ISO 7619-1:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
09-26-2018
Language(s)
French, English, Russian
Published date
09-23-2010
ISO 7619-1:2010 specifies a method for determining the indentation hardness (Shore hardness) of vulcanized or thermoplastic rubber by means of durometers using the A scale for rubbers in the normal-hardness range; the D scale for rubbers in the high-hardness range; the AO scale for rubbers in the low-hardness range and for cellular rubbers; and the AM scale for thin rubber test pieces in the normal-hardness range.
| DevelopmentNote |
Togther with ISO 7619-2, it supersedes ISO 7619. (06/2004) DRAFT ISO/DIS 7619-1 has been withdrawn by the publisher. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF ISO 7619-1 : 2010 | Identical |
| NEN ISO 7619-1 : 2010 | Identical |
| GOST R ISO 7619-1 : 2009 | Identical |
| UNE-ISO 7619-1:2011 | Identical |
| UNI ISO 7619-1 : 2011 | Identical |
| IS 3400 : Part 23 : Sec 1 : 2018 | Identical |
| BS ISO 7619-1:2010 | Identical |
| SANS 7619-1 : 1ED 2009(R2015) | Identical |
| 14/30301257 DC : 0 | BS EN 13160-3 - LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| 15/30298328 DC : 0 | BS ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS |
| ISO 18898:2016 | Rubber Calibration and verification of hardness testers |
| UNI EN ISO 11296-7 : 2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES |
| DIN ISO 8536-6:2012-09 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES (ISO 8536-6:2016) |
| BS ISO 5892:2013 | Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification |
| BS EN 61340-2-3:2016 | Electrostatics Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation |
| 11/30238641 DC : 0 | BS EN 491 - CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - TEST METHODS |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| 14/30266791 DC : 0 | BS EN ISO 7784-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 2: METHOD WITH ABRASIVE RUBBER WHEELS AND ROTATING TEST PANEL |
| ISO 11040-5:2012 | Prefilled syringes — Part 5: Plunger stoppers for injectables |
| DIN EN 14988 E : 2017 | CHILDREN'S HIGH CHAIRS - REQUIREMENTS AND TEST METHODS |
| BS ISO 22882:2016 | Castors and wheels. Requirements for castors for hospital beds |
| DIN ISO 27588:2014-12 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE (ISO 27588:2012) |
| 11/30251982 DC : 0 | BS EN 12697-49 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
| BS ISO 11040-5:2012 | Prefilled syringes Plunger stoppers for injectables |
| ISO 11296-7:2011 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 7: Lining with spirally-wound pipes |
| 07/30164021 DC : 0 | BS ISO 27588 - RUBBER, VULCANIZED OR THERMOSET - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE |
| DIN EN 16821 E : 2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES |
| DIN EN 14988:2016-06 (Draft) | CHILDREN'S HIGH CHAIRS - REQUIREMENTS AND TEST METHODS |
| BS EN 15566:2016 | Railway applications. Railway rolling stock. Draw gear and screw coupling |
| BS ISO 11040-3:2012 | Prefilled syringes Seals for dental local anaesthetic cartridges |
| DIN ISO 11040-5:2013-12 | PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012) |
| DIN ISO 13226:2015-12 | Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011) |
| UNE-EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
| BS ISO 12046:2012 | Synchronous belt drives. Automotive belts. Determination of physical properties |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| BS ISO 1817:2015 | Rubber, vulcanized or thermoplastic. Determination of the effect of liquids |
| UNE-EN 12697-49:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing |
| UNI EN ISO 23936-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| I.S. EN 12697-49:2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
| BS ISO 13226:2011 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| ISO 17420-3:2012 | Respiratory protective devices — Performance requirements — Part 3: Thread connection |
| NF ISO 13226 : 2011 | RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
| ISO 27588:2012 | Rubber, vulcanized or thermoplastic Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
| PREN 15834 : DRAFT 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| BS ISO 13926-3:2012 | Pen systems Seals for pen-injectors for medical use |
| I.S. EN ISO 11296-7:2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011) |
| 17/30353347 DC : 0 | BS EN 148-1 - RESPIRATORY PROTECTIVE DEVICES - THREADS FOR FACEPIECES - PART 1: STANDARD THREAD CONNECTION |
| ISO 14607:2007 | Non-active surgical implants Mammary implants Particular requirements |
| DIN EN 14241-1:2013-11 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| DIN EN 71-4:2013-05 | Safety of toys - Part 4: Experimental sets for chemistry and related activities |
| BS EN ISO 10139-2:2009 | Dentistry. Soft lining materials for removable dentures Materials for long-term use |
| BS EN ISO 7784-2:2016 | Paints and varnishes. Determination of resistance to abrasion Method with abrasive rubber wheels and rotating test specimen |
| BS EN 491:2011 | Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods |
| IEC 61340-2-3:2016 | Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation |
| BS EN 13719:2016 | Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers |
| BS EN 14241-1:2013 | Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners |
| UNE-EN 491:2012 | Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods |
| DIN ISO 8536-6:2017-09 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES (ISO 8536-6:2016) |
| EN 12697-49:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing |
| IEC 61340-2-3:2016 RLV | Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation |
| EN 13160-3:2016 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
| DIN EN 15502-2-1:2017-09 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016) |
| EN 12790:2009 | Child use and care articles - Reclined cradles |
| DIN EN ISO 11296-7:2013-05 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011) |
| EN 13036-4:2011 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
| ONORM EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| NBR 15880 : 2010 | DUCTILE IRON FITTINGS AND ACCESSORIES FOR PIPES OF PVC 6,3 AND POLIETILENE PE - REQUIREMENTS |
| NBR 15803 : 2010 ERRATA 2010 | PRESSURIZED BURIED SYSTEMS FOR WATER DISTRIBUTION AND SEWER - REQUIREMENTS FOR MECHANICAL JOINT COMPRESSION FITTINGS, BRANCH SADDLES AND TAPPING TEE FOR POLYETHYLENE (PE) PIPES FOR NOMINAL OUTSIDE DIAMETERS BETWEEN 20 MM AND 160 MM, WITH MAXIMUM OPERATION PRESSURE UP TO 1.6 MPA |
| NF EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| NBR 15750 : 2009 | PVC-O (ORIENTED UNPLASTICISED POLYVINYL CHLORIDE) PIPING SYSTEMS FOR THE CONVEYANCE OF WATER OR SEWAGE UNDER PRESSURE - REQUIREMENTS AND TEST METHODS |
| ONORM EN 12790 : 2009 | CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| 10/30218554 DC : 0 | BS ISO 13926-3 - PEN SYSTEMS - PART 3: SEALS FOR PEN-INJECTORS FOR MEDICAL USE |
| I.S. EN 14988:2017 | CHILDREN'S HIGH CHAIRS - REQUIREMENTS AND TEST METHODS |
| 18/30363862 DC | BS ISO 8124-10. Safety of toys Part 10. Experimental sets for chemistry and related activities |
| 07/30161895 DC : 0 | BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 16084:2011 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| PD ISO/TS 16096:2014 | Reclaimed isobutene-isoprene (IIR) rubber. Evaluation procedure |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| DIN EN ISO 8362-5 E : 2016 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
| 07/30168855 DC : 0 | BS EN ISO 10139-2 - DENTISTRY - SOFT LINING MATERIALS FOR REMOVABLE DENTURES - PART 2: MATERIALS FOR LONG-TERM USE |
| I.S. EN 15566:2016 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| BS ISO 11040-2:2011 | Prefilled syringes Plunger stoppers for dental local anaesthetic cartridges |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| BS EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods |
| 16/30338439 DC : 0 | BS EN ISO 14903 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| I.S. EN 16084:2011 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| BS ISO 7267-2:2008 | Rubber-covered rollers. Determination of apparent hardness Shore-type durometer method |
| DIN ISO 11040-4 E : 2017 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| 14/30301115 DC : 0 | BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
| PREN 148-1 : DRAFT 2017 | RESPIRATORY PROTECTIVE DEVICES - THREADS FOR FACEPIECES - PART 1: STANDARD THREAD CONNECTION |
| 05/30133342 DC : DRAFT MAY 2005 | ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS |
| 14/30266788 DC : 0 | BS EN ISO 7784-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 1: METHOD WITH ABRASIVE-PAPER COVERED WHEELS AND ROTATING TEST PANEL |
| BS ISO 11040-4:2015 | Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| BS ISO 6356:2012 | Textile and laminate floor coverings. Assessment of static electrical propensity. Walking test |
| BS ISO 18898:2016 | Rubber. Calibration and verification of hardness testers |
| DIN EN 71-13:2014-07 | Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
| UNE-ISO 13226:2017 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers. |
| DIN EN 16084:2011-07 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| IEC 61340-2-3 REDLINE : 2ED 2016 | ELECTROSTATICS - PART 2-3: METHODS OF TEST FOR DETERMINING THE RESISTANCE AND RESISTIVITY OF SOLID MATERIALS USED TO AVOID ELECTROSTATIC CHARGE ACCUMULATION |
| I.S. EN ISO 14607:2009 | NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS (ISO 14607:2018) |
| UNI EN 71-4 : 2013 | SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
| BS EN 15502-2-1 : 2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| ISO 11040-3:2012 | Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges |
| I.S. EN ISO 23936-2:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011) |
| ISO 22883:2004 | Castors and wheels — Requirements for applications up to 1,1 m/s (4 km/h) |
| I.S. EN ISO 12736:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| EN 62133-2:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems |
| DIN EN 13036-4:2011-12 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test; German version EN 13036-4:2011 |
| BS EN 12790:2009 | Child use and care articles. Reclined cradles |
| BS EN 71-4:2013 | Safety of toys Experimental sets for chemistry and related activities |
| I.S. EN 13036-4:2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST |
| I.S. EN ISO 8536-2:2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| I.S. EN 12790:2009 | CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| I.S. EN 71-4:2013 | SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| I.S. EN 13160-3:2016 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| I.S. EN 13719:2016 | GEOSYNTHETICS - DETERMINATION OF THE LONG TERM PROTECTION EFFICIENCY OF GEOSYNTHETICS IN CONTACT WITH GEOSYNTHETIC BARRIERS |
| EN 71-4:2013 | Safety of toys - Part 4: Experimental sets for chemistry and related activities |
| I.S. EN 14241-1:2013 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| I.S. EN ISO 10139-2:2016 | DENTISTRY - SOFT LINING MATERIALS FOR REMOVABLE DENTURES - PART 2: MATERIALS FOR LONG-TERM USE (ISO 10139-2:2016) |
| ONORM EN 71-4 : 2013 | SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
| I.S. EN ISO 7784-2:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 2: METHOD WITH ABRASIVE RUBBER WHEELS AND ROTATING TEST SPECIMEN (ISO 7784-2:2016) |
| I.S. EN 491:2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - TEST METHODS |
| I.S. EN ISO 7784-1:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 1: METHOD WITH ABRASIVE-PAPER COVERED WHEELS AND ROTATING TEST SPECIMEN (ISO 7784-1:2016) |
| UNI EN 13036-4 : 2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| ISO 14903:2017 | Refrigerating systems and heat pumps — Qualification of tightness of components and joints |
| UNE-EN 71-13:2015 | Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
| DIN EN 71-13 E : 2014 | SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
| 14/30312008 DC : 0 | BS EN 61340-2-3 ED. 2 - ELECTROSTATICS - PART 2-3: METHODS OF TEST FOR DETERMINING THE RESISTANCE AND RESISTIVITY OF SOLID MATERIALS USED TO AVOID ELECTROSTATIC CHARGE ACCUMULATION |
| I.S. EN ISO 25649-1:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017) |
| BS EN 62133-2:2017 | Secondary cells and batteries containing alkaline or other non-acidelectrolytes. Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Lithium systems |
| BS EN 12697-49:2014 | Bituminous mixtures. Test methods for hot mix asphalt Determination of friction after polishing |
| PD ISO/TS 16097:2013 | Vulcanized crumb rubber. Evaluation procedures |
| ISO/TS 19708:2007 | Geosynthetics Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method |
| I.S. EN ISO 10139-1:2005 | DENTISTRY - SOFT LINING MATERIALS FOR REMOVABLE DENTURES - PART 1: MATERIALS FOR SHORT-TERM USE (ISO 10139-1:2018) |
| 15/30313584 DC : 0 | BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| 16/30278559 DC : 0 | BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS |
| 10/30219184 DC : 0 | BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| DIN ISO 11040-2 E : 2012 | PREFILLED SYRINGES - PART 2: PLUNGER STOPPERS FOR DENTAL LOCAL ANAESTHETIC CARTRIDGES (ISO 11040-2:2011) |
| 12/30235141 DC : 0 | BS ISO 5892 - RUBBER BUILDING GASKETS - MATERIALS FOR PREFORMED SOLID VULCANIZED STRUCTURAL GASKETS - SPECIFICATION |
| DIN ISO 48:2016-09 | Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010) |
| 10/30216808 DC : 0 | BS ISO 11040-3 - PREFILLED SYRINGES - PART 3: SEALS FOR DENTAL LOCAL ANAESTHETIC CARTRIDGES |
| 13/30273499 DC : 0 | BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| BS EN 14988:2017 | Children\'s high chairs. Requirements and test methods |
| BS EN 60268-7:2011 | Sound system equipment Headphones and earphones |
| DIN EN ISO 8362-2:2016-02 | Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015) |
| DIN ISO 8362-5:2011-06 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| BS ISO 14409 : 2013 | SHIPS AND MARINE TECHNOLOGY - SHIP LAUNCHING AIR BAGS |
| DIN ISO 4649 E : 2014 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ABRASION RESISTANCE USING A ROTATING CYLINDRICAL DRUM DEVICE (ISO 4649:2010) |
| BS EN 15649-1 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN ISO 8362-5:2016 | Injection containers and accessories Freeze drying closures for injection vials |
| UNI EN 12697-49 : 2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
| EN ISO 14903:2017 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017) |
| 17/30355087 DC : 0 | BS ISO 13226 - RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
| UNE-EN 15649-1:2010 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| DIN EN ISO 11296-7 E : 2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011) |
| NF ISO 14409 : 2011 | SHIPS AND MARINE TECHNOLOGY - SHIP LAUNCHING AIR BAGS |
| ISO 10575:2012 | Resilient floor coverings — Specification for rubber sheet floor coverings with backing |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| ISO 13226:2011 | Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| ISO 10577:2012 | Resilient floor coverings — Specification for rubber sheet floor coverings without backing |
| UNE-EN 16084:2011 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints |
| ISO 22882:2016 | Castors and wheels — Requirements for castors for hospital beds |
| BS EN ISO 11296-7:2013 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| PREN 15566 : DRAFT 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| PREN 12542 : DRAFT 2016 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| ISO 14409:2011 | Ships and marine technology — Ship launching air bags |
| ISO 10139-1:2018 | Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use |
| EN ISO 10139-1:2018 | Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2018) |
| EN 14988:2017 | Children's high chairs - Requirements and test methods |
| ISO/TS 16095:2014 | Reclaimed rubber derived from products containing mainly natural rubber Evaluation procedure |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| ISO 8536-6:2016 | Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles |
| DIN EN 12790:2009-07 | Child use and care articles - Reclined cradles |
| DIN EN 13566-7:2007-06 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES |
| DIN EN 14521 E : 2004 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR SMOOTH RUBBER FLOOR COVERINGS WITH OR WITHOUT FOAM BACKING, WITH A DECORATIVE LAYER |
| UNE-EN ISO 7784-1:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016) |
| BS EN 14521:2004 | Resilient floor coverings. Specification for smooth rubber floor coverings with or without foam backing with a decorative layer |
| UNE-EN ISO 7784-2:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016) |
| EN 60268-7:2011 | Sound system equipment - Part 7: Headphones and earphones |
| EN ISO 8362-2:2015 | Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015) |
| ONORM ISO 4649 : 2015 | RUBBER, VULCANIZED OR THERMOPLATIC - DETERMINATION OF ABRASION RESISTANCE USING A ROTATING CYLINDRICAL DRUM DEVICE (ISO 4649:2010) |
| UNI EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| UNI EN 14241-1 : 2013 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| UNI EN 12790 : 2009 | CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| UNI EN 491 : 2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - TEST METHODS |
| BS EN 16821:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Silicone rubber hoses |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| 17/30353012 DC : 0 | BS ISO 13926-2 - PEN SYSTEMS - PART 2: PLUNGER STOPPERS FOR PEN-INJECTORS FOR MEDICAL USE |
| DIN ISO 11040-2:2012-10 | Prefilled syringes - Part 2: Plunger stoppers for dental local anaesthetic cartridges (ISO 11040-2:2011) |
| ISO 7267-2:2008 | Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method |
| CEI EN 61340-2-3 : 2000 | ELECTROSTATICS - PART 2-3: METHODS OF TEST FOR DETERMINING THE RESISTANCE AND RESISTIVITY OF SOLID MATERIALS USED TO AVOID ELECTROSTATIC CHARGE ACCUMULATION |
| BS EN ISO 12736:2014 | Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| PD ISO/TS 16095:2014 | Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure |
| 11/30212464 DC : 0 | BS ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS |
| 11/30219041 DC : DRAFT APR 2011 | BS ISO 14903 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| BS EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers |
| 12/30264198 DC : 0 | BS EN ISO 11296-7 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES |
| BS ISO 10575:2012 | Resilient floor coverings. Specification for rubber sheet floor coverings with backing |
| 14/30304354 DC : 0 | BS EN ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| DIN ISO 4649:2014-03 | Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010) |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| UNI ISO 48 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD) |
| UNE-EN 14988:2018 | Children's high chairs - Requirements and test methods |
| I.S. EN 15502-2-1:2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| DD ISO/TS 19708:2007 | Geosynthetics. Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method |
| 10/30214883 DC : 0 | BS ISO 14409 - SHIPS AND MARINE TECHNOLOGY - SHIPS LAUNCHING AIR BAG |
| DIN EN 15649-1:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN ISO 8362-2:2015 | Injection containers and accessories Closures for injection vials |
| BS ISO 13926-2:2017 | Pen systems Plunger stoppers for pen-injectors for medical use |
| BS ISO 27588:2012 | Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
| 04/30110818 DC : 0 | ISO 18517 - RUBBER, VULCANIZED OR THERMOPLASTIC - HARDNESS TESTING - INTRODUCTION AND GUIDE |
| CEI EN 60268-7 : 2012 | SOUND SYSTEM EQUIPMENT - PART 7: HEADPHONES AND EARPHONES |
| BIS IS 3400-6 : 2012 | METHODS OF TEST FOR VULCANIZED RUBBER - PART 6: DETERMINATION OF THE EFFECT OF LIQUIDS |
| 13/30241415 DC : 0 | BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| DIN EN ISO 8362-5:2016-07 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
| BS ISO 4649:2017 | Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device |
| 08/30172620 DC : DRAFT OCT 2008 | BS EN ISO 8536-6 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES |
| 14/30287623 DC : 0 | BS ISO 10361 - TEXTILE FLOOR COVERINGS - PRODUCTION OF CHANGES IN APPEARANCE BY MEANS OF VETTERMANN DRUM AND HEXAPOD TUMBLER TESTER |
| IEC TS 62989:2018 | Primary optics for concentrator photovoltaic systems |
| ISO 16905:2015 | Resilient floor coverings Specification for rubber floor covering Tile/Plank |
| UNI EN 16084 : 2011 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| ISO 17357-1:2014 | Ships and marine technology — Floating pneumatic rubber fenders — Part 1: High pressure |
| DIN ISO 11040-5 E : 2013 | PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| DIN EN 15502-2-1:2013-01 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| UNI EN 71-13 : 2014 | SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
| UNI EN 15649-1 : 2014 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 8362-5:2016 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
| ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
| ISO/TS 16097:2013 | Vulcanized crumb rubber — Evaluation procedures |
| I.S. EN 71-13:2014 | SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
| 16/30326248 DC : 0 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| EN ISO 11296-7:2013 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011) |
| EN ISO 14607:2018 | Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018, Corrected version 2018-08) |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 10361:2015 | Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
| ISO 11040-2:2011 | Prefilled syringes Part 2: Plunger stoppers for dental local anaesthetic cartridges |
| ISO 11040-4:2015 | Prefilled syringes Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| ISO 18517:2015 | Rubber, vulcanized or thermoplastic Hardness testing Introduction and guide |
| ISO 13926-2:2017 | Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use |
| ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
| I.S. EN ISO 8362-2:2015 | INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION VIALS (ISO 8362-2:2015) |
| I.S. EN 60268-7:2011 | SOUND SYSTEM EQUIPMENT - PART 7: HEADPHONES AND EARPHONES |
| DIN EN 13036-4 E : 2011 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST |
| ISO 7784-1:2016 | Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen |
| BS EN 13566-7:2007 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes |
| ISO 8536-2:2010 | Infusion equipment for medical use — Part 2: Closures for infusion bottles |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| IEC 60268-7:2010 | Sound system equipment - Part 7: Headphones and earphones |
| UNE-EN ISO 10139-2:2016 | Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2016) |
| UNE-EN 13160-3:2017 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
| BS EN 13036-4:2011 | Road and airfield surface characteristics. Test methods Method for measurement of slip/skid resistance of a surface: The pendulum test |
| ISO 8362-5:2016 | Injection containers and accessories Part 5: Freeze drying closures for injection vials |
| ISO 10139-2:2016 | Dentistry Soft lining materials for removable dentures Part 2: Materials for long-term use |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| ISO 8362-2:2015 | Injection containers and accessories — Part 2: Closures for injection vials |
| UNE-ISO 4649:2013 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
| UNE-EN 60268-7:2013 | Sound system equipment -- Part 7: Headphones and earphones |
| ISO 7784-2:2016 | Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen |
| UNE-EN 71-4:2013 | Safety of toys - Part 4: Experimental sets for chemistry and related activities |
| BS EN ISO 8536-2:2010 | Infusion equipment for medical use Closures for infusion bottles |
| UNE-EN 13719:2017 | Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN ISO 8536-2:2010 | Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010) |
| EN 14241-1:2013 | Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
| EN ISO 7784-2:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016) |
| EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
| EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011) |
| ONORM EN 12697-49 : MAY 2014 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING |
| EN ISO 10139-2:2016 | Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2016) |
| EN 13719:2016 | Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers |
| EN 14521:2004 | Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer |
| EN 15649-1:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| EN ISO 7784-1:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016) |
| EN 15502-2-1:2012+A1:2016 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
| EN 16084:2011 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints |
| EN 16821:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses |
| EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| EN ISO 12736:2014 | Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
| EN 491:2011 | Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| 14/30296014 DC : 0 | BS ISO 18517 - RUBBER, VULCANIZED OR THERMOPLASTIC - HARDNESS TESTING - INTRODUCTION AND GUIDE |
| EN 71-13:2014 | Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
| DIN EN 16821:2015-03 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES |
| 07/30160665 DC : 0 | BS EN 12790 - CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| I.S. EN 13566-7:2007 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES |
| UNE-EN 15566:2017 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| BS ISO 48:2010 | Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| BS ISO 8536-6:2016 | Infusion equipment for medical use Freeze drying closures for infusion bottles |
| PREN 13160-3 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| BS ISO 10577:2012 | Resilient floor coverings. Specification for rubber sheet floor coverings without back |
| 14/30288439 DC : 0 | BS ISO 1817 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF THE EFFECT OF LIQUIDS |
| BS ISO 14903:2012 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| BS ISO 17357-1:2014 | Ships and marine technology. Floating pneumatic rubber fenders High pressure |
| PREN 491 : DRAFT 2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - TEST METHODS |
| BS ISO 10361:2015 | Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
| BS EN 71-13:2014 | Safety of toys Olfactory board games, cosmetic kits and gustative games |
| ONORM EN 71-13 : 2014 | SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
| 15/30315109 DC : 0 | BS EN 16821 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - SILICONE RUBBER HOSES |
| BS EN ISO 14903:2017 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| 18/30369393 DC : 0 | BS EN ISO 11296-7 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES |
| DIN ISO 11040-4:2007-10 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| 06/30149088 DC : DRAFT SEP 2006 | ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| S.R. CEN/TS 16165:2016 | DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION |
| 08/30181467 DC : DRAFT JULY 2008 | BS EN 15834 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| 08/30172616 DC : 0 | BS EN ISO 8536-2 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| 14/30301958 DC : 0 | BS EN ISO 8362-2 - INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION |
| 06/30149441 DC : DRAFT SEP 2006 | ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| BS ISO 16905 : 2015 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER FLOOR COVERING - TILE/PLANK |
| I.S. EN 62133-2:2017 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS - PART 2: LITHIUM SYSTEMS |
| I.S. EN 16821:2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| ISO/TS 16096:2014 | Reclaimed isobutene-isoprene (IIR) rubber Evaluation procedure |
| I.S. EN ISO 14903:2017 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS (ISO 14903:2017) |
| ISO 13926-3:2012 | Pen systems Part 3: Seals for pen-injectors for medical use |
| I.S. EN 15649-1:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ISO 12046:2012 | Synchronous belt drives — Automotive belts — Determination of physical properties |
| BS ISO 18517:2015 | Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide |
| UNE-EN ISO 11296-7:2014 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011) |
| UNE-EN 16821:2018 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses |
| EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
| I.S. EN 61340-2-3:2016 | ELECTROSTATICS - PART 2-3: METHODS OF TEST FOR DETERMINING THE RESISTANCE AND RESISTIVITY OF SOLID MATERIALS USED TO AVOID ELECTROSTATIC CHARGE ACCUMULATION |
| ISO 5892:2013 | Rubber building gaskets Materials for preformed solid vulcanized structural gaskets Specification |
| OVE/ONORM EN 60268-7 : 2011 | SOUND SYSTEM EQUIPMENT - PART 7: HEADPHONES AND EARPHONES (IEC 60268-7:2010) |
| DIN EN ISO 8536-2:2010-08 | Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010) |
| UNE-EN 13036-4:2012 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| BS EN ISO 7784-1:2016 | Paints and varnishes. Determination of resistance to abrasion Method with abrasive-paper covered wheels and rotating test specimen |
| CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
| DIN EN 491:2011-11 | Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods |
| EN 61340-2-3:2016 | Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation |
| DIN ISO 11040-4:2017-07 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| DIN EN 14521:2004-09 | Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer |
| EN 13566-7:2007 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes |
| DIN ISO 13926-2:2012-09 | PEN SYSTEMS - PART 2: PLUNGER STOPPERS FOR PEN-INJECTORS FOR MEDICAL USE (ISO 13926-2:2011) |
| ONORM EN ISO 12736 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| ISO 7267-2:2008 | Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 18898:2016 | Rubber Calibration and verification of hardness testers |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO/TR 9272:2005 | Rubber and rubber products Determination of precision for test method standards |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.