ISO 9227:2017
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Corrosion tests in artificial atmospheres — Salt spray tests
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
11-11-2022
Language(s)
English, French
Published date
03-17-2017
ISO 9227:2017 specifies the apparatus, the reagents and the procedure to be used in conducting the neutral salt spray (NSS), acetic acid salt spray (AASS) and copper-accelerated acetic acid salt spray (CASS) tests for assessment of the corrosion resistance of metallic materials, with or without permanent or temporary corrosion protection.
It also describes the method employed to evaluate the corrosivity of the test cabinet environment.
It does not specify the dimensions or types of test specimens, the exposure period to be used for a particular product, or the interpretation of results. Such details are provided in the appropriate product specifications.
The salt spray tests are particularly useful for detecting discontinuities, such as pores and other defects, in certain metallic, organic, anodic oxide and conversion coatings.
The neutral salt spray (NSS) test particularly applies to
- metals and their alloys,
- metallic coatings (anodic and cathodic),
- conversion coatings,
- anodic oxide coatings, and
- organic coatings on metallic materials.
The acetic acid salt spray (AASS) test is especially useful for testing decorative coatings of copper + nickel + chromium, or nickel + chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.
The copper-accelerated acetic acid salt spray (CASS) test is useful for testing decorative coatings of copper + nickel + chromium, or nickel + chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.
The salt spray methods are all suitable for checking that the quality of a metallic material, with or without corrosion protection, is maintained. They are not intended to be used for comparative testing as a means of ranking different materials relative to each other with respect to corrosion resistance or as means of predicting long-term corrosion resistance of the tested material.
| DevelopmentNote |
Supersedes ISO 3770, ISO 3769 and ISO 3768. (04/2001) Supersedes ISO 7253. (07/2006) Supersedes ISO/DIS 9227. (03/2017)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 9227 : 2017 | Identical |
| DS EN ISO 9227 : 2017 | Identical |
| DIN EN ISO 9227:2017-07 | Identical |
| NEN EN ISO 9227 : 2017 | Identical |
| NS EN ISO 9227 : 2017 | Identical |
| I.S. EN ISO 9227:2017 | Identical |
| PN EN ISO 9227 : 2017 | Identical |
| SN EN ISO 9227 : 2017 | Identical |
| UNI EN ISO 9227 : 2012 | Identical |
| SS-EN ISO 9227:2017 | Identical |
| UNI EN ISO 9227:2017 | Identical |
| BS EN ISO 9227:2017 | Identical |
| UNE-EN ISO 9227:2017 | Identical |
| EN ISO 9227:2017 | Identical |
| NF EN ISO 9227 : 2017 | Identical |
| DIN EN ISO 9227 E : 2017 | Identical |
| DIN 50021:1988-06 | Corresponds |
| UNE 112017:1992 | Identical |
| UNI ISO 9227 : 1993 | Identical |
| SN ISO 9227 : 2005 | Identical |
| SAC GB/T 10125 : 1997 | Identical |
| SANS 9227 : 3ED 2014 | Identical |
| NF ISO 9227 : 1991 | Identical |
| SNV ISO 9227 : 1990 | Identical |
| DIN EN 15646 E : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| XP E29 826 : 2017 XP | STAINLESS STEEL PLIABLE CORRUGATED HOSE KITS FOR GAS WITH AN OPERATING PRESSURE UP TO 2 BAR |
| SAE J 2552 : 2014 | PUSH-ON HOSE AND MATING HOSE FITTINGS |
| BS EN 62444:2013 | Cable glands for electrical installations |
| 17/30354650 DC : DRAFT SEP 2017 | BS EN 71-14 - SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| UNE-EN ISO 13129:2013 | Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012) |
| BS ISO 17268 : 2012 | GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES |
| ISO/TS 18684:2015 | Timekeeping instruments Watch external parts made of hard materials General requirements and test methods |
| BS EN ISO/IEC 10373:1995 | Identification cards. Test methods |
| BS EN 15288-1 : 2008 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| BS EN ISO 8936:2017 | Awnings for leisure accommodation vehicles. Requirements and test methods |
| 06/30153650 DC : DRAFT JULY 2006 | EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| UNE-EN ISO 16701:2015 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10) |
| UNI EN ISO 16151 : 2008 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS |
| 10/30228056 DC : 0 | |
| UNI EN ISO 4521 : 2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| 05/30125061 DC : DRAFT MAR 2005 | ISO 9974-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER STUD ENDS WITH ISO 261 THREADS WITH ELASTOMER METAL-TO-METAL SEALING - PART 4: DIMENSIONS, METHODS AND REQUIREMENTS FOR EXTERNAL PORT PLUGS |
| DIN EN 16716:2015-08 (Draft) | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| 13/30283193 DC : 0 | BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
| 95/108834 DC : DRAFT NOV 1995 | PREN 12209-2 - BUILDING HARDWARE - LOCKS AND LATCHES - PART 2: STRIKING PLATES FOR MECHANICALLY OPERATED LOCKS AND LATCHES - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 15730:2016 | Metallic and other inorganic coatings. Electropolishing as a means of smoothing and passivating stainless steel |
| 06/30156314 DC : 0 | BS EN 13120 - INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| 16/30341197 DC : 0 | BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| DIN EN ISO 2080:2009-08 | Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008) |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| BS ISO 12991:2012 | Liquefied natural gas (LNG). Tanks for on-board storage as a fuel for automotive vehicles |
| 10/30199074 DC : 0 | BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| 16/30340613 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| 05/30133040 DC : DRAFT APR 2005 | BS EN 1866 - MOBILE FIRE EXTINGUISHERS |
| ONORM EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| 09/30187671 DC : 0 | BS EN ISO 7599 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM |
| 05/30128692 DC : DRAFT FEB 2005 | ISO 8168 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF HEAT- AND CORROSION-RESISTANT STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION |
| 11/30229694 DC : 0 | BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
| PREN 1442 : DRAFT 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| 13/30279702 DC : 0 | BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 12373-1:2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
| UNI EN ISO 2080 : 2009 | METALLIC AND OTHER INORGANIC COATINGS - SURFACE TREATMENT, METALLIC AND OTHER INORGANIC COATINGS - VOCABULARY |
| 15/30327431 DC : 0 | BS ISO 15741 - PAINTS AND VARNISHES - FRICTION-REDUCTION COATINGS FOR THE INTERIOR OF ON- AND OFFSHORE STEEL PIPELINES FOR NON-CORROSIVE GASES |
| UNI EN 15714-4 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 05/30129619 DC : DRAFT FEB 2005 | IEC 61537 ED.2 - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS FOR CABLE MANAGEMENT |
| 12/30197523 DC : 0 | BS ISO 12619-2 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| BS EN ISO 2919:2014 | Radiological protection. Sealed radioactive sources. General requirements and classification |
| 99/718298 DC : DRAFT DEC 1999 | PREN 13785 - REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100KGH |
| BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| 12/30247181 DC : DRAFT JAN 2012 | BS ISO 28340 - COMBINED COATINGS ON ALUMINIUM - GENERAL SPECIFICATIONS FOR COMBINED COATINGS OF ELECTROPHORETIC ORGANIC COATINGS AND ANODIC OXIDATION COATINGS ON ALUMINIUM |
| 07/30168404 DC : DRAFT DEC 2007 | BS EN 508-1 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| BS ISO 8434-1 : 94 AMD 9583 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE COMPRESSION FITTINGS |
| PREN 62275 : DRAFT 2014 | CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS (IEC 62275:2013, MODIFIED) |
| 02/103309 DC : DRAFT MAY 2002 | BS EN 14455 - DEVICES TO PREVENT POLLUTION BY BLACKFLOW OF POTABLE WATER - PRESSURISED AIR INLET VALVES DN 15 TO DN 50 INCLUSIVE - FAMILY L, TYPE A AND TYPE B |
| 14/30309758 DC : 0 | BS EN ISO 4623-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES |
| 10/30200337 DC : 0 | BS EN ISO 13129 - PAINTS AND VARNISHES - ELECTROCHEMICAL MEASUREMENT OF THE PROTECTION PROVIDED TO STEEL BY PAINT COATINGS - CURRENT INTERRUPTER (CI) TECHNIQUE, RELAXATION VOLTAMMETRY (RV) OR DC TRANSIENT (DCT) MEASUREMENTS |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| DIN ISO 12151-3 E : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS (ISO 12151-3:2010) |
| IEC 62444:2010 | Cable glands for electrical installations |
| 15/30323936 DC : 0 | BS EN 3833 - AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| 06/30111976 DC : 0 | EN 354 - PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTION OF FALLS FROM HEIGHT - LANYARDS |
| BS EN 4704:2012 | Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
| 10/30196552 DC : 0 | BS EN ISO 15027-2 - IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
| PREN ISO 10380 : DRAFT 2011 | PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES |
| 12/30237859 DC : 0 | BS ISO 16539 - CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC CORROSION TESTS WITH EXPOSURE TO SYNTHETIC OCEAN WATER SALT-DEPOSITION PROCESS -"DRY" AND "WET" CONDITIONS AT CONSTANT ABSOLUTE HUMIDITY |
| ISO 16024:2005 | Personal protective equipment for protection against falls from a height — Flexible horizontal lifeline systems |
| 98/714983 DC : DRAFT SEP 1998 | ISO/CD 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: EXTERNAL HEX AND INTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| BS ISO 12151-2:2003 | Connections for hydraulic fluid power and general use — Hose fittings Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings |
| SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
| NF EN ISO 10862 : 2009 | SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS |
| BS ISO 8434-2:2007 | Metallic tube connections for fluid power and general use 37° flared connectors |
| BS ISO 17746:2016 | Steel wire rope net panels and rolls. Definitions and specifications |
| 00/715331 DC : 0 | ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| DIN EN 15644 E : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 12/30258463 DC : 0 | BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| BS 2A 302:2000 | Nuts, self-locking, with maximum operating temperatures less than or equal to 425°C. Procurement specification |
| ISO 12151-3:2010 | Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| 10/30216811 DC : 0 | BS ISO 2919 - RADIATION PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
| 15/30315879 DC : 0 | BS ISO 12619-2:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| 11/30232164 DC : 0 | BS ISO 12140 - AGRICULTURAL MACHINERY - AGRICULTURAL TRAILERS AND TRAILED EQUIPMENT - DRAWBAR JACKS |
| I.S. EN 15646:2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| BS EN 3021:2017 | Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
| 02/564504 DC : DRAFT OCT 2002 | BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| 00/702974 DC : DRAFT JAN 2000 | |
| 93/706720 DC : 0 | PREN 2535 - AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| 08/30175210 DC : DRAFT APR 2008 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| PREN 358 : DRAFT 2015 | PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS AND LANYARDS FOR WORK POSITIONING OR RESTRAINT |
| 06/30146267 DC : DRAFT FEB 2006 | ISO 11154 - ROAD VEHICLES - ROOF LOAD CARRIERS |
| 04/30126819 DC : DRAFT DEC 2004 | EN 15096 - HOSE UNION ANTI-VACUUM VALVES - DN15 TO DN25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| 98/714984 DC : DRAFT SEP 1998 | ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS |
| 00/107336 DC : DRAFT OCT 2000 | PREN 13959 - ANTI-POLLUTION CHECK VALVES DN 6 TO DN 250 INCLUSIVE - FAMILY E, TYPE A, B, C AND D |
| DIN EN 15288-1:2010-12 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| BS ISO 4148:2004 | Road vehicles. Special warning lamps. Dimensions |
| BS EN 12966:2014 | Road vertical signs. Variable message traffic signs |
| 99/104927 DC : DRAFT JUN 1999 | PREN 13618 - WATER SUPPLY, FLEXIBLE HOSES (METALLIC AND ELASTOMERIC MATERIALS) - SPECIFICATION AND TEST METHODS |
| CSA Z259.12 : 2011 : R2016 | CONNECTING COMPONENTS FOR PERSONAL FALL-ARREST SYSTEMS (PFAS) |
| IEEE 1591.2-2017 | IEEE Standard for Testing and Performance of Hardware for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable |
| 05/30128668 DC : DRAFT FEB 2005 | ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT |
| 06/30112897 DC : DRAFT AUG 2006 | EN 1670 - BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| UNE-EN 15646:2010 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| 03/103084 DC : DRAFT FEB 2003 | EN 1497 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES |
| BS ISO 12151-5:2007 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-2 37° flared ends |
| CSA ISO/IEC 10373-1 : 2007 : INC : AMD 1 : 2014 : R2017 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| BS ISO 1458:2002 | Metallic coatings. Electrodeposited coatings of nickel |
| CEI EN 61537 : 2007 | CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS |
| ISO 16253:2017 | Watch-cases and accessories — Vapour phase deposited coatings |
| 07/30166909 DC : DRAFT AUG 2007 | BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| PREN 2642 : 200P1 | AEROSPACE SERIES - STRUCTURAL ADHESIVE SYSTEMS - ADHESIVE FILM - TECHNICAL SPECIFICATION |
| CSA ISO/IEC 10373-1:2007 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| DIN EN 14353 E : 2017 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 14225-2 : DRAFT 2014 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| PREN 2583 : DRAFT 2018 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| DIN EN 16927 E : 2017 | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| ISO 4039-1:1998 | Road vehicles — Pneumatic braking systems — Part 1: Pipes, male fittings and tapped holes with facial sealing surface |
| PREN 3021 : DRAFT 2015 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| PREN 4827 : DRAFT 2015 | AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 358:2000 | PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS FOR WORK POSITIONING AND RESTRAINT AND WORK POSITIONING LANYARDS |
| DIN EN 71-14:2015-03 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| PREN 14140 : DRAFT 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| I.S. EN 16927:2017 | MINI-POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI-POOLS |
| ISO 12619-2:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods |
| I.S. EN 10169:2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 4827:2017 | Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| SAE J 2995 : 2017 | STRENGTH AND DURABILITY TESTING FOR AUTOMOTIVE HYDRAULIC BRAKE COMPONENTS |
| I.S. EN 3021:2017 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| BS EN 14353 : 2007 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| ISO 15171-2:2016 | Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure |
| I.S. EN ISO 12401:2009 | SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 14469-3:2006 | Road vehicles Compressed natural gas (CNG) refuelling connector Part 3: 25 MPa (250 bar) connector |
| ISO 4039-2:1998 | Road vehicles Pneumatic braking systems Part 2: Pipes, male fittings and holes with conical sealing surface |
| I.S. EN 13565-1:2004 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| BS EN ISO 11130:2018 | Corrosion of metals and alloys. Alternate immersion test in salt solution |
| I.S. EN 15714-2:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| ISO 28278-1:2011 | Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing |
| I.S. EN 16207:2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| I.S. EN ISO 7599:2018 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM (ISO 7599:2018) |
| ISO 6742-4:2015 | Cycles — Lighting and retro-reflective devices — Part 4: Lighting systems powered by the cycle's movement |
| ISO 25537:2008 | Glass in building — Silvered, flat-glass mirror |
| ISO 16539:2013 | Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity |
| EN 14225-2:2017 | Diving suits - Part 2: Dry suits - Requirements and test methods |
| I.S. EN ISO 14469:2017-10 | ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) REFUELLING CONNECTOR (ISO 14469:2017) |
| DIN EN 14428:2015-09 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| ISO 5858:1999 | Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C Procurement specification |
| 16/30340711 DC : 0 | BS EN 16602-70-14 - SPACE PRODUCT ASSURANCE - CORROSION |
| BS EN 14225-2:2017 | Diving suits Dry suits. Requirements and test methods |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| UNE-EN ISO 2081:2010 | Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2008) |
| DIN EN ISO 8434-1 E : 2008 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| BS EN ISO 12944-6:2018 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods |
| BS EN ISO 2081:2018 | Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel |
| SAE J 1502 : 2013 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC |
| BS EN 71-14 : 2014 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| ISO 23269-2:2011 | Ships and marine technology — Breathing apparatus for ships — Part 2: Self-contained breathing apparatus for shipboard firefighters |
| BS EN ISO 10683:2014 | Fasteners. Non-electrolytically applied zinc flake coatings |
| I.S. EN 13071-1:2008 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| UNE-EN ISO 10683:2015 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| BS EN ISO 4042:2000 | Fasteners. Electroplated coatings |
| EN ISO 4042:1999 | FASTENERS - ELECTROPLATED COATINGS (ISO 4042:1999) |
| UNE-EN 15288-1:2009 | Swimming pools - Part 1: Safety requirements for design |
| DIN EN ISO 2081:2016-04 (Draft) | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| ISO 14469-1:2004 | Road vehicles Compressed natural gas (CNG) refuelling connector Part 1: 20 MPa (200 bar) connector |
| EN ISO 12944-9:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018) |
| ASTM B 912 : 2002 : R2018 | Standard Specification for Passivation of Stainless Steels Using Electropolishing |
| ISO 22779:2006 | Metallic coatings — Physical vapour-deposited coatings of aluminium — Specification and test methods |
| NF EN 2516 : 1997 | AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTING STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| I.S. EN 2516:1997 | AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTING STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| ISO 11997-1:2017 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid |
| IEC 61035-2-4:1995 | Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 4: Conduit fittings of aluminium alloy |
| ISO/IEC 10373:1993 | Identification cards Test methods |
| EN 2516:1997 | Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys |
| I.S. EN ISO 17872:2007 | PAINTS AND VARNISHES - GUIDELINES FOR THE INTRODUCTION OF SCRIBE MARKS THROUGH COATINGS ON METALLIC PANELS FOR CORROSION TESTING |
| BS EN 13120 : 2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 1670:2007-06 | Building hardware - Corrosion resistance - Requirements and test methods |
| DIN EN 13261:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| DIN EN 13434:2006-05 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G - TYPE B |
| DIN EN 14268 E : 2005 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| DIN EN 13561:2015-08 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 13433:2006-05 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G - TYPE A |
| DIN EN 12195-2:2001-02 | LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES |
| DIN EN 14267 E : 2004 | IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS |
| BS EN ISO 12402-7 : 2007 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 12966-1 : 2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| BS EN 13785 : 2005 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS EN 14200:2004 | Railway applications. Suspension components. Parabolic springs, steel |
| BS EN 14454:2005 | Devices to prevent pollution by backflow of potable water. Hose union backflow preventer DN 15 to DN 32 inclusive. Family H, type A |
| BS EN 813:1997 | Personal protective equipment for prevention of falls from a height. Sit harnesses |
| UNE-EN ISO 4623-2:2016 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016) |
| BS EN 13146-6:2012 | Railway applications. Track. Test methods for fastening systems Effect of severe environmental conditions |
| BS EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| UNE-EN 354:2011 | Personal fall protection equipment - Lanyards |
| UNE-EN ISO 3613:2011 | Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010) |
| DIN EN 15266 E : 2007 | STAINLESS STEEL PLIABLE CORRUGATED TUBING KITS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR |
| BS EN 12806:2003 | Automotive liquefied petroleum gas components. Other than containers |
| BS EN 12206-1:2004 | Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder |
| UNE-EN 671-2:2013 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| BS EN 13523-8:2017 | Coil coated metals. Test methods Resistance to salt spray (fog) |
| BS EN 341:2011 | Personal fall protection equipment. Descender devices for rescue |
| UNE-EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| BS EN 14267:2004 | Irrigation techniques. Irrigation hydrants |
| ISO 12402-7:2006 | Personal flotation devices Part 7: Materials and components Safety requirements and test methods |
| BS EN 13913:2003 | Railway applications. Rubber suspension components. Elastomer-based mechanical parts |
| BS EN 13786 : 2004 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS EN 13802:2013 | Railway applications. Suspension components. Hydraulic dampers |
| BS EN 12195-2:2001 | Load restraint assemblies on road vehicles. Safety Web lashing made from man-made fibres |
| UNE-EN 331:2016 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 12899-3:2007 | Fixed, vertical road traffic signs Delineator posts and retroreflectors |
| BS EN 354:2010 | Personal fall protection equipment. Lanyards |
| BS EN ISO 8434-4:2000 | Metallic tube connections for fluid power and general use 24° cone connectors with O-ring weld-on nipples |
| BS EN 14453:2005 | Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C |
| BS EN ISO 3613:2010 | Metallic and other inorganic coatings. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods |
| BS EN 3-7 : 2004 | PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| BS EN 13261 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| BS EN ISO 9142:2003 | Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| BS EN 13246:2001 | Packaging. Specification for tensional steel strapping |
| UNE-EN 13146-6:2012 | Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions |
| BS EN 13433:2007 | Devices to prevent pollution by backflow of potable water. Mechanical disconnector, direct actuated. Family G, type A |
| BS EN 14566 : 2008 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 393:1994 | Lifejackets and personal buoyancy aids. Buoyancy aid 50 |
| BS EN 1497:2007 | Personal fall protection equipment. Rescue harnesses |
| BS EN 13760:2003 | Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions |
| BS EN 1498:2006 | Personal fall protection equipment. Rescue loops |
| EN 2133:2010 | Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys |
| I.S. EN 10223-7:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| DIN EN 14195:2015-03 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 3-7:2007-10 | PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN 14782:2006-03 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| EN 1096-2:2012 | Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings |
| EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| EN 10223-8:2013 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| EN 62444 : 2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
| EN 10223-7:2012 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| DIN EN 14800:2007-06 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| EN 13561:2015/AC:2016 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| EN 12676-2 : 2000 | ANTI-GLARE SYSTEMS FOR ROADS - PART 2: TEST METHODS |
| EN 10223-3:2013 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN 12729:2002 | Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A |
| DIN EN 15496:2008-04 | Cycles - Requirements and test methods for cycle locks |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN 508-1:2000-12 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| EN 12195-2:2000 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres |
| EN 12487:2007/AC:2008 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| EN ISO 12401:2009 | Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009) |
| I.S. EN 13760:2003 | AUTOMOTIVE LPG FILLING SYSTEM FOR LIGHT AND HEAVY DUTY VEHICLES - NOZZLE, TEST REQUIREMENTS AND DIMENSIONS |
| EN 13433:2006 | Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A |
| DIN EN 1496:2017-03 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| EN 12806:2003 | Automotive liquefied petroleum gas components - Other than containers |
| EN ISO 2082:2017 | Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017) |
| EN 12540 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM |
| EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
| DIN ISO 12151-2:2004-01 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24? cone connector ends with O-rings (ISO 12151-2:2003) |
| EN 12864:2001/A3:2009 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| UNI EN 14601 : 2010 | RAILWAY APPLICATIONS - STRAIGHT AND ANGLED END COCKS FOR BRAKE PIPE AND MAIN RESERVOIR PIPE |
| DIN EN ISO 10683:2001-02 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| EN 62271-202:2014/AC:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014) |
| DIN EN ISO 4611:2011-04 | Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010) |
| DIN EN ISO 9142:2004-05 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
| DIN EN 14453:2005-08 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C; German version EN 14453:2005 |
| EN 13071 : 2002 | SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE |
| EN 12676-1:2000/A1:2003 | ANTI-GLARE SYSTEMS FOR ROADS - PART 1: PERFORMANCE AND CHARACTERISTICS |
| UNI EN 508-1 : 2014 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| EN ISO 1456:2009 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009) |
| EN 12330 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL |
| EN ISO 2080:2009 | Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008) |
| EN 12966-1:2005+A1:2009 | Road vertical signs - Variable message traffic signs - Part 1: Product standard |
| EN 12476 : 2000 | PHOSPHATE CONVERSION COATINGS OF METALS - METHOD OF SPECIFYING REQUIREMENTS |
| EN 13246:2001 | Packaging - Specification for tensional steel strapping |
| EN 13146-6:2012 | Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 13438:2013 | Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| DIN EN ISO 8434-1:2008-02 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| EN 12899-3:2007 | Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors |
| DIN EN 71-14:2017-11 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| DIN EN ISO 4527:2003-10 | METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS |
| DIN EN ISO 17268:2017-03 | GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012) |
| EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| DEFSTAN 42-34/2(1997) : 1997 | EXTINGUISHERS, FIRE, WHEELED TYPE - 90 LITRE FOAM, AIR TRANSPORTABLE/GROUND USE |
| I.S. EN 13200-4:2006 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
| I.S. EN 12729:2002 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - CONTROLLABLE BACKFLOW PREVENTER WITH REDUCED PRESSURE ZONE - FAMILY B - TYPE A |
| ONORM EN 14428 : 2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| ONORM EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 02/714197 DC : DRAFT DEC 2002 | PREN 14601 - RAILWAY APPLICATIONS - STRAIGHT AND ANGLED END COCKS FOR BRAKE PIPE AND MAIN RESERVOIR PIPE |
| BS EN ISO 14469:2017 | Road vehicles. Compressed natural gas (CNG) refuelling connector |
| ISO 10333-1:2000 | Personal fall-arrest systems — Part 1: Full-body harnesses |
| ISO 10333-5:2001 | Personal fall-arrest systems — Part 5: Connectors with self-closing and self-locking gates |
| DIN EN ISO 16151:2008-07 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIFIED SALT SPRAY, 'DRY' AND 'WET' CONDITIONS |
| 11/30194638 DC : 0 | BS ISO 12991 - LIQUEFIED NATURAL GAS (LNG) - TRANSPORTABLE TANKS FOR USE ON BOARD VEHICLES |
| 11/30218155 DC : 0 | BS EN ISO 10380 - PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES |
| I.S. EN ISO 8434-1:2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| BS EN 16451:2015 | Railway applications. Braking. Brake pad holder |
| 12/30276397 DC : 0 | BS ISO/IEC 18745-1 - TEST METHODS FOR MACHINE READABLE TRAVEL DOCUMENTS (MRTD) - PART 1: PHYSICAL TEST METHODS FOR PASSPORT BOOKS (DURABILITY) |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| 97/704453 DC : DRAFT MAR 1997 | ISO/DIS 11154-2 - ROAD VEHICLES - ROOF LOAD CARRIERS - PART 2: ACCESSORIES AND THEIR ATTACHMENTS TO ROOF BARS FOR SPECIAL PURPOSE APPLICATIONS |
| DIN EN 1866:2006-03 | MOBILE FIRE EXTINGUISHERS |
| 13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| CSA Z259.2.3 : 2016 | DESCENT DEVICES |
| 11/30241848 DC : 0 | BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 15096 E : 2008 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 12330:2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL |
| BS EN 14506:2005 | Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C |
| 15/30322585 DC : 0 | BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 12329:2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| 12/30271676 DC : 0 | BS EN 353-1 - REV PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
| UNE-EN ISO 19598:2017 | Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016) |
| BS EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| BS ISO 15734:2001 | Ships and marine technology. Hydrostatic release units |
| 05/30110749 DC : DRAFT SEP 2005 | ISO/IEC 10373-1 - IDENTIFICATION CARDS - PART 1: GENERAL CHARACTERISTICS |
| 14/30302455 DC : 0 | BS EN 13659 - SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN ISO 22068 E : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| BS EN ISO 7599:2018 | Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| BS ISO 9650-3:2009 | Small craft. Inflatable liferafts Materials |
| BS EN ISO 2082:2017 | Metallic and other inorganic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel |
| 14/30298696 DC : 0 | BS ISO 3160-2 - WATCH-CASES AND ACCESSORIES - GOLD ALLOY COVERINGS - PART 2: DETERMINATION OF FINENESS, THICKNESS, CORROSION RESISTANCE AND ADHESION |
| 11/30229160 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| BS EN ISO 9717:2017 | Metallic and other inorganic coatings. Phosphate conversion coating of metals |
| 99/716445 DC : DRAFT NOV 99 | AUTOMOTIVE LPG FILLING SYSTEM - PART 1: DIMENSIONS AND TEST REQUIREMENTS FOR THE CONNECTOR |
| DIN EN ISO 8936 E : 2017 | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
| 12/30254992 DC : 0 | BS ISO 12614-2 - ROAD VEHICLES - LIQUEFIED NATURAL GAS (LNG) FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| 15/30328805 DC : 0 | BS EN 16927 - MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| DIN EN ISO 12401:2010-01 | Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009) |
| 03/317246 DC : 0 | ISO 2081 - METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| 09/30195875 DC : 0 | BS ISO 10074 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - SPECIFICATION FOR HARD ANODIC OXIDATION COATINGS ON ALUMINIUM AND ITS ALLOYS |
| 15/30324466 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 12864:2001 | LOW-PRESSURE, NON-ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| DIN EN ISO 15730:2016-09 | Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2000) |
| DIN EN 16451:2015-09 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| 03/321258 DC : 0 | ISO/DIS 2082 - METALLIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| BS EN 10223-8:2013 | Steel wire and wire products for fencing and netting Welded mesh gabion products |
| 11/30242282 DC : 0 | BS EN 4695 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE G, H AND K |
| 14/30302452 DC : 0 | BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| 18/30347942 DC : DRAFT APR 2018 | BS ISO 20766-9 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 9: PRESSURE RELIEVE DEVICE (PRD) |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| BS ISO 13486-1:1999 | Road vehicles. Hydraulic braking systems Double-flare pipes, tapped holes, male fittings and tube seats |
| 11/30237817 DC : 0 | BS ISO 7076-2 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 2: LOW EXPANSION FOAM EQUIPMENT |
| ISO 11934:1997 | X and gamma radiation Indirect- or direct- reading capacitor-type pocket dosemeters |
| 16/30290140 DC : 0 | BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| 14/30300966 DC : 0 | BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| 12/30271191 DC : 0 | BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| UNI EN 15644 : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 15/30263133 DC : 0 | BS ISO 14878 - CYCLES - AUDIO WARNING DEVICES - TECHNICAL SPECIFICATION AND TEST METHODS |
| 05/30135789 DC : DRAFT JUL 2005 | EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| BS ISO 22068 : 2012 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| BS ISO 15741:2016 | Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| 04/102832 DC : DRAFT JAN 2004 | ISO 13985 - LIQUID HYDROGEN - LAND VEHICLE FUEL TANKS |
| BS ISO 6856:2005 | Road vehicles. Unscreened high-voltage ignition cable assemblies. Test methods and general requirements |
| 11/30242278 DC : 0 | BS EN 4693 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE A, B AND C |
| BS ISO 8434-6:2009 | Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring |
| 17/30347933 DC : 0 | BS ISO 20766-4 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - PART 4: LEVEL INDICATOR |
| EN ISO 2081:2018 | Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2018) |
| PREN 16129 : DRAFT 2010 | PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 100 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| 97/704454 DC : DRAFT MAR 1997 | ISO/DIS 11154-3 - ROAD VEHICLES - ROOF LOAD CARRIERS - PART 3: SPECIFIC PURPOSE ROOF DEVICES |
| PREN 1496 : DRAFT 2015 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| 14/30287215 DC : 0 | BS ISO 18869 - HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS |
| 11/30237814 DC : 0 | BS ISO 7076-1 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 1: FOAM PROPORTIONING EQUIPMENT |
| BS EN ISO 12401:2009 | Small craft. Deck safety harness and safety line. Safety requirements and test methods |
| BS EN 13565-1 : 2003 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| 15/30280950 DC : 0 | BS EN ISO 8936 - AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS |
| EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| 14/30287198 DC : 0 | BS ISO 15171-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 2: COUPLING FOR CONNECTION UNDER PRESSURE |
| PREN ISO 4611 : DRAFT 2010 | PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST |
| BS ISO 27667:2011 | Road vehicles. Brake lining friction materials. Evaluation of corrosion effects on painted backing plates and brake shoes |
| BS EN 15714-3:2009 | Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements |
| BS ISO 12151-6:2009 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-6 60° cone ends |
| 11/30232899 DC : 0 | BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76 |
| PREN 62444 : DRAFT 2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
| BS ISO 14960-2:2014 | Tubeless tyres. Valves and components Clamp-in tubeless tyre valve-test method |
| BS ISO 23269-1:2008 | Ships and marine technology. Breathing apparatus for ships Emergency escape breathing devices (EEBD) for shipboard use |
| 16/30321230 DC : DRAFT APR 2016 | BS EN ISO 9717 - METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS |
| BIS IS/ISO 13985 : 2006 | LIQUID HYDROGEN - LAND VEHICLES FUEL TANKS |
| ISO 7599:2018 | Anodizing of aluminium and its alloys — Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| BS ISO 11243:1994 | Cycles. Luggage carriers for bicycles. Concepts, classification and testing |
| BS ISO 6149-4 : 2006 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| 13/30275356 DC : 0 | BS EN 12966 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| BS EN 16927:2017 | Mini-pools. Specific requirements including safety and test methods for mini-pools |
| 06/30115482 DC : DRAFT JULY 2006 | |
| BS ISO 3160-2:2015 | Watch-cases and accessories. Gold alloy coverings Determination of fineness, thickness, corrosion resistance and adhesion |
| 11/30242281 DC : 0 | BS EN 4694 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
| 01/702402 DC : DRAFT JAN 2001 | ISO/DIS 11154-4 - ROAD VEHICLES - ROOF LOAD CARRIERS - PART 4: MAGNETIC FIXING DEVICES |
| XP PREN 3833 : 1998 XP | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| 07/30166915 DC : DRAFT AUG 2007 | BS EN 15714-4 - INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| UNE-EN 16716:2017 | Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods |
| ONORM EN ISO 8434-1 : 2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| BS EN 16716:2017 | Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods |
| ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
| PREN 13146-6 : DRAFT 2009 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS |
| BS EN ISO 1456:2009 | Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| 06/30106554 DC : DRAFT APR 2006 | ISO 17872 - PAINTS AND VARNISHES - GUIDELINES FOR THE INTRODUCTION OF SCRIBE MARKS THROUGH COATINGS ON METALLIC PANELS FOR CORROSION |
| PREN ISO 16701 : DRAFT 2011 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO/DIS 16701:2011) |
| ISO/TS 16688:2017 | Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications |
| PREN 13523-8 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| CSA C22.2 No. 61010-2-012 : 2017 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| 17/30323851 DC : 0 | BS ISO 19894 - WALKING TROLLEYS - REQUIREMENTS AND TEST METHODS |
| PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| ISO 15171-1:1999 | Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 1: Coupling not for connection under pressure |
| 07/30154920 DC : 0 | BS ISO 7165 - FIRE FIGHTING - PORTABLE FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION |
| 14/30310323 DC : 0 | BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| UNI ISO 12151-6 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS |
| 06/30156789 DC : 0 | BS EN 15595 - RAILWAY APPLICATIONS - BRAKING - WHEEL SLIP PREVENTION EQUIPMENT |
| EN 14344:2004 | Child use and care articles - Child seats for cycles - Safety requirements and test methods |
| 08/30171576 DC : DRAFT APR 2008 | BS ISO 27667 - ROAD VEHICLES - BRAKE LINING FRICTION MATERIALS - EVALUATION OF CORROSION EFFECTS ON PAINTED BACKING PLATES AND BRAKE SHOES |
| 07/30171995 DC : 0 | BS ISO 15726 - ELECTRODEPOSITED COATINGS AND RELATED FINISHES - ELECTROPLATED ZINC ALLOYS WITH NICKEL, COBALT OR IRON |
| 07/30163202 DC : 0 | BS ISO 12151-3 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| I.S. EN ISO 12944-6:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018) |
| BS ISO 21207:2015 | Corrosion tests in artificial atmospheres. Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying |
| BS EN 61537:2007 | Cable management. Cable tray systems and cable ladder systems |
| 06/30155635 DC : 0 | EN 13261 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| BS ISO 26945 : 2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF TIN-COBALT ALLOY |
| DIN EN ISO 14713-1 E : 2010 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
| 16/30337293 DC : 0 | BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
| 01/713262 DC : DRAFT SEP 2001 | PREN 14268 - IRRIGATION TECHNIQUES - METRES FOR IRRIGATION WATER |
| UNE-EN ISO 10862:2010 | Small craft - Quick release system for trapeze harness (ISO 10862:2009) |
| Z259.2.2-17 | Self-retracting devices |
| CSA ISO/IEC 10373-1 : 2007 : R2012 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| 03/115371 DC : DRAFT SEP 2003 | EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOF COVERINGS AND WALL FINISHES |
| 15/30253325 DC : 0 | BS ISO 17519 - GAS CYLINDERS - REFILLABLE PERMANENTLY MOUNTED COMPOSITE TUBES FOR TRANSPORTATION |
| CSA ISO/IEC 10373-1 : 2007 : INC : AMD 1 : 2014 : R201200 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| I.S. EN 62444:2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD)) |
| 02/106220 DC : 0 | BS EN 14566 - MECHANICAL FASTENERS FOR PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN ISO 4521:2008 | Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods |
| BS ISO 16380 : 2014 | ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
| DIN EN 15807:2011-05 | Railway applications - Pneumatic half couplings |
| DIN EN 14506 E : 2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AUTOMATIC DIVERTER - FAMILY H, TYPE C |
| PREN 14783 : DRAFT 2012 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| Z259.15-17 | Anchorage connectors |
| I.S. EN ISO 2081:2018 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2081:2018) |
| PREN 2535 : 200P1 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| PREN 2437 : DRAFT 98 CORR 99 | AEROSPACE SERIES - CHROMATE CONVERSION COATINGS (YELLOW) FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| PREN 2516 : 1996 | PASSIVATION OF CORROSION RESISTANT STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| DIN EN 71-14 E : 2017 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| ISO 10333-4:2002 | Personal fall-arrest systems — Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester |
| ASTM B 912 : 2002 : R2008 : EDT 1 | Standard Specification for Passivation of Stainless Steels Using Electropolishing |
| ISO 27667:2011 | Road vehicles — Brake lining friction materials — Evaluation of corrosion effects on painted backing plates and brake shoes |
| PREN 4704 : 200P1 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| UNI EN 15496 : 2008 | CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| PREN 4603 : 200P1 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE COATINGS OF FASTENERS - TECHNICAL SPECIFICATION |
| ISO 6742-5:2015 | Cycles — Lighting and retro-reflective devices — Part 5: Lighting systems not powered by the cycle's movement |
| BIS IS 15957 : 2012 | ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) SPECIFIC EQUIPMENT - GENERAL DESIGN REQUIREMENTS, PERFORMANCE AND TEST METHODS |
| BS ISO 8434-3:2005 | Metallic tube connections for fluid power and general use O-ring face seal connectors |
| I.S. EN 4704:2012 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| I.S. EN 10223-8:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| I.S. EN 62271-202:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION |
| PREN 13659 : DRAFT 2014 | SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 15288-1:2008 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| BS ISO 12151-1 : 2010 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| BS ISO 12619-2 : 2014 | ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| ISO 21207:2015 | Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying |
| ISO 9139:1998 | Aerospace — Nuts, plain or slotted (castellated) — Procurement specification |
| ISO 22778:2006 | Metallic coatings — Physical vapour-deposited coatings of cadmium on iron and steel — Specification and test methods |
| EN ISO/IEC 10373 : 1995 | IDENTIFICATION CARDS - TEST METHODS |
| ISO/TR 16335:2013 | Corrosion of metals and alloys Corrosion tests in artificial atmospheres Guidelines for selection of accelerated corrosion test for product qualification |
| I.S. EN 15220-1:2008 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| EN 3833:2004 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification |
| UNE-EN ISO 6149-4:2017 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) |
| I.S. EN 14506:2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - AUTOMATIC DIVERTER - FAMILY H, TYPE C |
| DIN EN 13071-1:2008-10 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| EN 358:1999 | Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards |
| UNE-EN ISO 4521:2010 | Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008) |
| BS EN 3833:2004 | Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification: 1550 MPa (at ambient temperature) / 650°C. Technical specification |
| NF EN ISO 7599 : 2011 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM |
| ISO 17398:2004 | Safety colours and safety signs — Classification, performance and durability of safety signs |
| UNI ISO 8434-2 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS |
| UNI EN ISO 11130 : 2010 | CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| EN 13565-1:2003+A1:2007 | Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components |
| PREN 17001 : DRAFT 2016 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - COATING SPECIFICATION |
| EN ISO 6149-4:2017 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017) |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN ISO 8434-1:2007 | Metallic tube connections for fluid power and general use 24 degree cone connectors |
| I.S. EN 62275:2015 | CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| I.S. EN 14353:2017 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| NF EN ISO 5912 : 2011 | CAMPING TENTS |
| NF EN 12206-1 : 2011 | PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER |
| DIN EN 1866-1:2007-10 | Mobile fire extinguishers - Part 1: Characteristics, performance and test methods |
| DIN EN 13200-4:2006-12 | Spectator facilities - Part 4: Seats - Product characteristics |
| DIN EN 1359:2007-06 | GAS METERS - DIAPHRAGM GAS METERS |
| DIN EN 12864:2006-03 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| DIN EN 12899-3:2008-02 | Fixed vertical road traffic signs - Part 3: Delineator posts and retroreflectors |
| DIN EN 12182:2012-07 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN 12487:2007-07 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| DIN EN 1497:2007-10 | Personal fall protection equipment - Rescue harnesses |
| DIN EN 1442:2008-04 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| DIN EN 15434 E : 2010 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| DIN EN 1498:2007-01 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LOOPS |
| DIN EN 13438:2013-12 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| DIN EN 15132 E : 2006 | CONTAINER SHELLS FOR MOBILE WASTE CONTAINERS WITH A CAPACITY UP TO 1700 L - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN 14427:2014-09 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| DIN EN 15266:2007-08 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| DIN EN 14268:2005-11 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| DIN EN 14601:2011-01 | Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe (includes Amendment A1:2010) |
| DIN EN 14566:2009-10 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNE-EN 1496:2018 | Personal fall protection equipment - Rescue lifting devices |
| DIN EN 14782:2015-09 (Draft) | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| DIN EN 505:2013-06 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| DIN EN 14267:2004-10 | IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS |
| BS EN 12540:2000 | Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium |
| BS EN 14195:2014 | Metal framing components for gypsum board systems. Definitions, requirements and test methods |
| BS EN ISO 17872:2007 | Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| BS EN ISO 4527:2003 | Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods |
| ISO 8092-2:2005 | Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements |
| UNE-EN 1096-2:2012 | Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings |
| 04/30124785 DC : 0 | EN 15069 - SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| BS EN 12329:2000 | Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
| BS EN 248:2002 | Sanitary tapware. General specification for electrodeposited coatings of Ni-Cr |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| BS EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements |
| UNE-EN ISO 16773-2:2017 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016) |
| ISO 2080:2008 | Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary |
| ISO 21227-3:2007 | Paints and varnishes Evaluation of defects on coated surfaces using optical imaging Part 3: Evaluation of delamination and corrosion around a scribe |
| BS EN 12729:2002 | Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A |
| BS EN ISO 12402-9 : 2006 | PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
| BS EN ISO 11997-2:2013 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity/UV light |
| ISO 8936:2017 | Awnings for leisure accommodation vehicles — Requirements and test methods |
| UNE-EN 12966-1:2006 | Road vertical signs - Variable message traffic signs - Part 1: Product standard |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| I.S. EN 813:2008 | PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES |
| DIN EN 12864 E : 2006 AMD 3 2010 | LOW PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| I.S. EN 671-2:2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE |
| UNI EN ISO 12402-9 : 2011 | PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
| DIN EN 1866:1998-11 | MOBILE FIRE EXTINGUISHERS |
| DIN EN 12329:2000-09 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON AND STEEL |
| I.S. EN 10223-3:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| EN 15807:2011 | Railway applications - Pneumatic half couplings |
| I.S. EN 13659:2015 | SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN ISO 4611:2010 | PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| I.S. EN ISO 15027-1:2012 | IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-1:2012) |
| DIN EN 12540:2000-07 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM |
| EN 508-1:2014 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| DIN EN 12206-1:2004-09 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| I.S. EN 341:2011 | PERSONAL FALL PROTECTION EQUIPMENT - DESCENDER DEVICES FOR RESCUE |
| I.S. EN 362:2005 | PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - CONNECTORS |
| I.S. EN 13523-8:2017 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| ONORM EN 13261 : 2012 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| I.S. EN 12182:2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 1096-2:2012 | GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS |
| IEC 60068-2-52:2017 RLV | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| I.S. EN 505:2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| I.S. EN 331:2015 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 2133:2010 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| I.S. EN 14783:2013 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| DIN EN ISO 12402-9:2006-12 | Personal flotation devices - Part 9: Test methods (ISO 12402-9:2006) |
| I.S. EN 14601:2005 | RAILWAY APPLICATIONS - STRAIGHT AND ANGLED END COCKS FOR BRAKE PIPE AND MAIN RESERVOIR PIPE |
| I.S. EN ISO 15027-2:2012 | IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-2:2012) |
| I.S. EN 3-7:2004 | PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN 12330:2000-09 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM IRON OR STEEL |
| DIN ISO 8936:2003-06 | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11997-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
| DIN EN 1036-2:2008-05 | GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY - PRODUCT STANDARD |
| I.S. EN 12487:2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 14140:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| UNI EN 2133 : 2011 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| I.S. EN 1442:2017 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 13146-6:2012 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS |
| I.S. EN ISO 8092-2:2006 | ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 2: DEFINITIONS, TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS |
| I.S. EN ISO 4623-2:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES (ISO 4623-2:2016) |
| I.S. EN 1359:2017 | GAS METERS - DIAPHRAGM GAS METERS |
| I.S. EN ISO 10308:2006 | METALLIC COATINGS - REVIEW OF POROSITY TESTS |
| I.S. EN 1497:2007 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES |
| I.S. EN 508-1:2014 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| I.S. EN 1498:2006 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LOOPS |
| I.S. EN 13438:2013 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| DIN EN 14344:2004-11 | Child use and care articles - Child seats for cycles - Safety requirements and test methods |
| I.S. EN ISO 16773-2:2016 | ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED METALLIC SPECIMENS - PART 2: COLLECTION OF DATA (ISO 16773-2:2016) |
| I.S. EN 14195:2014 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 1036-1:2008-03 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods |
| I.S. EN 13434:2006 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G, TYPE B |
| I.S. EN ISO 3613:2010 | METALLIC AND OTHER INORGANIC COATINGS - CHROMATE CONVERSION COATINGS ON ZINC, CADMIUM, ALUMINIUM-ZINC ALLOYS AND ZINC-ALUMINIUM ALLOYS - TEST METHODS |
| DIN EN ISO 11439:2013-09 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
| DIN EN 13760:2003-11 | Automotive LPG filling system for light and heavy duty vehicles - Nozzle; Test requirements and dimensions |
| I.S. EN 13120:2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 671-1:2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE |
| I.S. EN 354:2010 | PERSONAL FALL PROTECTION EQUIPMENT - LANYARDS |
| I.S. EN 1670:2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14427:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 13802:2013 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| I.S. EN 14566:2008 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 1496:2017 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| DIN EN 13071:2002-05 | SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FOR 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE |
| I.S. EN 13433:2006 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G, TYPE A |
| IEC 61914:2015 | Cable cleats for electrical installations |
| UNI EN ISO 12402-7 : 2011 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 13561:2015 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 795:2012 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
| I.S. EN ISO 4628-8:2012 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
| I.S. EN 13858:2006 | CORROSION PROTECTION OF METALS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS ON IRON OR STEEL COMPONENTS |
| I.S. EN 1375:2002 | IDENTIFICATION CARD SYSTEM - INTERSECTOR INTEGRATED CIRCUIT(S) CARD ADDITIONAL FORMATS - ID-000 CARD SIZE AND PHYSICAL CHARACTERISTICS |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| I.S. EN 15434:2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| I.S. EN ISO 11439:2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013) |
| DIN EN 16927:2017-05 | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| I.S. EN 12806:2003 | AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
| VDI 3823 Blatt 4:2006-11 | Vacuum coating quality assurance - Testing of vacuum coated plastics |
| NF EN 12806 : 2003 | AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
| UNE-EN ISO 15730:2016 | Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2000) |
| BS EN 15807:2011 | Railway applications. Pneumatic half couplings |
| 09/30214454 DC : 0 | BS EN 2576 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C TECHNICAL SPECIFICATION |
| ISO/TR 12155:1994 | Commercial vehicles Obstacle detection device during reversing Requirements and tests |
| DIN 67510-4:2008-02 | PHOSPHORESCENT PIGMENTS AND PRODUCTS - PART 4: PRODUCTS FOR PHOSPHORESCENT ESCAPE ROUTE SYSTEMS - MARKINGS AND APPLICATIONS |
| 09/30205086 DC : 0 | BS EN 13146-6 - RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS |
| 03/115104 DC : DRAFT OCT 2003 | ISO 16151 - CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, DRY AND WET CONDITIONS |
| ISO 14960-2:2014 | Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tyre valve-test method |
| 15/30327073 DC : 0 | BS ISO 15500-2 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| BS EN 15714-4:2009 | Industrial valves. Actuators Hydraulic part-turn actuators for industrial valves. Basic requirements |
| 03/319909 DC : DRAFT NOV 2003 | BS EN 14817 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR-SPRING CONTROL ELEMENTS |
| 97/541504 DC : DRAFT MAY 97 | EN 12841 - PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTION OF FALLS FROM A HEIGHT - WORK POSITIONING SYSTEMS - ROPE ADJUSTMENT DEVICES |
| DIN EN 10169:2012-06 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
| 05/30135337 DC : DRAFT JUN 2005 | EN 15266 - STAINLESS STEEL PLIABLE CORRUGATED TUBING SYSTEMS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR |
| ISO 4038:1996 | Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings |
| 16/30340560 DC : 0 | BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| 12/30264367 DC : 0 | BS EN 505 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| I.S. EN ISO 9142:2004 | ADHESIVES - GUIDE TO THE SELECTION OF STANDARD LABORATORY AGEING CONDITIONS FOR TESTING BONDED JOINTS |
| 15/30291917 DC : 0 | BS ISO 14469 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) REFUELLING CONNECTOR - PART: 20 MPA (200 BAR) CONNECTOR |
| 10/30206257 DC : 0 | BS EN ISO 4611 - PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST |
| PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| BS EN ISO 19598:2016 | Metallic coatings. Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment |
| BS ISO 9154:2016 | Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| BS ISO 11999-3:2015 | PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Clothing |
| ISO 15584:2001 | Small craft Inboard petrol engines Engine-mounted fuel and electrical components |
| UNI EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| 16/30329239 DC : 0 | BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| 14/30259899 DC : 0 | BS ISO 6742-5 - CYCLES - LIGHTING AND RETRO-REFLECTIVE DEVICES - PART 5: LIGHTING SYSTEMS NOT POWERED BY THE CYCLE'S MOVEMENT |
| 01/562883 DC : DRAFT JUL 2001 | BS EN 14225-4 - DIVING SUITS - PART 4: ONE ATMOSPHERE DIVING SUIT - HUMAN FACTORS REQUIREMENTS AND TEST METHODS |
| AEP-64 : 2012 | PERFORMANCE REQUIREMENTS FOR PAINT SYSTEMS RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT |
| BS ISO 6742-5:2015 | Cycles. Lighting and retro-reflective devices Lighting systems not powered by the cycle’s movement |
| 18/30347939 DC : DRAFT APR 2018 | BS ISO 20766-6 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 6: PRESSURE RELIEF VALVES (PRV) |
| 99/100668 DC : DRAFT JAN 1999 | PREN 13434 - DISCONNECTOR HYDRAULIC ACTUATED FAMILY G TYPE B - CHARACTERISTICS AND TESTS |
| 14/30304116 DC : 0 | BS EN 1359 - GAS METERS - DIAPHRAGM GAS METERS |
| 12/30264370 DC : 0 | BS EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| 08/30178971 DC : DRAFT FEB 2008 | BS ISO 1456 - METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM AND OF COPPER PLUS NICKEL PLUS CHROMIUM |
| 17/30361654 DC : 0 | BS EN 2583 - AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION |
| BS EN ISO 11997-1:2017 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humid |
| 05/30128683 DC : DRAFT FEB 2005 | ISO 5857 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION |
| BS ISO 12140:2013 | Agricultural machinery. Agricultural trailers and trailed equipment. Drawbar jacks |
| 17/30364786 DC : 0 | BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 1036:1999 | GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE |
| BS EN 1036-1:2007 | Glass in building. Mirrors from silver-coated float glass for internal use Definitions, requirements and test methods |
| UNI ISO 12151-3 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| PREN 14782 : DRAFT 2015 | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| 11/30253944 DC : 0 | BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| BS ISO 9974-4:2006 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| BS ISO 9717 : 2010 | METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS |
| DIN EN 1090-5 E : 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| BS ISO 2919 : 2012 | RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
| 06/30125306 DC : 0 | EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS |
| 13/30279156 DC : 0 | BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| BS EN ISO 26945:2011 | Metallic and other inorganic coatings. Electrodeposited coatings of tin-cobalt alloy |
| 14/30293497 DC : 0 | BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| BS ISO 6742-4:2015 | Cycles. Lighting and retro-reflective devices Lighting systems powered by the cycle’s movement |
| UNE-EN ISO 17268:2017 | Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2012) |
| UNE-EN 61914:2016 | Cable cleats for electrical installations |
| DIN EN 16582-1 E : 2015 | DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| BS ISO 22778:2006 | Metallic coatings. Physical vapour-deposited coatings of cadmium on iron and steel. Specification and test methods |
| PD ISO/TS 16688:2017 | Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications |
| BS ISO 18869:2017 | Hydraulic fluid power. Test methods for couplings actuated with or without tools |
| DIN EN ISO 15730 E : 2016 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPOLISHING AS A MEANS OF SMOOTHING AND PASSIVATING STAINLESS STEEL (ISO 15730:2000) |
| 16/30329243 DC : 0 | BS EN ISO 2082 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| I.S. EN ISO 10862:2009 | SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS |
| ISO 3160-2:2015 | Watch-cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness, corrosion resistance and adhesion |
| I.S. EN 15714-4:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 98/711668 DC : DRAFT AUG 98 | PREN 10301 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - INTERNAL COATING FOR THE REDUCTION OF FRICTION FOR CONVEYANCE OF NON CORROSIVE GAS |
| BS ISO 28340:2013 | Combined coatings on aluminium. General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium |
| 12/30250634 DC : 0 | BS EN 13802 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| 15/30320603 DC : 0 | BS EN 60068-2-52 - ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM, CHLORIDE SOLUTION) |
| 07/30161334 DC : 0 | BS EN 15644 - TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 04/30124417 DC : DRAFT OCT 2004 | EN 15081 - INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT |
| 14/30214363 DC : 0 | BS EN 15220 - RAILWAY APPLICATIONS - BRAKE INDICATORS |
| 05/30090970 DC : 0 | EN 15220-1 - RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATIC OPERATION BRAKE INDICATORS |
| BS ISO 23269-2:2011 | Ships and marine technology. Breathing apparatus for ships Self-contained breathing apparatus for shipboard firefighters |
| BS 7796:1995 | Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series |
| DIN EN 15096:2008-04 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| 15/30322588 DC : 0 | BS EN ISO 12402-9 - PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
| 07/30163197 DC : 0 | BS ISO 12151-1 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| BS A 302:1992 | Self-locking nuts with maximum operating temperature less than or equal to 425°C. Procurement specification |
| BS ISO 16701 : 2003 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION |
| 06/30149450 DC : DRAFT APR 2006 | EN 1866-1 - MOBILE FIRE EXTINGUISHERS - PART 1: CHARACTERISTICS, PERFORMANCE AND TEST METHODS |
| 12/30248681 DC : 0 | BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| I.S. EN 71-14:2014 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| BS EN 15714-2:2009 | Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements |
| 06/30133250 DC : 0 | BS EN 13071-1 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| 07/30167371 DC : 0 | BS ISO 2080 - METALLIC AND OTHER INORGANIC COATINGS - SURFACE TREATMENT, METALLIC AND OTHER INORGANIC COATINGS - VOCABULARY |
| 09/30196113 DC : DRAFT JULY 2009 | BS ISO 9717 - METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS |
| UNE-EN 16129:2014 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| DIN EN 15220-1:2011-07 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| UNI ISO 8434-6 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| 06/30154256 DC : DRAFT AUG 2006 | ISO 9650-3 - SMALL CRAFT - INFLATABLE LIFERAFTS - PART 3: MATERIALS |
| BS EN 15646:2009 | Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods |
| 00/563156 DC : DRAFT JULY 2000 | PREN ISO 12402-9 - PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS FOR CLASSES A TO F |
| ISO 12944-9:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures |
| ASTM B 912 : 2002 : R2013 | Standard Specification for Passivation of Stainless Steels Using Electropolishing |
| PREN 12966 : DRAFT 2013 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| UNI EN 15220-1 : 2011 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| UNI EN 15646 : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| 03/317245 DC : DRAFT OCT 2003 | ISO 22778 - METALLIC COATINGS - VAPOUR DEPOSITED COATINGS OF CADMIUM ON IRON AND STEEL - SPECIFICATION AND TEST METHODS |
| I.S. EN 12966:2014 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| IEEE 1591.1-2012 | IEEE Standard for Testing and Performance of Hardware for Optical Ground Wire (OPGW) |
| BS ISO 12151-3:2010 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| Z259.2.5-17 | Fall arresters and vertical lifelines |
| BS ISO 2080 : 2008 | METALLIC AND OTHER INORGANIC COATINGS - SURFACE TREATMENT, METALLIC AND OTHER INORGANIC COATINGS - VOCABULARY |
| UNI EN ISO 10683 : 2014 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| UNE-EN 15220:2017 | Railway applications - Brake indicators |
| NF ISO 9650-3 : 2009 | SMALL CRAFT - INFLATABLE LIFERAFTS - PART 3: MATERIALS |
| ISO 6149-4:2017 | Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| C22.2 NO. 18.3-12 (R2017) | Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B) |
| ISO 4091:2003 | Road vehicles Connectors for the electrical connection of towing and towed vehicles Definitions, tests and requirements |
| CSA C22.2 No. 18.3 : 2012 | CONDUIT, TUBING, AND CABLE FITTINGS |
| UNI EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| UNE-EN 15807:2011 | Railway applications - Pneumatic half couplings |
| ISO 7076-3:2016 | Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment |
| ISO 2081:2018 | Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel |
| UNE-EN ISO 7599:2011 | Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium (ISO 7599:2010) |
| UNE-EN 71-14:2015 | Safety of toys - Part 14: Trampolines for domestic use |
| I.S. EN ISO 4521:2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| I.S. EN 4827:2017 | AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 4691-1:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| ISO 10074:2017 | Anodizing of aluminium and its alloys Specification for hard anodic oxidation coatings on aluminium and its alloys |
| CEI EN 62275 : 2016 | CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| I.S. EN 3833:2005 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION |
| NFL 10-201 : 1998 | AEROSPACE SERIES - LUBRICATING DRY FLUOROCARBONATED COATING WITH BINDING MATERIAL AND FILLERS, OF A MINIMUM THICKNESS OF 5 MM ON METALLIC SUBSTRATE - QUALITY OF COATED PARTS |
| I.S. EN 16582-1:2015 | DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| ISO 9974-4:2016 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| NF EN 61914 : 2016 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| I.S. EN 4826:2014 | AEROSPACE SERIES - ZINC-NICKEL (12%-16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER ALLOYS, NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS |
| ISO 13486-1:1999 | Road vehicles Hydraulic braking systems Part 1: Double-flare pipes, tapped holes, male fittings and tube seats |
| I.S. EN 14428:2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| UNE-EN ISO 2919:2015 | Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) |
| I.S. EN 61537:2007 | CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS |
| ISO 14469:2017 | Road vehicles Compressed natural gas (CNG) refuelling connector |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| ISO 6856:2005 | Road vehicles Unscreened high-voltage ignition cable assemblies Test methods and general requirements |
| BS EN 358:2000 | Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards |
| EN ISO 10683:2014 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| UNI EN 15288-1 : 2010 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| ISO 17966:2016 | Assistive products for personal hygiene that support users Requirements and test methods |
| EN ISO 16151:2008 | Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, 'dry' and 'wet' conditions (ISO 16151:2005) |
| ISO 1458:2002 | Metallic coatings Electrodeposited coatings of nickel |
| I.S. EN IEC 60068-2-52:2018 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION) |
| I.S. EN 15220:2016 | RAILWAY APPLICATIONS - BRAKE INDICATORS |
| ISO/IEC 18745-1:2014 | Information technology Test methods for machine readable travel documents (MRTD) and associated devices Part 1: Physical test methods for passport books (durability) |
| PREN 505 : DRAFT 2012 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| PREN 16602-70-14 : DRAFT 2016 | SPACE PRODUCT ASSURANCE - CORROSION |
| EN 2583:1997 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650°C - Technical specification |
| DIN EN ISO 4042:2001-01 | FASTENERS - ELECTROPLATED COATINGS |
| PREN 17125 : DRAFT 2017 | DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 8434-1 : 2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| I.S. EN ISO 12944-9:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018) |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| ISO 15170-2:2001 | Road vehicles — Four-pole electrical connectors with pins and twist lock — Part 2: Tests and requirements |
| BS EN 13071-1:2008 | Stationary waste containers up to 5000 l, top lifted and bottom emptied General requirements |
| UNE-EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| I.S. EN ISO 16701:2015 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO 16701:2015) |
| UNE-EN 15220-1:2009 | Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators |
| FM 4411 : 2016 | CAVITY WALLS AND RAINSCREENS |
| UNE-EN 14428:2016 | Shower enclosures - Functional requirements and test methods |
| UNI EN ISO 2919 : 2015 | RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
| PREN 1359 : DRAFT 2014 | GAS METERS - DIAPHRAGM GAS METERS |
| CSA Z259.2.4 : 2015 | FALL ARRESTERS AND VERTICAL RIGID RAILS |
| EN ISO 7599:2018 | Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018) |
| ISO 11999-3:2015 | PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 3: Clothing |
| ISO 17745:2016 | Steel wire ring net panels Definitions and specifications |
| DIN EN 13565-1:2016-08 (Draft) | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| ISO 15741:2016 | Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| UNE-EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| ISO 12151-6:2009 | Connections for hydraulic fluid power and general use Hose fittings Part 6: Hose fittings with ISO 8434-6 60 degree cone ends |
| ISO 12991:2012 | Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles |
| ISO 12151-4:2007 | Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends |
| BS EN 62275:2015 | Cable management systems. Cable ties for electrical installations |
| ISO 9650-3:2009 | Small craft — Inflatable liferafts — Part 3: Materials |
| DIN EN ISO 10683:2016-07 (Draft) | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| DIN EN 13146-6:2012-06 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS |
| EN 71-14 : 2014 COR 2017 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems Specification |
| UNI EN ISO 7599 : 2010 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM |
| ISO 8434-6:2009 | Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring |
| EN ISO 12944-6:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) |
| EN 62275:2015 | Cable management systems - Cable ties for electrical installations |
| I.S. EN 15096:2008 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 2583:1997 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION |
| DIN EN 14451:2005-08 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
| IEC 60309-5:2017 | Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC) |
| I.S. EN 15644:2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| I.S. EN ISO 15584:2017 | SMALL CRAFT - INBOARD PETROL ENGINES - ENGINE-MOUNTED FUEL AND ELECTRICAL COMPONENTS (ISO 15584:2001) |
| DIN EN 1929-2:2005-03 | Basket trolleys - Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors; German version EN 1929-2:2004 |
| DIN EN 13120:2014-09 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 1496:2015-07 (Draft) | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| DIN EN 15496 E : 2008 | CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| DIN EN 12841:2006-11 | Personal fall protection equipment - Rope access systems - Rope adjustment devices |
| DIN EN 2583:1997-03 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY, NI-PH 2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| DIN EN ISO 4628-8:2013-03 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
| DIN EN 2516:1997-05 | AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTANT STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| DIN EN ISO 11997-2:2013-12 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
| DIN EN 2289:1996-10 | AEROSPACE SERIES - ROD BODIES IN ALUMINIUM ALLOY FOR FLIGHT CONTROLS - TECHNICAL SPECIFICATION |
| DIN EN 1096-2:2012-04 | Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings |
| DIN EN 14800 E : 2007 | CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS |
| DIN EN 795:2012-10 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
| DIN EN 508-1:2014-08 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| DIN EN 813:2008-11 | PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES |
| DIN EN 362:2008-09 | PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - CONNECTORS |
| DIN EN ISO 21227-3:2007-07 | Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007) |
| DIN EN 14601 E : 2011 | RAILWAY APPLICATIONS - STRAIGHT AND ANGLED END COCKS FOR BRAKE PIPE AND MAIN RESERVOIR PIPE |
| DIN EN 14452 E : 2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - PIPE INTERRUPTER WITH ATMOSPHERIC VENT AND MOVING ELEMENT DN 10 TO DN 20 - FAMILY D, TYPE B |
| DIN EN 331:2016-04 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| DIN EN 15081 E : 2008 | INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT |
| DIN EN 13786:2010-07 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| DIN EN 13785:2010-05 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| DIN EN 14782 E : 2006 | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| DIN EN 14140:2015-03 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| DIN EN 14451 E : 2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
| DIN EN 14454 E : 2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION BACKFLOW PREVENTER DN 15 TO DN 32 - FAMILY H, TYPE A |
| DIN EN 354:2010-11 | Personal fall protection equipment - Lanyards |
| DIN EN 14566 E : 2009 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 14783 E : 2013 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| UNE-EN ISO 15027-1:2013 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| DIN EN 15132:2006-12 | Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods |
| UNE-EN 62271-202:2015 | High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation |
| BS EN 4826:2014 | Aerospace series. Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners |
| BS EN 14451:2005 | Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A |
| BS EN 2437:2002 | Aerospace series. Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| UNE-EN ISO 4628-8:2013 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
| BS EN 12676-2:2000 | Anti-glare systems for roads Test methods |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| ISO 16701:2015 | Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| ISO 26945:2011 | Metallic and other inorganic coatings Electrodeposited coatings of tin-cobalt alloy |
| BS EN 795:2012 | Personal fall protection equipment. Anchor devices |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| BS EN ISO 5912:2011 | Camping tents |
| BS EN 1866:2005 | Mobile fire extinguishers |
| BS EN 14817:2006 | Railway applications. Suspension components. Air-spring control elements |
| ISO 5912:2011 | Camping tents |
| ISO 8434-4:1995 | Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples |
| UNE-EN 671-1:2013 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| UNE-EN 10223-3:2014 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| I.S. EN ISO 12402-7:2006 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 15096:2008 | Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification |
| EN 14451:2005 | Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A |
| ONORM EN ISO 5912 : 2013 | CAMPING TENTS (ISO 5912:2011) |
| UNE-EN 62275:2016 | Cable management systems - Cable ties for electrical installations |
| UNI EN 13261 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| I.S. EN 14451:2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
| I.S. EN ISO 12402-9:2006 | PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
| EN ISO 12402-9:2006/A1:2011 | PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
| EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
| ONORM EN 14451 : 2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - IN-LINE ANTI-VACUUM VALVES DN 8 TO DN 80 - FAMILY D, TYPE A |
| UNE-EN 16207:2015 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| EN 15288-1:2008+A1:2010 | Swimming pools - Part 1: Safety requirements for design |
| DIN EN 14427 E : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| CSA C22.2 42.1 : 2013 | COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
| EN ISO 12402-7:2006/A1:2011 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 1496:2017 | Personal fall protection equipment - Rescue lifting devices |
| EN 1866-1:2007 | Mobile fire extinguishers - Part 1: Characteristics, performance and test methods |
| EN ISO 4521 : 2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| EN 813:2008 | Personal fall protection equipment - Sit harnesses |
| EN 362:2004 | Personal protective equipment against falls from a height - Connectors |
| EN 396:1993/A1:1998 | LIFEJACKETS AND PERSONAL BUOYANCY AIDS - LIFEJACKETS - 150 N |
| EN 248:2002 | Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr |
| EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
| EN ISO 4623-2:2016 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016) |
| EN ISO 4527 : 2003 | METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS - SPECIFICATION AND TEST METHODS (ISO 4527:2003) |
| UNI EN 12487 : 2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| UNI EN ISO 15027-1 : 2012 | IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
| UNI EN 15434 : 2010 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| UNI EN 10223-8 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| UNI EN 14783 : 2013 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| UNI EN ISO 1456 : 2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND OF COPPER PLUS NICKEL PLUS CHROMIUM |
| UNI EN ISO 4611 : 2011 | PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST |
| UNI EN 505 : 2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| UNI EN 4473 : 2010 | AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS FOR FASTENERS - TECHNICAL SPECIFICATION |
| UNI EN 671-1 : 2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE |
| UNI EN 813 : 2008 | PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES |
| ONORM EN 2535 : 2011 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| UNI EN 12899-3 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 3: DELINEATOR POSTS AND RETROREFLECTORS |
| UNI EN 14268 : 2006 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| UNI EN ISO 11997-2 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
| UNI EN 14427 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| UNI EN ISO 4628-8 : 2013 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT |
| UNI EN 13802 : 2014 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| UNI EN 10223-7 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| UNI EN 13120 : 2014 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN ISO 15027-2 : 2012 | IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
| UNI EN 14800 : 2007 | CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION DOMESTIC APPLIANCES USING GASEOUS FUELS |
| EN ISO 4611:2010 | Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010) |
| UNI EN 341 : 2011 | PERSONAL FALL PROTECTION EQUIPMENT - DESCENDER DEVICES FOR RESCUE |
| UNI EN 15069 : 2009 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| UNI EN 14566 : 2009 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 1497 : 2008 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES |
| UNI EN 13146-6 : 2012 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS |
| UNI EN 13438 : 2013 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| UNI EN 354 : 2010 | PERSONAL FALL PROTECTION EQUIPMENT - LANYARDS |
| UNI EN 671-2 : 2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE |
| UNI EN 1096-2 : 2012 | GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS |
| EN ISO 4628-8:2012 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
| UNI EN 14140 : 2015 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| UNI EN 12864 : 2010 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| UNI EN 12182 : 2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN 1670 : 2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| UNI EN 13786 : 2009 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| UNI EN 10223-3 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| UNI EN 13785 : 2009 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| ONORM EN 14427 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| IEC 60068-2-52 REDLINE : 3ED 2017 | |
| SAE J 531 : 2015 | AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS |
| I.S. EN 15807:2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| 13/30288815 DC : 0 | BS EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| BS EN ISO 10862:2009 | Small craft. Quick release system for trapeze harness |
| ISO 12140:2013 | Agricultural machinery Agricultural trailers and trailed equipment Drawbar jacks |
| UNI EN 16129 : 2013 | PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| BS ISO 14878:2015 | Cycles. Audible warning devices. Technical specification and test methods |
| ISO 15726:2009 | Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron |
| PD ISO/TR 16335:2013 | Corrosion of metals and alloys. Corrosion tests in artificial atmospheres. Guidelines for selection of accelerated corrosion test for product qualification |
| DIN EN ISO-IEC 10373 : 1995 | IDENTIFICATION CARDS; TEST METHODS |
| 17/30286850 DC : DRAFT SEP 2017 | BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION |
| BS ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems. Specification |
| ISO 17746:2016 | Steel wire rope net panels and rolls Definitions and specifications |
| 93/710335 DC : DRAFT 93 | ISO 8092 ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 2: TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS |
| PREN 13802 : DRAFT 2012 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| BS ISO 16539:2013 | Corrosion of metals and alloys. Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process. \'Dry\' and \'wet\' conditions at constant absolute humidity |
| DIN EN ISO 13129:2013-04 | PAINTS AND VARNISHES - ELECTROCHEMICAL MEASUREMENT OF THE PROTECTION PROVIDED TO STEEL BY PAINT COATINGS - CURRENT INTERRUPTER (CI) TECHNIQUE, RELAXATION VOLTAMETRY (RV) TECHNIQUE AND DC TRANSIENT (DCT) MEASUREMENTS (ISO 13129:2012) |
| I.S. EN ISO 2082:2017 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2082:2017) |
| EN 4691-1:2017 | Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification |
| BS ISO 15730 : 2000 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPOLISHING AS A MEANS OF SMOOTHING AND PASSIVATING STAINLESS STEEL |
| 06/30135398 DC : 0 | EN 15496 - CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| 07/30166912 DC : DRAFT AUG 2007 | BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| I.S. EN 13071:2002 | SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE |
| 11/30244798 DC : 0 | BS EN 1096-2 - GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS |
| 02/102266 DC : DRAFT MAR 2002 | PREN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| 17/30333721 DC : 0 | BS EN ISO 7599 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
| DIN EN ISO 8936:2015-09 (Draft) | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
| PREN 13438 : DRAFT 2012 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| DIN EN 14353:2016-02 (Draft) | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 15714-2:2009 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| I.S. EN 12476:2000 | PHOSPHATE CONVERSION COATINGS OF METALS - METHOD OF SPECIFYING REQUIREMENTS |
| ISO/PAS 11154:2006 | Road vehicles — Roof load carriers |
| BS EN ISO 22068:2014 | Sintered-metal injection-moulded materials. Specifications |
| I.S. EN ISO 8434-4:2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| UNI EN ISO 12401 : 2009 | SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS |
| ONORM EN ISO 16151 : 2008 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS |
| 11/30241851 DC : 0 | BS EN 13659 - SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| BS ISO 7583:2013 | Anodizing of aluminium and its alloys. Terms and definitions |
| BS EN ISO 13129:2012 | Paints and varnishes. Electrochemical measurement of the protection provided to steel by paint coatings. Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements |
| UNI EN ISO 26945 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF TIN-COBALT ALLOY |
| 10/30196548 DC : 0 | BS EN ISO 15027-1 - IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
| 17/30347930 DC : 0 | BS ISO 20766-3 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 3: 80% STOP VALVE |
| 13/30284277 DC : 0 | BS ISO 14960-2 - TUBELESS TYRES - VALVES AND COMPONENTS - PART 2: CLAMP-IN TUBELESS TIRE VALVE-TEST METHOD |
| BS EN 61914:2016 | Cable cleats for electrical installations |
| 14/30259896 DC : 0 | BS ISO 6742-4 - CYCLES - LIGHTING AND RETRO-REFLECTIVE DEVICES - PART 4: LIGHTING SYSTEMS POWERED BY THE CYCLE'S MOVEMENT |
| BS ISO 15171-1:1999 | Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling not for connection under pressure |
| BS ISO 14469-3:2006 | Road vehicles. Compressed natural gas (CNG) refuelling connector 25 MPa (250 bar) connector |
| 13/30236754 DC : 0 | BS ISO 16380 - ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
| 17/30320673 DC : 0 | BS EN ISO 17268 - GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES |
| 14/30288142 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 16151:2008 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, ''DRY'' AND ''WET'' CONDITIONS |
| 12/30257615 DC : 0 | BS ISO 7583 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - TERMS AND DEFINITIONS |
| BS EN ISO 14713-1:2017 | Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures General principles of design and corrosion resistance |
| 13/30279620 DC : 0 | BS EN 16582-1 - DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| 13/30281710 DC : 0 | BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| 03/103085 DC : DRAFT FEB 2003 | EN 1498 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LOOPS |
| 08/30189619 DC : 0 | BS EN 10223-7 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| UNI EN 15714-2 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| DIN EN ISO 14713-1:2010-05 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
| DIN EN ISO 19598 E : 2017 | METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016) |
| 17/30361500 DC : 0 | BS EN ISO 4623-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
| 11/30231401 DC : 0 | BS EN ISO 16701 - CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION |
| 08/30156909 DC : DRAFT APR 2008 | BS EN 15807 - RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| UNE-EN ISO 2082:2017 | Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017) |
| ISO 6742-2:2015 | Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices |
| 12/30256073 DC | BS EN 12899-3 AMD1. Fixed, vertical road traffic signs. Part 3. Delineator posts and retroreflectors |
| 10/30196135 DC : 0 | BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| BS EN 16582-1:2015 | Domestic swimming pools General requirements including safety and test methods |
| UNI EN ISO 22068 : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| I.S. EN ISO 13129:2012 | PAINTS AND VARNISHES - ELECTROCHEMICAL MEASUREMENT OF THE PROTECTION PROVIDED TO STEEL BY PAINT COATINGS - CURRENT INTERRUPTER (CI) TECHNIQUE, RELAXATION VOLTAMMETRY (RV) TECHNIQUE AND DC TRANSIENT (DCT) MEASUREMENTS (ISO 13129:2012) |
| EN IEC 60068-2-52:2018 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| BS EN 16207:2014 | Railway applications. Braking. Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| 14/30257546 DC : 0 | BS ISO 17966 - ASSISTIVE PRODUCTS FOR PERSONAL HYGIENE THAT SUPPORT USERS - REQUIREMENTS AND TEST METHODS |
| UNI ISO 2919 : 2012 | RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION |
| PREN 13565-1 : DRAFT 2016 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| 00/715332 DC : DRAFT OCT 2000 | ISO/CD 12151-6 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS |
| UNI EN ISO 10862 : 2009 | SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS |
| ONORM EN 2133 : 2011 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH UP TO 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| BS 3900-H8(2005) : 2005 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE |
| BS ISO 10074:2017 | Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys |
| UNE-EN 15714-4:2010 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| 07/30145313 DC : 0 | BS ISO 11601 - FIRE FIGHTING - WHEELED FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION |
| 13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| 16/30339916 DC : 0 | BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| 02/563070 DC : DRAFT JULY 2002 | BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS, REQUIREMENTS AND TEST METHODS |
| CEI UNI EN 12966-1 : 2010 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: - PRODUCT STANDARD |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| 03/317247 DC : DRAFT OCT 2003 | ISO 22779 - METALLIC COATINGS - VAPOUR DEPOSITED COATINGS OF ALUMINIUM - SPECIFICATION AND TEST METHODS |
| 15/30300661 DC : 0 | BS EN ISO 19598 - METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)- FREE TREATMENT |
| BS ISO 15500-2:2012 | Road vehicles. Compressed natural gas (CNG) fuel system components Performance and general test methods |
| EN ISO 3613:2010 | Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010) |
| PREN 14566 : DRAFT 2014 | MECHANICAL FASTENERS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TESTS METHODS |
| 17/30366369 DC : 0 | BS EN 2133 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| BS EN ISO 2080:2009 | Metallic and other inorganic coatings. Surface treatment, metallic and other inorganic coatings. Vocabulary |
| 06/30079861 DC : DRAFT JULY 2006 | ISO 15484 - ROAD VEHICLES - BRAKE LININGS FRICTION MATERIALS - PRODUCT DEFINITION AND QUALITY ASSURANCE |
| 07/30172345 DC : 0 | BS EN 15724 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - SECONDARY CONTAINMENTS USED WITH TANKS COMPLYING WITH EN 13341 - REQUIREMENTS AND TEST METHODS |
| BS PAS 59(2004) : 2004 | FILLED COLLECTIVE FALL ARREST SYSTEMS |
| 12/30259634 DC : 0 | BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE |
| 02/103308 DC : DRAFT MAY 2002 | BS EN 14454 - DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION BACKFLOW PREVENTER DN 15 TO DN 32 INCLUSIVE - FAMILY H, TYPE A |
| BS 7825-3.5:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Optical and weathering properties |
| 04/19987165 DC : DRAFT SEP 2004 | BS EN 13200-4 - SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT REQUIREMENTS |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| 04/301209 DC : DRAFT JAN 2004 | EN ISO 21487 - SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS |
| DD ENV 1375-1:1994 | Identification card systems. Intersector integrated circuit(s) card additional formats ID-000 card size and physical characteristics |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| BS ISO 15726:2009 | Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron |
| 01/562882 DC : DRAFT JUL 2001 | BS EN 14225-3 - DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT (SYSTEMS) - REQUIREMENTS AND TEST METHODS |
| BS ISO 16151 : 2005 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS |
| BS ISO 17398:2004 | Safety colours and safety signs. Classification, performance and durability of safety signs |
| SAE J 3082 : 2015 | AUXILIARY TWO CONDUCTOR ELECTRICAL POWER CONNECTOR FOR TRUCK-TRAILER HIGH POWER JUMPER CABLE |
| BS ISO 8434-4 : 1995 AMD 11038 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| DIN EN 16207:2014-11 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| BS ISO 13592:1998 | Small craft. Backfire flame control for petrol engines |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| BS A 342:1999 | Nuts, plain or slotted (castellated). Procurement specification |
| BS EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| SAE J 2600 : 2015 | Compressed Hydrogen Surface Vehicle Fueling Connection Devices<br> |
| CSA Z259.12 : 2011 | CONNECTING COMPONENTS FOR PERSONAL FALL-ARREST SYSTEMS (PFAS) |
| I.S. EN 61914:2016 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| 03/300797 DC : DRAFT JAN 2003 | EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION |
| 04/301205 DC : DRAFT JAN 2004 | BS ISO 9650-3 - SMALL CRAFT - LIFERAFT - PART 3: MATERIAL |
| DIN EN 10223-8:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| DIN EN ISO 10862:2009-10 | SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS |
| DIN EN 15714-4:2010-02 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
| UNI CEI EN 12966-1 : 2010 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| DIN EN ISO 7599:2010-12 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM |
| PREN ISO 15027-1 : DRAFT 2010 | IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 1036-1:2007 | GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 1: DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| ISO 11154-4:2004 | Road vehicles Roof load carriers Part 4: Magnetic fixing devices |
| I.S. EN ISO 2919:2014 | RADIOLOGICAL PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION (ISO 2919:2012) |
| I.S. EN ISO 11997-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017) |
| CSA C22.2 No. 42-1 : 2013 : INC : UPD 1 : 2016 | COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
| I.S. EN 61010-2-012:2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| CSA C22.2 No. 42-1 : 2013 | COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
| UNE-EN ISO 12401:2010 | Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009) |
| I.S. EN ISO 4042:1999 | FASTENERS - ELECTROPLATED COATINGS |
| PREN 331 : DRAFT 2013 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| ISO 12151-2:2003 | Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| UNI ISO 8434-3 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS |
| ISO 10546:1993 | Chemical conversion coatings Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| 17/30360253 DC : 0 | BS EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| ISO 7076-2:2012 | Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment |
| ISO 15500-2:2016 | Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods |
| ISO 13985:2006 | Liquid hydrogen — Land vehicle fuel tanks |
| PREN 353-1 : DRAFT 2012 | PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
| BS EN 353-1 : 2014 | PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
| BS ISO/IEC 18745-1:2014 | Information technology. Test methods for machine readable travel documents (MRTD) and associated devices Physical test methods for passport books (durability) |
| ISO 11999-1:2015 | PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 1: General |
| ONORM EN ISO 7599 : 2010 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - GENERAL SPECIFICATIONS FOR ANODIC OXIDATION COATINGS ON ALUMINIUM |
| 16/30337101 DC : 0 | BS EN 16436-2 - RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 2: ASSEMBLIES |
| ISO 12151-5:2007 | Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends |
| I.S. EN ISO 9717:2017 | METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS (ISO 9717:2017) |
| EN ISO 11997-1:2017 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017) |
| DIN EN ISO 8434-1:2016-10 (Draft) | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| DIN EN 14236 E : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN ISO 6149-4:2017 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017) |
| 15/30327732 DC : 0 | BS EN 16856 - PORTABLE AEROSOL DISPENSER FOR FIRE EXTINGUISHING PURPOSES |
| 17/30354229 DC : 0 | BS EN 17109 - ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 12966:2015-03 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| DIN EN 14428 E : 2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| UNE-EN ISO 26945:2011 | Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011) |
| UNI EN 13071-1 : 2008 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| PREN 17109 : DRAFT 2017 | ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO/IEC 10373-1:2006 | Identification cards Test methods Part 1: General characteristics |
| ISO 12151-1:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| EN 4710-01:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification |
| EN 353-1:2014+A1:2017 | Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line |
| EN ISO 11130:2018 | Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2017) |
| ISO 14469-2:2007 | Road vehicles Compressed natural gas (CNG) refuelling connector Part 2: 20 MPa (200 bar) connector, size 2 |
| ISO 11408:1999 | Chemical conversion coatings Black oxide coating on iron and steel Specification and test methods |
| ISO 7165:2017 | Fire fighting — Portable fire extinguishers — Performance and construction |
| ISO 11515:2013 | Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
| EN ISO 8434-1:2007/AC:2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| I.S. EN 14225-2:2017 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| ISO 14655:1999 | Epoxy-coated strand for the prestressing of concrete |
| ISO 22159:2007 | Personal equipment for protection against falls — Descending devices |
| ISO 4525:2003 | Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials |
| I.S. EN ISO 10373:1995 | IDENTIFICATION CARDS - TEST METHODS |
| I.S. EN ISO 11130:2018 | CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION (ISO 11130:2017) |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| I.S. EN ISO 26945:2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF TIN-COBALT ALLOY |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| ONORM EN 16207 : 2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| DIN EN 14817 E : 2006 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR SPRING CONTROL ELEMENTS |
| DIN EN ISO 8044:2015-12 | CORROSION OF METALS AND ALLOYS - BASIC TERMS AND DEFINITIONS (ISO 8044:2015) |
| DIN EN ISO 15027-2:2013-03 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| DIN EN 15069 E : 2010 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| DIN EN 14453 E : 2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - PIPE INTERRUPTER WITH PERMANENT ATMOSPHERIC VENT DN 10 TO DN 20 - FAMILY D, TYPE C |
| DIN EN 341:2011-09 | Personal fall protection equipment - Descender devices for rescue |
| DIN EN 13802:2014-03 | Railway applications - Suspension components - Hydraulic dampers |
| DIN EN ISO 15027-1:2013-03 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| DIN EN 14455 E : 2005 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - PRESSURISED AIR INLET VALVES DN 15 TO DN 50 - FAMILY L, TYPE A AND TYPE B |
| DIN EN 10223-3:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| DIN EN 10223-7:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| BS EN ISO 4611:2010 | Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist |
| 04/30124829 DC : 0 | EN 15070 - STRIP WOUND FLEXIBLE SAFETY METALLIC HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS |
| BS EN 1496:2017 | Personal fall protection equipment. Rescue lifting devices |
| UNE-EN 14140:2015 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction |
| BS EN 4473:2010 | Aerospace series. Aluminium pigmented coatings for fasteners. Technical specification |
| UNE-EN 13659:2016 | Shutters and external venetian blinds - Performance requirements including safety |
| BS EN 12487:2007 | Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| BS EN 3-5:1996 | Portable fire extinguishers Specification and supplementary tests |
| BS EN 508-1:2014 | Roofing and cladding products from metal sheet. Specification for self-supporting of steel, aluminium or stainless steel sheet Steel |
| UNE-EN 10223-8:2014 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| BS EN 14268:2005 | Irrigation techniques. Meters for irrigation water |
| BS EN 13858:2006 | Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components |
| ISO 12402-9:2006 | Personal flotation devices Part 9: Test methods |
| BS EN 1375:2002 | Identification card system. Intersector integrated circuit(s) card additional formats. ID-000 card size and physical characteristics |
| BS EN 15496:2008 | Cycles. Requirements and test methods for cycle locks |
| EN ISO 5912:2011 | Camping tents (ISO 5912:2011) |
| BS EN 1036:1999 | Glass in building. Mirrors from silver-coated float glass for internal use |
| ISO 4521:2008 | Metallic and other inorganic coatings — Electrodeposited silver and silver alloy coatings for engineering purposes — Specification and test methods |
| ISO 14713-1:2017 | Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
| BS EN 12476:2000 | Phosphate conversion coatings of metals. Method of specifying requirements |
| BS EN ISO 12683:2004 | Mechanically deposited coatings of zinc. Specification and test methods |
| BS EN 395:1995 | Lifejackets and personal buoyancy aids. Lifejacket 100 |
| BS EN 14601 : 2005 | RAILWAY APPLICATIONS - STRAIGHT AND ANGLED END COCKS FOR BRAKE PIPE AND MAIN RESERVOIR PIPE |
| BS EN 14140:2014 | LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN 12676-1:2000 | Anti-glare systems for roads Performance and characteristics |
| BS EN 13959:2004 | Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D |
| UNE-EN ISO 11997-2:2014 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
| BS EN 10223-7:2012 | Steel wire and wire products for fencing and netting Steel wire welded panels for fencing |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| BS EN ISO 10289:2001 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates. Rating of test specimens and manufactured articles subjected to corrosion tests |
| BS EN 671-2:2001 | Fixed fire fighting systems. Hose systems Hose systems with lay-flat hose |
| BS EN 12841:2006 | Personal fall protection equipment. Rope access systems. Rope adjustment devices |
| BS EN 15434 : 2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| UNE-EN 10223-7:2013 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
| BS EN 2536:1995 | Hard anodizing of aluminium alloys |
| BS EN 14427:2014 | LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction |
| 11/30242646 DC : DRAFT FEB 2011 | BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| UNE-EN 13802:2014 | Railway applications - Suspension components - Hydraulic dampers |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| UL 514D:2ED 2013-06 | Cover Plates for Flush-Mounted Wiring Devices |
| ISO 10862:2009 | Small craft Quick release system for trapeze harness |
| UNE-EN 14195:2015 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| UNE-EN ISO 5912:2012 | Camping tents (ISO 5912:2011) |
| ISO 4611:2010 | Plastics Determination of the effects of exposure to damp heat, water spray and salt mist |
| ISO 11997-2:2013 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light |
| ISO 10289:1999 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests |
| BS EN ISO 4628-8:2012 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| BS EN ISO 16773-2:2016 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Collection of data |
| ISO 16773-2:2016 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Part 2: Collection of data |
| ISO 15730:2000 | Metallic and other inorganic coatings — Electropolishing as a means of smoothing and passivating stainless steel |
| ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
| ISO 15027-2:2012 | Immersion suits Part 2: Abandonment suits, requirements including safety |
| UNE-EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| UNE-EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013) |
| IEC 61914 : 2.0:2015 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| ISO 12683:2004 | Mechanically deposited coatings of zinc Specification and test methods |
| BS EN 12864 : 2001 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS EN 362:2004 | Personal protective equipment against falls from a height. Connectors |
| DIN EN 15434:2010-07 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010) |
| I.S. EN ISO 8044:2015 | CORROSION OF METALS AND ALLOYS - BASIC TERMS AND DEFINITIONS (ISO 8044:2015) |
| BS EN 1929-2:2004 | Basket trolleys Requirements, tests and inspection for basket trolleys with of without a child carrying facility, intended to be used on passenger conveyors |
| ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
| BS EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements |
| ISO 12401:2009 | Small craft — Deck safety harness and safety line — Safety requirements and test methods |
| ISO 13129:2012 | Paints and varnishes — Electrochemical measurement of the protection provided to steel by paint coatings — Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements |
| DIN EN 15069:2010-07 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| DIN EN 14783:2013-07 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| IEC 61537:2006 | Cable management - Cable tray systems and cable ladder systems |
| ISO 2082:2017 | Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel |
| UNE-EN ISO 1456:2010 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009) |
| UNE-EN 14601:2006 | Railway applications. Straight and agled end cocks for brake pipe and main reservoir pipe |
| BS EN 13561:2015 | External blinds and awnings. Performance requirements including safety |
| IEC 62271-202:2014 | High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| UNE-EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| ISO 9142:2003 | Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| BS EN ISO 8044:2015 | Corrosion of metals and alloys. Basic terms and definitions |
| BS EN 1866-1:2007 | Mobile fire extinguishers Characteristics, performance and test methods |
| BS EN 671-1:2012 | Fixed firefighting systems. Hose systems Hose reels with semi-rigid hose |
| ISO 15027-1:2012 | Immersion suits Part 1: Constant wear suits, requirements including safety |
| BS EN 13438:2013 | Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| IEC 62275:2013 | Cable management systems - Cable ties for electrical installations |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
| ISO 2919:2012 | Radiological protection — Sealed radioactive sources — General requirements and classification |
| BS EN ISO 15027-1:2012 | Immersion suits Constant wear suits, requirements including safety |
| BS EN 1442 : 2006 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| UNI EN ISO 5912 : 2011 | CAMPING TENTS |
| ISO 22068:2012 | Sintered-metal injection-moulded materials — Specifications |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| BS EN 14344:2004 | Child use and care articles. Child seats for cycles. Safety requirements and test methods |
| BS EN 2133:2010 | Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys |
| BS EN 13434:2006 | Devices to prevent pollution by backflow of potable water. Mechanical disconnector, hydraulic actuated. Family G, type B |
| BS EN 14452:2005 | Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, t ype B |
| BS EN ISO 8092-2:2005 | Road vehicles. Connections for on-board electrical wiring harnesses Definitions, test methods and general performance requirements |
| BS EN 364:1993 | Personal protective equipment against falls from a height. Test methods |
| BS EN 1929-1:1998 | Basket trolleys Requirements and tests for basket trolleys with or without a child carrying facility |
| UNE-EN 10169:2011 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| 08/30192115 DC : 0 | BS EN 4473 ED.P2 - AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS FOR FASTENERS - TECHNICAL SPECIFICATION |
| BS EN ISO 11439:2013 | Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| BS EN 1096-2:2012 | Glass in building. Coated glass Requirements and test methods for class A, B and S coatings |
| BS EN 399:1994 | Lifejackets and personal buoyancy aids. Lifejacket 275 |
| BS EN 4691-1:2017 | Aerospace series. Tie rod with integrated bolts Technical specification |
| BS EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| BS EN 12182:2012 | Assistive products for persons with disability. General requirements and test methods |
| BS EN 12330:2000 | Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel |
| UNE-EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| BS EN 13298:2003 | Railway applications. Suspension components. Helical suspension springs, steel |
| DIN EN 14455:2005-08 | Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| EN 14817:2006 | Railway applications - Suspension components - Air spring control elements |
| EN 1670:2007/AC:2008 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| EN 4827:2017 | Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys |
| EN 15220:2016 (edition 2) | Railway applications - Brake indicators |
| EN 1497:2007 | Personal fall protection equipment - Rescue harnesses |
| EN 16207:2014 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| EN 14455:2005 | Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B |
| EN 2437 : 2001 | AEROSPACE SERIES - CHROMATE CONVERSION COATINGS (YELLOW) FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| EN ISO 15730:2016 | Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2000) |
| EN 15081:2007 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| EN 13786:2004+A1:2008 | Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures |
| EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| EN 15132:2006 | Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods |
| EN ISO 2919:2014 | Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) |
| EN 13858:2006 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
| EN 2536 : 1995 | AEROSPACE SERIES - HARD ANODIZING OF ALUMINIUM ALLOYS |
| EN 13785:2005+A1:2008 | Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures |
| EN 15434:2006+A1:2010 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| EN 1929-2:2004 | Basket trolleys - Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| EN ISO 10289 : 2001 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999) |
| EN ISO 19598:2016 | Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016) |
| EN ISO 11997-2:2013 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| EN 1375:2002 | Identification card system - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics |
| EN 16716:2017 | Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods |
| EN ISO 26945:2011 | Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011) |
| EN 15220-1:2008+A1:2011 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| EN ISO 15027-1:2012 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| EN 364:1992/AC:1993 | PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - TEST METHODS |
| EN 13659:2015 | Shutters and external venetian blinds - Performance requirements including safety |
| EN ISO 10308:2006 | Metallic coatings - Review of porosity tests (ISO 10308:2006) |
| EN 1498:2006 (edition 2) | Personal fall protection equipment - Rescue loops |
| EN 3027:1994 | Aerospace series - Test method for dry film lubricants - Salt spray test |
| EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| EN 15496:2008 | Cycles - Requirements and test methods for cycle locks |
| EN ISO 14713-1:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
| EN 1359:2017 | Gas meters - Diaphragm gas meters |
| EN ISO 9142:2003 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
| EN 3-5:1996/AC:1997 | PORTABLE FIRE EXTINGUISHERS - SPECIFICATION AND SUPPLEMENTARY TESTS |
| EN ISO 8092-2:2005 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005) |
| EN 4704:2012 | Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
| EN 395:1993/A1:1998 | LIFEJACKET AND PERSONAL BUOYANCY AIDS - LIFEJACKETS - 100 N |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN 2289 : 1996 | AEROSPACE SERIES - ROD BODIES IN ALUMINIUM ALLOY FOR FLIGHT CONTROLS - TECHNICAL SPECIFICATION |
| EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements |
| EN ISO 21227-3 : 2007 | Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007) |
| EN ISO 15584:2017 | Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001) |
| EN ISO 16773-2:2016 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016) |
| EN ISO 12683 : 2004 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004) |
| EN 15646:2009 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| EN 14506:2005 | Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C |
| EN 14200:2004 | Railway applications - Suspension components - Parabolic springs, steel |
| EN ISO 15027-2:2012 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| EN 14454:2005 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A |
| EN ISO 17872:2007 | Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007) |
| EN 13913:2003 | Railway applications - Rubber suspension components - Elastomer-based mechanical parts |
| EN 14452:2005 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B |
| EN 3769:1997 | Aerospace series - Electrolytic polishing of corrosion resisting steels and heat resisting alloys |
| EN 15714-4:2009 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| EN 14140:2014/AC:2015 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| EN 14566:2008+A1:2009 | Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods |
| EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| EN 1929-1:1998 | Basket trolleys - Part 1: Requirements and tests for basket trolleys with or without a child carrying facility |
| EN 1866:2005 | Mobile fire extinguishers |
| EN 13959:2004 | Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D |
| EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| EN 14195:2014 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| EN 3-7:2004+A1:2007 | Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods |
| EN 4473:2010 | Aerospace series - Aluminium pigmented coatings for fasteners - Technical specification |
| EN 671-2:2012 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| EN 14268:2005/AC:2007 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| EN ISO 13129:2012 | Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012) |
| EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| EN 399:1993/A1:1998 | LIFEJACKETS AND PERSONAL BUOYANCY AIDS - LIFEJACKETS - 275 N |
| EN 16927:2017 | Mini-pools - Specific requirements including safety and test methods for mini-pools |
| EN 354:2010 | Personal fall protection equipment - Lanyards |
| EN ISO 10862:2009 | Small craft - Quick release system for trapeze harness (ISO 10862:2009) |
| EN ISO 16701:2015 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10) |
| EN 13802:2013 | Railway applications - Suspension components - Hydraulic dampers |
| EN ISO 8936:2017 | Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017) |
| EN 4826:2014 | Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners |
| EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
| EN 795:2012 | Personal fall protection equipment - Anchor devices |
| EN 341:2011 | Personal fall protection equipment - Descender devices for rescue |
| EN 14453:2005 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C |
| EN ISO 8434-4 : 2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| EN 671-1:2012 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| EN 14267:2004/AC:2008 | IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS |
| EN 3021:2017 | Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
| EN 393:1993/A1:1998 | LIFEJACKETS AND PERSONAL BUOYANCY AIDS - BUOYANCY AIDS 50 |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| 10/30197398 DC : 0 | BS ISO 17268 - GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES |
| ONORM EN ISO 12402-7 : 2015 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 12402-7:2006 + AMD 1:2011) |
| 09/30214463 DC : 0 | BS EN 2582 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C TECHNICAL SPECIFICATION |
| 15/30329088 DC : 0 | BS EN 358 - PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS AND LANYARDS FOR WORK POSITIONING OR RESTRAINT |
| UNI EN 16207 : 2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| BS ISO 12151-4:2007 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6149 metric stud ends |
| BS ISO 17966:2016 | Assistive products for personal hygiene that support users. Requirements and test methods |
| DIN EN ISO 17268:2016-02 (Draft) | GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012) |
| DIN EN ISO 22068:2014-06 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| DIN EN 16716 E : 2017 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| ASTM B 912 : 2002 | Standard Specification for Passivation of Stainless Steels Using Electropolishing |
| I.S. EN 1866:2006 | MOBILE FIRE EXTINGUISHERS |
| I.S. EN 12540:2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM |
| 12/30238456 DC : 0 | BS EN 13438 - PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| SAE J 516 : 2016 | HYDRAULIC HOSE FITTINGS |
| DIN EN 15714-3:2010-02 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| I.S. EN 1866-1:2007 | MOBILE FIRE EXTINGUISHERS - PART 1: CHARACTERISTICS, PERFORMANCE AND TEST METHODS |
| I.S. EN ISO 10289:2001 | METHODS FOR CORROSION TESTING OF METALLIC AND OTHER INORGANIC COATINGS ON METALLIC SUBSTRATES - RATING OF TEST SPECIMENS AND MANUFACTURED ARTICLES SUBJECTED TO CORROSION TESTS |
| 07/30165984 DC : 0 | BS ISO 26945 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF TIN-COBALT ALLOY |
| DD ISO/PAS 11154:2006 | Road vehicles. Roof load carriers |
| UNE-EN 15714-3:2010 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| 09/30196340 DC : 0 | BS ISO 23269-2 - SHIPS AND MARINE TECHNOLOGY - BREATHING APPARATUS FOR SHIPS - PART 2: BREATHING APPARATUS FOR SHIPBOARD FIREFIGHTERS |
| DIN EN 13523-8:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| 17/30350881 DC : DRAFT SEP 2017 | BS ISO 14993 - CORROSION OF METALS AND ALLOYS - ACCELERATED TESTING INVOLVING CYCLIC EXPOSURE TO SALT MIST, DRY AND WET CONDITIONS |
| 13/30271601 DC : 0 | BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 15584:2017 | Small craft. Inboard petrol engines. Engine-mounted fuel and electrical components |
| ISO 19203:2018 | Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables — Specifications |
| 99/100667 DC : DRAFT JAN 1999 | PREN 13433 - DISCONNECTOR DIRECT ACTUATED FAMILY G TYPE A - CHARACTERISTICS AND TESTS |
| ISO 15734:2001 | Ships and marine technology — Hydrostatic release units |
| DIN EN 15644:2009-03 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 01/712604 DC : DRAFT SEP 2001 | ISO 21207 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - ACCELERATED CORROSION TESTS INVOLVING ALTERNATE EXPOSURE FOR CORROSION PROMOTING GASES, NEUTRAL SALTS-PRAY AND DRYING |
| BS ISO 11408:1999 | Chemical conversion coatings. Black oxide coating on iron and steel. Specification and test methods |
| 14/30296410 DC : 0 | BS PREN ISO 16773-2 - ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED SPECIMENS - PART 2: COLLECTION OF DATA |
| DIN EN ISO 1456:2009-12 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009) |
| 16/30328245 DC : 0 | BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80 |
| 17/30358108 DC : 0 | BS EN 17125 - DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS |
| 00/716396 DC : DRAFT NOV 2000 | PREN ISO 16147 - SMALL CRAFT - INBOARD DIESEL ENGINES - ENGINE-MOUNTED FUEL AND ELECTRICAL COMPONENTS |
| BS ISO 15171-2:2016 | Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling with M16 x 2 end for connection under pressure |
| 03/100997 DC : DRAFT MAR 2003 | BS EN 13022-2 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: PRODUCT STANDARD FOR ULTRA-VIOLET RESISTANT SEALANT AND STRUCTURAL SEALANT |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| 02/561343 DC : DRAFT MAR 2002 | BS EN 362 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - CONNECTORS |
| 16/30333709 DC : 0 | BS ISO 10074 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - SPECIFICATION FOR HARD ANODIC OXIDATION COATINGS ON ALUMINIUM AND ITS ALLOYS |
| 17/30327510 DC : 0 | BS ISO 20766-2 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| DIN EN 16129:2013-08 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| 08/30172148 DC : DRAFT MAY 2008 | BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
| 08/30188146 DC : 0 | BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| NF EN 2583 : 1997 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| ONORM EN 4689 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| BS ISO 17745:2016 | Steel wire ring net panels. Definitions and specifications |
| 11/30229997 DC : 0 | BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| 05/30139335 DC : DRAFT SEP 2005 | EN 12487 - CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| PD ISO/TS 18684:2015 | Timekeeping instruments. Watch external parts made of hard materials. General requirements and test methods |
| BS EN 15220:2016 | Railway applications. Brake indicators |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| 15/30323348 DC : 0 | BS EN 1496 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| BS ISO 11999-1:2015 | PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures General |
| SAE J 2337-2 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| ISO 16151:2005 | Corrosion of metals and alloys Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions |
| 17/30346602 DC : 0 | BS EN ISO 11130 - CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| DIN EN 16451 E : 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| 10/30211082 DC : 0 | BS ISO 15500-2 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| BS ISO 9635-1:2014 | Agricultural irrigation equipment. Irrigation valves General requirements |
| BS EN 4710-01:2015 | Aerospace series. Quick release fastening systems for non-structural applications Technical specification |
| EN ISO 14469:2017 | Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017) |
| DIN EN ISO 16701:2015-10 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO 16701:2015) |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| BS EN ISO 16701:2015 | Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| UNE-EN ISO 2080:2010 | Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008) |
| I.S. EN 15496:2008 | CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| UNE-EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| I.S. EN ISO 14713-1:2017 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
| 02/565097 DC : DRAFT DEC 2002 | BS ISO 17398 - SAFETY COLOURS AND SAFETY SIGNS - DURABILITY OF SAFETY SIGNS |
| DIN ISO 6162-1:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| NF ISO 12151-6 : 2009 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREES CONE ENDS |
| BS EN 15096:2008 | Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification |
| BS ISO 11515 : 2013 | GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| NF ISO 12151-1 : 2010 AMD 1 2017 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| BS ISO/IEC 10373-1 : 2006 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| NF EN ISO 12401 : 2009 | SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 7583:2013 | Anodizing of aluminium and its alloys — Terms and definitions |
| 98/711362 DC : DRAFT 98 | ISO/DIS 5092-2 - ROAD VEHICLES - CONNECTIONS FOR ON ON-BOARD ELECTRICAL WIRING HARNESSES - PART 2: DEFINITIONS, TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS |
| PREN ISO 15027-2 : DRAFT 2010 | IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
| BS EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements |
| UNE-EN ISO 14713-1:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
| 17/30360728 DC : DRAFT MAY 2017 | BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| BS A 363:2000 | Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| PREN 1096-2 : DRAFT 2011 | GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS |
| 05/30127096 DC : DRAFT FEB 2005 | ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| BS EN ISO 16151:2008 | Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, \'dry\' and \'wet\' conditions |
| 02/106433 DC : DRAFT OCT 2002 | BS EN 12899-3 - FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 3: DELINEATOR POSTS AND RETROREFLECTORS |
| 01/123542 DC : DRAFT SEP 2001 | ISO 10308 - METALLIC COATINGS - REVIEW OF POROSITY TESTS |
| BS ISO 13985:2006 | Liquid hydrogen. Land vehicle fuel tanks |
| 08/30156922 DC : 0 | BS EN 15220-2 - RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 2: ELECTRICALOPERATION BRAKE INDICATORS |
| BS ISO 1456:2003 | Metallic coatings. Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium |
| UNE-EN 15714-2:2010 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| BS EN 10169 : 2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| AEP-61 : 2009 | PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS |
| UNI EN ISO 3613 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - CHROMATE CONVERSION COATINGS ON ZINC, CADMIUM, ALUMINIUM-ZINC ALLOYS AND ZINC- ALUMINIUM ALLOYS - TEST METHODS |
| BS ISO 22779:2006 | Metallic coatings. Physical vapour-deposited coatings of aluminium. Specification and test methods |
| ISO 9154:2016 | Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification |
| NF ISO 8434-6 : 2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREES CONE CONNECTORS WITH OR WITHOUT O-RING |
| PREN 71-14 : DRAFT 2017 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| DIN EN ISO 17268 E : 2017 | GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012) |
| DIN EN 15714-2:2010-02 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| UNI ISO 12151-4 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS |
| CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 | CONDUIT, TUBING, AND CABLE FITTINGS |
| DIN ISO 8936:2008-06 | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 26945:2011-06 | Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011) |
| SAE J 2337-3 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| ISO 14878:2015 | Cycles Audible warning devices Technical specification and test methods |
| DIN ISO 6162-2:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51 |
| DIN ISO 12151-2 E : 2004 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 2: HOSE FITTINGS WITH ISO 8434-1 AND ISO 8434-4 24 DEGREE CONE CONNECTOR ENDS WITH O-RINGS |
| PREN 3769 : 1996 | AEROSPACE SERIES - ELECTROLYTIC POLISHING OF CORROSION RESISTANT STEELS AND HEAT RESISTING ALLOYS |
| DIN EN 16582-1:2015-11 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| ONORM EN 16582-1 : 2015 | DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| I.S. EN 16451:2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| BS EN 15220-1 : 2008 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| I.S. EN 16716:2017 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 19598:2016 | ETALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016) |
| CSA C22.2 NO. 42.1:13 (R2017) | Cover plates for flush-mounted wiring devices (Bi-national standard, with UL 514D) |
| UNE-EN ISO 11130:2011 | Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2010) |
| ISO 4148:2004 | Road vehicles Special warning lamps Dimensions |
| I.S. EN ISO 22068:2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| ISO 10333-2:2000 | Personal fall-arrest systems — Part 2: Lanyards and energy absorbers |
| UNE-EN 12899-3:2010 | Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors |
| BS ISO 4525:2003 | Metallic coatings. Electroplated coatings of nickel plus chromium on plastics materials |
| ISO 10333-3:2000 | Personal fall-arrest systems — Part 3: Self-retracting lifelines |
| I.S. EN ISO 15730:2016 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPOLISHING AS A MEANS OF SMOOTHING AND PASSIVATING STAINLESS STEEL (ISO 15730:2000) |
| I.S. EN 16129:2013 | PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| I.S. EN ISO 8936:2017 | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
| I.S. EN 15714-3:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| DIN EN ISO 11130:2010-12 | CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| I.S. EN ISO 17268:2016 | GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012) |
| EN 14428:2015 | Shower enclosures - Functional requirements and test methods |
| PREN 13561 : DRAFT 2014 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 4710-01:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 01: TECHNICAL SPECIFICATION |
| PREN 16856 : DRAFT 2015 | PORTABLE AEROSOL DISPENSER FOR FIRE EXTINGUISHING PURPOSES |
| ISO 18869:2017 | Hydraulic fluid power — Test methods for couplings actuated with or without tools |
| ISO 28340:2013 | Combined coatings on aluminium — General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| ISO 9635-1:2014 | Agricultural irrigation equipment Irrigation valves Part 1: General requirements |
| ISO 12944-6:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| UNI EN 4704 : 2013 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| UNI EN ISO 2081 : 2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| UNE-EN ISO 15584:2017 | Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001) |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| 15/30301583 DC : 0 | BS EN 16863 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE REFLECTIVE INSULATION PRODUCTS (RI) - SPECIFICATION |
| 16/30339220 DC : 0 | BS EN 17001 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - COATING SPECIFICATION |
| BS EN 14428 : 2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| NF ISO 12151-3 : 2010 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| DIN EN ISO 19598:2015-07 (Draft) | METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016) |
| EN ISO 9717:2017 | METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS (ISO 9717:2017) |
| UNE-EN 12966:2015 | Road vertical signs - Variable message traffic signs |
| UNE-EN ISO 9717:2013 | Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2010) |
| I.S. EN 353-1:2014 | PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
| DIN EN 16927:2015-10 (Draft) | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| ISO 7076-4:2016 | Fire protection Foam fire extinguishing systems Part 4: High expansion foam equipment |
| ISO 23269-1:2008 | Ships and marine technology — Breathing apparatus for ships — Part 1: Emergency escape breathing devices (EEBD) for shipboard use |
| I.S. EN ISO 10683:2014 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| I.S. EN ISO 1456:2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND OF COPPER PLUS NICKEL PLUS CHROMIUM |
| ISO 16380:2014 | Road vehicles — Blended fuels refuelling connector |
| ISO 11154-1:1995 | Road vehicles Roof load carriers Part 1: Roof bars |
| I.S. EN ISO 2080:2009 | METALLIC AND OTHER INORGANIC COATINGS - SURFACE TREATMENT, METALLIC AND OTHER INORGANIC COATINGS - VOCABULARY |
| ISO 6162:1994 | Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series |
| I.S. EN 4473:2010 | AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS FOR FASTENERS - TECHNICAL SPECIFICATION |
| ISO 17268:2012 | Gaseous hydrogen land vehicle refuelling connection devices |
| BS EN 13120:2009+A1:2014 | Internal blinds. Performance requirements including safety |
| DIN EN ISO 12402-7:2015-08 (Draft) | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 14344 E : 2004 | |
| DIN EN ISO 9142 E : 2004 | ADHESIVES - GUIDE TO THE SELECTION OF STANDARD LABORATORY - AGEING CONDITIONS FOR TESTING BONDED JOINTS |
| DIN EN ISO 17872:2007-06 | PAINTS AND VARNISHES - GUIDELINES FOR THE INTRODUCTION OF SCRIBE MARKS THROUGH COATINGS ON METALLIC PANELS FOR CORROSION TESTING |
| DIN EN ISO 12402-9:2015-08 (Draft) | PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
| DIN EN 13659:2015-07 | SHUTTERS AND EXTERNAL VENETIAN BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN ISO 10308:2006-04 | METALLIC COATINGS - REVIEW OF POROSITY TESTS |
| DIN EN 13298:2003-11 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HELICAL SUSPENSION SPRINGS, STEEL |
| BS EN 13659:2015 | Shutters and external venetian blinds. Performance requirements including safety |
| BS EN ISO 10308:2006 | Metallic coatings. Review of porosity tests |
| BS EN 13200-4:2006 | Spectator facilities Seats. Product characteristics |
| UNE-EN 508-1:2014 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| BS EN 12373-1:2001 | Aluminium and aluminium alloys. Anodizing Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| 14/30299887 DC : 0 | BS ISO 11601 - FIRE FIGHTING - WHEELED FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION |
| BS EN 396:1994 | Lifejackets and personal buoyancy aids. Lifejacket 150 |
| BS EN 10223-3:2013 | Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| I.S. EN ISO 5912:2011 | CAMPING TENTS (ISO 5912:2011) |
| BS EN 505:2013 | Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet |
| BS EN ISO 21227-3:2007 | Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging Evaluation of delamination and corrosion around a scribe |
| BS EN 3769:1997 | Electrolytic polishing of corrosion resisting steels and heat resisting alloys |
| BS EN 1359:2017 | Gas meters. Diaphragm gas meters |
| BS EN 1036-2:2008 | Glass in building. Mirrors from silver-coated float glass for internal use Evaluation of conformity; product standard |
| UNE-EN ISO 15027-2:2013 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| ISO 17872:2007 | Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| ISO 4527:2003 | Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
| BS EN 13071:2002 | Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste |
| BS EN 14455:2005 | Devices to prevent pollution by backflow of potable water. Pressurised air inlet valves DN 15 to DN 50. Family L, type A and type B |
| BS EN 3027:1994 | Test method for dry film lubricants. Salt spray test |
| ISO 19598:2016 | Metallic coatings — Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment |
| BS EN ISO 15027-2:2012 | Immersion suits Abandonment suits, requirements including safety |
| BS EN ISO 4623-2:2004 | Paints and varnishes. Determination of resistance to filiform corrosion Aluminium substrates |
| BS EN 62271-202:2014 | High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation |
| BS EN 15081:2007 | Industrial valves. Mounting kits for part-turn valve actuator attachment |
| BS EN 15132:2006 | Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods |
| ISO 10308:2006 | Metallic coatings Review of porosity tests |
| DIN EN 16716:2017-05 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 19598:2017-04 | METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016) |
| EN 1036 : 1999 | GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE |
| EN 13071-1:2008/AC:2010 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 5912:2013-08 | CAMPING TENTS (ISO 5912:2011) |
| EN 13434:2006 | Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B |
| DIN EN 14817:2006-08 | Railway applications - Suspension components - Air spring control elements |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| EN 12966:2014 | Road vertical signs - Variable message traffic signs |
| EN 12329 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| EN 1036-2:2008 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard |
| EN 61914:2016 | Cable cleats for electrical installations |
| EN 13760:2003 | Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
| DIN EN ISO 2081:2009-05 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| UNI EN ISO 11439 : 2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES |
| DIN EN 13959:2005-01 | Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004 |
| DIN EN 671-2:2012-07 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| DIN EN 671-1:2012-07 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| DIN EN 14454:2005-08 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A |
| EN 1036-1:2007 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods |
| DIN EN ISO 3613:2011-04 | Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010) |
| EN 12373-1 : 2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
| DIN EN 14452:2005-08 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B; German version EN 14452:2005 |
| EN 61537:2007 | Cable management - Cable tray systems and cable ladder systems |
| EN 12841:2006 | Personal fall protection equipment - Rope access systems - Rope adjustment devices |
| EN 14601:2005+A1:2010 | Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
| EN 13200-4:2006 | Spectator facilities - Part 4: Seats - Product characteristics |
| DIN EN ISO 14923:2003-10 | THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS |
| DIN EN 14140:2017-01 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| DIN ISO 12151-3:2012-08 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010) |
| DIN EN ISO 4521:2009-01 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| DIN EN 14506:2005-08 | Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C |
| DIN EN 14200:2004-05 | Railway applications - Suspension components - Parabolic springs, steel |
| DIN ISO 15171-1:2004-05 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999) |
| DIN EN 15081:2008-03 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| EN 13298:2003 | Railway applications - Suspension components - Helical suspension springs, steel |
| ONORM EN 508-1 : 2014 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF - SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| DIN EN ISO 12683:2005-02 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004); German version EN ISO 12683:2004 |
| DIN EN 12966-1:2010-03 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| DIN EN 14353:2017-09 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 13913:2003-08 | RAILWAY APPLICATIONS - RUBBER SUSPENSION COMPONENTS - ELASTOMER-BASED MECHANICAL PARTS |
| DIN EN 13858:2007-02 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
| DIN EN 15646:2009-07 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12841:2006 | PERSONAL FALL PROTECTION EQUIPMENT - ROPE ACCESS SYSTEMS - ROPE ADJUSTMENT DEVICES |
| UNE-EN 15434:2007 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| PREN 4826 : DRAFT 2013 | AEROSPACE SERIES - ZINC-NICKEL (12-16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER ALLOYS, NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS |
| PREN 4473 : 200P2 | AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS FOR FASTENERS - TECHNICAL SPECIFICATION |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| AS 2699.2:2020 | Built-in components for masonry construction Connectors and accessories |
| ISO 7599:2010 | Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium |
| ISO 8993:2010 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Chart method |
| AS 1891.5:2020 | Personal equipment for work at height Manufacturing requirements for lanyard assemblies and pole straps |
| ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
| ISO 8994:2011 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Grid method |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 4628-8:2012 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| AS/NZS 1891.1:2020 | Personal equipment for work at height Manufacturing requirements for full body combination and lower body harnesses |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| ISO 4628-3:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
| ISO 17872:2007 | Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| ISO 4628-1:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| AS 2699.1:2020 | Built-in components for masonry construction Wall ties |
| ISO 4527:2003 | Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
| ISO 4520:1981 | Chromate conversion coatings on electroplated zinc and cadmium coatings |
| AS 2699.3:2020 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 8407:2009 | Corrosion of metals and alloys Removal of corrosion products from corrosion test specimens |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| AS 4967:2019 | Protective clothing for firefighters - Requirements and test methods for protective clothing used for structural firefighting |
| ISO 10289:1999 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests |
| ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.