MIL-PRF-64266 Revision B:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CONNECTORS, FIBER OPTIC, CIRCULAR AND RECTANGULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, ENVIRONMENT RESISTING GENERAL SPECIFICATION FOR
Available format(s)
PDF
Superseded date
01-13-2020
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - CONNECTOR INTERFACE DIMENSIONS
APPENDIX B - CONNECTOR INSERT ARRANGEMENTS
AND INTERFACE DIMENSIONS
APPENDIX C - CONNECTOR ACCESSORIES CONFIGURATIONS
Specifies the performance requirements for circular and rectangular, plug and receptacle style, multiple removable genderless termini, fiber optic connectors that are for Department of Defense applications and that are compatible with multiple transmission element cables.
| Committee |
FSC 6060
|
| DocumentType |
Standard
|
| Pages |
78
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| MIL-PRF-64266-19 Base Document:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, SCREW THREADS, BACKSHELL, SPLIT SINGLE FIBER CABLES, CONVULUTED TUBING THREADED CABLE INTERFACE, ENVIRONMENT RESISTING |
| MIL-PRF-64266-16 Revision A:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, BACKSHELL, SOLID, SINGLE FIBER CABLES, BANDED ADAPTER/CABLE STRAIN RELIEF INTERFACE, NONENVIRONMENT RESISTING |
| MIL-PRF-64266-32 Base Document:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, TEST TERMINUS ADAPTER, PLUG STYLE, FOR USE WITH A CONNECTOR RECEPTACLE |
| MIL-STD-1678-2 Revision A:2013 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 2: OPTICAL MEASUREMENTS (PART 2 OF 6 PARTS) |
| MIL-STD-1678-6 Revision A:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 6: PARTS AND SUPPORT EQUIPMENT COMMONALITY AND STANDARDIZATION REQUIREMENTS (PART 6 OF 6 PARTS) |
| MIL-PRF-29504-20 Base Document:2008 | Termini, Fiber Optic, Keyed, Connector, Removable, Environment Resisting, Pin Terminus, Rear Insert/Rear Release, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors) |
| MIL-STD-2042-6 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (TESTS) (PART 6 OF 7 PARTS) |
| MIL-PRF-64266-3 Revision B:2014 | CONNECTOR, RECEPTACLE, FIBER OPTIC, CIRCULAR MULTIPLE REMOVABLE TERMINI, SCREW THREADS, JAMNUT MOUNTING, ENVIRONMENT RESISTING |
| MIL-PRF-64266-17 Revision A:2014 | CONNECTOR, RECEPTACLE, FIBER OPTIC, CIRCULAR, MULTIPLE REMOVABLE TERMINI, DUMMY STOWAGE, SCREW THREADS, ENVIRONMENT RESISTING |
| MIL-PRF-64266-10 Revision B:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG STYLE, MULTIPLE REMOVABLE TERMINI, DUST COVER, SCREW THREADS, ENVIRONMENT RESISTING |
| MIL-PRF-64266-12 Revision A:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, BACKSHELL, SOLID, SINGLE FIBER CABLES, CONVOLUTED TUBING THREADED CABLE INTERFACE, ENVIRONMENT RESISTING |
| MIL-STD-1678-1 Revision D:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS) |
| MIL-STD-2042-2 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (EQUIPMENT) (PART 2 OF 7 PARTS) |
| MIL-PRF-64266-23 Base Document:2014 | CONNECTORS, FIBER OPTIC, RECTANGULAR, PLUG, BACKPLANE STYLE, MULTIPLE REMOVABLE TERMINI, SINGLE FIBER CABLES, BLIND MATED, NONENVIRONMENT RESISTING, TEMPERATURE RANGES 1 & 2 |
| MIL-PRF-64266-5 Base Document:2008 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, 45 DEGREES BACKSHELL, HEAVY DUTY, ENVIRONMENT RESISTING |
| MIL-PRF-64266-11 Revision B:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, DUST COVER, SCREW THREADS, ENVIRONMENT RESISTING |
| SAE AS 6021 : 2014 | AS6021 AEROSPACE FIBER OPTIC CABLE ASSEMBLY DRAWING SPECIFICATION |
| MIL-STD-1678-4 Revision C:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 4: TEST SAMPLE CONFIGURATION AND FABRICATION REQUIREMENTS (PART 4 OF 6 PARTS) |
| MIL-PRF-64266-30 Base Document:2014 | CONNECTORS, FIBER OPTIC, RECTANGULAR, MULTIPLE REMOVABLE TERMINI, SINGLE FIBER CABLES, PLUG BACKSHELL, CARD FRONT EDGE STYLE, NO STRENGTH MEMBER CAPTURE AT CABLE ENTRY INTERFACE, NONENVIRONMENT RESISTING, TEMPERATURE RANGES 1 & 2 |
| SAE AS 5659/4 : 2017 | PHYSICAL LAYER SPECIFICATION |
| MIL-PRF-85045-31 Revision A:2015 | CABLE, FIBER OPTIC, SINGLE (ONE) FIBER, CABLE CONFIGURATION TYPE 2 (OFCC), CLASS SM AND MM, TEMPERATURE RANGE AND OTHER PERFORMANCE CHARACTERISTICS (METRIC) |
| MIL-PRF-64266-1 Revision B:2014 | CONNECTOR, RECEPTACLE, FIBER OPTIC, CIRCULAR, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, WALL MOUNTING, ENVIRONMENT RESISTING |
| MIL-PRF-64266-2 Revision B:2014 | CONNECTOR, PLUG STYLE, FIBER OPTIC, CIRCULAR, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, ENVIRONMENT RESISTING |
| MIL-PRF-64266-33 Base Document:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, TEST TERMINUS ADAPTER, RECEPTACLE STYLE, FOR USE WITH A CONNECTOR PLUG |
| MIL-PRF-64266-4 Base Document:2008 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, STRAIGHT BACKSHELL, HEAVY DUTY, ENVIRONMENT RESISTING |
| MIL-PRF-64266-29 Base Document:2014 | CONNECTORS, FIBER OPTIC, RECTANGULAR, MULTIPLE REMOVABLE TERMINI, SINGLE FIBER CABLES, PLUG BACKSHELL, BACKPLANE STYLE, NO STRENGTH MEMBER CAPTURE AT CABLE ENTRY INTERFACE, NONENVIRONMENT RESISTING, TEMPERATURE RANGES 1 & 2 |
| MIL-PRF-64266-14 Revision A:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, BACKSHELL, SOLID, SINGLE FIBER CABLES, NO CABLE ENTRY END INTERFACE, ENVIRONMENT RESISTING |
| MIL-PRF-64266-15 Revision A:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, BACKSHELL, SOLID, SINGLE FIBER CABLES, CONVOLUTED TUBING THREADED CABLE INTERFACE, NONENVIRONMENT RESISTING |
| MIL-PRF-64266-8 Revision B:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, EMI RETENTION NUT |
| MIL-PRF-64266-20 Base Document:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, SCREW THREADS, BACKSHELL, SPLIT, SINGLE FIBER CABLES, BANDING ADAPTER/CABLE STRAIN RELIEF INTERFACE, ENVIRONMENT RESISTING |
| MIL-PRF-29504-21 Base Document:2014 | Test Terminus, Fiber Optic, Keyed, Removable, use in Optical Loss and Optical Continuity Testing, Rear Insert/Rear Release Through a Test Terminus Adapter, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors) |
| MIL-PRF-64266-28 Base Document:2014 | CONNECTORS, FIBER OPTIC, RECTANGULAR, MULTIPLE REMOVABLE TERMINI, SINGLE FIBER CABLES, RECEPTACLE BACKSHELL, CARD FRONT EDGE STYLE, NO STRENGTH MEMBER CAPTURE AT CABLE ENTRY INTERFACE, NONENVIRONMENT RESISTING, TEMPERATURE RANGES 1 & 2 |
| SAE AS 5675 : 2012 | CHARACTERIZATION AND REQUIREMENTS FOR NEW AEROSPACE FIBER OPTIC CABLE ASSEMBLIES - JUMPERS, END FACE GEOMETRY, LINK LOSS MEASUREMENT, AND INSPECTION |
| MIL-STD-2042-1 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLES) (PART 1 OF 7 PARTS) |
| MIL-PRF-29504-19 Base Document:2008 | TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, DUMMY TERMINUS, (FOR MIL-PRF-64266 CONNECTORS) |
| MIL-STD-2042-5 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CONNECTORS AND INTERCONNECTIONS) (PART 5 OF 7 PARTS) |
| SAE ARP 6283 : 2018 | IN-SERVICE FIBER OPTIC INSPECTION, EVALUATION AND CLEANING, BEST PRACTICES, PHYSICAL CONTACT TERMINI |
| MIL-PRF-64266-25 Base Document:2014 | CONNECTORS, FIBER OPTIC, RECTANGULAR, PLUG, CARD FRONT EDGE STYLE, MULTIPLE REMOVABLE TERMINI, SINGLE FIBER CABLES, JACKSCREW LOCKING, NO STRENGTH MEMBER CAPTURE AT CABLE ENTRY INTERFACE, NONENVIRONMENT RESISTING, TEMPERATURE RANGES 1 & 2 |
| MIL-PRF-64266-6 Base Document:2008 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, 90 DEGREES BACKSHELL, HEAVY DUTY, ENVIRONMENT RESISTING |
| MIL-PRF-29504-18 Base Document:2008 | Termini, Fiber Optic, Non-Keyed, Connector, Removable, Environment Resisting, Pin Terminus, Rear Insert/Rear Release, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors) |
| MIL-PRF-64266-18 Revision A:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, BACKSHELL, SPLIT, MULTIPLE FIBER CABLES, STRENGTH MEMBER CAPTURE AND BEND LIMITING INTERFACE, ENVIRONMENT RESISTING |
| MIL-PRF-64266-13 Revision A:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, BACKSHELL, SOLID, SINGLE FIBER CABLES, BANDED ADAPTER/CABLE STRAIN RELIEF INTERFACE, ENVIRONMENT RESISTING |
| MIL-PRF-64266-21 Base Document:2013 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, SCREW THREADS, BACKSHELL, SPLIT, SINGLE FIBER CABLES, NO CABLE ENTRY END INTERFACE, ENVIRONMENT RESISTING |
| MIL-PRF-64266-9 Revision A:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, ALIGNMENT SLEEVE RETAINER (ASR), MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, ENVIRONMENT RESISTING |
| MIL-PRF-64266-7 Base Document:2008 | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, LIGHT DUTY BACKSHELL, ENVIRONMENT RESISTING |
| MIL-PRF-64266-26 Base Document:2014 | CONNECTORS, FIBER OPTIC, RECTANGULAR, ALIGNMENT SLEEVE RETAINER (ASR), BOTH BACKPLANE AND CARD FRONT EDGE STYLE, MULTIPLE REMOVABLE TERMINI, SINGLE FIBER CABLES, NONENVIRONMENT RESISTING, TEMPERATURE RANGES 1 & 2 |
| TIA 455-26 : A1985(R2012) | FOTP-26 - CRUSH RESISTANCE OF FIBER OPTIC INTERCONNECTING DEVICES |
| TIA 455-14 : A1992(R2012) | FIBER OPTIC SHOCK TEST (SPECIFIED PULSE) |
| TIA/EIA 455-35 : A1990(R2008) | FIBER OPTIC COMPONENT DUST (FINE SAND) TEST |
| TIA/EIA 455-16 : A1991(R2014) | SALT SPRAY (CORROSION) TEST FOR FIBER OPTIC COMPONENTS - FOTP-16 |
| TIA/EIA 455-2 : C1998(R2008) | IMPACT TEST MEASUREMENTS FOR FIBER OPTIC DEVICES |
| MIL-PRF-29504-18 Base Document:2008 | Termini, Fiber Optic, Non-Keyed, Connector, Removable, Environment Resisting, Pin Terminus, Rear Insert/Rear Release, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors) |
| MIL-PRF-29504 Revision B:2002 | TERMINI, FIBER OPTIC CONNECTOR, REMOVABLE, GENERAL SPECIFICATION FOR |
| TIA/EIA 455-1 : B1998(R2008) | CABLE FLEXING FOR FIBER OPTIC INTERCONNECTING DEVICES |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| MIL-PRF-29504-20 Base Document:2008 | Termini, Fiber Optic, Keyed, Connector, Removable, Environment Resisting, Pin Terminus, Rear Insert/Rear Release, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors) |
| TIA 455-36 : A1986(R2012) | FOTP-36 - TWIST TEST FOR FIBER OPTIC CONNECTING DEVICES |
| TIA 455-21 : A1988(R2012) | FOTP-21 MATING DURABILITY FOR FIBER OPTIC INTERCONNECTING DEVICES |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| TIA 455-13 : A1996(R2012) | VISUAL AND MECHANICAL INSPECTION OF FIBER OPTIC COMPONENTS, DEVICES, AND ASSEMBLIES |
| TIA/EIA 455 : C2014 | STANDARD TEST PROCEDURE FOR FIBER OPTIC FIBERS, CABLES, TRANSDUCERS, SENSORS, CONNECTING AND TERMINATING DEVICES, AND OTHER FIBER OPTIC COMPONENTS |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| MIL-STD-1678-5 Revision B:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 5: DESIGN PHASE, SUPPLEMENTAL AND LEGACY MEASUREMENTS (PART 5 OF 6 PARTS) |
| TIA 455-189 : 1992(R2012) | OZONE EXPOSURE TEST FOR FIBER OPTIC COMPONENTS |
| TIA/EIA 455-3 : B2009(R2014) | PROCEDURE TO MEASURE TEMPERATURE CYCLING EFFECTS ON OPTICAL FIBER UNITS, OPTICAL CABLE, AND OTHER PASSIVE FIBER COMPONENTS |
| MIL-PRF-49291 Revision D:2013 | FIBER, OPTICAL, (METRIC) GENERAL SPECIFICATION FOR |
| TIA 455-107 : A1999 | DETERMINATION OF COMPONENT REFLECTANCE OR LINK/SYSTEM RETURN LOSS USING A LOSS TEST SET |
| TIA 455-20 : B2004(R2013) | OPTICAL FIBRES - PART 1-46: MEASUREMENT METHODS AND TEST PROCEDURES - MONITORING OF CHANGES IN OPTICAL TRANSMITTANCE |
| MIL-STD-790 Revision G:2011 | ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| MIL-STD-1678-4 Revision C:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 4: TEST SAMPLE CONFIGURATION AND FABRICATION REQUIREMENTS (PART 4 OF 6 PARTS) |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| TIA/EIA 455-34 : A1995(R2002) | INTERCONNECTION DEVICE INSERTION LOSS TEST |
| MIL-STD-1678-2 Revision A:2013 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 2: OPTICAL MEASUREMENTS (PART 2 OF 6 PARTS) |
| TIA/EIA 455-32 : A1990(R2008) | FOTP-32 - FIBER OPTIC CIRCUIT DISCONTINUITIES |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-STD-1678-3 Revision C:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 3: PHYSICAL, MECHANICAL, ENVIRONMENTAL AND MATERIAL MEASUREMENTS (PART 3 OF 6 PARTS) |
| TIA 455-6 : B1992(R2012) | CABLE RETENTION TEST PROCEDURE FOR FIBER OPTIC CABLE INTERCONNECTING DEVICES |
| MIL-PRF-29504-19 Base Document:2008 | TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, DUMMY TERMINUS, (FOR MIL-PRF-64266 CONNECTORS) |
| TIA 455-56 : C2009(R2017) | TEST METHOD FOR EVALUATING FUNGUS RESISTANCE OF OPTICAL FIBER AND CABLE |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.