• There are no items in your cart

ISO 6245:2001

Current
Current

The latest, up-to-date edition.

Petroleum products — Determination of ash
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

10-04-2001

This International Standard specifies a method for the determination of the ash content of petroleum products, such

as distillate and residual fuel oils, crude petroleum, lubricating oils, waxes and other petroleum products, in which

any ash-forming constituents present are normally considered to be undesirable impurities or contaminants. Ash

can result from oil-soluble or water-soluble metallic compounds or from extraneous solids such as dirt and rust.

The method is applicable to products having ash contents in the range 0,001 % (m/m) to 0,180 % (m/m), but does

not apply to products which contain ash-forming additives, including certain phosphorus compounds. The analysis

of unused or used lubricating oils containing additives, used engine crankcase oils, lubricating oils containing lead,

or certain non-hydrocarbon diesel fuels, should be determined using ISO 39871), which includes a step to produce

sulfated ash of higher melting point.

NOTE 1 For the purposes of this International Standard, the term "% (m/m)" is used to represent the mass fraction of a

material.

NOTE 2 With certain types of samples, the test results may not account quantitatively for all the metal compounds capable of

forming an ash. Some unused lubricating oils and distillate fuel oils contain metal inorganic additives of low molecular mass

(e.g. sodium, potassium), where the metal oxide may sublime below the temperatures specified in this International Standard.

Committee
ISO/TC 28
DocumentType
Standard
Pages
5
PublisherName
International Organization for Standardization
Status
Current
Supersedes

BS EN 16734 : 2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
14/30294041 DC : 0 BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS
PD CEN/TR 16557:2013 Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination
DIN EN 16900 E : 2017 FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
PD CEN/TR 16389:2017 Automotive fuels. Paraffinic diesel fuel and blends with FAME. Background to the parameters required and their respective limits and determination
BS EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods
13/30279896 DC : 0 BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
DIN ISO 15380:2004-05 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HETG, HEPG, HEES AND HEPR
PD CEN/TR 17103:2017 Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination
03/314396 DC : 0 ISO 20139 - RUBBER COMPOUNDING INGREDIENTS - PROCESS OILS - METHODS OF TEST AND CLASSIFICATION
ISO 4261:2013 Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications
S.R. CEN/TR 16557:2013 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL BLENDS (B11 - B30) - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
S.R. CEN/TS 15940:2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
EN 16709:2015/AC:2016 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
EN 16734:2016 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
BS EN 16709 : 2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
ASTM D 7044 : 2015 : REDLINE Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
BS MA 100:1989 Specification for petroleum fuels for marine oil engines and boilers
DEFSTAN 68-251/3(2007) : 2007 FUEL SOLUBLE LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS, NATO CODE: S-1747 JOINT SERVICE DESIGNATION: AL-61
BS ISO 3987:2010 Petroleum products. Determination of sulfated ash in lubricating oils and additives
S.R. CEN/TR 16389:2017 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL AND BLENDS WITH FAME - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
S.R. CWA 15940:2009 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
DEFSTAN 91-4/9(2013) : 2013 FUEL, NAVAL, DISTILLATE NATO CODE: F-76 JOINT SERVICE DESIGNATION DIESO F-76
12/30261072 DC : 0 BS ISO 4261 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF GAS TURBINE FUELS FOR INDUSTRIAL AND MARINE APPLICATIONS
08/30175752 DC : DRAFT JAN 2008 BS ISO 3987 - PETROLEUM PRODUCTS - DETERMINATION OF SULFATED ASH IN LUBRICATING OILS AND ADDITIVES
I.S. EN 16734:2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
I.S. EN 16900:2017 FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
16/30294369 DC : 0 BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS
14/30298209 DC : 0 BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
ISO 8217:2017 Petroleum products Fuels (class F) Specifications of marine fuels
I.S. EN 16709:2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
DIN EN 15940:2016-09 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
DIN EN 590:2017-10 Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017)
SAE MS 1005 : 2017 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION
BS EN 14156:2003 Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods
I.S. EN ISO 10370:2014 PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - MICRO METHOD (ISO 10370:2014)
I.S. EN ISO 8178-5:1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
BS 3863:1992 Guide for gas turbines procurement
BS ISO 8217:2017 Petroleum products. Fuels (class F). Specifications of marine fuels
17/30352956 DC : 0 BS ISO 8178-6 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 6: REPORT OF MEASURING RESULTS AND TEST
03/303313 DC : DRAFT APR 2003 EN 14639 - CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS
PREN 590 : DRAFT 2011 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
14/30310326 DC : 0 BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
I.S. CEN/TR 15160:2005 PETROLEUM AND RELATED PRODUCTS - APPLICABILITY OF DIESEL FUEL TEST METHODS FOR FATTY ACID METHYL ESTERS (FAME) - INFORMATION AND RESULTS ON ROUND ROBIN TESTS
UNE-EN 16734:2017 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
BS 2000-13(1994) : 1994 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - CONRADSON METHOD
I.S. EN 15940:2016 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
DIN EN 16709 E : 2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
S.R. CEN/TR 17103:2017 FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION
DIN EN 16900:2015-09 (Draft) FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
ISO 8178-5:2015 Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels
DIN EN 14639 E : 2005 CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS
EN 14156:2003 Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods
EN ISO 8178-5 : 1997 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS
DIN EN 15940 E : 2016 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
CEN/TR 15160:2005 Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests
PD CEN/TR 15160:2005 Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests
CEN/TR 16557:2013 Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination
BS ISO 8178-6:2000 Reciprocating internal combustion engines. Exhaust emission measurement Report of measuring results and test
BS ISO 2314:2009 Gas turbines. Acceptance tests
ISO 3987:2010 Petroleum products — Determination of sulfated ash in lubricating oils and additives
DIN ISO 8217:2013-12 PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS (ISO 8217:2012)
EN 590:2013 Automotive fuels - Diesel - Requirements and test methods
BS ISO 8178-5:2008 Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
UNE-EN ISO 10370:2015 Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014)
BS EN 14639:2005 Crude tar and crude benzole. Characteristics and test methods
BS EN 14155:2003 Derivatives from coal pyrolysis. Carbon black feedstock. Specifications and test methods
ISO 10370:2014 Petroleum products — Determination of carbon residue — Micro method
BS EN ISO 8178-5:1997 Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
EN ISO 10370:2014 Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014)
EN 14155:2003 Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods
EN 14639:2005 Crude tar and crude benzole - Characteristics and test methods
EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
12/30238190 DC : 0 BS EN ISO 10370 - PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - MICRO METHOD
11/30249539 DC : 0 BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
BS ISO/TR 13739:1998 Petroleum products. Methods of specifying practical procedures for the transfer of bunker fuels to ships
UNI CEN/TS 15940 : 2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
15/30310648 DC : 0 BS ISO 15380 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HETG, HEPG, HEES AND HEPR
BS 2000-398(2014) : 2014 PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - MICRO METHOD (ISO 10370:2014)
15/30325842 DC : 0 BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
01/124221 DC : DRAFT NOV 2001 BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS
DIN 51515-2:2010-02 Lubricants and governor fluids for turbines - Minimum requirements - Part 2: Turbine oils TG for high temperature service
BS ISO 4261:2013 Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications
09/30206973 DC : 0 BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS
DIN 51515-1:2010-02 Lubricants and governor fluids for turbines - Minimum requirements - Part 1: Turbine oils TD for normal service
BS ISO 15380:2016 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
BS 2000-398(1996) : 1996 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - MICRO METHOD
SAE MS 1000 : 2013 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION
BS 2000-163(2010) : 2010 PETROLEUM PRODUCTS - DETERMINATION OF SULFATED ASH IN LUBRICATING OILS AND ADDITIVES
ISO 2314:2009 Gas turbines — Acceptance tests
I.S. EN 590:2013+A1:2017&LC:2017 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
DIN EN 16709:2015-12 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
BS EN 590 : 2013 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
ISO 15380:2016 Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
UNE-EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
UNE-EN 16709:2016 Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
ISO 8178-6:2000 Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test
DIN EN ISO 10370:2015-03 PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - MICRO METHOD (ISO 10370:2014)
BS EN ISO 10370:2014 Petroleum products. Determination of carbon residue. Micro method
UNE-EN 590:2014 Automotive fuels - Diesel - Requirements and test methods
CEN/TR 17103:2017 Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination
CEN/TR 16389:2017 Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination
CEN/TS 15940 : 2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
DIN EN 14639:2005-11 Crude tar and crude benzole - Characteristics and test methods; German version EN 14639:2005

ISO 3171:1988 Petroleum liquids — Automatic pipeline sampling
ISO 3170:2004 Petroleum liquids — Manual sampling
ISO 5272:1979 Toluene for industrial use — Specifications
ISO 4259:2006 Petroleum products Determination and application of precision data in relation to methods of test
EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004)
EN ISO 3171:1999 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
EN ISO 4259:2006 Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006)

View more information
US$49.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.