Fittings, Hydraulic Tube, Sleeve, Double Angle

Amended by

MIL-DTL-32371-10 Notice 1 - Validation:2018

Available format(s)

PDF

Published date

04-24-2012

Publisher

US Military Specs/Standards/Handbooks

DevelopmentNote	NOTICE 1 - Notice of Validation. (03/2018)
DocumentType	Standard
Pages	7
ProductNote	NEW CHILD NOT 1 2018 IS NOW ADDED
PublisherName	US Military Specs/Standards/Handbooks
Status	Current

MIL-DTL-32464 Revision A:2017

FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR

SAE AMS 2486 : 2010	CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE
SAE AMS 5645 : 2016	STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE AMS QQ P 416 : 2016	PLATING, CADMIUM (ELECTRODEPOSITED)
SAE AMS 2488 : 2000	ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
SAE AS 5176 : 2015	FITTING, SLEEVE, FLARED
MIL-DTL-16232 Revision G:2000	PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE
SAE AMS 6382 : 2014	STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED
SAE AS 1708 : 2017	FITTING END, INTERNAL FLARE, DESIGN STANDARD
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AMS 5648 : 2016	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
MIL-DTL-81706 Revision B:2004	Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys
SAE AMS 2417 : 2013	PLATING, ZINC-NICKEL ALLOY
SAE AMS 5646 : 2014	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
SAE AMS C 81562 : 1998	COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED)
MIL-DTL-32371 Base Document:2012	Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
SAE AMS 2451/9 : 2012	PLATING, BRUSH, ZINC-NICKEL, LOW HYDROGEN EMBRITTLEMENT
SAE AMS 2700E : 2011	PASSIVATION OF CORROSION RESISTANT STEELS
SAE AMS 5639 : 2017	STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
SAE AMS 6370 : 2016	STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
SAE AS 478 : 2015	IDENTIFICATION MARKING METHODS
SAE AMS 4928 : 2016	TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED