MIL-STD-1623 Revision E:2006
Current
Current
The latest, up-to-date edition.
FIRE PERFORMANCE REQUIREMENTS AND APPROVED SPECIFICATIONS FOR INTERIOR FINISH MATERIALS AND FURNISHINGS (NAVAL SHIPBOARD USE)
Available format(s)
PDF
Publisher
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
TABLES
Describes fire performance requirements and approved specifications for various categories of interior finish materials and furnishings for use on Naval surface ships and submarines.
| Committee |
FSC 19GP
|
| DevelopmentNote |
E NOTICE 1 - Notice of Validation. (02/2015)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| MIL-PRF-3135 Revision H:2008 | DECK COVERING UNDERLAY MATERIALS |
| MIL I 2818 : C | INSULATION BLANKET, THERMAL, FIBROUS MINERAL |
| MIL R 20092 : L | RUBBER OR PLASTIC SHEETS AND ASSEMBLED AND MOLDED SHAPES, SYNTHETIC, FOAM OR SPONGE, OPEN CELL |
| MIL-PRF-32433 Base Document:2012 | BLANKET, WASHABLE, FLAME RESISTANT, SHIPBOARD |
| MIL I 2781 : F | INSULATION, PIPE THERMAL |
| MIL-PRF-32584 Base Document:2017 | Deck Covering Materials, Monolithic |
| MIL-PRF-24667 Revision C:2008 | COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
| MIL-P-15280 Revision J:1988 | PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES) |
| MIL-I-16411 Revision F:1988 | INSULATION FELT, THERMAL, GLASS FIBER |
| MIL-C-24500 Revision A:1990 | CLOTH, DRAPERY, BUNK CURTAIN, SLIPCOVERS AND LABELS, FIRE RETARDANT |
| MIL-I-22023 Revision D:1982 | INSULATION FELT, THERMAL AND SOUND ABSORBING FELT, FIBROUS GLASS, FLEXIBLE |
| MIL D 24613 : 0 | DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
| MIL-DTL-32525 Base Document:2016 | MAGAZINE, PORTABLE (SHIPBOARD) |
| MIL-I-23128 Revision B:1982 | INSULATION BLANKET, THERMAL, REFRACTORY FIBER, FLEXIBLE |
| MIL-L-24518 Base Document:1975 | LAMINATE, VINYL FILM ALUMINUM, DECORATIVE |
| MIL-PRF-32170 Revision A:2006 | DECK TILES, WEAR-RESISTANT |
| MIL-D-3134 Revision J:1988 | DECK COVERING MATERIALS |
| MIL-PRF-22344 Revision E:2004 | INSULATION, PIPE, THERMAL |
| ASTM C 1086 : 2009 | Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation |
| MIL-DTL-15562 Revision G:1996 | MATTING OR SHEET, FLOOR COVERING, INSULATING FOR HIGH VOLTAGE APPLICATION |
| A-A-59473 Base Document:1999 | Curtain, Track, and Suspension System, Berth (Naval Shipboard) |
| MIL-PRF-24613 Revision A:2007 | DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
| MIL-P-17171 Revision E:1990 | PLASTIC, LAMINATE, DECORATIVE, HIGH PRESSURE |
| ASTM C 1086 : 2009 : R2016 | Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation |
| MIL-PRF-2818 Revision E:2016 | Insulation Blanket, Thermal |
| MIL-PRF-20092 Revision N:2017 | RUBBER OR PLASTIC SHEETS AND ASSEMBLED AND MOLDED SHAPES, SYNTHETIC, FOAM OR SPONGE, OPEN CELL |
| MIL-PRF-32038 Revision A:2009 | SHIPBOARD FURNITURE, FIXTURES, FITTINGS, AND ACCESSORIES |
| MIL-I-742 Revision F:1980 | INSULATION BOARD, THERMAL, FIBROUS GLASS |
| MIL D 17951 : E | DESK COVERING, LIGHTWEIGHT, NONSLIP, SILICON CARBIDE PARTICLE COATED FABRIC FILM, OR COMPOSITE AND SEALING COMPOUND |
| MIL I 22344 : D | INSULATION, PIPE, THERMAL, FIBROUS GLASS |
| MIL-PRF-2819 Revision H:2013 | INSULATION BLOCK, THERMAL |
| MIL I 2819 : E | INSULATION BLOCK THERMAL |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| MIL-P-17171 Revision E:1990 | PLASTIC, LAMINATE, DECORATIVE, HIGH PRESSURE |
| DOD I 24688 : 0 | INSULATION PANEL, THERMAL AND ACOUSTIC ABSORPTIVE, OPEN-CELL POLYIMIDE FOAM |
| MIL-PRF-22344 Revision E:2004 | INSULATION, PIPE, THERMAL |
| L-P-1040 Revision B:1977 | PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE) |
| MIL-C-22395 Revision B:1980 | COMPOUND, END SEALING, THERMAL INSULATION PIPE COVERING FIRE, WATER AND WEATHER RESISTANT |
| MIL-D-3134 Revision J:1988 | DECK COVERING MATERIALS |
| MIL-PRF-32170 Revision A:2006 | DECK TILES, WEAR-RESISTANT |
| FED-STD-501 Revision A:1966 | FLOOR COVERING, RESILIENT, NONTEXTILE, SAMPLING AND TESTING |
| MIL-C-24500 Revision A:1990 | CLOTH, DRAPERY, BUNK CURTAIN, SLIPCOVERS AND LABELS, FIRE RETARDANT |
| MIL-STD-3020 Base Document:2007 | FIRE RESISTANCE OF U.S. NAVAL SURFACE SHIPS |
| MIL-PRF-2819 Revision H:2013 | INSULATION BLOCK, THERMAL |
| MIL I 2781 : F | INSULATION, PIPE THERMAL |
| NFPA 267 : 1998 | METHOD OF TEST FOR FIRE CHARACTERISTICS OF MATTRESSES AND BEDDING ASSEMBLIES EXPOSED TO FLAMING IGNITION SOURCE |
| MIL-PRF-24712 Revision B:2014 | COATINGS, POWDER, THERMOSETTING |
| MIL-DTL-24191 Revision D:1996 | PLASTIC SHEET, CELL OR CONTINUOUS CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATION AND SIGNAL LIGHTING) |
| MIL-DTL-15562 Revision G:1996 | MATTING OR SHEET, FLOOR COVERING, INSULATING FOR HIGH VOLTAGE APPLICATION |
| MIL-T-24708 Base Document:1988 | THERMAL/ACOUSTIC INSULATION BARRIER MATERIAL: POLYIMIDE FOAM |
| MIL-PRF-23653 Revision D:2009 | PLASTIC TILES, VIBRATION DAMPING |
| MIL-I-22023 Revision D:1982 | INSULATION FELT, THERMAL AND SOUND ABSORBING FELT, FIBROUS GLASS, FLEXIBLE |
| MIL-PRF-24172 Revision B:2004 | INSULATION, PLASTIC, CELLULAR FOAM, RIGID, PREFORMED AND FOAM-IN-PLACE |
| CCC-C-436 Revision E:1986 | CLOTH, TICKING TWILL, COTTON |
| MIL-PRF-32161 Base Document:2004 | INSULATION, HIGH TEMPERATURE FIRE PROTECTION, THERMAL AND ACOUSTIC |
| MIL-PRF-32171 Revision B:2009 | DECK COATINGS, HIGH DURABILITY |
| MIL-I-742 Revision F:1980 | INSULATION BOARD, THERMAL, FIBROUS GLASS |
| A-A-59517 Base Document:1999 | CLOTH, COATED OR LAMINATED, POLYVINYLCHLORIDE (ARTIFICIAL LEATHER) |
| FED-STD-191 Revision A:1978 | TEXTILE TEST METHODS |
| MIL-L-24518 Base Document:1975 | LAMINATE, VINYL FILM ALUMINUM, DECORATIVE |
| ASTM E 662 : 2017-02 | TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS |
| MIL-I-16411 Revision F:1988 | INSULATION FELT, THERMAL, GLASS FIBER |
| MIL-PRF-24667 Revision C:2008 | COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
| MIL-C-20079 Revision H:1987 | CLOTH, GLASS; TAPE, TEXTILE GLASS; AND THREAD, GLASS AND WIRE-REINFORCED GLASS |
| MIL-A-23054 Revision A:1982 | ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED |
| MIL-PRF-24613 Revision A:2007 | DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
| MIL-P-22581 Revision C:1991 | PLASTIC SHEET, VIBRATION DAMPING (TYPE ML-D2) |
| A-A-55188 Revision A:1995 | BLANKETS, BED, WOOL, SHRINK RESISTANT AND MOTHPROOFED |
| MIL-D-18873 Revision B:1959 | DECK COVERING MAGNESIA AGGREGATE MIXTURE |
| A-A-52085 Base Document:1991 | CLOTH, DRILL, COTTON |
| ASTM E 1264 : 2014 : REDLINE | Standard Classification for Acoustical Ceiling Products |
| MIL-A-21016 Revision F:1990 | ADHESIVE, RESILIENT DECK COVERING |
| ASTM E 162 : 2016 : REDLINE | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
| A-A-59502 Base Document:2000 | PLASTIC SHEET, POLYCARBONATE |
| MIL-PRF-3135 Revision H:2008 | DECK COVERING UNDERLAY MATERIALS |
| CFR 46(PTS156-165) : OCT 2017 | SHIPPING |
| MIL-D-21631 Revision A:1974 | DECK COVERING, LATEX CONCRETE |
| MIL-PRF-20092 Revision N:2017 | RUBBER OR PLASTIC SHEETS AND ASSEMBLED AND MOLDED SHAPES, SYNTHETIC, FOAM OR SPONGE, OPEN CELL |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.