ISO/ASTM 51608:2015
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
03-17-2015
ISO/ASTM 51608:2015 outlines the dosimetric procedures to be followed during installation qualification, operational qualification, performance qualification and routine processing at an X-ray (bremsstrahlung) irradiator. Other procedures related to operational qualification, performance qualification and routine processing that may influence absorbed dose in the product are also discussed.
ISO/ASTM 51608:2015 is one of a set of standards that provides recommendations for properly implementing and utilizing dosimetry in radiation processing. It is intended to be read in conjunction with ISO/ASTM Practice 52628, "Practice for Dosimetry in Radiation Processing".
In contrast to monoenergetic gamma radiation, the X-ray energy spectrum extends from low values (about 35 keV) up to the maximum energy of the electrons incident on the X-ray target.
DevelopmentNote |
Supersedes ASTM E 1608 (05/2002) Supersedes ISO 15567 (06/2002) Supersedes ISO/ASTM DIS 51608. (03/2015)
|
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
14/30286829 DC : 0 | BS ISO 12749-4 - NUCLEAR ENERGY, NUCLEAR TECHNOLOGIES, AND RADIOLOGICAL PROTECTION - VOCABULARY - PART 4: DOSIMETRY FOR RADIATION PROCESSING |
13/30281229 DC : 0 | BS ISO 51956 - PRACTICE FOR USE OF THERMOLUMINESCENCE DOSIMETRY (TLD) SYSTEMS FOR RADIATION PROCESSING |
CSA Z11137-3 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
DIN EN ISO 11137-3:2015-08 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
13/30264511 DC : 0 | BS ISO/ASTM 52628 - STANDARD PRACTICE FOR DOSIMETRY IN RADIATION PROCESSING |
04/30081279 DC : DRAFT MAY 2004 | BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
12/30256719 DC : 0 | BS ISO/ASTM 51940 - GUIDE FOR DOSIMETRY FOR STERILE INSECTS RELEASE PROGRAMS |
BS ISO 12749-4:2015 | Nuclear energy, nuclear technologies, and radiological protection. Vocabulary Dosimetry for radiation processing |
14/30303365 DC : 0 | BS ISO/ASTM 51649 - PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV |
15/30282559 DC : 0 | BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL |
BS ISO 14470:2011 | Food irradiation. Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
04/30108676 DC : 0 | ISO 51939 - PRACTICE FOR BLOOD IRRADIATION DOSIMETRY |
CSA Z11137-3 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
ISO/ASTM 51539:2013 | Guide for use of radiation-sensitive indicators |
BS EN 60544-1:2013 | Electrical insulating materials. Determination of the effects of ionizing radiation Radiation interaction and dosimetry |
AAMI TIR 29:2012(R2017) | GUIDE FOR PROCESS CHARACTERIZATION AND CONTROL IN RADIATION STERILIZATION OF MEDICAL DEVICES |
AAMI TIR 29:2012 | GUIDE FOR PROCESS CHARACTERIZATION AND CONTROL IN RADIATION STERILIZATION OF MEDICAL DEVICES |
ISO/ASTM 52628:2013 | Standard practice for dosimetry in radiation processing |
IEC 60544-1:2013 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry |
I.S. EN ISO 11137-3:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
ASTM E 2304 : 2003 : R2011 | Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System (Withdrawn 2020) |
04/30109485 DC : DRAFT AUG 2004 | ISO 51431 - PRACTICE FOR DOSIMETRY IN ELECTRON BEAM AND X-RAY (BREMSSTRAHLUNG) IRRADIATION FACILITIES FOR FOOD PROCESSING |
14/30315832 DC : 0 | BS ISO/ASTM 52303 - GUIDE FOR ABSORBED-DOSE MAPPING IN RADIATION PROCESSING FACILITIES |
CEI EN 60544-1 : 2014 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY |
12/30256716 DC : 0 | BS ISO/ASTM 51702 - PRACTICE FOR DOSIMETRY IN A GAMMA IRRADIATION FACILITY FOR RADIATION PROCESSING |
CAN/CSA-ISO 11137-3:17 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06) |
ISO 14470:2011 | Food irradiation — Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
ISO/ASTM 52303:2015 | Guide for absorbed-dose mapping in radiation processing facilities |
ISO/ASTM 51707:2015 | Guide for estimation of measurement uncertainty in dosimetry for radiation processing |
ISO 12749-4:2015 | Nuclear energy, nuclear technologies, and radiological protection Vocabulary Part 4: Dosimetry for radiation processing |
ISO/ASTM 51940:2013 | Guide for dosimetry for sterile insects release programs |
CSA Z11137-3 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
ASTM E 2304 : 2003 | Standard Practice for Use of a Lif Photo-Fluorescent Film Dosimetry System |
ASTM E 2381 : 2004 : R2010 | Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams (Withdrawn 2016) |
CSA Z11137-3 :2007 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
I.S. EN 60544-1:2013 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY (IEC 60544-1:2013 (EQV)) |
ANSI/AAMI/ISO 11137-3:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL |
ISO/ASTM 51702:2013 | Practice for dosimetry in a gamma facility for radiation processing |
ISO 11137-3:2017 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control |
EN ISO 11137-3:2017 | Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017) |
04/30108679 DC : DRAFT FEB 2004 | ISO 51940 - GUIDE FOR DOSIMETRY FOR STERILE INSECT RELEASE PROGRAMS |
04/30108670 DC : DRAFT FEB 2004 | ISO 51702 - PRACTICE FOR DOSIMETRY IN GAMMA IRRADIATION FACILITIES FOR RADIATION PROCESSING |
12/30259937 DC : 0 | BS EN 50544-1 - ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY |
CSA Z11137-3 : 2007 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
ASTM F 1356 : 2016 : REDLINE | Standard Guide for Irradiation of Fresh, Frozen or Processed Meat and Poultry to Control Pathogens and Other Microorganisms |
ISO/ASTM 51956:2013 | Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing |
ASTM E 2303 : 2015 : REDLINE | Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities |
ISO/ASTM 51649:2015 | Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV |
ASTM E 2381 : 2004 | Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams |
BS EN ISO 11137-3:2017 | Sterilization of health care products. Radiation Guidance on dosimetric aspects of development, validation and routine control |
EN 60544-1:2013 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry |
ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
ISO/ASTM 51702:2013 | Practice for dosimetry in a gamma facility for radiation processing |
CFR 21(PTS170-199) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 170-199 |
ISO/ASTM 51818:2013 | Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV |
ISO/ASTM 51261:2013 | Practice for calibration of routine dosimetry systems for radiation processing |
ASTM E 170 : 2017 : REDLINE | Standard Terminology Relating to Radiation Measurements and Dosimetry |
ASTM E 2232 : 2016 : REDLINE | Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications |
ISO/ASTM 51539:2013 | Guide for use of radiation-sensitive indicators |
ISO/ASTM 52701:2013 | Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing |
ISO 14470:2011 | Food irradiation — Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
ISO/ASTM 51649:2015 | Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV |
ISO/ASTM 51707:2015 | Guide for estimation of measurement uncertainty in dosimetry for radiation processing |
ISO/ASTM 52628:2013 | Standard practice for dosimetry in radiation processing |
ASTM E 2303 : 2015 : REDLINE | Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.