Practice for use of a dichromate dosimetry system

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

11-05-2013

Publisher

International Organization for Standardization

ISO/ASTM 51401:2013 covers the preparation, testing, and procedure for using the acidic aqueous silver dichromate dosimetry system to measure absorbed dose to water when exposed to ionizing radiation. The system consists of a dosimeter and appropriate analytical instrumentation. For simplicity, the system will be referred to as the dichromate system. The dichromate dosimeter is classified as a type I dosimeter on the basis of the effect of influence quantities. The dichromate system can be used as either a reference standard dosimetry system or a routine dosimetry system.

ISO/ASTM 51401:2013 is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing, and describes a means of achieving compliance with the requirements of ISO/ASTM Practice 52628 for the dichromate dosimetry system. It is intended to be read in conjunction with ISO/ASTM Practice 52628.

ISO/ASTM 51401:2013 describes the spectrophotometric analysis procedures for the dichromate system. It applies only to gamma radiation, X-radiation/bremsstrahlung, and high energy electrons.

Committee	ISO/TC 85
DevelopmentNote	Supersedes ASTM E 1401 (05/2002) Supersedes ISO 15561 (06/2002) Supersedes ISO/ASTM DIS 51401. (11/2013)
DocumentType	Standard
Pages	6
PublisherName	International Organization for Standardization
Status	Current
Supersedes	ISO/ASTM 51401:2003 ISO 15561:1998 ASTM E 1401 : 2013

14/30286829 DC : 0	BS ISO 12749-4 - NUCLEAR ENERGY, NUCLEAR TECHNOLOGIES, AND RADIOLOGICAL PROTECTION - VOCABULARY - PART 4: DOSIMETRY FOR RADIATION PROCESSING
04/30118691 DC : DRAFT AUG 2004	BS ISO ASTM 51649 - PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV
CSA Z11137-3 : 2007 : R2012 : FR	STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
DIN EN ISO 11137-3:2015-08 (Draft)	STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
13/30264511 DC : 0	BS ISO/ASTM 52628 - STANDARD PRACTICE FOR DOSIMETRY IN RADIATION PROCESSING
04/30081279 DC : DRAFT MAY 2004	BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
BS ISO 12749-4:2015	Nuclear energy, nuclear technologies, and radiological protection. Vocabulary Dosimetry for radiation processing
15/30282559 DC : 0	BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
CSA Z11137-3 : 2007 : R2012	STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
BS EN 60544-1:2013	Electrical insulating materials. Determination of the effects of ionizing radiation Radiation interaction and dosimetry
IEC 60544-1:2013	Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry
I.S. EN ISO 11137-3:2017	STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
04/30109485 DC : DRAFT AUG 2004	ISO 51431 - PRACTICE FOR DOSIMETRY IN ELECTRON BEAM AND X-RAY (BREMSSTRAHLUNG) IRRADIATION FACILITIES FOR FOOD PROCESSING
CEI EN 60544-1 : 2014	ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY
04/30108659 DC : DRAFT FEB 2004	ISO 51204 - PRACTICE FOR DOSIMETRY IN GAMMA IRRADIATION FACILITIES FOR FOOD PROCESSING
CAN/CSA-ISO 11137-3:17	Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06)
ISO/ASTM 51204:2004	Practice for dosimetry in gamma irradiation facilities for food processing
ISO 12749-4:2015	Nuclear energy, nuclear technologies, and radiological protection Vocabulary Part 4: Dosimetry for radiation processing
CSA Z11137-3 : 2007	STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
04/30109483 DC : DRAFT AUG 2004	BS ISO ASTM 51608 - PRACTICE FOR DOSIMETRY IN AN X-RAY (BREMSSTRAHLUNG) FACILITY FOR RADIATION PROCESSING
CSA Z11137-3 :2007	STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
I.S. EN 60544-1:2013	ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY (IEC 60544-1:2013 (EQV))
ANSI/AAMI/ISO 11137-3:2017	STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
ISO 11137-3:2017	Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control
EN ISO 11137-3:2017	Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017)
04/30108670 DC : DRAFT FEB 2004	ISO 51702 - PRACTICE FOR DOSIMETRY IN GAMMA IRRADIATION FACILITIES FOR RADIATION PROCESSING
12/30259937 DC : 0	BS EN 50544-1 - ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY
CSA Z11137-3 : 2007 : R2016	STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
ISO/ASTM 52628:2013	Standard practice for dosimetry in radiation processing
BS EN ISO 11137-3:2017	Sterilization of health care products. Radiation Guidance on dosimetric aspects of development, validation and routine control
EN 60544-1:2013	Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry

ISO/IEC 17025:2005	General requirements for the competence of testing and calibration laboratories
ISO/ASTM 51261:2013	Practice for calibration of routine dosimetry systems for radiation processing
ASTM E 275 : 2008	Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E 170 : 2017 : REDLINE	Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E 668 : 2013 : REDLINE	Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
ISO/ASTM 51707:2015	Guide for estimation of measurement uncertainty in dosimetry for radiation processing
ASTM E 666 : 2014 : REDLINE	Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation
ASTM E 958 : 2013 : REDLINE	Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers