ISO 679:2009
Current
Current
The latest, up-to-date edition.
Cement Test methods Determination of strength
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
04-24-2009
ISO 679:2009 specifies a method of determining the compressive and, optionally, the flexural strength of cement mortar containing one part by mass of cement, three parts by mass of ISO standard sand and one half part of water. ISO 679:2009 applies to common cements and to other cements and materials, the standards for which call up this method. ISO 679:2009 might not apply to other cement types that have, for example, a very short initial setting time.
ISO 679:2009 describes the reference equipment and procedure and specifies the method used for validation testing of ISO standard sands and of alternative equipment and procedures.
| DevelopmentNote |
Supersedes ISO/R 679. (01/2002) Supersedes ISO/DIS 679. (04/2009)
|
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SAC GB/T 17671 : 1999 | Identical |
| 11/30219351 DC : 0 | BS EN 60312-3 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 3: CLEANING ROBOTS FOR HOUSEHOLD USE - DRY CLEANING - METHODS OF MEASURING PERFORMANCE |
| ISO 9597:2008 | Cement — Test methods — Determination of setting time and soundness |
| 10/30215108 DC : 0 | BS EN 60312-2 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 2: WET VACUUM CLEANERS - METHODS OF MEASURING THE PERFORMANCE |
| BS EN 62929:2014 | Cleaning robots for household use. Dry cleaning: Methods of measuring performance |
| BS EN 60312:2008 | Vacuum cleaners for household use. Methods of measuring the performance |
| DD IEC/PAS 62611:2009 | Vacuum cleaners for commercial use. Methods for measuring performance |
| 14/30296676 DC : 0 | BS EN 60312-2 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 2: WET CARPET CLEANING APPLIANCES - METHODS FOR MEASURING THE PERFORMANCE |
| BS 3999-12:1982 | Methods of measuring the performance of household electrical appliances Vacuum cleaners |
| I.S. EN ISO 28927-10:2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS |
| I.S. EN 62929:2014 | CLEANING ROBOTS FOR HOUSEHOLD USE - DRY CLEANING: METHODS OF MEASURING PERFORMANCE |
| UNE-EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| EN ISO 8662-6 : 1995 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 6: IMPACT DRILLS |
| ISO 14448:2016 | Low modulus adhesives for exterior tile finishing |
| 10/30217482 DC : 0 | BS ISO 28842 - GUIDELINES FOR SIMPLIFIED DESIGN OF SMALL REINFORCED CONCRETE BRIDGES |
| 14/30280554 DC : 0 | BS ISO 14448 - LOW MODULUS ADHESIVES FOR EXTERIOR TILE FINISHING |
| 08/30181058 DC : DRAFT APR 2008 | BS EN ISO 28927-5 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| 09/30205415 DC : 0 | BS EN 60312-1 ED 1.0 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1: DRY VACUUM - METHODS FOR MEASURING PERFORMANCE |
| BS ISO 14448:2016 | Low modulus adhesives for exterior tile finishing |
| CEI EN 60312 : 2008 | VACUUM CLEANERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
| EN 62929:2014 | Cleaning robots for household use - Dry cleaning: Methods of measuring performance |
| BS EN ISO 28927-5 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| I.S. EN 28662-3:1994 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 3: ROCK DRILLS AND ROTARY HAMMERS |
| 03/314635 DC : DRAFT SEP 2003 | ISO 15673 - GUIDELINES FOR THE SIMPLIFIED DESIGN OF STRUCTURAL REINFORCED CONCRETE FOR BUILDINGS |
| ISO 1920-4:2005 | Testing of concrete Part 4: Strength of hardened concrete |
| UNE-EN ISO 28927-5:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) |
| BS EN ISO 28927-10:2011 | Hand-held portable power tools. Test methods for evaluation of vibration emission Percussive drills, hammers and breakers |
| 16/30349000 DC : 0 | BS IEC 62885-4 ED 1.0 - SURFACE CLEANING APPLIANCES - PART 4: CORDLESS DRY VACUUM CLEANERS FOR HOUSEHOLD OR SIMILAR USE - METHODS FOR MEASURING THE PERFORMANCE |
| 10/30217479 DC : 0 | BS ISO 28841 - GUIDELINES FOR SIMPLIFIED SEISMIC ASSESSMENT AND REHABILITATION OF CONCRETE BUILDINGS |
| I.S. EN 60312-1:2017 | VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1: DRY VACUUM CLEANERS - METHODS FOR MEASURING THE PERFORMANCE |
| 17/30326545 DC : 0 | BS ISO 19097-1 - ACCELERATED LIFE TEST METHOD OF MIXED METAL OXIDE ANODES FOR CATHODIC PROTECTION - PART 1: APPLICATION IN CONCRETE |
| 13/30256250 DC : 0 | BS EN 60312-1-1 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1-1: CORDLESS DRY VACUUM CLEANERS - METHODS FOR MEASURING THE PERFORMANCE |
| IEC 60312-1:2010+AMD1:2011 CSV | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| BS ISO 14824-3:2012 | Grout for prestressing tendons Test methods |
| ISO 15673:2016 | Guidelines for the simplified design of structural reinforced concrete for buildings |
| UNE-EN 62885-3:2015 | Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods for measuring the performance |
| UNE-EN 62929:2014 | Cleaning robots for household use - Dry cleaning: Methods of measuring performance |
| IEC 60312-2:2010 | Vacuum cleaners for household use - Part 2: Wet cleaning appliances - Methods of measuring the performance |
| ISO 19097-1:2018 | Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 1: Application in concrete |
| NF EN ISO 28927-5 : 2010 AMD 1 2015 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| DIN EN ISO 28927-10:2011-07 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
| BS EN 60312-1:2017 | Vacuum cleaners for household use Dry vacuum cleaners. Methods for measuring the performance |
| I.S. EN ISO 8662-6:1996 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 6: IMPACT DRILLS |
| 16/30281518 DC : 0 | BS ISO 18407 - GUIDELINES FOR THE SIMPLIFIED DESIGN OF PRESTRESSED CONCRETE TANKS FOR POTABLE WATER |
| DIN EN ISO 28927-5:2015-12 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009 + AMD 1:2015) |
| UNI EN ISO 28927-10 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS |
| ISO 14824-3:2012 | Grout for prestressing tendons — Part 3: Test methods |
| IEC PAS 62611:2009 | Vacuum cleaners for commercial use - Methods for measuring performance |
| IEC 60312:2007 | Vacuum cleaners for household use - Methods of measuring the performance |
| ISO 8662-6:1994 | Hand-held portable power tools Measurement of vibrations at the handle Part 6: Impact drills |
| ISO 28927-5:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 5: Drills and impact drills |
| ISO 28927-10:2011 | Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percussive drills, hammers and breakers |
| EN 28662-3:1994/A2:2001 | HAND HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - ROCK DRILLS AND ROTARY HAMMERS |
| UNE-EN ISO 28927-10:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
| ISO 29582-2:2009 | Methods of testing cement Determination of the heat of hydration Part 2: Semi-adiabatic method |
| 11/30230632 DC : 0 | BS ISO 14824-3 - GROUT FOR PRESTRESSING TENDONS - PART 3: TEST METHODS |
| 18/30331860 DC | BS ISO 18408. Concrete. Reinforced concrete and pre-stressed concrete. Simplified structural design guidelines for reinforced concrete wall buildings |
| BS EN 62885-3:2015 | Surface cleaning appliances Wet carpet cleaning appliances. Methods for measuring the performance |
| I.S. EN ISO 28927-5:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009) |
| I.S. EN 62885-3:2015 | SURFACE CLEANING APPLIANCES - PART 3: WET CARPET CLEANING APPLIANCES - METHODS FOR MEASURING THE PERFORMANCE |
| EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| ISO 28842:2013 | Guidelines for simplified design of reinforced concrete bridges |
| I.S. EN 60312:2008 | VACUUM CLEANERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
| BS EN 28662-3:1995 | Hand-held portable power tools. Measurement of vibrations at the handle Rock drills and rotary hammers |
| BS EN ISO 8662-6:1995 | Hand-held portable power tools. Measurement of vibrations at the handle Impact drills |
| EN 62885-3:2015 | Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods for measuring the performance |
| EN 60312:2008 | Vacuum cleaners for household use - Methods of measuring the performance |
| EN ISO 28927-5:2009/A1:2015 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009/AMD 1:2015) |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| AS 14448:2020 | Low modulus adhesives for exterior tile finishing (ISO 14448:2016, MOD) |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
US$175.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.