO 81060-1 : 2007	NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
DIN 254 E : 2003	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES - VALUES FOR SETTING TAPER ANGLES AND SETTING HEIGHTS
DIN EN ISO 8836 E : 2015	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014)
09/30203808 DC : 0	BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
DIN EN 15546-1 E : 2008	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
CSA Z10651.2 : 2006	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
13/30255554 DC : 0	BS EN ISO 80369-7 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS WITH 6% (LUER) TAPER FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS
AAMI ISO 80369-5 : 2016	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS
DIN 254 : 2003-04	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES - VALUES FOR SETTING TAPER ANGLES AND SETTING HEIGHTS
02/564513 DC : DRAFT OCT 2002	BS EN ISO 1135-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE
EN ISO 11070:2014	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014)
BS EN 60601-2-12 : 2006	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS
15/30288418 DC : 0	BS EN ISO 80369-2 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 2: CONNECTORS FOR BREATHING SYSTEMS AND DRIVING GASES APPLICATIONS
14/30303657 DC : 0	BS EN ISO 1135-3 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SET FOR SINGLE USE
DIN ISO 11040-4 E : 2017	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
14/30292519 DC : 0	BS EN 80369-5 ED 1.0 - SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS
DIN EN ISO 22413 E : 2013	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010)
ISO 11040-6 : 2012	PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES
DIN EN ISO 80369-7 E : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
10/30209612 DC : 0	BS ISO 1119 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES
14/30288421 DC : 0	BS EN ISO/IEC 80369-6 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS
NBR ISO 10555-3 : 2003	STERILE, SINGLE-USE INTRAVASCULAR CATHETER - PART 3: CENTRAL VENOUS CATHETER
BS EN ISO 5361 : 2016	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS (ISO 5361:2016)
NBR ISO 10555-5 : 2003	STERILE, SINGLE-USE INTRAVASCULAR CATHETER - PART 5: OVER-NEEDLE PERIPHERAL CATHETER
BS 3930-2(1991) : 1991	CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND OTHER MEDICAL EQUIPMENT - SPECIFICATION FOR LOCK FITTINGS
BS ISO 28620 : 2010	MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES
UNI EN ISO 80601-2-12 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
DIN EN ISO 1135-5 E : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
08/30170025 DC : DRAFT AUG 2008	BS ISO 28620 - MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES
12/30266576 DC : 0	BS EN 13718-2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES
06/30153337 DC : DRAFT JULY 2006	BS EN 15546-1 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
DIN ISO 11040-4 : 2007	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
11/30235338 DC : 0	BS EN ISO 10555-5 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 5: OVER-NEEDLE PERIPHERAL CATHETERS
BS ISO 22413 : 2010	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 8836 : 2015	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014
BS EN 15546-1 : 2008	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
11/30235365 DC : 0	BS EN ISO 10555-4 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS
AAMI ISO 81060-1 : 2007 : R2013	NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
14/30294895 DC : 0	BS EN ISO 8537 - STERILE SINGLE-USE SYRINGES, WITH OR WITHOUT NEEDLE, FOR INSULIN
BS EN 80601-2-30 : 2010	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
13/30283694 DC : 0	BS EN ISO 1135-5 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS
BS EN ISO 22413 : 2013	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010)
03/103293 DC : DRAFT JAN 2003	BS EN ISO 10651-2 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
16/30346835 DC : 0	BS ISO 20789 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - PASSIVE HUMIDIFIERS
AAMI ID54 : 1996 : R2005	ENTERAL FEEDING SET ADAPTERS AND CONNECTORS
DIN EN ISO 81060-1 E : 2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE (ISO 81060-1:2007)
11/30228364 DC : 0	BS EN ISO 10555-1 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS
CSA Z8836 : 2011 : FR	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
BS ISO 11040-4 : 2015	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
BS ISO 81060-1 : 2007 COR 2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
CSA Z10651.6 : 2006 : R2015	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
AAMI ISO 25539-1 : 2017	CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES
I.S. EN ISO 10555-1:2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017)
CSA Z10651.6 : 2006	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
PREN ISO 1119 : DRAFT 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES
NF EN ISO 80601-2-12 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
UNI EN ISO 8836 : 2015	A SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
03/103294 DC : DRAFT JAN 2003	BS EN ISO 10651-6 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME CARE VENTILATORY SUPPORT DEVICES
ISO 5366-2 : 1993	TRACHEOSTOMY TUBES - BASIC REQUIREMENTS FOR TUBES FOR ADULTS
CSA C22.2 No. 80601-2-72 : 2017	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
UNE EN ISO 8836 : 2015	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014)
DIN EN ISO 11070 E : 2015	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014)
CSA Z10651.6 : 2006	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
UNE EN 80369-5 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS
06/30137313 DC : 0	ISO/IEC 81060-1 - NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR MECHANICAL TYPE
BS ISO 14972 : 1998	STERILE OBTURATORS FOR SINGLE USE WITH OVER-NEEDLE PERIPHERAL INTRAVASCULAR CATHETERS
NF EN 80601-2-30 : 2011 AMD 1 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
ASTM F 2560 : 2006	Standard Specification for Supralaryngeal Airways and Connectors
IEC 80601-2-30 REDLINE : 2ED 2018	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
DIN 13098-1 : 1992	SINGLE USE PLASTICS SYRINGES FOR MEDICAL PURPOSES - SINGLE USE PLASTICS SYRINGES FOR GENERAL USE - DIMENSIONS, REQUIREMENTS, TEST
CSA Z10651.2 : 2006	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
DIN EN ISO 22413 : 2013	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010)
CSA Z8836 : 2011 : R2015	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
CSA Z8836 : 2011	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
DIN EN ISO 81060-1 : 2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE (ISO 81060-1:2007)
BS EN ISO 10555-1 : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS
ISO 80369-6 : 2016 [Corrected]	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS
I.S. EN ISO 5361:2016	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS (ISO/DIS 5361:2014)
AAMI ID54 : 1996	ENTERAL FEEDING SET ADAPTERS AND CONNECTORS
I.S. EN ISO 80369-7:2017 COR 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
DIN EN ISO 80369-7 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
CSA Z10651.2 : 2006 : R2015	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
UNE EN ISO 11070 : 2015	Sterile single-use intravascular introducers, dilators and guidewires (ISO 11070:2014)
CSA C22.2 No. 80601-2-30 : 2010	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
PREN ISO 80369-1 : DRAFT 2009	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 80601-2-30 : 2010 : INC : COR 1 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
CSA C22.2 No. 80601-2-30 : 2010FR	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
CSA C22.2 No. 80601-2-30 : 2010 : R2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
CEI EN 60601-2-12 : 2007	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS
AAMI ISO 5361 : 2012	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS
CSA C22.2 No. 60601.2.12 : 2003	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS
AAMI HE75 : 2009(R2013)	HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES
ISO 11712 : 2009(R2015)	ANAESTHETIC AND RESPIRATORY EQUIPMENT - SUPRALARYNGEAL AIRWAYS AND CONNECTORS
BS 6149-2(1993) : 1993	TRACHEOSTOMY TUBES - BASIC REQUIREMENTS FOR TUBES FOR ADULTS
BS EN ISO 11070 : 2014	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES
I.S. EN ISO 22413:2013	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010)
AAMI ISO 5366-3 : 2001	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 3: PAEDIATRIC TRACHEOSTOMY TUBES
AAMI HE75 :2009	HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES
I.S. EN ISO 25539-1:2017	CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017)
BIS IS 12227 : 2002(R2017)	STERILE SINGLE-USE SYRINGES, WITH OR WITHOUT NEEDLE, FOR INSULIN
AAMI ISO 80369-6 : 2016	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS
I.S. EN ISO 1135-3:2017	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
AMEDP-1.15 : 2016	COMPATIBILITY OF MEDICAL TUBING AND CONNECTORS IN THE FIELD
I.S. EN 80601-2-30:2010	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
AAMI ISO 80369-7 : 2016	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS
AAMI BP22 : 1994 : R2016	BLOOD PRESSURE TRANSDUCERS
AAMI BP22 : 1994 : R2011	BLOOD PRESSURE TRANSDUCERS
AAMI ID54 : 1996 : R2012	ENTERAL FEEDING SET ADAPTERS AND CONNECTORS
AAMI BP22 : 1994	BLOOD PRESSURE TRANSDUCERS
AAMI ISO 8836 : 2015	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
I.S. EN 80369-5:2016	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS
BS EN ISO 80601-2-12 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO/IEC 80601-2-12:2011)
ISO 10555-1 : 2013(R2018)	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS
ISO 5361-2 : 1993	TRACHEAL TUBES - ORO-TRACHEAL AND NASO TRACHEAL TUBES OF THE MAGILL TYPE (PLAIN AND CUFFED)
I.S. EN ISO 80601-2-72:2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
I.S. EN ISO 80601-2-12:2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
UNE EN ISO 1135-5 : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
ISO/DIS 80601-2-84 : 40.20 (2018)	MEDICAL ELECTRICAL EQUIPMENT - PART 2-84: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF EMERGENCY AND TRANSPORT VENTILATORS
CSA ISO 11712 : 2014	ANAESTHETIC AND RESPIRATORY EQUIPMENT - SUPRALARYNGEAL AIRWAYS AND CONNECTORS
BS 5081-1(1994) : 1994	STERILE HYPODERMIC SYRINGES AND NEEDLES - SPECIFICATION FOR STERILE, SINGLE-USE HYPODERMIC SYRINGES FOR MANUAL USE
NBR ISO 10555-4 : 2003	STERILE, SINGLE-USE INTRAVASCULAR CATHETER - PART 4: BALLOON DILATATION CATHETERS
AAMI CN6 : 2015	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS
ISO 594-2 : 1998	CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 2: LOCK FITTINGS
ISO 18190 : 2016	ANAESTHETIC AND RESPIRATORY EQUIPMENT - GENERAL REQUIREMENTS FOR AIRWAYS AND RELATED EQUIPMENT
CSA Z5361 : 2003	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS
EN ISO 10555-1 : 2013 AMD 1 2017	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017)
I.S. EN ISO 11070:2014	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014)
CSA ISO 11712 : 2014 : R 2019	ANAESTHETIC AND RESPIRATORY EQUIPMENT - SUPRALARYNGEAL AIRWAYS AND CONNECTORS
UNE EN ISO 1135-3 : 2017	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
DIN EN ISO 10555-6 : 2017	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015)
EN ISO 80369-6 : 2016 COR 2016	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO 80369-6:2016, CORRECTED VERSION 2016-11-15)
BS 6149-2(1986) : 1986	TRACHEOSTOMY TUBES - SPECIFICATION FOR TUBES (EXCLUDING CONNECTORS)
UNE EN ISO 80369-6 : 2016	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO 80369-6:2016, CORRECTED VERSION 2016-11-15)
NBR ISO 10555-1 : 2003	STERILE, SINGLE-USE INTRAVASCULAR CATHETER - PART 1: GENERAL REQUIREMENTS
BS EN ISO 10555-6 : 2017	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015)
DIN EN ISO 11070 : 2015	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014)
ISO 28620 : 2010	MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES
ISO 8600-1 : 2015	ENDOSCOPES - MEDICAL ENDOSCOPES AND ENDOTHERAPY DEVICES - PART 1: GENERAL REQUIREMENTS
08/30184486 DC : DRAFT JUNE 2008	BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE
DIN EN 80369-5 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS (IEC 80369-5:2016 + COR.1:2017)
I.S. EN 15546-1:2008	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
UNI EN ISO 5361 : 2013	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS
CSA C22.2 No. 80601-2-12 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
BS EN ISO 80369-6 : 2016	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS
UNI EN ISO 11070 : 2015	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES
UNE EN ISO 5361 : 2017	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS (ISO 5361:2016)
BS ISO 11040-6 : 2012	PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES
CSA ISO 5366-3 : 2014	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 3: PAEDIATRIC TRACHEOSTOMY TUBES
ISO 11070 : 2014	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES
ISO 5366-3 : 2001	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 3: PAEDIATRIC TRACHEOSTOMY TUBES
I.S. EN 60601-2-12:2006	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS
ISO 11040-4 : 2015	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
ISO 595-2 : 1987	REUSABLE ALL GLASS OR METAL AND GLASS SYRINGES FOR MEDICAL USE - PART 2: DESIGN, PERFORMANCE REQUIREMENTS AND TESTS
ISO 10555-6 : 2015	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS
I.S. EN ISO 8836:2014	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014)
IEC 80369-5 : 2016 COR 1 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS
IEC 80601-2-30 : 2.0	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
ISO 8836 : 2014	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
EN ISO 8536-4 : 2013 AMD 1 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010/AMD 1:2013)
EN ISO 80601-2-12 : 2011 COR 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
ISO 80601-2-12 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
I.S. EN ISO 8536-4:2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010)
BS EN ISO 8536-4 : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
DIN EN ISO 10651-6 : 2011	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
DIN EN ISO 1135-4 : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015)
DIN EN ISO 3549 E : 2002	ZINC DUST PIGMENTS FOR PAINTS - SPECIFICATIONS AND TEST METHODS
DIN EN 1782 : 2009	TRACHEAL TUBES AND CONNECTORS
DIN EN ISO 10555-4 : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS (ISO 10555-4:2013)
DIN EN ISO 1119 E : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011)
DIN EN 13544-1 E : 2009	RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
DIN EN ISO 1119 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011)
DIN EN ISO 10651-6 E : 2011	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
DIN EN ISO 10555-5 : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 5: OVER-NEEDLE PERIPHERAL CATHETERS (ISO 10555-5:2013)
DIN EN 13718-2 E : 2015	MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
DIN EN 14820 E : 2004	SINGLE-USE CONTAINERS FOR HUMAN VENOUS BLOOD SPECIMEN COLLECTION
DIN EN ISO 1135-4 E : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015)
DIN EN ISO 8536-4 E : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013)
DIN EN ISO 8536-4 : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013)
DIN EN 13544-1 : 2009	RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
DIN EN 13718-2 : 2015	MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
DIN EN 14820 : 2004	SINGLE-USE CONTAINERS FOR HUMAN VENOUS BLOOD SPECIMEN COLLECTION
DIN EN ISO 10555-4 E : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS (ISO 10555-4:2013)
BS EN ISO 7864 : 2016	STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS (ISO 7864:2016)
BS EN 1782 : 1998	TRACHEAL TUBES AND CONNECTORS
EN 13718-2 : 2015	MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
DIN EN ISO 10555-5 E : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 5: OVER-NEEDLE PERIPHERAL CATHETERS (ISO 10555-5:2013)
ISO 10555-5 : 2013(R2013)	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 5: OVER-NEEDLE PERIPHERAL CATHETERS
ISO 81060-1 : 2007(R 2017)	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
ISO 22413 : 2010	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS
ISO 25539-1 : 2017	CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES
UNE EN ISO 1119 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011)
UNE EN ISO 1135-4 : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015)
UNE EN ISO 8537 : 2016	STERILE SINGLE-USE SYRINGES, WITH OR WITHOUT NEEDLE, FOR INSULIN (ISO 8537:2016)
BS EN ISO 7886-2 : 1997	STERILE HYPODERMIC SYRINGES FOR SINGLE USE - SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS
ISO 10555-4 : 2013(R2018)	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS
BS EN 14820 : 2004	SINGLE-USE CONTAINERS FOR HUMAN VENOUS BLOOD SPECIMEN COLLECTION
BS EN ISO 10555-4 : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS (ISO 10555-4:2013)
ISO 1135-5 : 2015	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS
UNI EN ISO 8536-4 : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
UNE EN ISO 10555-5 : 2014	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 5: OVER-NEEDLE PERIPHERAL CATHETERS (ISO 10555-5:2013)
UNE EN 13718-2 : 2015	MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
ISO 10651-2 : 2004	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
BS EN ISO 1135-4 : 2015	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED
ISO 7886-2 : 1996(R2006)	STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 2: SYRINGES FOR USE WITH POWER-DRIVEN PUMPS
UNE EN ISO 8536-4 : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010/AMD 1:2013)
BS EN ISO 3549 : 2002	ZINC DUST PIGMENT FOR PAINTS - SPECIFICATIONS AND TEST METHODS
UNE EN ISO 10555-4 : 2014	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS (ISO 10555-4:2013)
BS EN ISO 1119 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011)
ISO 1119 : 2011(R2017)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES
ISO 1135-3 : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE
BS EN 1615 : 2000	ENTERAL FEEDING CATHETERS AND ENTERAL GIVING SETS FOR SINGLE USE AND THEIR CONNECTORS - DESIGN AND TESTING
BS EN ISO 10651-6 : 2009	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
BS EN 13544-1 : 2007	RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
ISO 80601-2-72 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
ISO 1135-4 : 2015	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED
UNE EN ISO 22413 : 2013	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010)
BS EN ISO 8537 : 2016	STERILE SINGLE-USE SYRINGES, WITH OR WITHOUT NEEDLE, FOR INSULIN
ISO 80369-7 : 2016	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS
ISO 7864 : 2016	STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS
BS EN ISO 10555-5 : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 5: OVER-NEEDLE PERIPHERAL CATHETERS (ISO 10555-5:2013)
BS EN 13718-2 : 2015	MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
BS EN ISO 10651-2 : 2004	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
ISO 10651-6 : 2004	LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
ISO 5361 : 2016	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS
ISO 8536-4 : 2010	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
UNE EN ISO 11070 : 2015	Sterile single-use intravascular introducers, dilators and guidewires (ISO 11070:2014)
ISO 8537 : 2016	STERILE SINGLE-USE SYRINGES, WITH OR WITHOUT NEEDLE, FOR INSULIN
I.S. EN 13718-2:2015	MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
ISO 3549 : 1995(R2016)	ZINC DUST PIGMENT FOR PAINTS - SPECIFICATIONS AND TEST METHODS
BS EN ISO 5366-1 : 2004	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 1: TUBES AND CONNECTORS FOR USE IN ADULTS
UNE EN ISO 7864 : 2017	STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS (ISO 7864:2016)
I.S. EN 13718-2:2015+A1:2020	MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES
BS EN 30-1-2 : 2012	DOMESTIC COOKING APPLIANCES BURNING GAS - SAFETY - PART 1-2: APPLIANCES HAVING FORCED-CONVECTION OVENS AND/OR GRILLS
ISO 5366-1 : 2000	ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 1: TUBES AND CONNECTORS FOR USE IN ADULTS
CSA C22.2 No. 80601-2-12 : 2012(R2017)	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS

Standards Referencing This Book - (Show below) - (Hide below)

ISO 7886 : 1984	STERILE HYPODERMIC SYRINGES FOR SINGLE USE
ISO 594-2 : 1998	CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 2: LOCK FITTINGS

Add To Cart

Product Format

Quantity

add to cart

ISO 594-1 : 1986

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?