• There are no items in your cart

ISO 6336-1:2006

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

11-29-2019

Published date

09-04-2006

ISO 6336-1:2006 presents the basic principles of, an introduction to, and the general influence factors for, the calculation of the load capacity of spur and helical gears. Together with ISO 6336-2, ISO 6336-3, ISO 6336-5 and ISO 6336-6, it provides a method by which different gear designs can be compared. It is not intended to assure the performance of assembled drive gear systems. It is not intended for use by the general engineering public. Instead, it is intended for use by the experienced gear designer who is capable of selecting reasonable values for the factors in these formulae based on knowledge of similar designs and awareness of the effects of the items discussed.

The formulae in ISO 6336 are intended to establish a uniformly acceptable method for calculating the pitting resistance and bending strength capacity of cylindrical gears with straight or helical involute teeth.

DevelopmentNote
Supersedes ISO/DIS 6336-1 (09/2006)
DocumentType
Standard
Pages
111
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

Standards Relationship
NEN ISO 6336-1 : 2008 Identical
BS ISO 6336-1:2006 Identical
NF ISO 6336-1 : 2006 Identical

04/19993045 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) Integral temperature method
BS EN 81-43:2009 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Lifts for cranes
11/30215034 DC : DRAFT MAR 2011 BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
04/102158 DC : 0 BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES
15/30269176 DC : 0 BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS
BS ISO 6336-6:2006 Calculation of load capacity of spur and helical gears Calculation of service life under variable load
BS ISO TR 10495:1997 Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336
DIN EN 81-43:2010-05 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
04/30126840 DC : DRAFT DEC 2004 BS ISO 6336-6 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD
BS ISO 6336-3:2006 Calculation of load capacity of spur and helical gears Calculation of tooth bending strength
CSA B354.5 : 2007 : R2016 MAST-CLIMBING WORK PLATFORMS
BS ISO 9084:2000 Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements
ISO/TS 6336-20:2017 Calculation of load capacity of spur and helical gears Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) Flash temperature method
BS ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Integral temperature method
UNE-EN 14985:2012 Cranes - Slewing jib cranes
AGMA ISO 6336-6 : A2008(R2014) CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD
B354.12-17 Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs)
DIN EN 14985 E : 2012 CRANES - SLEWING JIB CRANES
DIN EN 12158-1:2011-06 Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010)
DIN EN 1495:2009-12 Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009)
UNE-EN 12159:2013 Builders hoists for persons and materials with vertically guided cages
11/30235014 DC : 0 BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS EN 12159:2012 Builders hoists for persons and materials with vertically guided cages
I.S. EN 14985:2012 CRANES - SLEWING JIB CRANES
UNI EN 12158-1 : 2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
DIN EN 14492-2:2010-05 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
NF EN 12158-1 : 2000 + A1 2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
AGMA 938 : A SHOT PEENING OF GEARS
ISO 6336-6:2006 Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load
BS ISO 9083:2001 Calculation of load capacity of spur and helical gears. Application to marine gears
03/314803 DC : DRAFT SEP 2003 ISO 6336-2 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING)
99/702257 DC : DRAFT JAN 1999 PREN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS AND SERVICE LIFTS - PART 7: RACK AND PINION LIFTS
BS ISO 10972-1:1998 Cranes. Requirements for mechanisms General
PD ISO/TR 15144-2:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears Examples of calculation for micropitting
03/301396 DC : 0 EN 14607-3 - SPACE ENGINEERING - MECHANICAL - PART 3: MECHANISMS
ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements
NF ISO/TR 10495 : 98 FD CYLINDRICAL GEARS - CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD - CONDITIONS FOR CYLINDRICAL GEARS IN ACCORDANCE WITH ISO 6336
BS EN 13135 : 2013 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
EN 13135:2013+A1:2018 Cranes - Safety - Design - Requirements for equipment
ISO/TR 10495:1997 Cylindrical gears Calculation of service life under variable loads Conditions for cylindrical gears according to ISO 6336
I.S. EN 13135:2013 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
B354.9-17 Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs)
UNI EN 81-43 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 12159:2013-03 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
DIN EN 15011:2014-09 Cranes - Bridge and gantry cranes (includes Amendment A1:2014)
ISO 19859:2016 Gas turbine applications Requirements for power generation
BS EN 15095 : 2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
I.S. EN 12158-1:2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
I.S. EN 12158-2:2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
I.S. EN 15095:2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
EN 15011:2011+A1:2014 Cranes - Bridge and gantry cranes
I.S. EN 12159:2012 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
I.S. EN 1495:1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
07/30161753 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
I.S. EN 61400-4:2013 WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV))
04/30122476 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
02/710617 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
14/30295634 DC : 0 BS EN 16719 - TRANSPORT PLATFORMS
11/30229148 DC : 0 BS ISO 10300-1 - CALCULATION OF LOAD CAPACITY OF BEVEL GEARS - PART 1: INTRODUCTION AND GENERAL INFLUENCE FACTORS
BS ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
BS ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Flash temperature method
ISO 9083:2001 Calculation of load capacity of spur and helical gears — Application to marine gears
AGMA 6123 : REV A : 1988 DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
ISO 16369:2007 Elevating work platforms Mast-climbing work platforms
ISO 6336-3:2006 Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength
BS ISO 10300-1:2014 Calculation of load capacity of bevel gears Introduction and general influence factors
ISO 6336-2:2006 Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting)
ISO/TR 15144-2:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears Part 2: Examples of calculation for micropitting
I.S. EN 16719:2018 TRANSPORT PLATFORMS
ONORM EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES
UNE-EN 13135:2013 Cranes - Safety - Design - Requirements for equipment
ISO 9084:2000 Calculation of load capacity of spur and helical gears Application to high speed gears and gears of similar requirements
ISO 10300-1:2014 Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors
ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
DIN EN 12158-2:2011-04 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010)
DIN EN 15095 E : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
BS EN 1495 : 1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
UNI EN 1495 : 2009 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
UNI EN 15095 : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
UNI EN 12159 : 2013 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
UNI EN 14985 : 2012 CRANES - SLEWING JIB CRANES
EN 1495:1997+A2:2009/AC:2010 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
UNI EN 12158-2 : 2010 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
BS ISO 9085:2002 Calculation of load capacity of spur and helical gears. Application for industrial gears
BS ISO 6336-2:2006 Calculation of load capacity of spur and helical gears Calculation of surface durability (pitting)
09/30183113 DC : 0 BS EN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 7: RACK AND PINION LIFTS
08/30181434 DC : DRAFT DEC 2008 BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
AGMA 6123 : REV A : 2006 DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
03/314804 DC : DRAFT SEP 2003 BS ISO 6336-3 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH
04/30126179 DC : DRAFT DEC 2004 EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
I.S. EN 81-43:2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011 MAST-CLIMBING WORK PLATFORMS
AGMA 6123 : REV A : 1988 : R2000 DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
ISO 81400-4:2005 Wind turbines Part 4: Design and specification of gearboxes
DIN EN 13135:2013-05 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 2: Integral temperature method
I.S. EN 15011:2011 CRANES - BRIDGE AND GANTRY CRANES
DIN EN 14985:2012-05 Cranes - Slewing jib cranes
BS EN ISO 13691:2002 Petroleum and natural gas industries. High-speed special-purpose gear units
ISO 9085:2002 Calculation of load capacity of spur and helical gears — Application for industrial gears
BS EN 12158-2 : 2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
17/30357380 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
BS EN 14985:2012 Cranes. Slewing jib cranes
UNE-EN 61400-4:2013 Wind turbines - Part 4: Design requirements for wind turbine gearboxes
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
BS EN 15011 : 2011 CRANES - BRIDGE AND GANTRY CRANES
UNE-EN 12158-1:2001 Builders hoists for goods. Part 1: Hoists with accessible platforms.
10/30218104 DC : 0 BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
UNE-EN 12158-2:2001 Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices.
DIN EN 15095:2009-06 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
EN 12158-1:2000+A1:2010 Builders' hoists for goods - Part 1: Hoists with accessible platforms
EN 81-43:2009 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
EN 14985:2012 Cranes - Slewing jib cranes
EN 12159:2012 Builders hoists for persons and materials with vertically guided cages
EN ISO 13691:2002 Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001)
EN 14492-2:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 12158-2:2000+A1:2010 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices
EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
ISO/TR 13593:1999 Enclosed gear drives for industrial applications
PD ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Integral temperature method
BS EN 61400-4:2013 Wind turbines Design requirements for wind turbine gea
DIN 3990-1:1987-12 CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS - INTRODUCTION AND GENERAL INFLUENCE FACTORS
PD ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears Introduction and basic principles
11/30210938 DC : 0 BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES
BS ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Strength and quality of materials
BS ISO 81400-4:2005 Wind turbines Design and specification of gearboxes
CSA B354.5:2007 MAST-CLIMBING WORK PLATFORMS
ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 1: Flash temperature method
EN 16719:2018 Transport platforms
ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears Part 1: Introduction and basic principles
DIN EN 14492-2:2016-08 (Draft) CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
BS ISO 13691 : 2001 AMD 14307 PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS
BS EN 12158-1 : 2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
BS EN 14492-2 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 61400-4:2013 Wind turbines - Part 4: Design requirements for wind turbine gearboxes
UNI EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES
UNE-EN 15011:2011 Cranes - Bridge and gantry cranes

ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
ISO 6336-2:2006 Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting)
ISO 701:1998 International gear notation Symbols for geometrical data
ISO 1328-1:2013 Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
ISO 6336-3:2006 Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength
ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
ISO 53:1998 Cylindrical gears for general and heavy engineering Standard basic rack tooth profile
ISO 6336-6:2006 Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load
ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules
ISO/TR 10064-1:2017 Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks
AGMA 2001 : D FUNDAMENTAL RATING FACTORS AND CALCULATION METHODS FOR INVOLUTE SPUR AND HELICAL GEAR TEETH

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.