Name: NASA STD 6008 : 2008 CHANGE 1 2013
Brand: NASA

NASA FASTENER PROCUREMENT, RECEIVING INSPECTION, AND STORAGE PRACTICES FOR SPACEFLIGHT HARDWARE

Published date

01-12-2013

Publisher

National Aeronautics and Space Administration

DOCUMENT HISTORY LOG
FOREWORD
1. SCOPE
   1.1 Purpose
   1.2 Applicability
2. APPLICABLE DOCUMENTS
   2.1 General
   2.2 Government Documents
   2.3 Non-Government Documents
   2.4 Order of Precedence
3. ACRONYMS AND DEFINITIONS
   3.1 Acronyms
   3.2 Definitions
4. REQUIREMENTS
   4.1 Fastener Selection
   4.2 Approved Manufacturers and Distributors
   4.3 Receiving Inspection: Screening and CVT
   4.4 Manufacturer's Test Report (MTR)
   4.5 Certificate of Conformance (COC)
   4.6 Traceability
        4.6.1 Complete Traceability
        4.6.2 Partial Traceability
   4.7 Audits and Storage
   4.8 Specialized Fasteners
   4.9 Fasteners Critical for Mission Success
   4.10 Fasteners in Commercial-Off-The-Shelf (COTS) Hardware
   4.11 Quality Assurance Provisions
        4.11.1 Discrepant/Nonconforming Fasteners
        4.11.2 Certification Validation Testing (CVT) Inspection
        4.11.3 Visual Inspection
        4.11.4 Hardness and Tensile Tests
        4.11.5 Dimensional Inspection
        4.11.6 Chemical/Elemental Analysis

Establishes fastener procurement, receiving inspection, and storage practices for all fasteners used for spaceflight hardware that are procured, received, tested, inventoried, or installed for space flight by a NASA Center, by a prime contractor, or by any other spaceflight hardware developer.

DevelopmentNote	Supersedes NASA STD 6008(INT). (07/2008) Supersedes NASA MSFC STD 2594. (02/2017)
DocumentType	Standard
PublisherName	National Aeronautics and Space Administration
Status	Current
Supersedes	NASA STD 6008(INT) : 2006 NASA MSFC STD 2594 : 2002

NASA STD 5019 : 2016	FRACTURE CONTROL REQUIREMENTS FOR SPACEFLIGHT HARDWARE
NASA STD 5020 : 2012	REQUIREMENTS FOR THREADED FASTENING SYSTEMS IN SPACEFLIGHT HARDWARE
NASA JSC 27301 : 2009	MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE
NASA JSC 25863 : 2009	FRACTURE CONTROL PLAN FOR JSC SPACE-FLIGHT HARDWARE

NASM1312-6:2013	FASTENER TEST METHODS, METHOD 6, HARDNESS
NASA STD 5019 : 2016	FRACTURE CONTROL REQUIREMENTS FOR SPACEFLIGHT HARDWARE
NASA MSFC STD 3029 : 2000	GUIDELINES FOR THE SELECTION OF METALLIC MATERIALS FOR STRESS CORROSION CRACKING RESISTANCE IN SODIUM CHLORIDE ENVIRONMENTS
NAM 1312/108 : REV 1	FASTENER TEST METHODS, METRIC METHOD 108 TENSILE STRENGTH
NASM 1312-8 : 2001	FASTENER TEST METHODS, METHOD 8, TENSILE STRENGTH