MIL-STD-1760 Revision E:2007
Current
Current
The latest, up-to-date edition.
AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM
Available format(s)
PDF
Language(s)
English
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - Additional Interface Requirements
for GPS RF Signals
APPENDIX B - Data Bus Communication Rules and
Message Requirements
APPENDIX C - MIL-STD-1553 Data Bus Communication
Rules and Message Requirements
APPENDIX D - Fibre Channel Data Bus Communication
Rules and Message Requirements
APPENDIX E - Annotations Explaining Differences from
Revision D
Describes implementation requirements for the Aircraft/Store Electrical (and fiber optic) Interconnection System (AEIS) in aircraft and stores and provides a common interfacing capability for the operation and employment of stores on aircraft.
| Committee |
AREA SESS
|
| DocumentType |
Standard
|
| Pages |
219
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| DEFSTAN 00-970(PT1)SEC6/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT1)SEC6/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT |
| SAE AIR 6114 : 2016 | INTERFACE FOR MICRO MUNITION (IMM) HANDBOOK |
| MIL-STD-2156 Base Document:1983 | LAUNCHER, RAIL, GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR |
| DEFSTAN 00-970(PT1)SEC6/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| MIL-STD-8591 Base Document:2005 | AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE) |
| DEFSTAN 00-970(PT1)SEC6/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT1)SEC6/14(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT7)SEC7/1(2006) : 2006 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| DEFSTAN 00-970(PT1)SEC6/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 07-085(PT1)/4(2017) : 2017 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-STD-1353 Revision C:2014 | ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-2726 Revision C:2006 | RECEPTACLE, RECEPTACLE PLUGS, SWITCH AND RECEPTACLES, AND OUTLETS (ELECTRICAL), GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT1)SEC6/4(2006) : 2006 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT A/C - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT1)SEC6/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-69(PT2)/1(1998) : 1998 | AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM - PART 2: DESIGN PRINCIPLES AND PRACTICES FOR, AND GUIDE TO, THE IMPLEMENTATION OF THE AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM |
| MIL-HDBK-244 Revision A:1990 | GUIDE TO AIRCRAFT - STORES COMPATIBILITY |
| MIL-DTL-83538-1 Revision D:2008 | CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, RECEPTACLE, STORE ASSEMBLY, REMOVABLE CRIMP CONTACTS, SOCKETS, FOR MIL-STD-1760 APPLICATIONS (METRIC) |
| DEFSTAN 00-970(PT7)SEC2/SUPP6/5(2015) : INTERIM | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 6: EQUIPMENT (SUBPART F) |
| MIL STD 1763 : A | AIRCRAFT STORES CERTIFICATION PROCEDURES |
| MIL-DTL-83538-9 Revision B:2008 | CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ADAPTER, ACCESSORY, LAUNCHER RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC) |
| DEFSTAN 00-970(PT9)/5(2009) : 2009 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 9: UAV SYSTEMS |
| DEFSTAN 07-85(PT1)/3(2006) : 2006 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| DEFSTAN 66-031(PT8)/2(2016) : 2016 | REQUIREMENTS FOR ELECTRONIC AND ELECTRICAL TEST AND MEASUREMENT EQUIPMENT - PART 8: REQUIREMENTS FOR AUTOMATIC TEST SYSTEMS UTILISING AN OPEN SYSTEM ARCHITECTURE |
| MIL-A-8591 Revision H:1990 | AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE); GENERAL DESIGN CRITERIA FOR |
| SAE AS 4764 : 2017 | VALIDATION METHODS FOR MIL-STD-1760 AIRCRAFT STATION INTERFACES |
| MIL-STD-2131 Revision A:1991 | LAUNCHER, EJECTION GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR |
| DEFSTAN 00-970(PT7)SEC7/2(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| DEFSTAN 00-970(PT1)SEC6/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT |
| SAE AS 5609 : 2017 | AIRCRAFT/STORE COMMON INTERFACE CONTROL DOCUMENT FORMAT STANDARD |
| STANAG 3576 : 2016 | ELECTRICAL CONNECTOR FOR DISPENSERS AND INTERNAL INTERVALOMETER TYPE ROCKET LAUNCHERS FOR AIRCRAFT |
| SAE AS 5653 : 2014 | HIGH SPEED NETWORK FOR MIL-STD-1760 |
| DEFSTAN 00-970(PT7)SEC7/3(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| SAE AIR 4013 : 2012 | MULTIPLEX DATA BUS NETWORKS FOR MIL-STD-1760 STORES |
| DEFSTAN 00-970(PT1)SEC6/6(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| MIL-HDBK-1760 Revision A:2004 | AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM |
| DEFSTAN 00-18(PT1)SEC2/2(1991) : 1991 | AVIONIC DATA TRANSMISSION INTERFACE SYSTEMS - PART 1: GUIDE TO INTERFACE SYSTEMS - SEC 2: GUIDE TO THE SERIAL, TIME DIVISION, COMMAND/RESPONSE MULTIPLEX DATA BUS STANDARD |
| MIL C 85629 : A (1) | CONTROL MONITOR SET GUIDED WEAPON, AN/AWW-13 |
| MIL-HDBK-1763 Base Document:1998 | AIRCRAFT/STORES COMPATIBILITY: SYSTEMS ENGINEERING DATA REQUIREMENTS AND TEST PROCEDURES |
| SAE AS 47641 : 2017 | VALIDATION METHODS FOR MIL-STD-1760B AIRCRAFT STATION INTERFACES |
| JSSG-2001 Revision B:2004 | Air Vehicle |
| SAE AS 5716 : 2012 | STANDARD ELECTRICAL AND LOGICAL INTERFACE FOR AIRBORNE FUZING SYSTEMS |
| SAE AS 5725 : 2015 | INTERFACE STANDARD, MINIATURE MISSION STORE INTERFACE |
| SAE AIR 6027 : 2017 | CONSIDERATIONS FOR SAFE STORE OPERATION ON MANNED AND UNMANNED VEHICLES |
| SAE AS 42701 : 2014 | VALIDATION METHODS FOR MIL-STD-1760D MISSION STORES |
| SAE AIR 6234 : 2016 | HANDBOOK: STANDARD ELECTRICAL AND LOGICAL INTERFACE FOR AIRBORNE FUZING SYSTEMS |
| SAE AS 5726 : 2013 | INTERFACE STANDARD, INTERFACE FOR MICRO MUNITIONS |
| MIL-HDBK-516 Revision C:2014 | AIRWORTHINESS CERTIFICATION CRITERIA |
| SAE AS 6089 : 2017 | VERIFICATION METHODS FOR AS5653 NETWORK CONTROLLER |
| DEFSTAN 00-970(PT1)SEC6/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT1)SEC6/5(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT AIRCRAFT - SECTION 6: EQUIPMENT |
| MIL-I-8671 Revision D:1994 | INSTALLATION OF DROPPABLE STORES AND ASSOCIATED RELEASE SYSTEMS |
| MIL-STD-1289 Revision D:2003 | AIRBORNE STORES GROUND FIT AND COMPATIBILITY, REQUIREMENTS |
| SAE AS 47643 : 2017 | VERIFICATION METHODS FOR MIL-STD-1760E AIRCRAFT STATION INTERFACES |
| DEFSTAN 00-970(PT1)SEC6/16(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| SAE AS 4270 : 2017 | VALIDATION METHODS FOR MIL-STD-1760 MISSION STORES |
| SAE AS 47642 : 2017 | VALIDATION METHODS FOR MIL-STD-1760C AIRCRAFT STATION INTERFACES |
| SAE AIR 5683 : 2016 | HIGH PERFORMANCE 1553 RESEARCH AND DEVELOPMENT |
| MIL-D-8708 Revision C:1991 | DEMONSTRATION REQUIREMENTS FOR AIRPLANES |
| MIL-DTL-83538-10 Revision B:2008 | CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, BUSHING, CABLE, LAUNCHER RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC) |
| MIL-DTL-83538-13 Revision A:2008 | CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, TEST PLUG, REMOVABLE CRIMP CONTACTS, PINS, FOR MIL-STD-1760 APPLICATIONS (METRIC) |
| SAE ARD 50020 : A2003 | FIBER-OPTIC INTERCONNECTION HARDWARE FOR AEROSPACE APPLICATIONS |
| AEP-100 : 2016 | ELECTRICAL CONNECTOR FOR DISPENSERS AND INTERNAL INTERVALOMETER TYPE ROCKET LAUNCHERS FOR AIRCRAFT |
| MIL-STD-704 Revision F:2004 | AIRCRAFT ELECTRIC POWER CHARACTERISTICS |
| STANAG 3837 : 0 | AIRCRAFT STORES ELECTRICAL INTERCONNECTION SYSTEM |
| SAE AS 39029/58 : 2015 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-24308, MIL-DTL-38999 SERIES 1, 2, 3, AND 4, AND MIL-DTL-55302/69 AND MIL-DTL-83733 CONNECTORS) |
| SAE AS 5653 : 2014 | HIGH SPEED NETWORK FOR MIL-STD-1760 |
| SAE AS 39029/114 : 2016 | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, SOCKET, SIZE 8, MIL-DTL-38999 SERIES 1, 3, AND 4 |
| MIL-DTL-83538 Revision D:2006 | CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS FOR MIL-STD-1760 APPLICATIONS (METRIC), GENERAL SPECIFICATION FOR |
| MIL-STD-8591 Base Document:2005 | AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE) |
| MIL-HDBK-1553 Revision A:1988 | Multiplex Application Handbook |
| STANAG 3838 : 2016 | DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS |
| SAE AS 85049 : 2016 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| SAE AS 39029/56 : 2011 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-38999 SERIES 1, 3 AND 4 CONNECTORS) |
| MIL C 17/113 : C | CABLE RADIO FREQUENCY FLEXIBLE COAXIAL 50 OHMS M 17/113 RG 316 |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| STANAG 4294(PT1) : 1997 | NAVSTAR GLOBAL POSITIONING SYSTEM GPS PART 1-SYSTEM CHARACTERISTICS |
| SAE AS 39029/75 : 2016 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES 1, 3, AND 4 CONNECTORS) |
| SAE AS 39029/113 : 2016 | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SIZE 8, (FOR MIL-DTL- 38999 SERIES 1, 3, AND 4 CONNECTORS) |
| MIL-STD-1560 Revision C:2015 | INSERT ARRANGEMENTS FOR MIL-DTL-38999, MIL-DTL-27599 AND SAE-AS29600 SERIES A - ELECTRICAL CIRCULAR CONNECTORS |
| SAE AS 39029/28 : 2016 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES 1, 2, 3 AND 4 CONNECTORS) |
| SAE AS 39029 : 2017 | CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR |
| SAE AS 39029/103 : 2016 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-DTL-38999 SERIES 1, 3 AND 4 CONNECTORS) |
| SAE AS 39029/102 : 2016 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-DTL-38999 SERIES 1, 2, 3 AND 4 CONNECTORS) |
| MS27488 Revision N:2008 | PLUG, END SEAL, ELECTRICAL CONNECTOR |
| STANAG 3350 : 0 | ANALOGUE VIDEO STANDARD FOR AIRCRAFT SYSTEM APPLICATIONS |
| MIL-STD-1553 Revision B:1978 | DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.