ISO 594-2 : 1998

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Preview

CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 2: LOCK FITTINGS

Publisher: International Organization for Standardization

Published:

Available Formats: PDF - French, Hardcopy - French, PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Contents
1. Scope
2. Normative references
3. Dimensions and tolerances
4. Requirements
5. Test methods

Abstract - (Show below) - (Hide below)

Specifies requirements for conical lock fittings with a 6% (Luer) taper for use with hypodermic syringes and needles and with certain other apparatus for medical use.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Withdrawn
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 84
Supersedes	ISO/R 594 : 1967
Superseded By	ISO 80369-7 : 2016

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
AS 1600.2-2003	Identical
DIN EN 1707 E : 1997	Identical
NBR ISO 594-2 : 2003	Identical
BS 3930-2(1991) : 1991	Identical
SAC GB/T 1962-2 : 2001	Identical
DIN EN 1707 : 1997	Identical
NBR ISO 594-2 : 2003	Identical
SAC GB/T 1962-2 : 2001	Identical
DIN EN 1707 : 1997	Identical
DIN EN 1707 E : 1997	Identical
BS 3930-2(1991) : 1991	Identical
AS 1600.2-2003	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

AAMI ISO 8638 : 2010	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HEMODIALYZERS, HEMODIAFILTERS AND HEMOFILTERS
BS 1263-2(1989) : 1990 AMD 8542	REUSABLE HYPODERMIC SYRINGES FOR MEDICAL USE - SPECIFICATION FOR DESIGN AND PERFORMANCE OF ALL GLASS AND METAL AND GLASS SYRINGES
ONORM EN ISO 11070 : 2015	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014)
DIN ISO 8536-12 E : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 12: CHECK VALVES (ISO 8536-12:2007 + AMD. 1:2012)
UNI EN ISO 81060-1 : 2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
BS EN ISO 80601-2-13 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
ISO 13960 : 2010	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - PLASMAFILTERS
16/30339096 DC : 0	BS EN ISO 7886-3 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION
06/30160058 DC : 0	BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
DIN EN 80369-5 E : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS (IEC 80369-5:2016 + COR.1:2017)
09/30173644 DC : 0	BS EN ISO 80369-1 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 3826-4 E : 2015	PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES (ISO 3826-4:2015)
DIN EN ISO 8637 : 2014	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS (ISO 8637:2010, INCLUDING AMENDMENT 1:2013-04-01)
BS EN ISO 25539-1 : 2017	CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES
NF EN ISO 8835-3 : 2009 AMD 1 2011	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
AAMI HE75 : 2009	HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES
DIN EN ISO 7199 E : 2017	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) (ISO 7199:2016)
14/30296389 DC : 0	BS EN ISO 7864 - STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS
BS EN ISO 80601-2-72 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
ISO 14972 : 1998(R2005)	STERILE OBTURATORS FOR SINGLE USE WITH OVER-NEEDLE PERIPHERAL INTRAVASCULAR CATHETERS
AAMI RD17 : 2007	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - EXTRACORPOREAL BLOOD CIRCUIT FOR HEMODIALYZERS, HEMODIAFILTERS AND HEMOFILTERS
NF ISO 28620 : 2010	MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES
10/30212297 DC : 0	BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES
13/30283691 DC : 0	BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED
12/30228200 DC : 0	BS ISO 8600-1 - ENDOSCOPES - MEDICAL ENDOSCOPES AND ENDOTHERAPY DEVICES - PART 1: GENERAL REQUIREMENTS
BS EN ISO 8835-3 : 2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
AAMI ISO 81060-1 : 2007	NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
CSA Z8836 : 2011	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
01/561789 DC : DRAFT APR 2001	BS ISO 13960 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - PLASMAFILTERS
BS ISO 15675 : 2009	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS
BS EN ISO 8836 : 2014	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014)
BS ISO 8600-1 : 2015	ENDOSCOPES - MEDICAL ENDOSCOPES AND ENDOTHERAPY DEVICES - PART 1: GENERAL REQUIREMENTS
13/30276989 DC : 0	BS EN ISO 11070 - STERILE, SINGLE-USE INTRAVASCULAR CATHETER INTRODUCERS
BS EN ISO 1135-5 : 2015	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS
BS EN ISO 1135-3 : 2017	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
UNI EN ISO 8835-2 : 2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS
16/30331656 DC : 0	BS ISO 8637-3 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 3: PLASMAFILTERS
13/30264413 DC : 0	BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
16/30340380 DC : 0	BS EN 80601-2-30 ED 2.0 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
07/30147572 DC : DRAFT SEP 2007	BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS
BS ISO 7886-2 : 1996 AMD 9835	STERILE HYPODERMIC SYRINGES FOR SINGLE USE - SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS
DIN EN ISO 80601-2-72 E : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
BS EN ISO 80369-7 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS
DIN EN ISO 8637 E : 2014	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS (ISO 8637:2010, INCLUDING AMENDMENT 1 2013-04-01)
06/30159274 DC : 0	BS EN 80601-2-30 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED TYPE NON-INVASIVE SPHYGMOMANOMETERS
CSA Z8638 : 2008	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS
14/30298693 DC : 0	BS ISO 18250-8 - CONNECTORS FOR RESERVOIR DELIVERY SYSTEMS FOR HEALTHCARE APPLICATIONS - PART 8: CITRATE-BASED ANTICOAGULANT SOLUTION FOR APHERESIS APPLICATIONS
04/30099768 DC : DRAFT DEC 2004	PREN ISO 8835-3 - INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: ANAESTHETIC GAS SCAVENGING SYSTEMS - TRANSFER AND RECEIVING SYSTEMS
16/30331650 DC : 0	BS EN ISO 8637-1 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 1: HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
I.S. EN ISO 1135-5:2015	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
15/30289037 DC : 0	BS EN ISO 7886-1 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 1: SYRINGES FOR MANUAL USE
15/30300279 DC : 0	BS ISO 80601-2-74 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-74: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY HUMIDIFYING EQUIPMENT
BS EN ISO 81060-1 : 2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
13/30284773 DC : 0	BS EN ISO 8536-10 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR USE WITH PRESSURE INFUSION EQUIPMENT
AAMI ISO 15675 : 2016	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS
08/30179586 DC : DRAFT MAR 2008	BS ISO 7199 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS)
DIN EN ISO 1135-5 : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
DIN EN ISO 80601-2-72 : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
AAMI IEC 80601-2-30 : 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
DKD-R 4-1:2018	BLOOD PRESSURE TRANSDUCERS
DIN EN ISO 1135-3 : 2014	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
02/564514 DC : DRAFT OCT 2002	BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
UNE EN ISO 80369-7 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
DIN EN ISO 1135-3 E : 2017	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
AAMI ISO 8637 : 2010	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HEMODIALYZERS, HEMODIAFILTERS, HEMOFILTERS AND HEMOCONCENTRATORS
13/30273499 DC : 0	BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
DIN EN ISO 8835-3 E : 2011	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
15/30321715 DC : 0	BS ISO 15675 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS
DIN 254 E : 2003	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES - VALUES FOR SETTING TAPER ANGLES AND SETTING HEIGHTS
DIN EN ISO 8836 E : 2015	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014)
09/30203808 DC : 0	BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
02/564515 DC : DRAFT OCT 2002	BS EN ISO 8536-8 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 8: INFUSION SETS FOR USE WITH PRESSURE INFUSION EQUIPMENT
13/30255554 DC : 0	BS EN ISO 80369-7 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS WITH 6% (LUER) TAPER FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS
AAMI ISO 80369-5 : 2016	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS
AAMI ISO 7199 : 2009	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS)
BS EN ISO 3826-4 : 2015	PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHAERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES
DIN 254 : 2003-04	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES - VALUES FOR SETTING TAPER ANGLES AND SETTING HEIGHTS
02/564513 DC : DRAFT OCT 2002	BS EN ISO 1135-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE
CSA ISO 8638 : 2012	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS
13/30284776 DC : 0	BS EN ISO 8536-11 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 11: INFUSION FILTERS FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT
BS ISO 8536-12 : 2007	INFUSION EQUIPMENT FOR MEDICAL USE - PART 12: CHECK VALVES
EN ISO 11070:2014	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014)
AAMI ISO 81060-1 : 2007	NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
02/564516 DC : DRAFT OCT 2002	BS EN ISO 8536-9 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 9: FLUID LINES FOR USE WITH PRESSURE INFUSION EQUIPMENT
15/30288418 DC : 0	BS EN ISO 80369-2 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 2: CONNECTORS FOR BREATHING SYSTEMS AND DRIVING GASES APPLICATIONS
14/30303657 DC : 0	BS EN ISO 1135-3 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SET FOR SINGLE USE
DIN ISO 11040-4 E : 2017	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
13/30284770 DC : 0	BS EN ISO 8536-9 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 9: FLUID LINES FOR USE WITH PRESSURE INFUSION EQUIPMENT
DIN EN ISO 8835-3 : 2011	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
DIN EN ISO 3826-4 : 2015	PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHAERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES (ISO 3826-4:2015)
DIN EN ISO 8638 : 2014	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS (ISO 8638:2010)
DIN EN ISO 22413 E : 2013	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010)
ISO 11040-6 : 2012	PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES
CSA Z8637 : 2008	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
DIN EN ISO 80369-7 E : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
CSA ISO 8637 : 2012	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
BS ISO 28620 : 2010	MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES
BS EN ISO 7199 : 2017	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) (ISO 7199:2016)
15/30321712 DC : 0	BS ISO 15674 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS
15/30321957 DC : 0	BS EN ISO 7199 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS BLOOD-GAS EXCHANGERS (OXYGENATORS)
UNI EN ISO 80601-2-12 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
DIN EN ISO 1135-5 E : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
08/30170025 DC : DRAFT AUG 2008	BS ISO 28620 - MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES
ISO 8536-12 : 2007(R2016)	INFUSION EQUIPMENT FOR MEDICAL USE - PART 12: CHECK VALVES
13/30284721 DC : 0	BS EN ISO 8536-8 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 8: INFUSION EQUIPMENT FOR USE WITH PRESSURE INFUSION APPARATUS
08/30179589 DC : DRAFT MAR 2008	BS ISO 15674 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS
DIN ISO 8536-12 : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 12: CHECK VALVES (ISO 8536-12:2007 + AMD. 1:2012)
DIN ISO 11040-4 : 2007	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
CSA ISO 8638 : 2012	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS
BS ISO 22413 : 2010	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS
UNI EN ISO 8835-3 : 2010	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
BS 5724-2.16(1998) : 1998	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - PARTICULAR REQUIREMENTS FOR THE SAFETY OF HAEMODIALYSIS, HAEMODIAFILTRATION AND HAEMOFILTRATION EQUIPMENT
11/30235365 DC : 0	BS EN ISO 10555-4 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS
AAMI ISO 81060-1 : 2007 : R2013	NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
15/30275221 DC : 0	BS ISO 18241 - CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOPULMONARY BYPASS SYSTEMS - VENOUS BUBBLE TRAPS
BS ISO 18241 : 2016	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOPULMONARY BYPASS SYSTEMS - VENOUS BUBBLE TRAPS
BS EN 80601-2-30 : 2010	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
BS EN ISO 8638 : 2014	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS
DIN EN ISO 8638 E : 2014	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS (ISO 8638:2010)
BS 3930-1(1987) : AMD 8072	CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND OTHER MEDICAL EQUIPMENT - SPECIFICATION FOR GENERAL REQUIREMENTS
13/30283694 DC : 0	BS EN ISO 1135-5 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS
BS 1263-1(1989) : 1989	REUSABLE HYPODERMIC SYRINGES FOR MEDICAL USE - SPECIFICATION FOR DIMENSIONS OF ALL GLASS AND METAL GLASS SYRINGES
16/30331653 DC : 0	BS EN ISO 8637-2 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 2: EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS
BS EN ISO 22413 : 2013	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010)
02/565260 DC : DRAFT DEC 2002	ISO 8638 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
16/30346835 DC : 0	BS ISO 20789 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - PASSIVE HUMIDIFIERS
AAMI ID54 : 1996 : R2005	ENTERAL FEEDING SET ADAPTERS AND CONNECTORS
02/564517 DC : DRAFT OCT 2002	BS EN ISO 8536-10 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR USE WITH PRESSURE INFUSION EQUIPMENT
DIN EN ISO 81060-1 E : 2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE (ISO 81060-1:2007)
11/30228364 DC : 0	BS EN ISO 10555-1 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS
CSA Z8836 : 2011 : FR	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
BS ISO 15674 : 2009	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS
DIN EN ISO 8836 : 2015	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014
CSA ISO 8637 : 2012	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
BS ISO 11040-4 : 2015	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
08/30179592 DC : DRAFT MAR 2008	BS ISO 15675 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS
BS ISO 81060-1 : 2007 COR 2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
06/30153337 DC : DRAFT JULY 2006	BS EN 15546-1 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
AAMI ISO 25539-1 : 2017	CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES
I.S. EN ISO 10555-1:2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017)
02/565247 DC : DRAFT DEC 2002	ISO 8637 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
I.S. EN ISO 3826-4:2015	PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHAERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES (ISO 3826-4:2015)
NF EN ISO 80601-2-12 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
02/564518 DC : DRAFT OCT 2002	BS EN ISO 8536-11 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 11: INFUSION FILTERS FOR USE WITH PRESSURE INFUSION EQUIPMENT
UNI EN ISO 8836 : 2015	A SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
CSA C22.2 No. 80601-2-72 : 2017	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
UNE EN ISO 8836 : 2015	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014)
BS EN ISO 8637 : 2014	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS (ISO 8637:2010, INCLUDING AMENDMENT 1 2013-04-01)
DIN EN ISO 11070 E : 2015	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014)
UNE EN 80369-5 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS
06/30137313 DC : 0	ISO/IEC 81060-1 - NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR MECHANICAL TYPE
BS ISO 14972 : 1998	STERILE OBTURATORS FOR SINGLE USE WITH OVER-NEEDLE PERIPHERAL INTRAVASCULAR CATHETERS
NF EN 80601-2-30 : 2011 AMD 1 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
CSA ISO 8637 : 2012	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
CSA ISO 8638 : 2012	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS
IEC 80601-2-30 REDLINE : 2ED 2018	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
DIN 13098-1 : 1992	SINGLE USE PLASTICS SYRINGES FOR MEDICAL PURPOSES - SINGLE USE PLASTICS SYRINGES FOR GENERAL USE - DIMENSIONS, REQUIREMENTS, TEST
CSA Z21647 : 2007	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
DIN EN ISO 22413 : 2013	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010)
CSA ISO 8637 : 2012 : INC : AMD 1 : 2015	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
CSA Z8836 : 2011 : R2015	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
CSA Z8836 : 2011	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
DIN EN ISO 81060-1 : 2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE (ISO 81060-1:2007)
CSA Z21647 : 2007 : R2012 : FR	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
CSA ISO 8638 : 2012 : R2017	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS
NBR IEC 80601-2-30 : 2014	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
BS EN ISO 10555-1 : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS
CSA ISO 8637 : 2012 : R2017	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
AAMI ID54 : 1996	ENTERAL FEEDING SET ADAPTERS AND CONNECTORS
CSA ISO 8637 : 2012 : INC : AMD 1 : 2015 : R2017	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
DIN EN ISO 80369-7 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
CSA Z21647 : 2007 : R2012	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
CSA ISO 8638 : 2012 : R2017	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS
UNE EN ISO 11070 : 2015	Sterile single-use intravascular introducers, dilators and guidewires (ISO 11070:2014)
PREN ISO 80369-1 : DRAFT 2009	SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 80601-2-30 : 2010	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
I.S. EN ISO 80369-7:2017 COR 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01)
CSA C22.2 No. 80601-2-30 : 2010 : INC : COR 1 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
CSA C22.2 No. 80601-2-30 : 2010FR	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
ISO 18241 : 2016	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOPULMONARY BYPASS SYSTEMS - VENOUS BUBBLE TRAPS
CSA C22.2 No. 80601-2-30 : 2010 : R2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
NF ISO 14972 : 1999	STERILE OBTURATORS FOR SINGLE USE WITH OVER-NEEDLE PERIPHERAL INTRAVASCULAR CATHETERS
DIN EN ISO 7199 : 2015	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) (ISO 7199:2016)
AAMI HE75 : 2009(R2013)	HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES
CSA C22.2 No. 60601.2.16 : 2014(R2019)	MEDICAL ELECTRICAL EQUIPMENT - PART 2-16: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HAEMODIALYSIS, HAEMODIAFILTRATION AND HAEMOFILTRATION EQUIPMENT
UNI EN ISO 8638 : 2014	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS
BS EN ISO 11070 : 2014	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES
I.S. EN ISO 81060-1:2012	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE (ISO 81060-1:2007)
CSA ISO 7199 : 0	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS)
CSA Z21647 : 2007	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
I.S. EN ISO 22413:2013	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010)
BS ISO 7199 : 2009	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS)
CEI EN 60601-2-16 : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 2-16: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HAEMODIALYSIS, HAEMODIAFILTRATION AND HAEMOFILTRATION EQUIPMENT
I.S. EN ISO 25539-1:2017	CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017)
I.S. EN ISO 1135-3:2017	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
AAMI HE75 :2009	HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES
I.S. EN 80601-2-30:2010	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
AAMI ISO 18241 : 2016	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOPULMONARY BYPASS SYSTEMS - VENOUS BUBBLE TRAPS
AAMI ISO 80369-7 : 2016	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS
I.S. EN ISO 8637:2014	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS (ISO 8637:2010, INCLUDING AMENDMENT 1 2013-04-01)
AAMI BP22 : 1994 : R2016	BLOOD PRESSURE TRANSDUCERS
AAMI BP22 : 1994 : R2011	BLOOD PRESSURE TRANSDUCERS
AAMI ISO 8638 : 2010	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HEMODIALYZERS, HEMODIAFILTERS AND HEMOFILTERS
AAMI IEC 60601-2-16 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-16: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEMODIALYSIS, HEMODIAFILTRATION AND HEMOFILTRATION EQUIPMENT
AAMI ID54 : 1996 : R2012	ENTERAL FEEDING SET ADAPTERS AND CONNECTORS
AAMI BP22 : 1994	BLOOD PRESSURE TRANSDUCERS
AAMI ISO 8836 : 2015	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
AAMI ISO 8638 : 2010 : R2015	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HEMODIALYZERS, HEMODIAFILTERS AND HEMOFILTERS
AAMI ISO 15674 : 2016	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS
BS EN ISO 80601-2-12 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO/IEC 80601-2-12:2011)
I.S. EN ISO 8835-3:2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
ISO 10555-1 : 2013(R2018)	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS
I.S. EN ISO 80601-2-72:2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
I.S. EN ISO 80601-2-12:2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
UNE EN ISO 1135-5 : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
ISO/DIS 80601-2-84 : 40.20 (2018)	MEDICAL ELECTRICAL EQUIPMENT - PART 2-84: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF EMERGENCY AND TRANSPORT VENTILATORS
BS 5081-1(1994) : 1994	STERILE HYPODERMIC SYRINGES AND NEEDLES - SPECIFICATION FOR STERILE, SINGLE-USE HYPODERMIC SYRINGES FOR MANUAL USE
EN ISO 10555-1 : 2013 AMD 1 2017	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017)
AAMI RD16 : 2007	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HEMODIALYZERS, HEMODIAFILTERS, HEMOFILTERS AND HEMOCONCENTRATORS
I.S. EN ISO 8638:2014	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS (ISO 8638:2010)
I.S. EN ISO 11070:2014	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014)
I.S. EN 60601-2-16:2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-16: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HAEMODIALYSIS, HAEMODIAFILTRATION AND HAEMOFILTRATION EQUIPMENT
ISO 11070 : 2014	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES
UNE EN ISO 1135-3 : 2017	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
I.S. EN ISO 7199:2017	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) (ISO 7199:2016)
I.S. EN ISO 80601-2-13:2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011)
NBR ISO 10555-1 : 2003	STERILE, SINGLE-USE INTRAVASCULAR CATHETER - PART 1: GENERAL REQUIREMENTS
CSA Z8835.2 : 2008	INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS FOR ADULTS
UNI EN ISO 8637 : 2014	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
DIN EN ISO 11070 : 2015	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014)
ISO 15675 : 2016	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS
ISO 28620 : 2010	MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES
ISO 8600-1 : 2015	ENDOSCOPES - MEDICAL ENDOSCOPES AND ENDOTHERAPY DEVICES - PART 1: GENERAL REQUIREMENTS
CSA Z8835.3 : 2008	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
13/30273308 DC : 0	BS EN ISO 3826-4 - PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHAERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES
08/30184486 DC : DRAFT JUNE 2008	BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE
DIN EN 80369-5 : 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS (IEC 80369-5:2016 + COR.1:2017)
I.S. EN 80369-5:2016	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS
CSA C22.2 No. 80601-2-12 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
UNI EN ISO 11070 : 2015	STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES
BS ISO 11040-6 : 2012	PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES
ISO 15674 : 2016	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS
ASTM D 7458 : 2014 : REDLINE	Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
ISO 11040-4 : 2015	PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
ISO 595-2 : 1987	REUSABLE ALL GLASS OR METAL AND GLASS SYRINGES FOR MEDICAL USE - PART 2: DESIGN, PERFORMANCE REQUIREMENTS AND TESTS
I.S. EN ISO 8836:2014	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014)
IEC 80369-5 : 2016 COR 1 2017	SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS
IEC 80601-2-30 : 2.0	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
ISO 8836 : 2014	SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
EN ISO 8536-4 : 2013 AMD 1 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010/AMD 1:2013)
BS EN ISO 80601.2.13:2012+A2:2019	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
EN ISO 80601-2-12 : 2011 COR 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
ISO 80601-2-12 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
I.S. EN ISO 8536-4:2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010)
BS EN ISO 8536-4 : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
DIN EN ISO 1135-4 : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015)
DIN EN 20594-1 : 1995	CONICAL FITTINGS WITH A 6 % (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 8835-2 : 2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS
DIN EN ISO 10555-4 : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS (ISO 10555-4:2013)
DIN EN ISO 8536-11 E : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 11: INFUSION FILTERS FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-11:2015)
DIN EN ISO 8536-10 E : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-10:2015)
DIN EN ISO 8536-8 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 8: INFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 8536-8:2015)
DIN EN ISO 8536-11 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 11: INFUSION FILTERS FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-11:2015)
DIN EN ISO 1135-4 E : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015)
DIN EN ISO 8536-4 E : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013)
DIN EN ISO 8536-4 : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013)
DIN EN ISO 8536-8 E : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 8: INFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 8536-8:2015)
DIN EN ISO 8536-10 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-10:2015)
DIN EN ISO 8536-9 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 9: FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-9:2015)
DIN EN ISO 8536-9 E : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 9: FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-9:2015)
DIN EN ISO 10555-4 E : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS (ISO 10555-4:2013)
BS EN ISO 7864 : 2016	STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS (ISO 7864:2016)
BS EN ISO 8536-9 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 9: FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT
ISO 81060-1 : 2007(R 2017)	NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
ISO 8637 : 2010	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
UNE EN ISO 8536-11 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 11: INFUSION FILTERS FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-11:2015)
UNE EN ISO 8536-9 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 9: FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-9:2015)
ISO 22413 : 2010	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS
ISO 25539-1 : 2017	CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES
BS EN ISO 8536-11 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 11: INFUSION FILTERS FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT
UNE EN ISO 1135-4 : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015)
BS EN ISO 7886-2 : 1997	STERILE HYPODERMIC SYRINGES FOR SINGLE USE - SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS
ISO 10555-4 : 2013(R2018)	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS
BS EN ISO 8536-10 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT
BS EN ISO 10555-4 : 2013	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS (ISO 10555-4:2013)
ISO 1135-5 : 2015	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS
ISO 8835-2 : 2007	INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS
ISO 8835-3 : 2007	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
UNI EN ISO 8536-4 : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
BS EN 60601-2-16 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-16: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HAEMODIALYSIS, HAEMODIAFILTRATION AND HAEMOFILTRATION EQUIPMENT
BS EN ISO 1135-4 : 2015	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED
ISO 7886-2 : 1996(R2006)	STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 2: SYRINGES FOR USE WITH POWER-DRIVEN PUMPS
UNE EN ISO 80601-2-13 : 2013	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011)
BS EN 20594-1 : 1994	CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - GENERAL REQUIREMENTS
UNE EN ISO 8536-4 : 2013	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010/AMD 1:2013)
BS EN ISO 8835-2 : 2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS
ISO 7199 : 2016	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS)
BS EN ISO 8536-8 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 8: INFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS
ISO 8638 : 2010	CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS
UNE EN ISO 10555-4 : 2014	INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 4: BALLOON DILATATION CATHETERS (ISO 10555-4:2013)
BS EN ISO 21647 : 2009	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
EN ISO 7199 : 2017	CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) (ISO 7199:2016)
ISO 3826-4 : 2015	PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHAERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES
ISO 8536-10 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT
ISO 1135-3 : 2016	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE
ISO 80601-2-72 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
ISO 1135-4 : 2015	TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED
UNE EN ISO 8536-10 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-10:2015)
UNE EN ISO 22413 : 2013	TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010)
ISO 7864 : 2016	STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS
ISO 8536-8 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 8: INFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS
ISO 8536-9 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 9: FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT
ISO 8536-4 : 2010	INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
ISO 80601-2-13 : 2011(R2017)	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
UNE EN ISO 11070 : 2015	Sterile single-use intravascular introducers, dilators and guidewires (ISO 11070:2014)
EN ISO 7886-2 : 1997	STERILE HYPODERMIC SYRINGES FOR SINGLE USE - SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS
ISO 8536-11 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 11: INFUSION FILTERS FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT
ISO 21647 : 2004	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
ISO 594-1 : 1986	CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS
UNE EN ISO 7864 : 2017	STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS (ISO 7864:2016)
UNI EN ISO 80601-2-13 : 2013	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
BS EN 30-1-2 : 2012	DOMESTIC COOKING APPLIANCES BURNING GAS - SAFETY - PART 1-2: APPLIANCES HAVING FORCED-CONVECTION OVENS AND/OR GRILLS
UNE EN ISO 8536-8 : 2015	INFUSION EQUIPMENT FOR MEDICAL USE - PART 8: INFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 8536-8:2015)
CSA C22.2 No. 80601-2-12 : 2012(R2017)	MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS

Standards Referencing This Book - (Show below) - (Hide below)

ISO 7886 : 1984	STERILE HYPODERMIC SYRINGES FOR SINGLE USE
ISO 468 : 1982	SURFACE ROUGHNESS - PARAMETERS, THEIR VALUES AND GENERAL RULES FOR SPECIFYING REQUIREMENTS
ISO 594-1 : 1986	CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS

Add To Cart

Product Format

Quantity

add to cart

ISO 594-2 : 1998

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?