ISO 691:2005
Current
Current
The latest, up-to-date edition.
Assembly tools for screws and nuts Wrench and socket openings Tolerances for general use
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
11-08-2005
ISO 691:2005 specifies tolerances on wrench and socket openings for screws and nuts (or similar parts) having metric width across flats dimensions. It gives, for each dimension, the tolerances for general use, defined by its two deviations, minimum and maximum, with respect to the nominal value. These deviations have been determined in relation to the width across flats tolerances for screws and nuts specified in ISO 4759-1 and with regard to the manufacture of tightening tools.
| DevelopmentNote |
Supersedes ISO/DIS 691 (11/2005)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE 16502:2008 | Identical |
| UNI ISO 691 : 2008 | Identical |
| NF ISO 691 : 2006 | Identical |
| DIN ISO 691:2007-04 | Identical |
| BS 192:1982 | Similar to |
| BS 192-1:1996 | Similar to |
| NFE 74 300 : 1984 | Similar to |
| UNI 5951 : 1987 | Similar to |
| DIN 475-2:1982-11 | Corresponds |
| 13/30290650 DC : 0 | BS ISO 2725-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SQUARE DRIVE SOCKETS - PART 2: MACHINE-OPERATED SOCKETS ('IMPACT') |
| 07/30175139 DC : DRAFT DEC 2007 | BS ISO 3318 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DOUBLE-HEADED OPEN-ENDED WRENCHES, DOUBLE-HEADED BOX WRENCHES AND COMBINATION WRENCHES - MAXIMUM WIDTHS OF HEADS |
| BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| BS EN 3710:2008 | Aerospace series. Sockets, bi-hexagonal. Technical specification |
| BS EN 3711:2008 | Aerospace series. Wrench-double ended, bi-hexagonal. Straight, cranked, offset |
| 17/30352158 DC : 0 | BS ISO 10103 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DOUBLED-HEADED BOX WRENCHES, FLAT AND OFFSET - OUTSIDE DIMENSIONS AND TEST TORQUES |
| 15/30322300 DC : 0 | BS ISO 4229 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SINGLE-HEAD ENGINEER'S WRENCHES FOR LOWER TORQUE APPLICATIONS - MAXIMUM OUTSIDE DIMENSIONS OF HEADS AND TEST TORQUES |
| BS 2A 302:2000 | Nuts, self-locking, with maximum operating temperatures less than or equal to 425°C. Procurement specification |
| 05/30136416 DC : DRAFT JULY 2005 | ISO 8641 - AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - PROCUREMENT SPECIFICATION |
| I.S. EN ISO 28927-2:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUT RUNNERS AND SCREWDRIVERS (ISO 28927-2:2009) |
| PREN 3711 : 200P1 | AEROSPACE SERIES - WRENCH-DOUBLE ENDED, BI-HEXAGONAL STRAIGHT, CRANKED, OFFSET |
| ISO 8642:2008 | Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Test methods |
| BS EN ISO 8662-7:1997 | Hand-held portable power tools. Measurement of vibrations at the handle Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action |
| DIN EN 14800:2007-06 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| ASME B107.17M : 1997 | GAGES, WRENCH OPENINGS, REFERENCE |
| BS ISO 8641:2008 | Aerospace. Self-locking nuts with maximum operating temperature greater than 425 °C. Procurement specification |
| NF EN 3711 : 2008 | AEROSPACE SERIES - WRENCH-DOUBLE ENDED, BI-HEXAGONAL - STRAIGHT, CRANKED, OFFSET |
| BS ISO 11168:1995 | Socket wrenches for spark and glow plugs |
| ISO 10104:2018 | Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset — Outside dimensions |
| I.S. EN ISO 8662-7:1998 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 7: WRENCHES, SCREWDRIVERS AND NUT RUNNERS WITH IMPACT, IMPULSE OR RATCHET ACTION |
| NF EN ISO 28927-2 : 2010 AMD 1 2017 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUTRUNNERS AND SCREWDRIVERS |
| BS ISO 10103:2001 | Assembly tools for screws and nuts. Double-headed, flat and offset, box wrenches. Length of wrenches and thickness of the heads |
| BS A 343:1999 | Nuts, plain or slotted (castellated). Test methods |
| 17/30352155 DC : 0 | BS ISO 10102 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DOUBLE-HEADED OPEN-ENDED ENGINEERS' WRENCHES - OUTSIDE DIMENSIONS |
| BS A 302:1992 | Self-locking nuts with maximum operating temperature less than or equal to 425°C. Procurement specification |
| NF EN 3710 : 2008 | AEROSPACE SERIES - SOCKETS, BI-HEXAGONAL - TECHNICAL SPECIFICATION |
| ISO 10102:2018 | Assembly tools for screws and nuts — Double-headed open-ended engineers' wrenches — Outside dimensions |
| BS EN ISO 28927-2 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUTRUNNERS AND SCREWDRIVERS |
| ISO 4229:2017 | Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques |
| I.S. EN 3710:2008 | AEROSPACE SERIES - SOCKETS, BI-HEXAGONAL - TECHNICAL SPECIFICATION |
| BS ISO 10102:2018 | Assembly tools for screws and nuts. Double-headed open-ended engineers\' wrenches. Outside dimensions |
| ISO 7738:2015 | Assembly tools for screws and nuts Combination wrenches Lengths of wrenches and maximum thickness of heads |
| I.S. EN 3711:2008 | AEROSPACE SERIES - WRENCH-DOUBLE ENDED, BI-HEXAGONAL - STRAIGHT, CRANKED, OFFSET |
| ISO 10103:2018 | Assembly tools for screws and nuts — Doubled-headed box wrenches, flat and offset — Outside dimensions and test torques |
| BS ISO 1085:2016 | Assembly tools for screws and nuts. Double-ended wrenches. Size pairing |
| 17/30332747 DC : 0 | BS ISO 1703 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - NOMENCLATURE |
| BS ISO 2725-2:2017 | Assembly tools for screws and nuts. Square drive sockets Machine-operated sockets (\'impact\') |
| BS ISO 2725-3:2017 | Assembly tools for screws and nuts. Square drive sockets Machine-operated sockets (\'non-impact\') |
| DIN 898:2008-05 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - DESIGNATION AND NOMENCLATURE |
| UNI 6743 : 2000 | HAND OPERATED TOOLS - TEE SOCKET WRENCHES WITH SWIVEL END |
| XP PREN 3711 : 1991 XP | AEROSPACE SERIES - WRENCH-DOUBLE ENDED, BI-HEXAGONAL STRAIGHT, CRANKED, OFFSET |
| BS ISO 2725-1:2017 | Assembly tools for screws and nuts. Square drive sockets Hand-operated sockets |
| 02/707775 DC : 0 | BS 3555-1 - RING WRENCHES - PART 1: UNIFIED SIZES |
| 13/30268911 DC : 0 | BS ISO 7738 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - COMBINATION WRENCHES - LENGTHS OF WRENCHES AND MAXIMUM THICKNESS OF HEADS |
| 16/30327548 DC : DRAFT APR 2016 | BS ISO 2725-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SQUARE DRIVE SOCKETS - PART 2: MACHINE-OPERATED SOCKETS ('IMPACT') |
| ISO 1703:2018 | Assembly tools for screws and nuts — Nomenclature |
| ISO 9140:1998 | Aerospace Nuts, plain or slotted (castellated) Test methods |
| DIN EN 14800 E : 2007 | CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS |
| UNI EN 15069 : 2009 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| UNI EN 14800 : 2007 | CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION DOMESTIC APPLIANCES USING GASEOUS FUELS |
| DIN 475-2:1982-11 | OPENINGS OF SPANNERS AND SOCKETS |
| BS 192-1:1996 | Open-ended wrenches Metric and unified |
| UNI ISO 4229 : 2011 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - SINGLE-HEAD ENGINEER'S WRENCHES FOR LOWER TORQUE APPLICATIONS - MAXIMUM OUTSIDE DIMENSIONS OF HEADS AND TEST TORQUES |
| 14/30293853 DC : 0 | BS ISO 2725-3 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SQUARE DRIVE SOCKETS - PART 3: MACHINE-OPERATED SOCKETS (NON-IMPACT) - DIMENSIONS |
| 02/707778 DC : 0 | BS 4006-2 - HAND OPERATED SQUARE DRIVE SOCKET WRENCHES - PART 2: BS/WHITWORTH AND BA SIZES |
| 17/30352161 DC : 0 | BS ISO 10104 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DOUBLE-HEADED BOX WRENCHES, DEEP OFFSET AND MODIFIED OFFSET - OUTSIDE DIMENSIONS |
| 02/707776 DC : DRAFT DEC 2002 | BS 3555-2 - RING WRENCHES - PART 2: BS/WHITWORTH SIZES |
| BS ISO 4229:2017 | Assembly tools for screws and nuts. Single-head engineer\'s wrenches for lower torque applications. Maximum outside dimensions of heads and test torques |
| ISO 2725-3:2017 | Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets ("non-impact") |
| 14/30290647 DC : 0 | BS ISO 2725-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SQUARE DRIVE SOCKETS - PART 1: HAND-OPERATED SOCKETS |
| XP PREN 3710 : 1991 XP | AEROSPACE SERIES - SOCKETS, BI-HEXAGONAL - TECHNICAL SPECIFICATION |
| BS 7586:1992 | Specification for combination wrenches |
| 08/30169607 DC : DRAFT APR 2008 | BS EN ISO 28927-2 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUT RUNNERS AND SCREWDRIVERS |
| 05/30136401 DC : DRAFT JULY 2005 | ISO 8642 - AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - TEST METHODS |
| 02/707773 DC : 0 | BS 7586-1 - COMBINATION WRENCHES - PART 1: UNIFIED SIZES |
| ISO 3318:2016 | Assembly tools for screws and nuts — Open-ended wrenches, box wrenches and combination wrenches — Maximum widths of heads |
| ISO 1085:2016 | Assembly tools for screws and nuts — Double-ended wrenches — Size pairing |
| ISO 11168:1995 | Socket wrenches for spark- and glow-plugs |
| ISO 2725-1:2017 | Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets |
| ISO 2725-2:2017 | Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ("impact") |
| DIN EN 15069 E : 2010 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| ISO 8662-7:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action |
| DIN EN 15069:2010-07 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| ISO 28927-2:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 2: Wrenches, nutrunners and screwdrivers |
| BS EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| EN 3710 : 2008 | AEROSPACE SERIES - SOCKETS, BI-HEXAGONAL - TECHNICAL SPECIFICATION |
| EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| EN 3711 : 2008 | AEROSPACE SERIES - WRENCH-DOUBLE ENDED, BI-HEXAGONAL - STRAIGHT, CRANKED, OFFSET |
| EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| EN ISO 28927-2:2009/A1:2017 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017) |
| EN ISO 8662-7 : 1997 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 7: WRENCHES, SCREWDRIVERS AND NUT RUNNERS WITH IMPACT, IMPULSE OR RATCHET ACTION |
| BS ISO 8642:2008 | Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods |
| BS A 295:1985 | Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C |
| 16/30327545 DC : DRAFT APR 2016 | BS ISO 2725-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SQUARE DRIVE SOCKETS - PART 1: HAND-OPERATED SOCKETS |
| 08/30177006 DC : DRAFT JAN 2008 | BS ISO 4229 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SINGLE-HEAD ENGINEER'S WRENCHES FOR LOWER TORQUE APPLICATIONS - MAXIMUM OUTSIDE DIMENSIONS OF HEADS AND TEST TORQUES |
| 16/30327551 DC : DRAFT APR 2016 | BS ISO 2725-3 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - SQUARE DRIVE SOCKETS - PART 3: MACHINE-OPERATED SOCKETS ('NON-IMPACT') |
| BS ISO 7738:2015 | Assembly tools for screws and nuts. Combination wrenches. Lengths of wrenches and maximum thickness of heads |
| BS ISO 3318:2016 | Assembly tools for screws and nuts. Open-ended wrenches, box wrenches and combination wrenches. Maximum widths of heads |
| 15/30322303 DC : 0 | BS ISO 3318 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DOUBLE-HEADED OPEN-ENDED WRENCHES, DOUBLE-HEADED BOX WRENCHES AND COMBINATION WRENCHES - MAXIMUM WIDTHS OF HEADS |
| 02/707774 DC : 0 | BS 7586-2 - COMBINATION WRENCHES - PART 2: BS/WHITWORTH SIZES |
| 02/707777 DC : 0 | BS 4006-1 - HAND OPERATED SQUARE DRIVE SOCKET WRENCHES - PART 1: UNIFIED SIZES |
| BIS IS 15471 : 2012 | AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - PROCUREMENT SPECIFICATION |
| BS 2A 295:2000 | Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods |
| PREN 3710 : 200P1 | AEROSPACE SERIES - SOCKETS, BI-HEXAGONAL - TECHNICAL SPECIFICATION |
| ISO 7481:2000 | Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Test methods |
| ISO 8641:2008 | Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Procurement specification |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 1703:2005 | Assembly tools for screws and nuts Designation and nomenclature |
US$49.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.