ISO/TR 10064-4:1998
Current
Current
The latest, up-to-date edition.
Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
10-15-1998
DocumentType |
Technical Report
|
Pages |
25
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
SAC GB/Z 18620.4 : 2002 | Identical |
NEN NPR ISO/TR 10064-4 : 1998 C1 2006 | Identical |
BS ISO/TR 10064-4:1998 | Identical |
DIN ISO 14635-2:2010-01 | Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004) |
11/30229116 DC : 0 | BS ISO 1328-1 - CYLINDRICAL GEARS - ISO SYSTEM OF TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO CORRESPONDING FLANKS OF GEAR TEETH |
AGMA ISO 1328 2 : 1999 | CYLINDRICAL GEARS - ISO SYSTEM OF ACCURACY - PART 2: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITE DEVIATIONS AND RUNOUT INFORMATION |
05/30128083 DC : DRAFT JAN 2005 | BEVEL GEARS - ISO SYSTEM OF ACCURACY |
ISO/TR 10064-1:2017 | Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks |
DIN ISO 14635-1:2006-05 | Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000) |
AGMA 912 : A | MECHANISMS OF GEAR TOOTH FAILURE |
AGMA 2015-1 : A | ACCURACY CLASSIFICATION SYSTEM - TANGENTIAL MEASUREMENTS FOR CYLINDRICAL GEARS |
AGMA 915-2 : A | INSPECTION PRACTICES - PART 2: CYLINDRICAL GEARS - RADIAL MEASUREMENTS |
VDI/VDE 2613:2003-12 | Pitch and runout testing on gearings - Cylindrical gears, whormwheels, bevel gears |
VDI/VDE 2609:2000-10 | Determination of tooth contact patterns for gearings |
PD ISO/TR 10064-6:2009 | Code of inspection practice Bevel gear measurement methods |
BS ISO 1328-1:2013 | Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values of deviations relevant to flanks of gear teeth |
04/30112988 DC : DRAFT APR 2004 | ISO 14635-3 - GEARS - FZG TEST PROCEDURES - FZG TEST METHOD A/2.8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES |
05/30134748 DC : DRAFT JUNE 2005 | ISO 14521 - GEARS - CALCULATION OF LOAD CAPACITY OF WORMGEARS |
BS ISO 14635-3:2005 | Gears. FZG test procedures FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
AGMA ISO 17485 : A | BEVEL GEARS - ISO SYSTEM OF ACCURACY |
ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
PD ISO/TR 14521:2010 | Gears. Calculation of load capacity of wormgears |
BS 436-5:1997 | Spur and helical gears Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
PD ISO/TR 10064-1:2017 | Code of inspection practice Measurement of cylindrical gear tooth flanks |
BS ISO TR 10064-2:1996 | Code of inspection practice Inspection related to radial composite deviations, runout, tooth thickness and backlash |
ISO/TR 10064-6:2009 | Code of inspection practice Part 6: Bevel gear measurement methods |
ISO/TR 10064-2:1996 | Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
ISO 81400-4:2005 | Wind turbines Part 4: Design and specification of gearboxes |
ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
ISO 14635-2:2004 | Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils |
ISO 14635-3:2005 | Gears — FZG test procedures — Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
ISO 17485:2006 | Bevel gears ISO system of accuracy |
EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
DIN ISO 14635-3:2011-08 | Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005) |
BS ISO 17485:2006 | Bevel gears. ISO system of accuracy |
BS ISO TR 10064-3:1996 | Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
BS ISO 81400-4:2005 | Wind turbines Design and specification of gearboxes |
ISO/TR 14521:2010 | Gears Calculation of load capacity of wormgears |
BS ISO 13691 : 2001 AMD 14307 | PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
ISO 1328-2:1997 | Cylindrical gears ISO system of accuracy Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
ISO 701:1998 | International gear notation Symbols for geometrical data |
AGMA 2000 : A | GEAR CLASSIFICATION AND INSPECTION HANDBOOK - TOLERANCES AND MEASURING METHODS FOR UNASSEMBLED SPUR AND HELICAL GEARS (INCLUDING METRIC EQUIVALENTS) |
ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 1: Flash temperature method |
ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
ISO/TR 13989-2:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 2: Integral temperature method |
ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
ISO/TR 10064-2:1996 | Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
ISO 13281:1997 | Industrial automation systems Manufacturing Automation Programming Environment (MAPLE) Functional architecture |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
ISO 53:1998 | Cylindrical gears for general and heavy engineering Standard basic rack tooth profile |
ISO 54:1996 | Cylindrical gears for general engineering and for heavy engineering — Modules |
ISO/TR 10064-1:2017 | Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks |
US$150.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.