RIVETING, FABRICATING AND INSPECTION, STANDARD FOR

Published date

01-01-1962

Publisher

National Aeronautics and Space Administration

1. SCOPE
   1.0 Scope
   1.1 Application
2. APPLICABLE DOCUMENTS
   2.1 Government
   2.2 Other publications
3. DEFINITIONS
   3.1 Rivet
   3.2 Pilot hole
   3.3 Final hole
   3.4 Draw dimpling
   3.5 Erco dimpling
   3.6 Ram coin dimpling
4. GENERAL REQUIREMENTS
   4.1 Rivet symbols
   4.2 Cleaning
        4.2.1 Deburring
        4.2.2 Corrosion protection
   4.3 Rivet size
   4.4 Dimpling
        4.4.1 Coin dimpling
        4.4.2 Draw dimpling
   4.5 Hole positioning
   4.6 General repair
        4.6.1 Oversize holes
        4.6.2 Supervision of repair
        4.6.3 Standard repair records
        4.6.4 Defective rivets and rivet holes
   4.7 Deviations
5. DETAIL REQUIREMENTS
   5.1 Installation of MS20600, MS20601 and Huck (including
        Conical keystone Locking (CKL) fasteners
        5.1.1 Drilling of holes
        5.1.2 Driving the blind fasteners conforming to MS20600
               or MS20601 and CKL
        5.1.3 Inspection of blind fasteners conforming to Standard
               MS20600 or MS20601
        5.1.4 Removal of blind fasteners conforming to Standard
               MS20600 or MS20601
        5.1.5 Inspection of Huck CKL blind fasteners
   5.2 Installation of explosive blind fasteners (Standard
        MS20602 or MS20603)
        5.2.1 Precautions
        5.2.2 Drilling of holes
        5.2.3 Driving procedure
        5.2.4 Use of installation tools
        5.2.5 Inspection of explosive blind fasteners
   5.3 Installation of hi-shear rivets
        5.3.1 Drilling of holes
        5.3.2 Hi-shear collars
        5.3.3 Installation
        5.3.4 Removal methods for hi-shear rivets
        5.3.5 Inspection of hi-shear rivets
   5.4 Installation of solid rivets
        5.4.1 Drilling of holes
        5.4.2 Countersinking
        5.4.3 Rivet driving
        5.4.4 Inspection of standard solid rivets
   5.5 Tubular rivets (Standard MS20450 and similar)
        5.5.1 Hole size
        5.5.2 Installation
        5.5.3 General inspection
   5.6 Lockbolts - pull type and stump type
        5.6.1 Hole size
        5.6.2 Installation
        5.6.3 General inspection
   5.7 Pull fasteners
        5.7.1 Use of installation tools
        5.7.2 Trim of self-plugging pull rivets
        5.7.3 Tapping or hitting heads
        5.7.4 Inspection of pull fasteners
   5.8 Installation of Deutsch driveplans
        5.8.1 Sheet preparation
        5.8.2 Machine countersinking
        5.8.3 Driving the rivets
        5.8.4 Inspection
        5.8.5 Removal of rivets
   5.9 Skin deformation
   5.10 Countersinking
        5.10.1 Hi-shear rivet
        5.10.2 Nominal diameters for countersinks

Establishes the requirements for fabrication and inspection of rivets and fasteners and the procedures for riveting operations.

DocumentType	Standard
PublisherName	National Aeronautics and Space Administration
Status	Current

NASA KSC E 165 : 2009	ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
NASA STD 5005 : 2013	STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC DE 512-SM : 2012	FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA KSC STD E 0001 : 2008	DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR

MS20601 Revision J:1992	RIVET, BLIND, STRUCTURAL PULL STEM, SELF-PLUGGING, 100 DEG FLUSH HEAD, TYPE II
MIL P 8585 : LATEST	PRIMER COATING, ZINC CHROMATE, LOW-MOISTURE SENSITIVITY
MS 20603 : B	RIVET, BLIND, CHEMICALLY EXPANDED, 100 DEGREES FLUSH HEAD, TYPE 1, CLASS 2, STYLES A AND B
MS20470 Revision H:1993	RIVET, SOLID UNIVERSAL HEAD, ALUMINUM ALLOY AND TITANIUM COLUMBIUM ALLOY
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
MS20600 Revision J:1992	RIVET, BLIND, STRUCTURAL PULL STEM, SELF-PLUGGING, PROTRUDING HEAD, TYPE 2
MS20426 Revision L:1993	RIVET, SOLID, COUNTERSUNK 100 DEG PRECISION HEAD, ALUMINUM AND TITANIUM COLUMBIAN ALLOY