• There are no items in your cart

ISO 9239-1:2010

Current
Current

The latest, up-to-date edition.

Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

05-31-2010

ISO 9239-1:2010 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.

This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.

ISO 9239-1:2010 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

DevelopmentNote
Supersedes ISO/FDIS 9239-1. (06/2010)
DocumentType
Standard
Pages
25
PublisherName
International Organization for Standardization
Status
Current
Supersedes

ISO 20326:2016 Resilient floor coverings — Specification for floor panels/assembly for loose laying
11/30213807 DC : 0 BS ISO 14486 - LAMINATE FLOOR COVERINGS - LAMINATE FLOOR COVERING - SPECIFICATION
BS EN ISO 10582:2018 Resilient floor coverings. Heterogeneous poly(vinyl chloride) floor covering. Specifications
ISO 14486:2012 Laminate floor coverings — Specification
BS ISO 6347:2017 Textile floor coverings. Consumer information
CEN/TR 14819-2:2005 Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations
12/30211334 DC : 0 BS ISO 15791-1 - PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO/DIS 15791-1:2012)
CEI UNI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
PREN 1504-2 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
BS ISO 14486:2012 Laminate floor coverings. Specification
I.S. EN 14041:2018 RESILIENT, TEXTILE, LAMINATE AND MODULAR MULTILAYER FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
06/30151267 DC : 0 BS ISO CD 10840 - PLASTICS - GUIDANCE FOR THE USE OF STANDARD FIRE TESTS
DD ISO/TS 14934-4:2007 Fire tests. Calibration of heat flux meters Guidance on the use of heat flux meters in fire tests
ISO 10575:2012 Resilient floor coverings — Specification for rubber sheet floor coverings with backing
PREN 14904-1 : DRAFT 2017 SURFACES FOR SPORTS AREAS - MULTI-SPORTS FLOOR SYSTEMS FOR INDOOR USE - PART 1: ESSENTIAL CHARACTERISTICS
BS ISO 14697:2007 Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products
DD CEN/TS 15398:2006 Resilient, textile and laminate floor coverings. Floor covering standard symbols
ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials — Their development and application
BS EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
I.S. EN 13501-1:2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
S.R. CEN TS 15534-1:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
UNI EN ISO 25762 : 2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
ISO/TS 5658-1:2006 Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
15/30324901 DC : 0 BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
I.S. EN ISO 10582:2018 RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLY(VINYL CHLORIDE) FLOOR COVERINGS - SPECIFICATION (ISO 10582:2017)
ISO/TS 14934-4:2007 Fire tests Calibration of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
ONORM EN 13501-1 : 2009 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
DIN EN 14342 E : 2013 WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
13/30280057 DC : 0 BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY
ISO 26986:2010 Resilient floor coverings Expanded (cushioned) poly(vinyl chloride) floor covering Specification
BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance
CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
CEN/TS 15679:2007 Thermal Modified Timber - Definitions and characteristics
15/30318203 DC : 0 BS ISO 20326 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR FLOOR PANELS FOR LOOSE LAYING
I.S. CEN TS 15398:2006 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS
ISO 19322:2018 Resilient floor coverings — Specification for floor coverings based on thermoplastic polymers
ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
UNI EN ISO 10595 : 2012 RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE/VINYLCOMPOSITION (VCT) POLY(VINYL CHLORIDE) FLOOR TILES - SPECIFICATION
BS EN ISO 24011:2012 Resilient floor coverings. Specification for plain and decorative linoleum
04/19990095 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
12/30266170 DC : 0 BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
DIN EN ISO 25762:2012-04 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
ISO 10840:2008 Plastics Guidance for the use of standard fire tests
BS EN ISO 26986:2012 Resilient floor coverings. Expanded (cushioned) poly(vinyl chloride) floor covering. Specification Expanded (cushioned) poly(vinyl chloride) floor covering - Specification (ISO 26986:2010)
ISO 16905:2015 Resilient floor coverings Specification for rubber floor covering Tile/Plank
BS ISO 10840:2008 Plastics. Guidance for the use of standard fire tests
BS ISO TR 11925-1:1999 Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Guidance on ignitability
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products
PREN 14374 : DRAFT 2016 TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS
IEC 60695-1-12:2015 Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering
I.S. EN 45545-2:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
I.S. CEN/TS 15117:2005 GUIDANCE ON DIRECT AND EXTENDED APPLICATION
S.R. CEN/TS 45545-2:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
DIN EN 14342:2013-09 Wood flooring - Characteristics, evaluation of conformity and marking
UNE-EN 13238:2011 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
I.S. EN 13238:2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES
I.S. EN 14342:2013 WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 438-5:2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES
I.S. EN ISO 15791-1:2013 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014)
DIN EN 13238:2010-06 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
BS 5287:1988 Specification for assessment and labelling of textile floor coverings tested to BS 4790
UNI CEI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
BS ISO 20326 : 2016 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR FLOOR PANELS/ASSEMBLY FOR LOOSE LAYING
14/30303785 DC : 0 BS EN 438-5 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES
14/30260383 DC : 0 BS ISO 16905 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER FLOOR COVERING - TILE/PLANK
10/30216687 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
UNE-EN 13501-1:2007 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
09/30179605 DC : 0 BS ISO 10581 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATION
PD CEN/TR 14819-2:2005 Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Other funicular railways and other installations
BS ISO TR 5658-1:1997 Reaction to fire tests. Spread of flame Guidance on flame spread
UNE-EN ISO 10582:2012 Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor coverings - Specification (ISO 10582:2010)
BS ISO 25762 : 2009 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
17/30342148 DC : 0 BS ISO 19821 - DETERMINATION OF SPAN RATING FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS
DD CEN/TS 15117:2005 Guidance on direct and extended application
BS ISO/TR 11696-2:1999 Uses of reaction to fire test results Fire hazard assessment of construction products
DIN EN ISO 26986:2012-04 Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification (ISO 26986:2010)
BS ISO/TR 11696-1:1999 Uses of reaction to fire test results Application of test results to predict fire performance of internal linings and other building products
BS ISO 14934-4:2014 Fire tests. Calibration and use of heat flux meters Guidance on the use of heat flux meters in fire tests
BS EN ISO 10595:2012 Resilient floor coverings. Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles. Specification
16/30339855 DC : 0 BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
ISO/TR 11925-1:1999 Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability
09/30194024 DC : DRAFT FEB 2009 BS EN 15912 - DURABILITY OF REACTION TO FIRE PERFORMANCES - CLASSES OF FIRE RETARDANT TREATED WOOD-BASED PRODUCT IN INTERIOR AND EXTERIOR END USE APPLICATIONS
UNI EN ISO 26986 : 2012 RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATION
15/30329856 DC : 0 BS EN 14904 - SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
UNI EN ISO 24011 : 2012 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM
UNE-CEN/TS 15679:2009 EX Thermal Modified Timber - Definitions and characteristics
I.S. EN ISO 10595:2012 RESILIENT FLOOR COVERINGS - SEMIFLEXIBLE/VINYLCOMPOSITION (VCT) POLY(VINYL CHLORIDE) FLOOR TILES - SPECIFICATION (ISO 10595:2010)
I.S. CEN TR 14819-2:2006 SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 2: OTHER FUNICULAR RAILWAYS AND OTHER INSTALLATIONS
ISO/TR 10840:1993 Plastics Burning behaviour Guidance for development and use of fire tests
BS EN 13501-1 : 2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
DIN EN 438-5:2016-06 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES
ISO 24011:2009 Resilient floor coverings Specification for plain and decorative linoleum
EN 13501-1:2007+A1:2009 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN ISO 15791-1:2013 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
UNI EN ISO 15791-1 : 2014 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
UNI EN 14342 : 2013 WOOD FLOORING AND PARQUET - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
UNI EN 13238 : 2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES
BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
I.S. EN ISO 24011:2012 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM (ISO 24011:2009)
BS ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
ISO 14697:2007 Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
09/30176641 DC : 0 BS ISO 10577 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER SHEET FLOOR COVERINGS WITHOUT BACKING
09/30179608 DC : 0 BS ISO 10582 - RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLY(VINYL CHLORIDE) FLOOR COVERINGS - SPECIFICATION
BS ISO 10575:2012 Resilient floor coverings. Specification for rubber sheet floor coverings with backing
17/30348262 DC : 0 BS EN 13501-1 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING TEST DATA FROM REACTION TO FIRE TESTS
15/30303016 DC : 0 BS EN ISO 10582 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HETEROGENEOUS VINYL FLOORING TO INCLUDE LUXURY VINYL TILE REQUIREMENTS
ISO/TR 17252:2008 Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering
DD CEN/TS 15679:2007 Thermal modified timber. Definitions and characteristics
UNI CEN/TS 15679 : 2008 THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS
09/30179615 DC : 0 BS ISO 10595 - RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE/VINYLCOMPOSITION (VCT) POLY(VINYL CHLORIDE) FLOOR TILES - SPECIFICATION
09/30176638 DC : 0 BS ISO 10575 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER SHEET FLOOR COVERING WITH BACKING
16/30340580 DC : 0 BS EN 17009 - FLOORING OF LIGNIFIED MATERIALS OTHER THAN WOOD - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
PREN 14904 : DRAFT 2015 SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
UNI CEI CEN/TS 45545-2 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
DIN EN 13501-1:2010-01 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
PD ISO/TR 16576:2017 Fire safety engineering. Examples of fire safety objectives, functional requirements and safety criteria
DIN EN 45545-2:2016-02 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
ISO 6347:2017 Textile floor coverings — Consumer information
BS ISO 15791-1 : 2002 AMD 15256 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
DD ISO/TS 5658-1:2006 Reaction to fire tests. Spread of flame Guidance on flame spread
DD CEN/TS 45545-2:2009 Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components
I.S. EN ISO 25762:2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009)
PREN 438-5 : DRAFT 2014 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES
15/30316975 DC : 0 BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
I.S. EN ISO 26986:2012 RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATION (ISO 26986:2010)
ISO/TS 15791-2:2017 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
PREN 14904-2 : DRAFT 2017 SURFACES FOR SPORTS AREAS - MULTI-SPORTS FLOOR SYSTEMS FOR INDOOR USE - PART 2: SPECIFICATIONS
PREN 14041 : DRAFT 2016 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
ISO 11638:2012 Resilient floor coverings Heterogeneous poly(vinyl chloride) flooring on foam Specification
ISO 10582:2017 Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor covering — Specifications
ISO 14934-3:2012 Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
EN ISO 10582:2018 Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10582:2017)
S.R. CEN TS 15534-3:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 3: CHARACTERISATION OF WPC PRODUCTS
I.S. CEN/TS 15447:2006 MOUNTING AND FIXING IN REACTION TO FIRE TESTS UNDER THE CONSTRUCTION PRODUCTS DIRECTIVE
BS EN ISO 10093:1999 Plastics. Fire tests. Standard ignition sources
UNE-EN 14342:2013 Wood flooring and parquet - Characteristics, evaluation of conformity and marking
BS EN 14342:2013 Wood flooring and parquet. Characteristics, evaluation of conformity and marking
UNE-EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
ISO 15791-1:2014 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance
ISO 25762:2009 Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
EN ISO 10595:2012/AC:2012 RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE/VINYLCOMPOSITION (VCT) POLY(VINYL CHLORIDE) FLOOR TILES - SPECIFICATION (ISO 10595:2010)
EN 438-5:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
EN ISO 26986:2012/AC:2012 RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATION (ISO 26986:2010)
EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
EN 14342:2013 Wood flooring and parquet - Characteristics, evaluation of conformity and marking
EN ISO 24011 : 2012 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM (ISO 24011:2009)
13/30238193 DC : DRAFT DEC 2013 BS ISO 16616 - TEST METHODS FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS
PREN 13501-1 : DRAFT 2017 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING TEST DATA FROM REACTION TO FIRE TESTS
13/30292037 DC : 0 BS ISO 14934-4 - FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS
I.S. EN 15534-1:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
DD CEN/TS 15447:2006 Mounting and fixing in reaction to fire tests under the Construction Products Directive
BS ISO 10577:2012 Resilient floor coverings. Specification for rubber sheet floor coverings without back
PD ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials. Their development and application
DIN EN ISO 24011:2012-04 Resilient floor coverings - Specification for plain and decorative linoleum (ISO 24011:2009)
BS EN 15534-1 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
ISO 9239-2:2002 Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
S.R. CEN/TS 15679:2007 THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS
DD CEN/TS 15534-3:2007 Wood-plastics composites (WPC) Characterisation of WPC products
BS ISO 16905 : 2015 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER FLOOR COVERING - TILE/PLANK
UNE-EN 45545-2:2013 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components
UNI EN 13501-1 : 2009 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
ISO 10577:2012 Resilient floor coverings — Specification for rubber sheet floor coverings without backing
ISO/TR 16576:2017 Fire safety engineering Examples of fire safety objectives, functional requirements and safety criteria
UNE-EN ISO 10595:2012 Resilient floor coverings - Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles - Specification (ISO 10595:2010)
PREN 1504-3 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
UNE-EN ISO 24011:2012 Resilient floor coverings - Specification for plain and decorative linoleum (ISO 24011:2009)
ISO 14934-4:2014 Fire tests Calibration and use of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
ISO/TR 11696-2:1999 Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products
DIN EN ISO 15791-1:2014-05 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
UNE-EN 438-5:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
BS EN 13238:2010 Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates
BS EN 438-5:2016 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
ISO 10595:2010 Resilient floor coverings Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles Specification
CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products
CEN/TS 15447:2006 Mounting and fixing in reaction to fire tests under the Construction Products Directive
CEN/TS 45545-2:2009 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
CEN/TS 15117:2005 Guidance on direct and extended application
DIN EN ISO 10595:2012-04 RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE/VINYLCOMPOSITION(VCT) POLY(VINYL CHLORIDE) FLOOR TILES - SPECIFICATION (ISO 10595:2010)

DIN 50055:1989-03 LIGHT MEASURING BEAM FOR TESTING SMOKE DEVELOPMENT
ISO 13943:2017 Fire safety — Vocabulary
EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
ISO 14934-3:2012 Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
IEC 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
ISO 14697:2007 Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products

View more information
US$150.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.