|
ASTM A 967 : 2007-07
|
SPECIFICATION FOR CHEMICAL PASSIVATION TREATMENTS FOR STAINLESS STEEL PARTS |
|
MIL STD 202-210 : 0
|
METHOD 210, RESISTANCE TO SOLDERING HEAT |
|
MIL STD 202-112 : 0
|
METHOD 112, SEAL |
|
MIL STD 202-208 : 0
|
METHOD 208, SOLDERABILITY |
|
SAE AMS QQ S 763 : 2015
|
STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
|
MIL STD 202-213 : 0
|
METHOD 213, SHOCK (SPECIFIED PULSE) |
|
ASTM B 221 : 2014 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
|
MIL STD 202-106 : 0
|
METHOD 106, MOISTURE RESISTANCE |
|
ASTM B 241/B241M : 2016 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
|
MIL PRF 23586 : F
|
SEALING COMPOUND (WITH ACCELERATOR), SILICONE RUBBER, ELECTRICAL |
|
MIL STD 202-211 : 0
|
METHOD 211, TERMINAL STRENGTH |
|
SAE AMS QQ A 250 B : 2012(S2018)
|
ALUMINUM AND ALUMINUM ALLOY, PLATE AND SHEET GENERAL SPECIFICATION FOR |
|
MIL DTL 5541 : F
|
CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
|
MIL PRF 39012 : F
|
CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
|
ASTM A 240/A240M : 2017-11
|
SPECIFICATION FOR CHROMIUM AND CHROMIUM-NICKEL STAINLESS STEEL PLATE, SHEET, AND STRIP FOR PRESSURE VESSELS AND FOR GENERAL APPLICATIONS |
|
SAE AMS QQ N 290 : 2015
|
NICKEL PLATING (ELECTRODEPOSITED) |
|
MIL DTL 45204 : D
|
GOLD PLATING, ELECTRODEPOSITED |
|
MIL DTL 14072 : F
|
FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
|
SAE AMS 2404 : 2013
|
PLATING, ELECTROLESS NICKEL |
|
MIL PRF 22750 : G
|
COATING, EPOXY, HIGH-SOLIDS |
|
MIL A 8625 : F
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
|
ASTM B 700 : 2008
|
SPECIFICATION FOR ELECTRODEPOSITED COATINGS OF SILVER FOR ENGINEERING USE |
|
ASTM A 693 : 2016 : REDLINE
|
Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
|
FED STD H28 : A
|
SCREW THREAD STANDARDS FOR FEDERAL SERVICES |
|
MIL STD 202-107 : 0
|
METHOD 107, THERMAL SHOCK |
|
MIL STD 202 : H
|
ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
|
MIL STD 202-204 : 0
|
METHOD 204, VIBRATION, HIGH FREQUENCY |
|
ASTM B 124/B 124M : 2017-04
|
SPECIFICATION FOR COPPER AND COPPER ALLOY FORGING ROD, BAR, AND SHAPES |
|
ASTM A 582/A582M : 2012
|
SPECIFICATION FOR FREE-MACHINING STAINLESS STEEL BARS |
|
MIL DTL 85 : K
|
WAVEGUIDES, RIGID, RECTANGULAR - GENERAL SPECIFICATION FOR |
|
ASTM A 484/A484M : 2016-01
|
SPECIFICATION FOR GENERAL REQUIREMENTS FOR STAINLESS STEEL BARS, BILLETS, AND FORGINGS |
|
ASTM B 121/B121M : 2016 : REDLINE
|
Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
|
ASTM B 545 : 2013 : REDLINE
|
Standard Specification for Electrodeposited Coatings of Tin |
|
MIL DTL 3922 : E
|
FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR |
|
MIL STD 461 : G
|
REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
|
SAE AMS 2700E : 2011
|
PASSIVATION OF CORROSION RESISTANT STEELS |
|
ASTM B 36/B36M : 2013-10
|
SPECIFICATION FOR BRASS PLATE, SHEET, STRIP, AND ROLLED BAR |
|
ASTM B 488 : 2012-01
|
SPECIFICATION FOR ELECTRODEPOSITED COATINGS OF GOLD FOR ENGINEERING USES |
|
MIL STD 202-110 : 0
|
METHOD 110, SAND AND DUST |
|
MIL STD 889 : C
|
DISSIMILAR METALS |
|
MIL STD 202-215 : 0
|
METHOD 215, RESISTANCE TO SOLVENTS |
|
ANSI/NCSL Z540 3 : 2006(R2013)
|
REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
|
SAE AMS 2422 : 2014
|
PLATING, GOLD |
|
ASTM B 339 : 2012 : REDLINE
|
Standard Specification for Pig Tin |
|
SAE AMS QQ A 200 : 2004
|
ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR |
|
MIL STD 202-104 : 0
|
METHOD 104, IMMERSION |
|
ASTM B 16/B16M : 2010
|
SPECIFICATION FOR FREE-CUTTING BRASS ROD, BAR AND SHAPES FOR USE IN SCREW MACHINES |
|
MIL STD 202-101 : 0
|
METHOD 101, SALT ATMOSPHERE (CORROSION) |
|
MIL HDBK 454 : B
|
GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
|
ASTM B 209 : 2014 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
|
MIL STD 1285 : D
|
MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
|
SAE AMS I 23011:2012(S2017)
|
IRON-NICKEL ALLOYS FOR SEALING TO GLASSES AND CERAMIC |
|
MIL STD 202-109 : 0
|
METHOD 109, EXPLOSION |
|
ASTM A 666 : 2015 : REDLINE
|
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
|
MIL STD 202-105 : 0
|
METHOD 105, BAROMETRIC PRESSURE (REDUCED) |
|
MIL STD 810 : G
|
ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
|
ASTM G 21 : 2015 : REDLINE
|
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |