MIL BULL 343 : A
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF
Withdrawn date
07-23-2013
Publisher
Covers documents applicable to aircraft engines and propellers.
| DocumentType |
Standard
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Withdrawn
|
| MIL-E-5007 Revision D:1973 | ENGINE, AIRCRAFT, TURBOJET AND TURBOFAN, GENERAL SPECIFICATION FOR |
| MS33509 Revision A:1953 | ADAPTOR INSTALLATION TYPE XII OR XVI DRIVE STARTER JAW |
| SAE AMS 5689 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED |
| SAE AS 963 : 2001 | DRIVE - STUDDED, ACCESSORY, 5.000 BC ROUND, DESIGN STANDARD FOR |
| SAE ARP 755 : 2014 | AIRCRAFT PROPULSION SYSTEM PERFORMANCE STATION DESIGNATION AND NOMENCLATURE |
| WW-H-1053 Revision A:1987 | HOSE, METAL (FLEXIBLE, ALUMINUM ALLOY, CORROSION RESISTANT AND HEAT RESISTANT STEEL) |
| AND10050 Revision 21:2005 | BOSSES, STRAIGHT DIMENSIONS FOR GASKET SEAL STRAIGHT THREAD |
| MIL-M-45202 Revision C:1981 | MAGNESIUM ALLOY, ANODIC TREATMENT OF |
| MIL C 16173 : E | CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
| MIL-E-25109 Base Document:1955 | ENGINES, AIRCRAFT, RECIPROCATING, GENERAL SPECIFICATION FOR |
| SAE ARP 373C : 2012(S2018) | PROPELLER SHAFT TORQUE RATINGS |
| MS33540 Revision J:1986 | SAFETY WIRING AND COTTER PINNING, GENERAL PRACTICES FOR |
| MIL P 6074 : A | PRESERVATION, PACKAGING AND PACKING OF PROPELLERS, PROPELLER SPARES AND PROPELLER ACCESSORIES |
| MS33787 Revision D:1984 | WRENCHING ELEMENT, EXTERNAL SPLINE, DIMENSIONS FOR |
| MIL I 27686 : F | INHIBITOR, ICING, FUEL SYSTEM |
| SAE AS 127 : 2012 | PROPELLOR SHAFT END, FLANGED TYPE - NO.1, 2, 3, 4, 5 & 6 |
| SAE AS 848 : 2012 | ATTACHMENT POINTS, ENGINE, REMOTE TRIMMING MAIN FUEL CONTROL |
| MIL-E-5607 Revision F:1983 | ENGINE, GAS TURBINE, PREPARATION FOR STORAGE AND SHIPMENT OF, PROCESS FOR |
| MIL L 7808 : K (1) | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-A-25175 Revision C:1976 | AIR TRANSPORT, NONTACTICAL, PACKING FOR |
| MIL-STD-280 Revision A:1969 | DEFINITIONS OF ITEM LEVELS, ITEM EXCHANGEABILITY, MODELS, AND RELATED TERMS |
| O-A-548 Revision D:1974 | ANTIFREEZE COOLANT, ENGINE, ETHYLENE GLYCOL, INHIBITED, CONCENTRATED |
| MIL C 3702 : B | CABLE, POWER, ELECTRICAL, IGNITION, HIGH TENSION |
| MS9826 Revision B:2007 | CLAMP, LOOP-CUSHIONED, JOGGLED, CORROSION RESISTANT STEEL, .265 HOLE |
| SAE AMS 2645 : 1995 | FLUORESCENT PENETRANT INSPECTION |
| MIL-I-8599 Revision B:1975 | INSTALLATION OF RECIPROCATING ENGINE INDUCTION AIR FILTERS, DESIGN REQUIREMENTS FOR |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MS33786 Revision B:2013 | Fitting, Installation, Flared Tube and Hose, Swivel |
| AND20002 Revision 3:1953 | DRIVE - TYPE 12 ENGINE ACCESSORY |
| MIL-T-6736 Revision B:1965 | TUBING, CHROME MOLYBDENUM 4130 STEEL, SEAMLESS, AIRCRAFT QUALITY [ASG] |
| SAE ARP 1179 : 2011 | AIRCRAFT GAS TURBINE ENGINE EXHAUST SMOKE MEASUREMENT |
| SAE AS 972 : 1977 | SPLINE DETAILS, ACCESSORY DRIVES AND FLANGES |
| MIL-STD-704 Revision F:2004 | AIRCRAFT ELECTRIC POWER CHARACTERISTICS |
| MS3325 Base Document:1968 | DRIVE PAD-ACCESSORY, 2.653 BC SQUARE, DESIGN STANDARD FOR |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| MIL-P-26366 Revision A:1962 | PROPELLER SYSTEMS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MS9139 Base Document:1965 | GASKET TYPE XVI, XVII-C, -D, -E, AND -F, ENGINE ACCESSORY DRIVE |
| MIL-P-7105 Revision B:1965 | PIPE THREADS, TAPER, AERONAUTICAL NATIONAL FORM, SYMBOL ANPT. GENERAL REQUIREMENTS FOR |
| MIL-P-149 Revision D:1984 | PLASTIC COATING COMPOUND, STRIPPABLE [HOT DIPPING] |
| MS33658 Revision A:1959 | FITTING END, HOSE CONNECTION, STANDARD DIMENSIONS FOR |
| AND20000 : REV 4 | DRIVE - TYPE X ENGINE ACCESSORY |
| MIL-D-3464 Revision E:1987 | DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION |
| MS28034 Revision B:2007 | BULBS, TEMPERATURE, ELECTRICAL RESISTANCE (-70 DEGREES C TO +300 DEGREES C) |
| MIL-T-6845 Revision D:1985 | TUBING, STEEL, CORROSION-RESISTANT (304) AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION |
| MIL HDBK 106 : 0 | MULTI LEVEL CONTINUOUS SAMPLING PROCEDURES AND TABLE FOR INSPECTION BY ATTRIBUTES (HANDBOOK H 106) |
| MIL H 27267 : B | HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE |
| MS9136 Base Document:1965 | GASKET TYPE XII, XIV-A, XIV-B, XIV-E, XVII-A AND XVII-B ENGINE ACCESSORY DRIVE |
| MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
| MS20002 Revision E:1972 | WASHER, COUNTERSUNK AND PLAIN, HIGH STRENGTH |
| MS8009 Revision D:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLANGE-TO-FLANGE |
| MIL-C-5040 Revision H:1994 | Cord, Fibrous, Nylon |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MS8002 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLANGE |
| MIL-M-3171 Revision C:1966 | MAGNESIUM ALLOY PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION |
| MIL-T-8808 Revision B:1981 | TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY |
| MIL-B-26195 Revision C:1987 | BOXES, WOOD CLEATED, SKIDDED, LOAD BEARING BASE |
| MIL-STD-480 Revision B:1988 | CONFIGURATION CONTROL - ENGINEERING CHANGES, DEVIATIONS AND WAIVERS |
| MIL-STD-410 Revision E:1991 | NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATION AND CERTIFICATION (EDDY CURRENT, LIQUID PENETRANT, MAGNETIC PARTICLE, RADIOGRAPHIC AND ULTRASONIC) |
| MIL H 25579 : E | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, HIGH TEMPERATURE MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL I 6866 : B | INSPECTION, PENETRANT METHOD OF |
| MS9138 Base Document:1965 | GASKET TYPE XIV-C AND XIV-D ENGINE ACCESSORY DRIVE |
| MS8004 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLANGE-TO-FLANGE |
| RR-C-271 Revision G:2016 | CHAINS AND ATTACHMENTS, CARBON AND ALLOY STEEL |
| SAE AMS 5643 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| MIL-V-5635 Revision A:1966 | VIBRATOR, IGNITION COIL AIRCRAFT ENGINE STARTING, TYPE AN4181 |
| MS5011 Revision A:1981 | NUT-PROPELLER HUB RETAINING (NON CONTROLLABLE TYPE) |
| SAE AMS 5743 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED |
| MIL STD 473 : LATEST | MAINTAINABILITY VERIFICATION/DEMONSTRATION/EVALUATION FOR AERONAUTICAL SYSTEMS |
| MIL STD 1557 : A NOTICE 3 | DESIGNATION OF AIRCRAFT PROPULSION RECIPROCATING ENGINES |
| MIL-S-8503 Revision B:1978 | STEEL BARS, CHROME-VANADIUM (6150) AIRCRAFT QUALITY |
| MS 27423 : A | PROTECTOR PROPELLER SHAFT, PLASTIC |
| MS9135 Base Document:1965 | GASKET, TYPE XI ENGINE ACCESSORY DRIVE |
| MS9137 Base Document:1965 | GASKET TYPE XIII ENGINE ACCESSORY DRIVE |
| MIL T 5624 : R | TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
| MIL-C-38373 Revision B:1975 | CAP, FLUID TANK FILLER |
| MS3326 Base Document:1968 | DRIVE PAD - ACCESSORY, 5,000 BC SQUARE, DESIGN STANDARD FOR |
| MIL-C-5545 Revision C:1983 | CORROSION PREVENTIVE, AIRCRAFT ENGINE, HEAVY OIL TYPE |
| MIL-C-6529 Revision C:1958 | CORROSION PREVENTIVE, AIRCRAFT ENGINE |
| SAE AS 959 : 2001 | DRIVE - STUDDED, ACCESSORY, 2.653 BC SQUARE, DESIGN STANDARD FOR |
| MIL-E-6051 Revision D:1967 | ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS, SYSTEM |
| QQ-W-423 Revision B:1969 | FEDERAL SPECIFICATION - WIRE, STEEL, CORROSION RESISTING |
| MS9006 Revision C:1963 | RECESSES-CROSS, LOW TORQUE DRIVE, DIMENSIONS AND GAGE DIMENSIONS FOR |
| MIL S 5002 : D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| SAE ARP 1153 : 2014 | METHOD FOR DETERMINING RELATIVE SPECIFIC GRAVITY POLYTETRAFLUOROETHYLENE TUBING |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE |
| MS3329 Revision A:1969 | DRIVE PAD - ACCESSORY, 10,000 BC ROUND, DESIGN STANDARD FOR |
| MS8000 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLARE |
| MS3328 Revision A:1969 | DRIVE PAD - ACCESSORY, 8,000 BC ROUND, DESIGN STANDARD FOR |
| MIL-D-70327 Base Document:1959 | DRAWINGS, ENGINEERING AND ASSOCIATED LISTS |
| SAE ARP 1256 : 2011 | PROCEDURE FOR THE CONTINUOUS SAMPLING AND MEASUREMENT OF GASEOUS EMISSIONS FROM AIRCRAFT TURBINE ENGINES |
| SAE AS 291 : 2014 | SURFACE TEXTURE, ROUGHNESS, WAVINESS AND LAY |
| MIL-L-8937 Revision D:1982 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, [NATO CODE NUMBER S 1738] |
| MS51938 Revision C:1991 | SEAL, METALLIC, LEAD & WIRE |
| MIL F 27272 : B | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| MS33678 Revision A:2004 | CONNECTOR, RECEPTACLE, ELECTRICAL, INTEGRAL MOUNTING |
| MS8005 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLARE |
| MIL-STD-1529 Base Document:1955 | VENDOR SUBSTANTABLE FOR AEROSPACE PROPULSION SYSTEM ITEMS |
| AND10065 Revision 2:1946 | CONNECTION ASSEMBLY - FLEXIBLE, FLUID, STANDARD DESIGN OF |
| MIL B 121 : F | BARRIER MATERIAL, GREASEPROOFED, WATERPROOFED, FLEXIBLE |
| TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
| SAE ARP 492 : 2014 | AIRCRAFT ENGINE FUEL PUMP CAVITATION ENDURANCE TEST |
| MIL E 5009 : D | |
| MIL T 6735 : A | TUBING, CHROME-MOLYBDENUM, 4135 STEEL, SEAMLESS AIRCRAFT QUALITY |
| MIL-T-5021 Revision D:1969 | MILITARY SPECIFICATION. TESTS; AIRCRAFT AND MISSILE WELDING OPERATORS' QUALIFICATION |
| PPP-T-60 Revision E:1986 | TAPE, PACKAGING, WATERPROOF |
| MIL C 7024 : D | CALIBRATING FLUID, AIRCRAFT FUEL SYSTEM COMPONENTS |
| AND20004 : NOTICE 1 | DRIVE - TYPE XIV ENGINE ACCESSORY |
| MS33656 Revision J:1987 | FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL |
| MIL-STD-831 Base Document:1963 | TEST REPORTS, PREPARATION OF |
| SAE AS 961 : 2001 | DRIVE - STUDDED, ACCESSORY, 5.000 BC SQUARE, DESIGN STANDARD FOR |
| QQ-C-320 Revision B:1974 | CHROMIUM PLATING (ELECTRODEPOSITED) |
| MIL-STD-453 Revision C:1984 | INSPECTION, RADIOGRAPHIC |
| MIL-STD-838 Revision C:1983 | LUBRICATION OF MILITARY EQUIPMENT |
| SAE AS 870 : 2015 | WRENCHING CONFIGURATION, BI-HEXAGONAL (12 POINT) DRIVE, DESIGN STANDARD FOR |
| SAE AS 970 : 1993 | DRIVE - ACCESSORY, 8.000 BC ROUND, QAD, DESIGN STANDARD FOR |
| SAE AS 967 : 1993 | DRIVE - STUDDED, ACCESSORY, 10.000 BC ROUND, DESIGN STANDARD FOR |
| MS5007 Revision A:1981 | CONE, PROPELLER HUB, FRONT |
| TT-T-548 Revision F:1991 | TOLUENE, TECHNICAL |
| MS8007 Revision D:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLANGE |
| MS27379 Revision A:1969 | ADAPTER, FLUID TANK FILLER |
| MS33588 Revision E:1984 | NUTS, SELF LOCKING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY USAGE REQUIREMENTS FOR |
| MIL-E-8593 Revision A:1975 | ENGINE, AIRCRAFT, TURBOPROP, GENERAL SPECIFICATION FOR [ASG] |
| TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON |
| MIL-S-7886 Revision B:1962 | SPARK PLUG, SHIELDED, AIRCRAFT RECIPROCATING ENGINE, GENERAL SPECIFICATION FOR |
| AND10152 Revision 3:1953 | SHAFT ENDS - PROPELLER |
| MS20995 Revision E:1974 | WIRE, SAFETY OR LOCK |
| VV-P-236 Revision A:1977 | PETROLATUM, TECHNICAL |
| MIL L 6081 : C | LUBRICATING OIL, JET ENGINE |
| MIL-S-5626 Revision C:1968 | STEEL, CHROME MOLYBDENUM [4140] BARS, RODS, AND FORGING STOCK FOR AIRCRAFT APPLICATION |
| MIL-G-5572 Revision F:1969 | GASOLINE, AVIATION, GRADES 80/87, 100/130, 115/145 |
| SAE AS 969 : 1993 | DRIVE - ACCESSORY, 8.000 BC ROUND, QAD, DESIGN STANDARD FOR |
| MS33537 Revision E:1974 | INSERT, SCREW THREAD, HELICAL COIL, COARSE AND FINE THREAD, STANDARD DIMENSIONS FOR |
| MIL-P-26367 Revision A:1966 | PROPELLER SYSTEMS, AIRCRAFT, MODEL SPECIFICATION FOR (OUTLINE AND INSTRUCTIONS FOR PREPARATION) |
| MIL-E-5007 Revision D:1973 | ENGINE, AIRCRAFT, TURBOJET AND TURBOFAN, GENERAL SPECIFICATION FOR |
| MS8003 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLANGE |
| AN4076 : REV 4 NOTICE 4 | FITTING AND ENGINE CYLINDER HEAD TEMPERATURE MEASURING ELEMENT |
| MIL P 7936 : LATEST | PARTS AND EQUIPMENT, AERONAUTICAL, PREPARATION FOR DELIVERY |
| MIL E 5008 : B | |
| IEC 60225:1966 | Octave, half-octave and third-octave band filters intended for the analysis of sounds and vibrations |
| MIL-STD-143 Revision B:1969 | STANDARDS, AND SPECIFICATIONS ORDER OF PRECEDENCE FOR THE SELECTION OF |
| MIL E 25110 : NOTICE 3 | ENGINES, AIRCRAFT, RECIPROCATING, MODEL SPECIFICATION FOR |
| RR-W-365 Revision A:1980 | WIRE FABRIC (INSECT SCREENING) |
| MIL-STD-882 Revision E:2012 | System Safety |
| MIL T 25524 : D | TURBINE FUEL, AVIATION, THERMALLY STABLE |
| MIL B 131 : H | BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| MIL-I-6868 Revision E:1976 | INSPECTION PROCESS, MAGNETIC PARTICLE |
| MS8001 Revision E:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, REUSABLE FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLARELESS |
| MIL-B-7883 Revision B:1968 | BRAZING OF STEELS, COPPER, COPPER ALLOYS, NICKEL ALLOYS, ALUMINUM AND ALUMINUM ALLOYS |
| NAS618:2010 | FASTENER - RECOMMENDED SHANK, HOLE AND HEAD-TO-SHANK FILLET RADIUS LIMITS FOR |
| MIL-S-8879 Revision C:1991 | SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR |
| ASTM D 1457 : 1992 | Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
| MS8008 Revision D:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLANGE |
| MIL-P-514 Revision D:1966 | PLATE, IDENTIFICATION, INSTRUCTION AND MARKING BLANK |
| MS33587 Revision B:1972 | TRANSMITTER INSTALLATION CLEARANCE, FUEL AND OIL PRESSURE |
| MIL-STD-1559 Revision A:1984 | NUMBERS, SERIAL, AIRCRAFT GAS TURBINE ENGINE AND ENGINE MODULE ASSIGNMENT OF |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL-L-22851 Revision D:1990 | LUBRICATING OIL, AIRCRAFT PISTON ENGINE, (ASHLESS DISPERSANT) |
| MIL-F-5509 Revision D:1978 | FITTING, FLARED TUBE, FLUID CONNECTION |
| MIL W 25038 : F | WIRE, ELECTRICAL, HIGH TEMP, FIRE RESISTANT, AND FLIGHT CRITICAL, GENERAL SPECIFICATION FOR |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT |
| MIL-STD-794 Revision E:1982 | PART AND EQUIPMENT, PROCEDURES FOR PACKAGING AND PACKING OF |
| MIL T 9107 : LATEST | TEST REPORTS, PREPARATION OF |
| SAE AMS 3380E : 2012 | HOSE, POLYTETRAFLUOROETHYLENE TFE FLUOROCARBON RESIN, WIRE BRAID REINFORCED |
| MIL-C-5584 Revision D:1988 | CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE |
| MS18069 Revision B:1985 | COMPOUND, ADHESIVE AIRCRAFT DESIGN AND USE LIMITATIONS FOR THREADED COMPONENTS RETAINED SEALED OR LOCKED BY |
| MIL-STD-100 Revision G:1997 | ENGINEERING DRAWINGS |
| MIL I 26600 : LATEST | INTERFERENCE CONTROL REQUIREMENTS, AERONAUTICAL EQUIPMENT |
| MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF |
| MIL E 5556 : LATEST | |
| MIL-L-6082 Revision E:1990 | LUBRICATING OIL, AIRCRAFT PISTON ENGINE (NONDISPERSANT MINERAL OIL) |
| AND20005 Revision 4:1976 | DRIVE - TYPE XV ENGINE ACCESSORY |
| MIL-S-5000 Revision E:1982 | STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS AND REFORGING STOCK |
| PPP-B-601 Revision H:1989 | BOXES, WOOD, CLEATED PLYWOOD |
| MIL E 6058 : B NOTICE 1 | ENGINE, AIRCRAFT, RECIPROCATING, PREPARATION FOR SHIPMENT AND STORAGE OF |
| MIL-S-6758 Revision B:1993 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| SAE ARP 502 : 2012 | PROPELLER SHAFT ENDS - FLANGED SMALL AIRCRAFT ENGINE |
| MIL STD 879 : A NOTICE 2 | DESIGNATION OF AIRCRAFT PROPULSION GAS TURBINE ENGINES |
| MIL C 5015 : G | CONNECTOR, ELECTRICAL, CIRCULAR THREADED AN TYPE, GENERAL SPECIFICATION FOR |
| MIL-STD-726 Revision H:1985 | PACKAGING REQUIREMENTS CODE |
| MIL-I-26860 Revision B:1972 | INDICATOR, HUMIDITY, PLUG, COLOR CHANGE |
| TT-I-735 Revision A:1963 | ISOPROPYL ALCOHOL |
| AND10049 : 0003 | BOSSES - FLUID CONNECTION, INTERNAL STRAIGHT THREAD |
| MIL-STD-462 Revision D:1993 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS |
| MS5008 Revision D:1996 | CONE, PROPELLER HUB, REAR |
| MIL T 713 : E | TWINE, FIBROUS, IMPREGNATED, LACING AND TYING |
| SAE AS 971 : 1993 | DRIVE - ACCESSORY, 10.000 BC ROUND, QAD, DESIGN STANDARD FOR |
| SAE AS 1132 : 2016 | BOLTS, SCREWS AND NUTS - EXTERNAL WRENCHING UNJ THREAD, INCH - DESIGN STANDARD |
| MIL G 26611 : D | GENERATOR, TACHOMETER GEU-7/A, MINIATURE |
| SAE AS 681 : 2016 | GAS TURBINE ENGINE PERFORMANCE PRESENTATION FOR COMPUTER PROGRAMS |
| QQ-W-343 Revision G:1997 | WIRE, ELECTRICAL, COPPER (UNINSULATED) |
| QQ-P-416 Revision F:1991 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| MS33666 Revision C:1975 | PACKING, PREFORMED AERONAUTICAL, ELASTOMERIC, RANGE OF SIZES (ASG) |
| MIL-H-775 Revision E:1987 | HOSE, RUBBER OR FABRIC (INCLUDING TUBING); AND FITTINGS, NOZZLES AND STRAINERS, PACKAGING OF |
| MIL-STD-721 Revision C:1981 | DEFINITIONS OF EFFECTIVENESS TERMS FOR RELIABILITY MAINTAINABILITY, HUMAN FACTORS, AND SAFETY |
| MIL I 25017 : E | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (METRIC) |
| MIL-F-7194 Revision C:1981 | FILTER, RECIPROCATING ENGINE, INDUCTION AIR, AIRCRAFT |
| MIL-G-3056 Revision F:1991 | GASOLINE, AUTOMOTIVE, COMBAT |
| FED-STD-791 Revision D:2007 | TESTING METHOD OF LUBRICANTS, LIQUID FUELS, AND RELATED PRODUCTS |
| MS 26531 : LATEST | VIBRATION TEST RIG |
| MIL I 6865 : LATEST | INSPECTION, RADIOGRAPHIC |
| PPP-B-621 Revision D:1981 | BOXES, WOOD, NAILED AND LOCK CORNER |
| MS3327 Revision A:1969 | DRIVE PAD - ACCESSORY, 5,000 BC, ROUND, DESIGN STANDARD FOR |
| SAE AMS5644E:1964(S2017) | STEEL, BARS AND FORGINGS, CORROSION RESISTANT, 17CR - 7NI - 1AL |
| MS9825 Revision A:1972 | CLAMP, LOOP-CUSHIONED, JOGGLED, CORROSION-RESISTING STEEL, .204 HOLE |
| MS33660 Revision D:1999 | TUBING END HOSE CONNECTION, STANDARD DIMENSIONS FOR |
| AND20006 Revision 7:1989 | DRIVE-TYPE 16 ENGINE ACCESSORY |
| MIL-T-5544 Revision C:1991 | THREAD COMPOUND, ANTISEIZE, GRAPHITE-PETROLATUM |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| SAE AS 977 : 2012 | COUPLING - CLAMP, GROOVE V-BAND, FORGED, 6.400, 9.400, 11.400 FLANGE OD |
| AND20007 Revision 1:1953 | DRIVE - TYPE XVII ENGINE ACCESSORY |
| MIL-B-5087 Revision B:1964 | BONDING, ELECTRICAL AND LIGHTING PROTECTION, FOR AEROSPACE SYSTEMS |
| AN4052 Revision 8:2013 | Coupling, Shaft, Rigid |
| MIL-W-5088 Revision L:1991 | Wiring, Aerospace Vehicle (Future Design Should Refer to SAE-AS50881) |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| MS27417 Revision A:2009 | CAP - PROPELLER SHAFT THREAD, SHIPPING |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| NN-P-530 Revision E:1977 | PLYWOOD, FLAT PANEL |
| AND10305 Revision 5:1949 | INSTALLATION CLEARANCE - TYPE 12 AND TYPE 17 DRIVE (GENERATOR - POWER TAKE-OFF) |
| MS9144 Revision A:1962 | GASKET TYPE XX ENGINE ACCESSORY DRIVE |
| QQ-N-290 Revision A:1971 | NICKEL PLATING (ELECTRODEPOSITED) |
| IEC 60179:1973 | Precision sound level meters |
| MIL L 21260 : D | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
| MS9134 Base Document:1965 | GASKET TYPE X OR XV ENGINE ACCESSORY DRIVE |
| SAE AS 965 : 1993 | DRIVE - STUDDED, ACCESSORY, 8.000 BC ROUND, DESIGN STANDARD FOR |
| O-E-760 Revision D:1987 | ETHYL ALCOHOL (ETHANOL), DENATURED ALCOHOL, PROPRIETARY SOLVENTS & SPECIAL INDUSTRIAL SOLVENTS |
| MIL E 25112 : 0 | ENGINE, AIRCRAFT, RECIPROCATING, ACCEPTANCE TESTS FOR |
| MS8006 Revision D:2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLARELESS |
| MIL-F-7179 Revision G:1993 | FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM |
| PPP-B-640 Revision D:1966 | BOX, FIBERBOARD, CORRUGATED, TRIPLE-WALL |
| MIL-S-6049 Revision A:1967 | STEEL, CHROME NICKEL MOLYBDENUM [8740] BARS, RODS AND FORGING STOCK FOR AIRCRAFT APPLICATION |
| MS5009 Revision A:1981 | RING, RETAINING - PROPELLER HUB, SNAP |
| MIL E 25113 : NOTICE 3 | ENGINE, AIRCRAFT, RECIPROCATING, PRELIMINARY FLIGHT RATING TEST FOR |
| MS33602 Base Document:1967 | BOLT, SELF RETAINING AIRCRAFT RELIABILITY AND MAINTAINABILITY DESIGN AND USAGE REQUIREMENTS FOR |
| MIL X 6141 : LATEST | X-RAY LABORATORY, PROCEDURE FOR CERTIFICATION |
| MIL-S-7742 Revision D:1991 | SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES, GENERAL SPECIFICATION FOR |
| MS33668 Revision B:1975 | PACKING, PREFORMED, ELASTOMERIC, TUBE FITTING, RANGE OF SIZES |
| SAE AMS 2640 : 1996 | MAGNETIC PARTICLE INSPECTION |
| O-M-232 Revision M:2016 | METHANOL (METHYL ALCOHOL) |
| MIL-B-23964 Revision D:1981 | BOLT, SELF-RETAINING, POSITIVE LOCKING |
| MS21125 Revision F:1983 | BOLT SELF RETAINING POSITIVE LOCKING CRES 90 KSI FSU 63 KSI FTU PAN HEAD 450 DEG F & 650 DEG F |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.