• There are no items in your cart

ISO 898-5:2012

Current
Current

The latest, up-to-date edition.

Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

05-30-2012

ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 C to 35 C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range.

Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only.

ISO 898-5:2012 is applicable to set screws and similar fasteners:

  • made of carbon steel or alloy steel,
  • having a triangular ISO metric screw thread according to ISO 68-1,
  • with a coarse pitch thread M1,6 to M30, and fine pitch thread M81 to M302,
  • with diameter/pitch combinations according to ISO 261 and ISO 262, and
  • having thread tolerances according to ISO 965-1 and ISO 965-2.

DevelopmentNote
Supersedes ISO/DIS 898-5. (06/2012)
DocumentType
Standard
Pages
15
PublisherName
International Organization for Standardization
Status
Current
Supersedes

DIN EN ISO 4766:2011-11 Slotted set screws with flat point (ISO 4766:2011)
DIN ISO 2936:2016-10 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HEXAGON SOCKET SCREW KEYS (ISO 2936:2014)
BS ISO 2936:1995 Assembly tools for screws and nuts. Hexagon socket screw keys
ISO 2936:2014 Assembly tools for screws and nuts Hexagon socket screw keys
NF EN ISO 4766 : 2011 SLOTTED SET SCREWS WITH FLAT POINT
I.S. EN ISO 3269:2000 FASTENERS - ACCEPTANCE INSPECTION
UNE-EN ISO 898-1:2015 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
ISO 4029:2003 Hexagon socket set screws with cup point
BS EN ISO 4029:2003 Hexagon socket set screws with cup point
BS EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress
DIN EN ISO 4029:2004-05 Hexagon socket set screws with cup point (ISO 4029:2003)
EN ISO 4029:2003 Hexagon socket set screws with cup point (ISO 4029:2003)
13/30277104 DC : 0 BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
IS 1367 : Part 1 : 2014 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br>
PREN 14389-2 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
ISO 8992:2005 Fasteners — General requirements for bolts, screws, studs and nuts
DIN EN ISO 3506-3:2010-04 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
DIN EN ISO 898-1:2013-05 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
BS EN ISO 4027:2003 Hexagon socket set screws with cone point
BS EN 14389-1:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
DIN EN 24035:1992-02 HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B
I.S. EN ISO 898-1:2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
I.S. EN ISO 3506-3:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
I.S. EN 14389-1:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
BS 4168-3:1994 Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cone point
BS 4168-5:1994 Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cup point
BS 4168-2:1994 Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with flat point
BS 4168-4:1994 Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with dog point
I.S. EN 24035:1992 HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B
I.S. EN ISO 16228:2018 FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017)
PREN 14389-1 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
09/30208236 DC : 0 BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT
UNI EN ISO 4766 : 2012 SLOTTED SET SCREWS WITH FLAT POINT
15/30280562 DC : 0 BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS
DIN ISO 8992:2005-09 Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
PREN ISO 4766 : DRAFT 2009 SLOTTED SET SCREWS WITH FLAT POINT
UNE-EN ISO 4766:2012 Slotted set screws with flat point (ISO 4766:2011)
EN ISO 16228:2018 Fasteners - Types of inspection documents (ISO 16228:2017)
ISO 4028:2003 Hexagon socket set screws with dog point
BS EN ISO 4028:2003 Hexagon socket set screws with dog point
BS EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
EN ISO 3269:2000 FASTENERS - ACCEPTANCE INSPECTION
UNI EN ISO 898-1 : 2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
UNI EN ISO 3506-3 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
ISO 16228:2017 Fasteners — Types of inspection documents
BIS IS 800 : 2007 AMD 1 2012 GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
13/30277107 DC : 0 BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
UNE-EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
IS 1367 : Part 3 : 2017 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS
BS EN ISO 16228:2018 Fasteners. Types of inspection documents
BS EN ISO 2342:2003 Slotted headless screws with shank
BS EN ISO 3269:2001 Fasteners. Acceptance inspection
ISO 3269:2000 Fasteners Acceptance inspection
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
BS EN 14389-2:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
ISO 2342:2003 Slotted headless screws with shank
ISO 4766:2011 Slotted set screws with flat point
UNE-EN ISO 3506-3:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
ISO 4026:2003 Hexagon socket set screws with flat point
ISO 4027:2003 Hexagon socket set screws with cone point
DIN EN ISO 4026:2004-05 Hexagon socket set screws with flat point (ISO 4026:2003)
DIN EN ISO 4028:2004-05 Hexagon socket set screws with dog point (ISO 4028:2003)
EN 24035 : 1991 HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
EN ISO 4766:2011 Slotted set screws with flat point (ISO 4766:2011)
EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
EN ISO 4027:2003 Hexagon socket set screws with cone point (ISO 4027:2003)
EN ISO 4026:2003 Hexagon socket set screws with flat point (ISO 4026:2003)
EN ISO 2342:2003 Slotted headless screws with shank (ISO 2342:2003)
EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
EN ISO 4028 : 2003 Hexagon socket set screws with dog point (ISO 4028:2003)
BS EN ISO 4766:2011 Slotted set screws with flat point
08/30193145 DC : 0 BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
BS ISO 8992:2005 Fasteners. General requirements for bolts, screws, studs and nuts
06/30151815 DC : 0 BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS
I.S. EN ISO 4766:2011 SLOTTED SET SCREWS WITH FLAT POINT
UNI ISO 2936 : 2008 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HEXAGON SOCKET SCREW KEYS
ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress
BS EN ISO 4026:2003 Hexagon socket set screws with flat point
DIN EN ISO 2342:2004-05 Slotted headless screws with shank (ISO 2342:2003)

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ISO 4042:1999 Fasteners Electroplated coatings
ISO 6157-1:1988 Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 16426:2002 Fasteners — Quality assurance system
ISO 965-2:1998 ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
ISO 225:2010 Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
ISO 68-1:1998 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
ISO 261:1998 ISO general purpose metric screw threads General plan
ISO 965-1:2013 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
ISO 965-3:1998 ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

View more information
US$111.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.