|
MIL DTL 6162 : C
|
GENERATORS AND STARTER-GENERATORS, ELECTRICAL DIRECT CURRENT, NOMINAL 30 VOLTS, AIRCRAFT GENERAL SPECIFICATION FOR |
|
SAE AS 83248/1 : 2016
|
O-RING MOLDED FROM AMS7276 MATERIAL |
|
DOD PRF 85734 : A
|
LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE |
|
BS ISO 8068:2006
|
Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines |
|
MIL DTL 83723/27 : C
|
CONNECTORS, ELECTRICAL, BACKSHELL, WITH HEAT-SHRINKABLE STRAIN-RELIEF BOOT (STRAIGHT AND RIGHT ANGLE), THREADED COUPLING |
|
05/30098184 DC : DRAFT MAY 2005
|
ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
|
MIL PRF 81733 : D
|
SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
|
MIL PRF 32239 : A
|
COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS |
|
SAE AMS 3266 : 2017
|
SEALING COMPOUND, POLYTHIOETHER ELASTOMERIC TWO-PART ELECTRICALLY CONDUCTIVE |
|
16/30350072 DC : 0
|
BS EN 3155-024 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
MIL PRF 7808 : L
|
LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
|
BS EN 4814 : 2017
|
AEROSPACE SERIES - FLANGE COUPLINGS UP TO 21000 KPA - TECHNICAL SPECIFICATION - INCH SERIES |
|
17/30371341 DC : 0
|
PREN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMATE FREE PRIMER FOR MILITARY APPLICATION |
|
P W 2891 : A
|
WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
|
DEFSTAN 05-50(PT61)/2(2003) : 2003 AMD 1 2003
|
METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 61: METHODS FOR TESTING GAS TURBINE ENGINE SYNTHETIC LUBRICANTS |
|
09/30208363 DC : 0
|
BS EN 4816 - AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL, TECHNICAL SPECIFICATION, INCH SERIES |
|
MIL PRF 32517 : 0
|
SPLICE, CONDUCTOR, ELECTRICAL, COAXIAL CABLE, MATCHED IMPEDANCE, GENERAL SPECIFICATION FOR |
|
BS EN 4816 : 2017
|
AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL - TECHNICAL SPECIFICATION - INCH SERIES |
|
17/30371343 DC : 0
|
BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
|
SAE AIR 5693 : 2014
|
COMPATIBILITY OF PTFE HOSE ASSEMBLIES WITH TYPICAL FLUIDS FOUND IN AEROSPACE APPLICATIONS |
|
MIL DTL 26482 : H
|
CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, QUICK DISCONNECT, ENVIRONMENT RESISTING, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
|
MIL PRF 46010 : H
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
|
MIL PRF 18148 : D
|
CONNECTORS, ELECTRICAL, AIRCRAFT STORAGE BATTERY - GENERAL SPECIFICATION FOR |
|
MIL PRF 32490 : 0
|
ADDITIVE, LUBRICITY IMPROVER, DIESEL |
|
MIL PRF 81904 : C
|
COATING COMPOUND, THERMAL-INSULATION |
|
I.S. EN 4816:2017
|
AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL - TECHNICAL SPECIFICATION - INCH SERIES |
|
BS EN 3733-001 : 2009
|
AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
|
SAE AMS 3085 : 2016
|
FLUID, REFERENCE FOR TESTING AS5780 HPC CLASS (POLYOL) RESISTANT MATERIAL (ALSO KNOWN AS EASTMAN REFERENCE OIL 300) |
|
JSSG 2009 : A
|
AIR VEHICLE SUBSYSTEMS (JOINT SERVICE SPECIFICATION GUIDE) |
|
SAE AMS 3116 A : 2005
|
PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
|
SAE AS 60491 : 2015
|
SLEEVE, PROTECTION, FOR CABLE AND HARNESS PROTECTION |
|
BS EN 4689:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
MIL DTL 26518 : C
|
CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTANT, 200 DEGREES C AMBIENT TEMPERATURE - GENERAL SPECIFICATION FOR |
|
MIL STD 290 : H
|
PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
|
14/30298727 DC : 0
|
BS EN 3155-024 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
MIL DTL 32234 : 0
|
CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
|
SAE AS 81914 : 2016
|
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
|
MIL PRF 38266 : E
|
TANK AND PUMP UNIT, LIQUID DISPENSING, PORTABLE, PMU-29/E |
|
SAE AS 4958 : 2013
|
PERFORMANCE, NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNJ 16 PITCH THREAD FORM |
|
UNI EN 4689 : 2013
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
MIL PRF 24667 : C
|
COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
|
I.S. EN 6059-303:2017
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
|
MIL DTL 28804 : D
|
CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION CENTER JACKSCREW - GENERAL SPECIFICATION FOR |
|
MIL DTL 49055 : G
|
CABLES, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR |
|
SAE AS 23053 : 2016
|
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
|
MIL PRF 26611 : F
|
GENERATOR, TACHOMETER GEU-7/A, MINIATURE |
|
SAE AMS 3143 : 2016
|
POWDER COATING MATERIAL |
|
MIL DTL 0053030 : B
|
PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE |
|
BS EN 3155-069 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
|
MIL PRF 32348 : 0
|
POWDER COATING, CAMOUFLAGE CHEMICAL AGENT RESISTANT SYSTEMS |
|
UNI EN 4687 : 2013
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
16/30350073 DC : 0
|
BS EN 3155-025 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025 - CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
SAE AS 506 : 2004
|
HIGH TEMPERATURE INSULATED TERMINALS & SPLICES |
|
A A 59620 : A
|
TEST STAND, AIRCRAFT GENERATOR UNITS |
|
MIL STD 342 : A
|
PROCEDURE FOR LUBRICATING OIL FLOW CHECK |
|
SAE ARP 5454 : 2014
|
MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF FINE LUBE FILTER ELEMENTS UTILIZED IN AEROSPACE POWER AND PROPULSION LUBRICATION SYSTEMS |
|
NF EN 3155-068 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
14/30298728 DC : 0
|
BS EN 3155-025 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
17/30371344 DC : 0
|
BS EN 4689 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
I.S. EN 4689:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
MIL DTL 26500 : G
|
CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING OR HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
|
13/30278621 DC : 0
|
BS EN 4165-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
|
MIL DTL 53030 : D
|
PRIMER COATING, EPOXY, WATER BASED, LEAD AND CHROMATE FREE |
|
MIL PRF 8516 : G
|
SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED |
|
MIL STD 3004 : D
|
QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
|
MIL PRF 85285 : E
|
COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
|
MIL DTL 81381 : C
|
WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
|
EN 6059-303 : 2017
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
|
MIL PRF 83870 : C
|
FILTER ELEMENT, DISPOSABLE, 20 MICRON ABSOLUTE, CONSTANT SPEED DRIVE, AIRCRAFT |
|
MIL DTL 38195 : D
|
GENERATOR SET, GAS TURBINE ENGINE, 60 KW 400 HZ, GENERAL PURPOSE |
|
BS EN 4687 : 2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
NF EN 3155-069 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
|
NF EN 3155-067 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
MIL PRF 83383 : F
|
CIRCUIT BREAKERS, REMOTE CONTROL, THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
|
MIL DTL 44054 : C
|
BOTTLE: OIL SAMPLE; WITH CONTAINER, NONAERONAUTICAL |
|
MIL PRF 22750 : G
|
COATING, EPOXY, HIGH-SOLIDS |
|
09/30210064 DC : DRAFT SEP 2009
|
BS EN 4531-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION |
|
SAE AS 81511 : 2016
|
CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
|
MIL PRF 85582 : E
|
PRIMER COATINGS: EPOXY, WATERBORNE |
|
BS EN 4688 : 2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
MIL DTL 25677 : G
|
ADAPTER, CAP, AND NOZZLE, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
|
SAE AS 5729 : 2016
|
O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL |
|
NF EN 3733-001 : 2010
|
AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
|
BS EN 3155-068 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
MIL STD 2161 : C
|
PAINT SCHEMES AND EXTERIOR MARKINGS FOR U.S. NAVY AND MARINE CORPS AIRCRAFT |
|
MIL PRF 81757/17 : 0
|
BATTERY, STORAGE, AIRCRAFT, NICKEL-CADMIUM, HIGH-RATE, TYPE 2, 24-VOLT, 35-AMPERE-HOUR, CHARGE CONTROLLED |
|
SAE AS 1356 : 2012
|
LIFE RAFTS |
|
SAE AS 22759 : 2014
|
WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
|
I.S. EN 4688:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
MIL DTL 3702 : F
|
CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION |
|
MIL DTL 83528 : H
|
GASKETING MATERIAL, CONDUCTIVE, SHIELDING GASKET, ELECTRONIC, ELASTOMER, EMI/RFI GENERAL SPECIFICATION FOR |
|
MIL PRF 23377 : K
|
PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
|
MIL PRF 85322 : C
|
COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
|
MIL STD 2073/1 : E
|
STANDARD PRACTICE FOR MILITARY PACKAGING |
|
MIL PRF 32577 : 0
|
COATING SYSTEM, NONSKID, METALLIC THERMAL SPRAY APPLICATION |
|
UNI EN 4688 : 2013
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
MIL DTL 62548 : C
|
LEAD, IGNITION |
|
SAE AMS 3023 : 2017
|
FLUID, REFERENCE FOR TESTING POLYOL ESTER (AND DIESTER) RESISTANT MATERIAL |
|
JSSG 2001 : B
|
AIR VEHICLE |
|
MIL PRF 62430 : B
|
HARNESS ASSEMBLY, THERMOCOUPLE |
|
SAE AS 5127 : 2013
|
AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS METHODS FOR PREPARING AEROSPACE SEALANT TEST SPECIMENS |
|
MIL PRF 32538 : 0
|
LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE, NATO CODE NUMBER: O-165 |
|
BS EN 3155-067 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
ISO 8068:2006
|
Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
|
SAE AIR 744 : 2015
|
AEROSPACE AUXILIARY POWER SOURCES |
|
MIL DTL 22992 : H
|
CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE, GENERAL SPECIFICATION FOR |
|
PREN 3155-024 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
MIL DTL 17 : J
|
CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
|
SAE AS 5258 : 2012
|
INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR |
|
MIL PRF 85704 : C
|
CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
|
PREN 3733-001 : 200P1
|
AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
|
PREN 6059-303 : 200P3
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
|
PREN 4814 : DRAFT 2015
|
AEROSPACE SERIES - FLANGE COUPLINGS UP TO 21000 KPA - TECHNICAL SPECIFICATION - INCH SERIES |
|
PREN 4816 : DRAFT 2015
|
AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL - TECHNICAL SPECIFICATION - INCH SERIES |
|
MIL DTL 83526 : D
|
CONNECTORS, FIBER OPTIC, CIRCULAR, ENVIRONMENTAL RESISTANT, HERMAPHRODITIC, GENERAL SPECIFICATION FOR |
|
MIL PRF 81352 : C
|
COATINGS, AIRCRAFT TOUCH-UP |
|
MIL PRF 32177 : A
|
CLEANING COMPOUND, NONSKID |
|
MIL DTL 25038 : J
|
WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, AND FLIGHT CRITICAL |
|
MIL PRF 30099 : A
|
TREATMENT SYSTEM, BLACKWATER AND COMBINED BLACKWATER/GRAYWATER, FOR SURFACE SHIPS |
|
SAE AS 81824 : 2016
|
SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT |
|
SAE AS 22227 : 2014(S2018)
|
BEARING, BALL, ANNULAR, GENERATOR AND MOTOR GENERATOR |
|
SAE AMS 7272 : 2013
|
RUBBER: BUTADIENE-ACRYLONITRILE (NBR) SYNTHETIC LUBRICANT RESISTANT 65 - 75 HARDNESS FOR SEALS IN SYNTHETIC LUBRICANT SYSTEMS |
|
SAE AMS 3384 : 2013
|
RUBBER, FLUOROCARBON ELASTOMER (FKM), 70 TO 80 HARDNESS, LOW TEMPERATURE SEALING TG -22 DEGREES F (-30 DEGREES C), FOR ELASTOMERIC SHAPES OR PARTS IN GAS TURBINE ENGINE OIL, FUEL AND HYDRAULIC SYSTEMS |
|
PREN 3155-068 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
PREN 4689 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
PREN 3155-067 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
PREN 3545-001 : 200P4
|
AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
|
SAE AS 85485 : 2017
|
CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
|
SAE AS 5272 : 2016
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION |
|
SAE AS 83519 : 2015
|
SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR |
|
PREN 3155-069 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
|
SAE AMS 3144 : 2012
|
PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
|
PREN 4688 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
SAE AS 81582 : 2017
|
CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
|
PREN 4687 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
SAE AMS 3021 : 2017
|
FLUID, REFERENCE FOR TESTING DI-ESTER (POLYOL) RESISTANT MATERIAL |
|
SAE AS 5363 : 2016
|
ELECTROMECHANICAL POWER CONTROLLER/RELAY, GENERAL SPECIFICATION FOR |
|
SAE AS 81703 : 2012
|
CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
|
SAE AS 81659 : 2017
|
CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR |
|
SAE AS 5958 : 2017
|
FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
|
I.S. EN 3155-069:2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
|
I.S. EN 4687:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
I.S. EN 3733-001:2009
|
AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
|
SAE AS 83248/2 : 2016
|
O-RING MOLDED FROM AMS7259 MATERIAL |
|
SAE AS 6224 : 2015
|
WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT |
|
I.S. EN 3155-068:2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
SAE AMS C 27725 : 2016
|
COATING, CORROSION PREVENTATIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS, FOR USE TO 250 DEGREES F (121 DEGREES C) |
|
I.S. EN 4814:2017
|
AEROSPACE SERIES - FLANGE COUPLINGS UP TO 21000 KPA - TECHNICAL SPECIFICATION - INCH SERIES |
|
SAE AMS 3379 : 2013(R2018)
|
SEALING COMPOUND, POLYSULFIDE RUBBER PREFORMED STRIPS FOR SEALING REMOVABLE DOORS, SKINS, AND PANELS |
|
SAE AS 83485 : 2016
|
O-RING MOLDED FROM AMS7287 MATERIAL |
|
SAE AMS 7287 : 2012
|
FLUOROCARBON ELASTOMER (FKM) HIGH TEMPERATURE/HTS OIL RESISTANT/FUEL RESISTANT LOW COMPRESSION SET/70 TO 80 HARDNESS, LOW TEMPERATURE TG -22 DEGREES F (-30 DEGREES C) FOR SEALS IN OIL/FUEL/SPECIFIC HYDRAULIC SYSTEMS |
|
SAE AS 81714 : 2014
|
TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR |
|
SAE AMS 3603 : 2002
|
PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS |
|
BS EN 6059-303 : 2017
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
|
ASTM D 4304 : 2017 : REDLINE
|
Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines |
|
SAE AS 5780 : 2018
|
SPECIFICATION FOR AERO AND AERO-DERIVED GAS TURBINE ENGINE LUBRICANTS |
|
I.S. EN 3155-067:2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
15/30332965 DC : 0
|
BS EN 6059-303 - AEROSPACE SERIES - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
|
SAE AIR 786 : 2014
|
ELASTOMER COMPATIBILITY CONSIDERATIONS RELATIVE TO ELASTOMERIC SEALANT SELECTION |
|
SAE AS 1701 : 2017
|
LUBRICANT, SOLID FILM |
|
BS EN 3155-039 : 2007
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 039: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
BS EN 3716-001 : 2006
|
AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION |
|
13/30292601 DC : 0
|
BS EN 3646-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
|
BS EN 3155-041 : 2007
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 041: CONTACTS, ELECTRICAL, COAXIAL, SIZE 12, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
BS EN 3155-025 : 2006
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
BS EN 3545-001 : 2008
|
AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREE C TO 175 DEGREE C - PART 001: TECHNICAL SPECIFICATION |
|
BS EN 3218-001 : 2006
|
AEROSPACE SERIES - CONNECTORS, RECTANGULAR, WITH METALLIC SHELLS AND SCREW-LOCKING - PART 001: TECHNICAL SPECIFICATION |
|
BS EN 3708-001 : 2006
|
AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 001: TECHNICAL SPECIFICATION |
|
BS EN 3155-040 : 2007
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 040: CONTACTS, ELECTRICAL, COAXIAL, SIZE 12, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
BS EN 3155-024 : 2006
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
MIL PRF 21480 : B
|
GENERATOR SYSTEM, ELECTRIC POWER, 400 HERTZ, ALTERNATING CURRENT, AIRCRAFT - GENERAL SPECIFICATION FOR |
|
I.S. EN 3545-001:2008
|
AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
|
EN 4689 : 2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
EN 4687 : 2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
EN 4688 : 2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
EN 3708-001 : 2006
|
AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 001: TECHNICAL SPECIFICATION |
|
EN 3155-040 : 2007
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 040: CONTACTS, ELECTRICAL, COAXIAL, SIZE 12, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
EN 3155-068 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
EN 3155-025 : 2006
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
EN 3155-067 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
EN 3733-001 : 2009
|
AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
|
EN 3218-001 : 2006
|
AEROSPACE SERIES - CONNECTORS, RECTANGULAR, WITH METALLIC SHELLS AND SCREW-LOCKING - PART 001: TECHNICAL SPECIFICATION |
|
EN 4814 : 2017
|
AEROSPACE SERIES - FLANGE COUPLINGS UP TO 21000 KPA - TECHNICAL SPECIFICATION - INCH SERIES |
|
EN 3155-041 : 2007
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 041: CONTACTS, ELECTRICAL, COAXIAL, SIZE 12, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
EN 3716-001 : 2006
|
AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION |
|
EN 3545-001:2008
|
AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
|
EN 4816 : 2017
|
AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL - TECHNICAL SPECIFICATION - INCH SERIES |
|
EN 3155-069 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
|
EN 3155-039 : 2007
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 039: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
EN 3155-024 : 2006
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |